The tools' ability to hook into processing of the output is
retained by making the function virtual.
Also remove the unusual overload of the RunControl::appendMessage
slot and the signal of the same name by renaming the signal.
Change-Id: If3c3cc2dd9c933169dc30b16e3165c9b3cf1440e
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This solves the ambiguity between 0 and -1 being the "invalid" port.
Change-Id: I3bac11dd4117bb1820fbd58186699925b73df1c5
Reviewed-by: hjk <hjk@theqtcompany.com>
On the user-visible side, only the 'Analyze' mode button disappears,
and instead a combobox to switch between different tools in appears
in the Debug mode toolbar.
Internally, that's quite some re-organzition: The centralized
'Analyze mode is busy' flag is gone, allowing us to run e.g.
ClangStaticAnalyzer and MemCheck in parallel.
Analyzer tools and debugger now share the same mechanism to
generate/load/save dock widgets.
Analyzer tools now create and handle their own start/stop button
when appropriate. In general, Analyzer tools can create/handle more
than one run control at a time.
Further consolidation is possible, e.g. RunControl state handling
could be merged into the base ProjectExplorer::RunControl to
avoid the still existing duplication in ~15 instances.
Change-Id: I91e5940ebc4211f98056d507cf2f7b5f8efe7f07
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The functionality can be provided by producing a suitable Runnable
in the derived classes directly.
Change-Id: I7b8e8fe33fffd2b00176b6cf6633eca4e152e466
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
* SysRoot can always be determined from kit.
* Pass around RunMode as extra parameter
not as part of AnalyzerStartParameters.
That's closer to the pattern used elsewhere.
* Environment was always initialized from the runconfig's
EnvironmentAspect. The tools can do that directly.
* Provide setter for display name for cases where
it is not equal to RunConfiguration::displayName
Change-Id: I811a0d7cdeb55cc37a16a593b3942abb567a2150
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
This removes the need to receive messages from the application via
stderr. The "Connecting to socket" is still parsed, but only for
diagnostic purposes. If it doesn't arrive, the profiling will still
work.
Change-Id: I022691293da2a1e671ba1263bc76e4044bf1a5b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We have tcp, local, and native by now. We have to expose that in a
clean way.
Change-Id: I0ce7be693aa7f47ebea7abe435a224a176b6c94b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The services need to be loaded before the first QML engine is created.
The first QML engine may be created before a client connects. When the
JavaScript debug service is loaded the engine is put into interpreter
mode as we don't support debugging in JIT mode. Profiling, however
should be done in JIT mode, whenever possible.
Thus, in order to avoid the loading of unnecessary plugins and to get
better results from the QML profiler we tell the debug server which
services we expect, even before the client connects. Qt 5.6 will support
additional command line arguments to specify the services and this
change uses them.
Change-Id: I6dcee016c39995e9adada6eaf0e39d8299c9b7e7
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
It's always a pain to search for the only RunControl that's called
"engine" half of the time.
Change-Id: I4cece9f8958ff989925d9efaaf6fb41731842647
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Those were misusing the flag to distinguish between local and remote
startup and that was unnecessary as the LocalQmlProfilerRunner is only
instantiated for local startup anyway.
Change-Id: I030931c9db9e8482199e4fbd04665a6c973b67f8
Reviewed-by: hjk <hjk@theqtcompany.com>
This is what it is on the top level. The change makes it obvious
that in the valgrind(-derived) plugins the value is later wrongly
used to make a decision on whether to run the valgrind process
locally or remotely. But that's isolated in valgrind now and
can be fixed there.
Change-Id: I6fa5e669dec1f9e2cdebe42a1591d15144082a21
Reviewed-by: Anton Kreuzkamp <anton.kreuzkamp@kdab.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
In order for plugins to create a RunControl for locally running
applications that do not use LocalApplicationRunConfiguration it is
required to export an API that takes care of the internal setup. Also this
removes the hard dependency on LocalApplicationRunConfiguration.
We don't want to expose Internal classes in public API, so we have to
make QmlProfiler::Internal::QmlProfilerRunControl and
QmlProfiler::Internal::QmlProfilerStateManager public.
Also, AbstractQmlProfilerRunner doesn't do anything useful and can be
removed.
Change-Id: I0403e5b17e14ac894addd818ad7b249c51a8ed8d
Reviewed-by: hjk <hjk@theqtcompany.com>
Reviewed-by: Benjamin Zeller <benjamin.zeller@canonical.com>
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>
Mostly done using the following ruby script:
Dir.glob('**/*.cpp').each { |file|
next if file =~ %r{src/shared/qbs|/qmljs/}
s = File.read(file)
s.scan(/^using namespace (.*);$/) {
ns = $1
t = s.gsub(/^(.*)\b#{ns}::((?!Const)[A-Z])/) { |m|
before = $1
char = $2
if before =~ /"|\/\/|\\|using|SIGNAL|SLOT|Q_/
m
else
before + char
end
}
if t != s
puts file
File.open(file, 'w').write(t)
end
}
}
Change-Id: I492792bb9e5655c55795e938031efc557c9a462f
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
QmlProjectRunConfiguration is now derived from
LocalApplicationRunConfiguration.
Change-Id: Ieddac63ff9832771ed141c3f0aff1bcc0313f6bf
Reviewed-by: hjk <hjk121@nokiamail.com>
And adjust the message in the appliation output to take the exit status
into account.
Change-Id: I1b7507fdc8ff6fa7ec3db48dba72ad723f124fc3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
#!/usr/bin/env ruby
Dir.glob('**/*.cpp') { |file|
# skip ast (excluding paste, astpath, and canv'ast'imer)
next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
s = File.read(file)
next if s.include?('qlalr')
orig = s.dup
s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
res = $&
if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
res
else
res.gsub!('} else', 'else')
res.gsub!(/\n +} *\n/m, "\n")
res.gsub(/ *{$/, '')
end
}
s.gsub!(/ *$/, '')
File.open(file, 'wb').write(s) if s != orig
}
Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>
