Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Since we do not support Qt < 5.15 anymore, and as a first step
for getting rid of our special FindQt5.cmake.
Change-Id: Icc5dbaf9b0a3a622b1f609ff114b9decb6d2856c
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Don't crash if qml scene instantiation fails (e.g. when built with Qt 6
and Qbs). Just fail the test.
Change-Id: I444a6a68382c5acc9ca9faf9ce7c489a87fa5c98
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
We don't want to dedicate the whole resource file system to QML.
Change-Id: I4c7e4af7aeeab00f44c5244e99949a90abb032cf
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
- Remove code for Qt below 6.2 from c++ sources and CMakeLists.txt
- Remove Qml code from .qrc files
- Qbs: Add qt.core.resource_data Groups for Qml code
- Remove OpenGL shader .frag and .vert files
- Remove Qml import version numbers
Change-Id: I3bd1cd95381e66c98ee3af4259e89b0b1eff0709
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Some of our auto tests fail, so add an EXCLUDE_FROM_PRECHECK option for
add_qtc_test, which sets a corresponding label on the ctest, and exclude
these when running ctest on COIN.
Disable the Googletest based unittests for now, they are inconsistently
failing on CI, e.g. sometimes timing out after 60 seconds for tests that
usually take only a fraction of a second.
tst_perfdata from the perfparser submodule also fails. Temporarily
disable it explicitly, until the EXCLUDE_FROM_PRECHECK change can be
merged there.
Change-Id: I7e9d7aded75bbe8800f82f7aa125c181271a2a1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
instead of QTEST_MAIN. Reduces the initialization that is done by the Qt
test applications, and can also reduce interference with normal OS
operations like the current window loosing focus.
Change-Id: If88f289281aa1c8703ac7d4dbe0799d067c16588
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
...by setting the RHI backend to "opengl". That is preliminary.
QQuickWidget will work with other backends such as "d3d11", soon (likely
with Qt 6.4).
Change-Id: I57e1869e837794fa887894cae0905a548f9e436c
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Removes qmake as a build system for building Qt Creator itself.
Keep them for some tests that are not completely moved to CMake yet.
Change-Id: I846c6ef65626b6dfae6375fdc85d00677aa8c2fb
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Prior to CMake 3.11, the SOURCES could not be omitted when
calling add_executable.
This change ensures that SOURCES are passed, at least when
building against Qt < 6.2.
Change-Id: I83bd82fe12364523ce6954d145b632df7210d118
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Change faulty include from system to local
amends: 3ebe5dbb99
Change-Id: I466e683137b5e95f5b70fb2efa3dda1a77af8a04
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Use the CMake-based qml API to create the
"QtCreator.TstTracingFlameGraphView" module.
This uses qt_add_qml_module, which was introduced with Qt 6.2.
For Qt 6.1 and below, everything compiles and runs like before this
change.
Change-Id: I7b1d7109c5fcff55c7be4b431f21281a63d13332
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use the CMake-based qml API to create the "QtCreator.Tracing" module.
This uses qt_add_qml_module, which was introduced with Qt 6.2.
For Qt 6.1 and below, everything compiles and runs like before this
change.
Change-Id: I4d63f9f724d0628cfaab9d1164c0d575f15d15aa
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This makes the tracing lib, its tests and the three plugins which depend
on the lib compile with Qt 6.
The rectangles are not yet shown most likely because some OpenGL
specific code was #ifdef-ed for Qt 6. That code needs to be
reimplemented on top of the new Scenegraph API, using the RHI instead of
direct OpenGL in a follow-up patch.
An assertion failure in QQuickWidget::createFramebufferObject() needs to
be fixed as-well.
The code still builds and runs assertion free (and the autotests pass)
when built against Qt 5.
Task-number: QTCREATORBUG-20575
Change-Id: I47ebb477823de2f0d27329dac7c292a466cea1d7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Move Tracing Qml Types into the "QtCreator.Tracing" module.
Move QmlProfiler Qml Types into the "QtCreator.QmlProfiler" module.
Move PerfProfiler Qml Types into the "QtCreator.PerfProfiler" module.
And tst_flamegraphview ones into QtCreator.TstTracingFlameGraphView.
... in preparation to register the types declaratively.
Change-Id: Ic0e3863d09b3426fa5b7419116625ad49b817dcf
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QQC2's scroll view does not allow clicking through the scroll bars even
if they are invisible. That's a shame, but we're not going to fix it in
QtCreator. Rather, choose locations to click on that are outside of the
scroll bars.
Also, wait for the window to be exposed before manipulating it.
Change-Id: I7d8de1a6be7dec88c5d0ac1707341b543e385a9e
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This is a better fit than a custom Button + Menu combination.
Fixes: QTCREATORBUG-22579
Change-Id: Ie6f8a7ef2ce0da67a16bc365d6f619a11bc56221
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Based on Tobias Hunger's work from a few months ago.
The CMake configuration needs libclang and Qt paths specified as
CMAKE_PREFIX_PATH.
Auto tests are run with "ctest". At the moment the pass rate is 87%.
Change-Id: Iba98e39bf22077d52706dce6c85986be67a6eab0
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Instead of laborously calculating which properties have changed under
which circumstances, we can just connect the signals of dependent
properties. This will give us a few false positive signals at a greatly
reduced risk of missing some actual change. Also, the number of expanded
and collapsed rows will always be determined by the content of the
model. We don't need separate signals for those.
Change-Id: Id8495ee525a91405b039fd032509afa125f96412
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Having an additional MouseArea as child of a ScrollView or a Flickable
is not well defined and leads to inconsistent behavior on different
systems. We can easily catch the relevant events in the FlameGraph item
itself. Also, don't redirect the typeSelected() signals through the
model. They don't belong there.
Change-Id: I77c17977b5a51d57ccd2ef880d3d6c6a604b7f78
Task-number: QTCREATORBUG-20573
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This allows us to share code between the two, in particular the QML code
for the Details window, and the theme code. This way we can potentially
deduplicate some code.
Change-Id: I3a0d26b18488bd2a46b5b077b5b5d79ac2dfc5ce
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
