To run it requires either designpreview.apk installed
on the device or apks placed in
<QTCREATATORDIR>/share/qtcreator/android/qtdesignviewer/
Apk filename should follow designpreview_$ARCH.apk
Task-number: QAA-512
Change-Id: Ida955b0fac519112d4623166677a7ba8e9afb1f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
BuildStepConfigWidget with manual tweaks is good enough.
Also move AndroidDeployQtStepFactory to the usual place at the
end of the file.
Change-Id: I92af31ef77f986b6fcd84a14ac62b70e2da32ff2
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The only reason it was required to be in Core plugin, was its use of Id,
which now is available in Utils.
Change-Id: I66ce863c24924e6448d339b3422538a7fe167336
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
It was already only one id string with two names. Since it is not
an id for the factory but the id of the created run configuration,
settle of runConfigurationId() as accessor.
The factory and id fields in RunConfigurationCreationInfo were
redundant. factory always implies (runconfiguration)id (but not
necessarily the other way round, in theory different factories
are possible for the same runconfiguration type for different
devices). So drop the id field here.
In one case now factory pointers instead of ids are compared, but
this is neutral there as this happens in a context of a fixed Target,
device and project are fixed there, so id and factory are equally
unique.
Change-Id: I859aa91486a2dd4abfc7369540a3322d6ec6260d
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Current autoDetected Android debuggers list is never cleaned, if one
sets up many NDKs it could get really big and messy. This change tries
to keep it clean from old or duplicate entries, as well as keep it
chained to the autodection mechanism of Android toolchains and kits.
Relies on 291807 to allow autoDection for kits, toolchains, debuggers
to work out-of-box.
Change-Id: I320a021f0435d80fd3d56c060caa316def533afa
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Based on change 286266, we can find a correct NDK version for Qt for
Andriod version. This change allows Android plugin to get relevant NDK
information and registers appropriate toolchains and kits settings.
[ChangeLog][Android] Automatically use correct NDK version
corresponding to used Qt version.
Task-number: QTCREATORBUG-23583
Change-Id: Ic6b0d7a1ae8962c075b77498de88e018a008ac3e
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
If no Qt for Android version is installed don't show the config info
bar.
Fixes: QTCREATORBUG-23580
Change-Id: I880594701cdd6d5c0fc0586b5e49cc6a66efedb7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Automatically download Android SDK Tools to default path
used by Android Studio, then essential packages will be installed
using the sdkmanager tool. Automatic installation can also be
triggered by an added button in the settings page.
Essentials packages include NDK Bundle and other NDK versions
required by previous Qt versions.
An sdk_definitions.json file holds download paths for SDK Tools,
and other (Qt version <-> essential packages) combinations.
[ChangeLog][Android] Automatically download SDK Tools, NDKs and
all essential packages for Android builds.
Task-number: QTCREATORBUG-23285
Change-Id: I90e7aafecd017d2bdc959e403711d9d440a6bbb2
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Previously, AndroidManager::updateGradleProperties operated always
on a project node found using target->activeRunConfiguration()
which might or might not be the one that will actually be used
after the build.
This here still does not address the problem that the activeRunConfiguration
may change but introduces a way to specify the relevant node, and tries
to use the right one when available.
At some time, this could be developed into a real solution, e.g.
by invalidating the cache on build key changes.
Change-Id: I37a3d73e9ad3615025e4def2493f683d11add3c6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
This combines two of the previous three paths to create run workers,
and refers to RunConfigurations by id, not by type where possible
to decrease coupling between the classes.
Only allow "type of run configuration" and "type of device"
as the only possible kind of restriction and require a uniform
RunWorker constructor signature.
Adapt user code to fit that pattern.
Change-Id: I5a6d49c9a144785fd0235d7586f244b56f67b366
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... of SimpleRunWorkerFactory.
This requires being explicit about the SimpleTargetRunner worker
default, but makes the template re-usable for current users of
RunWorker::registerWorker() which I would like to phase out now,
for less variations in the RunWorkerFactory setup.
Change-Id: I32638437e5bb29f143650f5fde706711ab25accf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... by using factory members in the plugin pimpl. This also
(intentionally) transfers ownership of the factories to the
plugins, effectively progressing on the "FIXME:"
in runcontrol.h:164.
Change-Id: Ia75ee034d25a75b5d5bff6b2fa2b3471347d1a14
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and use in as replacement for RunConfiguration::addRunWorkerFactory.
It is still convenient to have a simple way to set up run worker
factories for the typical "just run for this configuration" case,
but it's even better if it follows the nowadays predominant pattern
of keeping factories in the plugin's pimpl.
Also, it turned out there were two copies of
QmlProjectRunconfigurationFactory code, one is enough.
Change-Id: I0b28c4ea18d0f52165a49f6133dc8687a3b9c7cf
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Also, construct the KitManager implicitly when the first
KitAspect is created. Ramp-down is still explicit and
somewhat odd.
Change-Id: If1506e1d0789ecabbaad2d8008851d0b42c5218b
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Except for the DesktopDevice, which is kind of special. Also try
a bit to make (and partially fail at doing so) naming and code
structure (#include, use of namespaces) more similar to each other.
Change-Id: I9fe266e706b72c14f59ff03ca1ae02dba3adcc71
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
... to matching Qt and tool chain.
This is the only remaining place in Creator that refuses to restore
deploy configurations in such cases, and arguably there's no point
in dropping such a configuration as a whole, the individual steps
(i.e. AndroidDeployQtStep) can and do chicken out at deploy time
if there's no Qt version in reach.
Also move AndroidDeployConfigurationFactory to the plugin.cpp,
no need for a .cpp/.h pair for the remaining few lines.
Change-Id: If6ea7cf9573149c88c05629997ac582dc90d1e48
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The remaining dependency is hacked into QmakeProjectManager
by using a compile time-only dependency on androidconstants.h.
Change-Id: Id78125137bc75c145a072bc753276abbf0029647
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
There is a recurring special case that certain run controls depend
on the presence of specific RunConfiguration (which in turn has
it's own restriction on e.g. target or project types) but have no
further restrictions.
Make it easy to handle that case.
Change-Id: I2e86f366591b02003f720dcc00b4c52bb2f34e00
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The RunConfiguration does not depend on qmake anymore.
This makes the factory trigger in theory for non-qmake, too, but since
we still not support other build systems for android, it has no
practical consequences yet.
Change-Id: I95e4e5a81f5b405a52fa42723b25a0a1473e78c6
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
As all Runnables are known to be StandardRunnables, this here
essentially replaces all .is<StandardRunnable> by 'true'.
.as<StandardRunnable> by no-op, and fixes the fallout.
Change-Id: I1632f8e164fa0a9dff063df47a9e191fdf7bbb2e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The naming scheme of the internal object was changed
to the usual pimpl pattern.
Also setup device update connection in the device constructory
Change-Id: I5cbb7a9d870a7d1f0e91e54f2ad6dfb95ea63e37
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
There's nothing Qmake related in there (anymore?).
Change-Id: I8842d4824065cf3cba61d50b6f333ec3b52e3851
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
- Avoids the hassle of QRC files and manually registering mime types
- Avoids performance regressions because of mime types that are
registered after mime database has been used
- Makes it technically possible to detect that a disabled plugin could
handle a mime type if it was enabled
Change-Id: I373008b1b56e9c6b4853055f20b3eeb112a6eff9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: hjk <hjk@qt.io>
