If a step is part of a build configuration, that is used, but many steps
can be used as part of a deploy configuration.
In that case the active build configuration of the step's target must be
used, and that logic was duplicated many times.
Instead, let BuildStep::buildConfiguration take care of that logic. For
steps that are not offered for deploy configurations there is no
semantic difference, and for the others this removes code duplication.
Change-Id: I02f3bb50226590092cedcec02fce6fde9c7c6e63
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Make the build steps apply to more buildsteplists.
Task-number: QTCREATORBUG-19823 (and similar for other build steps)
Change-Id: I09d3b4b6ad99453cb587303aa78b46e8a4f360bb
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Fix crashes due to activeProjectConfigurationChanged signal sending
a nullptr.
Uses the same fix as QTCREATORBUG-18865, but in more places:-)
Task-number: QTCREATORBUG-18866
Change-Id: Ic71af5ed26b2a44339f0c687f3f46bfdf62c2489
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Add a subscribeSignal method to targets and projects that will make
sure all signals of all project configurations added during the lifetime
of the project/target will get connected (if the type matches).
Use this to connect to some signal in all BuildConfigurations of
a project and get rid of code that keeps connecting to the current
build configuration.
Use Project::buildEnvironmentChanged as an example and convert its
usages.
Change-Id: I689bcebac4b191bf3f8a18765bf18eaac371c5fe
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
This removes 900 lines of duplicated code, some duplicated checks at
runtime and some (minor) quadratic behavior when gathering display names.
canClone(), canRestore() and canCreate() and restore() use the same
pattern. Handle that on the core side once. Leave retore() virtual to let
the ios code unmodified (which is likely not needed, later...). Introduce
'Unclonable' and 'Uncreatable' flags to keep Android package installation
and WinRT deployment (non-)functionality unchanged.
Change-Id: I0325479aff818a4038b2f241ca733b8d8cd66f2f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This information can be used to get information from earlier steps,
which e.g. queried for android devices to deploy to.
Change-Id: Iefe1c9443915cb6211f86f98ff7aaf3cb75145ba
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Mostly done using the following ruby script:
Dir.glob('**/*.cpp').each { |file|
next if file =~ %r{src/shared/qbs|/qmljs/}
s = File.read(file)
s.scan(/^using namespace (.*);$/) {
ns = $1
t = s.gsub(/^(.*)\b#{ns}::((?!Const)[A-Z])/) { |m|
before = $1
char = $2
if before =~ /"|\/\/|\\|using|SIGNAL|SLOT|Q_/
m
else
before + char
end
}
if t != s
puts file
File.open(file, 'w').write(t)
end
}
}
Change-Id: I8ef73f4861069dcd7edf5e73b397d60609d4b476
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
This can use the faster route through QFileInfo::exist now.
Change-Id: Idb41b5d5185d7f02eacba498fb01f483d95e8d57
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@digia.com>
Allow multiple expanders to be registered for lineedits, e.g. a
local and the global ones, and actually show them.
Use a tree view in the chooser for somewhat more structured display.
Change-Id: I769f92144e5249f45e54381de52aa6973eb20118
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
The lldb debugger sometime returns misleading debug information
unless a dsym has been created.
This creates a build step to do it.
Task-number: QTCREATORBUG-11580
Change-Id: I7acf2e539cf189d0237e1d502fab2837f17aa489
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
