Use this back-pointer to validate the buildconfiguration.
Use the validated buildconfiguration consistently. In theory
the buildconfiguration is valid at all times (since deleting
a buildconfiguration will trigger an update to the parameters
in BuildDirManager), but better be safe.
Change-Id: I614d9ce16e4974a9437a2f44756f01c71a5ede13
Reviewed-by: hjk <hjk@qt.io>
This lets users build the executable corresponding to the currently
active run configuration. It's functionally equivalent to locating the
corresponding node in the project tree and choosing "Build" from the
context menu.
Fixes: QTCREATORBUG-22403
Change-Id: Ic2b729c7ce17f1ad944dc06746bb9d6db90b6c61
Reviewed-by: hjk <hjk@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For the command and the working directory.
Change-Id: Ia69dc7100aeb57bb6e1b35f4dd4f3cf3763d8cda
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This provides correct deployment information as seen by the build system
when Qt Creator cannot retrieve it directly.
It's most useful for autotools and cmake projects, but can also help
with qmake in certain edge cases.
[ChangeLog] It is no longer necessary to provide a
QtCreatorDeployment.txt file when using CMake projects with remote Linux
devices.
Fixes: QTCREATORBUG-21855
Change-Id: I27e07a45dd1565e489f4b573cc3fff8191c57d9b
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Requirements:
- NDKr19 or newer
- Qt 5.12.1 or newer
QtCreator supports the following variables:
- ANDROID_PACKAGE_SOURCE_DIR
- ANDROID_EXTRA_LIBS
Be aware, that there is a lot of magic done on QtCreator side, and you
can't use only cmake to build an Android APK.
[ChangeLog][Android][CMake] Add Android support for CMake projects.
Change-Id: I1d351976ed56f424c2bc972f4ff7b5968147a2ed
Reviewed-by: hjk <hjk@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
createGeneratedCodeModelSupport() can now be marked const and is renamed
since it doesn't create GeneratedCodeModelSupport instances any longer.
Change-Id: I8b4b8e8980623841889bd3a03e5fe8c1d4342cb3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Also change method names from update...() to create...() and mark as
const. This communicates that the objects the methods are called on are
neither altered nor updated.
Change-Id: I29e84dc398ded3ffcbf90741227362c6b4be2bf9
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Centralize gathering the kit, toolchains and qt version.
Change-Id: I6bd586ac7925e2ee556fd119f1dab096cd500e41
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Less use of activeBuildConfiguration and activeTarget.
Change-Id: I9fa77a0084c5701e86530e4f9845c47baddaed4e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We checked the command line from the project manager for "-std=X" and
friends to figure out the language version to use. However, if such a
flag was not provided, we assumed the latest version we support. This
could conflict with the actual version of the compiler and its
predefined macros.
Figure out the version by inspecting __cplusplus/__STDC_VERSION__ in the
predefined macros of the toolchain. The MSVC compiler is an exception to
this, as it does not seem to properly set the value - check for
_MSVC_LANG if possible, otherwise simply assume some versions as before.
While at it, add also support for C17/C18 and the upcoming C++2a.
Task-number: QTCREATORBUG-20884
Task-number: QTCREATORBUG-21188
Change-Id: I464ffcd52d2120c0208275a050e82efda44fae1c
Reviewed-by: Ivan Donchevskii <ivan.donchevskii@qt.io>
It is often possible to user (member) functions or members directly.
That improves readablility and potentially reduces the total number of
symbols.
Also use qobject_container_cast at places where it is appropriate.
Change-Id: Ia2591bca356591e001e2c53eeebcf753e5bc3c37
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Report project-specific warnings about the kit used in Project Mode.
E.g. a python project should not complain about missing toolchains,
while a qmake project should.
Change-Id: I5ce6742683cdeffc7ff3f1a3e8f0b89aee9aa0b4
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
The previously per-Project/RunConfiguration changing meanings of
BuildTargetInfo::buildTarget have by now been split
into separate values in BuildTargetInfo:
- buildKey a handle to one item in Target::applicationTargetList
- displayName a user-visible string in the run settings page
The buildKey was tweaked to coincide with the previous 'extraId',
i.e. the non-RunConfiguration-type part of the project configuration
id that (still) use id mangling.
This allows replacing the cases of locally stored seven different
versions of buildKey(-ish) data by one RunConfiguration::m_buildKey,
and do all remaining extraId handling in RC::{from,to}Map only,
i.e. remove the base ProjectConfiguration::extraId() virtual and
remove the "re-try fromMap with mangled id" hack entirely.
The id mangling is still used to temporarily maintain .user file
compatibility in some cases for now, but should be replaced by
storing the build key and the RunConfiguration type soon. Qbs
already changes in here to only use the uniqueProductName as
buildKey, without the previously added display name which is
stored as part of the ProjectConfiguration already.
It turns out that RunConfiguration::buildSystemTarget was intended
and used to retrieve an item from the Target::applicationTargetList
for some configurations, coinciding with what buildKey does always.
So use that insteand and drop RunConfiguration::buildSystemTarget.
There is clearly is further consolidation potential left.
handling of (default)displayNames is still a per-runconfiguration
mess and there is further consolidation potential left.
Change-Id: I448ed30f1b562fb91b970e328a42fa5f6fb2e43e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Funnel all relevant data through target.applicationTargets() as
done for the non-local CMake-supporting setups and QBS already.
There is cleanup potential left for later changes.
Change-Id: I49ed6abd98c058a7fd1545e41b3bcd6ecb758a8b
Task-number: QTCREATORBUG-19985
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The possibly intented flexibility e.g. to have different project types
share the same idea of a common context was never used, in all cases
we had a 1:1 relation ship between project ids and ids that were used
as context. This led to oversights like the one fixed in 60fb35a2.
This patch here uses the project id unconditionally as context and
drops all context ids. If we'll ever have the situation where the
original flexibility was needed, Project::projectContext() could be
made virtual and overridden were needed.
Also, the context was never modified for any given project, so the
updating machinery is not needed.
Change-Id: I3f7fac0ed5e4704e126558987c48577f26082dfd
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Make Project::files take a standard function to match files with instead
of an enum (and a std::function).
Change-Id: I6a24e40dba0e972ff96c0a57e775d2377e2545e0
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This lead to <Headers> entry being missing from the project tree.
Task-number: QTCREATORBUG-19333
Change-Id: Ice3bab6d92aaa3799e66800cbae0bacd57537322
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This got broken when moving the BuildDirManager from the BuildConfiguration
into the Project itself.
As a side-effect this patch also fixes the persisting of cmake state.
Task-number: QTCREATORBUG-19075
Change-Id: I1fc696097b09f5285e67f20885eb1fa27504990b
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
This builds on top of 08677c0b01 and
fixes one more code path to go through a common entry/exit point.
Change-Id: I1d00fa9242f247028e5d3b0ef3b5fe1d3f4cb03d
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
The directory tree scanner and the project parsing work independently of
each other. Add logic to combine these two sets of results into one
parsing state.
Change-Id: I46e94f0e866b40ee7225235c536c742cecf11b45
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Since 131c7a1 the executable and base working directory property of
CMakeRunConfiguration objects is no longer set when the project data
is updated. At least the executable is required in the AutoTest plugin.
Change-Id: I31c4cb37983d3983664d178c0f8c08d491f719ad
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The old code model expected the macros as C++ formatted text
("#define Foo 42) but newer targets like the Clang codemodel expect key
value arguments like "-DFoo=42". So instead of parsing the text again and
again we use an abstract data description.
Task-number: QTCREATORBUG-17915
Change-Id: I0179fd13c48a581e91ee79bba9d42d501c26f19f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
qmake from Qt4 does not provide C++ standard and
clang can't properly compile Qt4.8.6 and earlier
with c++1z. Behavior in this commit mimics qmake
from Qt5 which also provides c++11 as a default
standard.
Task-number: QTCREATORBUG-16441
Change-Id: I3d29891d6e47f2367f2b3b2bf4be4d86661924e9
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@qt.io>
... and use this as a base for all RunConfigurations.
Clean out code in the individual run configurations dealing with their
enabled/disabled state.
Change-Id: Icc2ea136b056f7aea7ce96480b4402459d7ac0ce
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
