Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This is a step towards properly supporting multiple debugger
sessions side-by-side.
The combined C++-and-QML engine has been removed, instead a
combined setup creates now two individual engines, under a single
DebuggerRunTool but mostly independent with no combined state
machine. This requires a few more clicks in some cases, but
makes it easier to direct e.g. interrupt requests to the
interesting engine.
Care has been taken to not change the UX of the single debugger
session use case if possible. The fat debug button operates
as-before in that case, i.e. switches to Interrupt if the
single active runconfiguration runs in the debugger etc.
Most views are made per-engine, running an engine creates
a new Perspective, which is destroyed when the run control dies.
The snapshot view remains global and becomes primary source
of information on a "current engine" that receives all menu
and otherwise global input.
There is a new global "Breakpoint Preset" view containing
all "static" breakpoint data. When an engine starts up it
"claims" breakpoint it believes it can handle, but operates
on a copy of the static data. The markers of the static
version are suppressed as long as an engine controls a
breakpoint (that inclusive all resolved locations), but are
re-instatet once the engine quits.
The old Breakpoint class that already contained this split
per-instance was split into a new Breakpoint and a
GlobalBreakpoint class, with a per-engine model for Breakpoints,
and a singleton model containing GlobalBreakpoints.
There is a new CppDebuggerEngine intermediate level serving as
base for C++ (or, rather, "compiled") binary debugging, i.e.
{Gdb,Lldb,Cdb}Engine, taking over bits of the current DebuggerEngine
base that are not applicable to non-binary debuggers.
Change-Id: I9994f4c188379b4aee0c4f379edd4759fbb0bd43
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: hjk <hjk@qt.io>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
There was no actual error in practice, as the handling was lumped
together with the tracepoint checkmark, which (accidentally) did the
right thing in all cases.
Change-Id: Icf12aaf0c48855b747d25a0252c8215e259c4227
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
... and remove functions that have not been in use since
switching the BreakHandler to a TreeModel.
Change-Id: I1b4170b4a837284aece7c0ea1a4d76c1127d6503
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Remove re-declaration of debug operator for BreakModelId.
Remove also extra `;'.
Change-Id: I2fe9460230b73ab845f4834408e741341f6143de
Reviewed-by: Nikita Baryshnikov <nib952051@gmail.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
The actual data is now in a TreeModel. As interface to
individual breakpoints there's a new Breakpoint class
essentially providing a checked handle.
On the user code side breakHandler()->foo(bpId) is
replaced by bp.foo().
Change-Id: I82f435bad6301fce85a1d82bf6bf39e9ddba511e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Refactor QML Signal Handler to QML Signal Emit. This is because the
debugger breaks when a matching signal is emitted irrespective of
whether there is a handler connected to the signal.
Change-Id: I852ace75c1962290717ed127ac5938d7505b9a7e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: hjk <qthjk@ovi.com>
Getting the #include directives ready for Qt5. This includes the
new-project wizards.
Change-Id: Ia9261f1e8faec06b9285b694d2b7e9a095978d2b
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
Check on session restore and add.
In particular, suppress watchpoints at 0x0,
which hang gdb.
Change-Id: I648f53a709fabdebe641e478f367f1354a315ab1
Reviewed-by: hjk <qthjk@ovi.com>
Previously break on exceptions was always enabled. Now, the user
can add a breakpoint on Javascript Exceptions from the breakpoint
window in the debugger.
Change-Id: Ia9ee813d2fccf89b607fe1dcbad47b4084155a48
Reviewed-on: http://codereview.qt-project.org/6348
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
The user can request Javascript break on event. The user can provide
this info in the Breakpoints Window and provide the slot which will
be called when the event occurs. For example: specify "onTriggered" if
you need to break on Timer triggered event.
Change-Id: If936d7402f5978a182132fdcca75515588364e16
Reviewed-on: http://codereview.qt-project.org/4758
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
The contents of the "original location" field is sometimes worse than
what we collected otherwise. Use it only if it points to a readable file.
Change-Id: I6c7229ead803e9f7970b8322f29469bfbe350b5d
Reviewed-on: http://codereview.qt.nokia.com/1072
Reviewed-by: hjk <qthjk@ovi.com>
Add context menu to add a 'message tracepoint', that is,
a trace point that outputs a user message and continues.
Intended to be a replacement for manually inserting
a qDebug() into the code to understand the call sequence.
Yet to be implemented for gdb.
Change-Id: I1c303001421fbbae74d98d15d52718579350db6e
Rubber-stamped-by: hjk
Reviewed-on: http://codereview.qt.nokia.com/756
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
<MULTIPLE> happens in constructors, inline functions, and
at other places like 'foreach' lines.
Change-Id: Ifb89b659d279f257ba8295b80a35d605820ec54b
Reviewed-on: http://codereview.qt.nokia.com/498
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: hjk <qthjk@ovi.com>
