De-virtualize requestInterruptInferior() and let always
the master engine react to the request. interruptInferior()
diverts to the active slave in case of the combined engine.
Change-Id: I5d62cf9379c8a452132827897a9ac51e4027f595
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This removes the setupSlaveInferior() synchronization point which
wasn't really needed anymore as it was always triggered in
response to a notifyEngineSetupOk() of the master engine.
Change-Id: I24faec36b180fa961e10dfd88fe4d874f7310140
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Each engine has now the RunTool pointer, not just the master.
Change-Id: I6bab026998d5da5da82224bfaf4a93d3cfb3a898
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The only use left was a not-so-important debug message.
Change-Id: I91bd1b744fb2f173037777461dd15e7720421ccc
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The functionality has been needed for asynchronous processing
which are in RunWorkers nowadays, where the functionality is
provided by the general RunControl framework.
Change-Id: Id18f693935cd6faf5b25883dfeaace0dd691f6a7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The idea is that they shouldn't change after start() to
be re-usable for an additional run later.
Change-Id: I272fc975657b0d8b5b13a07d58bd0b626868d32e
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and apply even more force on the second trying by forcing
ramp down of the runControl itself instead of hoping that it
would pick up hints.
Change-Id: I9d0f4130cb9a137b91c9fa81c3d255f236f98be0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
There was almost 1:1 overlap with DebuggerRunTool::is{Cpp,Qml}Debugging,
use one version only.
Change-Id: I4a8f2b7005d3f2e440cdab3eaf6ac476af894308
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The users (typically target specific DebuggerRunTool derived classes)
are meant to use the individual setter functions nowadays, not the set
up the full structure, so the members are a true implementation
detail now.
Change-Id: Ida04801e3230a2fe8bbadde8845e58c3077c87a5
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It is still needed with LLDB.
Task-number: QTCREATORBUG-18723
Change-Id: If78dcbf8e074add969c403c37193c9f4ce857625
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... and replace it by direct uses of ProcessHandle::activate().
Change-Id: I7beffba7bfbeff72a81b8699ff54a311a74ce1a3
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
* Aborting a core dump debugging is a valid state
* Do not try to abort more than once (happens on shutdown)
Change-Id: I075409b3fa1231420fcd72706b18eaa0383fd4f2
Reviewed-by: hjk <hjk@qt.io>
Not needed anymore in the world of RunWorkers.
Change-Id: Id7fb24fece6acb03de12f2677dd99a05c513e7a4
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Note that this changes the startup timing in the StartupOnNetwork
case slightly, as the application launch is now triggered in
parallel with the gdb launch.
Change-Id: Iaa0b60b8c478eb47abb6e93fbd3b326e0acdd13b
Reviewed-by: Denis Shienkov <denis.shienkov@gmail.com>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This moves all of the RunControl implementation into a single
RunWorker, not yet splitting it up into separate RunWorkers
which is the final goal of this series.
Change-Id: I7373105603505aa4fffd7fe5ff0145f0128b34bc
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
*** UNEXPECTED STATE TRANSITION: "State changed from DebuggerFinished(22) to DebuggerFinished(22) [master]"
Change-Id: Iddacafbe337b95aa441aecbaf3ebf85c08a83d81
Reviewed-by: hjk <hjk@qt.io>
There were only two used target states, and in case of mixed
debugging all parts of the machinery better agree on the
direction. So one bool in the (shared) runTool is sufficient.
Change-Id: Iffbf1651b82dde707cfc37d8da9d3da573b34b76
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The parameters belong to the run control, they should not
be triplicated in case of a combined engine.
Change-Id: I4dd84220edbd7a44b902cc52627fe01d0568db75
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This increases re-usability of activities like 'port gathering',
and makes their use less dependent on actual device implementations.
Change-Id: I017cb74874f2b38c487ba2d03906a675d5618647
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Forward all tool and target activities to run control, and initiate
further state transitions (only) from there. Also, make sure
tool/target's on finished() triggered on all finishing code paths.
After that, the base state handling is sufficient to handle remote linux
running and debugging.
Change-Id: I0150ef249c9ad0b7b8ac7192be6dc860c9ca8fc5
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Add some customization hooks to make tools aware of target errors
and vice versa.
Change-Id: I4d815087297a3fa1d1d6d52daeed7c4ae0f624bf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
'prepared' got renamed to 'reportPrepared' in the mean time.
Change-Id: I2426e8ab156df642525d42feeedcd3692c7c8ac8
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Aim is to replace it with its ProjectExplorer::RunControl base.
Change-Id: I30f837050e7c016887dc4b6cfef10b947f4f88ed
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It's tool specific, so put it into the tool (only) related code.
The additional level of indirection will go again, plus the original
one will be removed once the *DebugSupport classes can directly
use DebuggerRunTool as base.
Change-Id: Ieaa386a0f7d724b09cedaaba8fb7d1e6dc4ad55b
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
The underlying assumption may be violated soon, make it
easier to debug if it breaks.
Change-Id: I7511d5677659e266f2d01db8bafb46bcd93d7f7b
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Make DebuggerRunTool accessible to downstream users, but remove
the non-standard handleApplicationOutput from the run control
itself to move it closer to the base run control.
LogChannel and Utils::OutputFormat should merge at some time.
Change-Id: I47b0f0067e1427b25e47036c3d4bc6ed5eed6189
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The debuggerengine has an internal state machine. This change provides
the state name instead of the states number for debugging purposes.
Change-Id: Ic8d63902e83e3905d7880a703302cb597174460b
Reviewed-by: hjk <hjk@qt.io>
No practical change as the only case that is used so far are local
setups on Mac. It's a conceptual change, though, giving concrete
RunControl implementation the chance to act "sensibly", e.g. by
raising a locally running simulator control in case of remote setups
or such.
Change-Id: I5679428934fe08b8c9756f3906ee3d9073278822
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Fixes regression introduced in f8ad72deb3: Slave engines don't
have a RunControl pointer of their own, use the master pointer.
Change-Id: I1c695a1454cafc3532fb1b79374fac4f3ead607e
Reviewed-by: hjk <hjk@qt.io>
Also, use qint64 instead of quint64, as this is what Qt uses.
Keep 0 for invalid PIDs, even if arguably -1 would be better,
but Qt uses 0, too.
Don't move 'toString', instead inline it into the only
caller, keeping translations intact.
Task-number: QTCREATORBUG-17596
Change-Id: Ie9411ea1d2031a5ab0a99bcb3ff48ee430afe254
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Unify the watchPoint() interfaces, move the combined
implementation to the DebuggerEngine base.
Change-Id: Ic93aa760e7258197aed5eb7bfea257a40012cccf
Reviewed-by: hjk <hjk@qt.io>
