Drop some Utils:: and rely on some aspects' operator()()
Change-Id: I40d2c2973c1c9eff443bb74b8da44e0824d8d5c6
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The !isEmpty check is actually redundant, but currently cheaper than the
diversion through FilePath::fileAccess().
Change-Id: I44e6ec128c78cccf57c7276da70577a87b8c2f96
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Generally, aspects should use fromMap/toMap, but some older pages
use {from,to}Settings with always the same ICore::settings().
To make that less intrusive on the user code side, make that globally
implicit.
Task-number: QTCREATORBUG-29167
Change-Id: I29a8e23a31eb8061bb143e93931a07c6741eb7f9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Inserting the name for the "commit" operation into messages relies on a
certain sentence structure and doesn't work with translations. Same for
"optional" error messages. Use different complete messages for the
different cases instead.
Avoid explicit line endings, use automatic word wrap instead.
Add some quotes and full stops.
Fix message with plural.
Don't use %n for constant number (inline in message with assert).
Improve confusing tool tip for instant blame.
Change-Id: Ic8453763279753ebd5898858951acddcf311e6e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
To reduce the amount of duplicated strings for translators to handle.
The problem is not very prominent in vcsbase, but that's where we
are moving everywhere else.
Change-Id: Icb11fad3bccfea8a1408420e729566a75adccb66
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
* Replace message box with an error on the output pane.
* Separate logic for accept and close.
Change-Id: Ib9fa201a1a67ee195086f7a22bc6678a9642452a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
... or nothing, if the process object is destroyed immediately.
Change-Id: I6a1e1928bc49fc20a1c0e0ee9b8f4f723276bbca
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Introduce EventLoopMode enum and pass it to the
QtcProcess::runBlocking() instead. There is no need to
store this setting. By default this value is NoEventLoop.
Change-Id: Icad98b77bec5280b79039b7e5aa4ec408261521c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Adapt all callers' code so that it passes the FilePath
instead of QString. As a consequence introduce
TemporaryDirectory::masterDirectoryFilePath() and use
it where easily possible.
Change-Id: I14564949b3b916921e32a2957c84c03d1da43af2
Reviewed-by: hjk <hjk@qt.io>
In favor of the FilePath/Link ones.
Change-Id: I5caf9e0f8de304ff4ee12329557aa50a6f3a0c69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Schulz <david.schulz@qt.io>
Amends 3edc5673b5.
Turns out quite a few potential uses have other parents than
ICore::dialogParent().
Use a nullptr parent to mean ICore::dialogParent() to keep the
caller side simple.
Change-Id: Icfe1daafd710ae273d286679e0c8e2a3a27da552
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Similar to QT_RESTRICTED_CAST_FROM_ASCII to avoid the need for
decorations in user code.
At the same time, drop some convenience constructors and functions
in CommandLine and Icon essentially serving the same purpose.
Change-Id: Ida4e5ac19c2da0a4298a97b2a8e1511d56bbb79d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This patch needs to be applied together with the parent change.
There are 3 basic cases:
1. The user doesn't write anything to the write channel:
You don't need to call closeWriteChannel manually anymore.
By default the QtcProcess you create is in ProcessMode::Reader mode.
Internally it opens the process in ReadOnly mode and
closes the write channel just after starting.
2. The user writes some initial data (after being started)
and then closes the write channel:
All what is needed now it to set the write data
(QtcProcess::setWriteData) before calling start.
You also use the default ProcessMode::Reader mode.
Internally it opens the process in ReadWrite mode
and writes the writeData asynchonously when the process
already started. After writing the data it closes the
write channel automatically.
3. The user writes the data also after calling start.
All you need now is to create a process with
ProcessMode::Writer mode. In this mode the write
channel is not closed.
Internally it opens the process in ReadWrite mode
as some writers also read the data from the process.
All the code base is adapted here to the above rules.
Change-Id: Id103019d1d71a3012fd1eade226fe96b9aaa48c2
Reviewed-by: hjk <hjk@qt.io>
To make clear that this is not just any finish.
Also change FinishedError to FinishedWithError, to create
symmetry.
Also adapt enum member description to reality.
Change-Id: I13e05391eb86fdb24e2ae660f14dfddb282e1104
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Make functionality dependent on an (intentionally ugly)
setProcessUserEventWhileRunning call.
Also, back-paddle a bit on API combination of QtcProcess and
SynchronousPrceoss for now and prevent the QtcProcess-and-
runBlocking and SynchronousProcess-and-start combinations.
Goal is still to have all in QtcProcess in the end, but this
may take a while.
Change-Id: Ic146ec5db0ab8dc9613e5b2af5f4dc90bc7465ca
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Makes run() more similar to what start() looks like.
Also add some asserts to make sure run() and related functions are
only called on SyncronousProcesses, as these are currently the only
ones where this works.
Change-Id: Idee6076c3f40a484db5c17f5bb348698cc83d220
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The result is fully stored in the object anyway. Using the extra
SynchronousProcessResponse structure only causes copies of
the data and complicates access on the user side in
a lot of cases.
The result bits are now also accessible individually.
There's obvious room for follow-up changes on the topic, e.g.
ShellCommand::runCommand's parameter list could shrink to
just a SynchronousProcess parameter.
Change-Id: I45aa7eb23832340be06905929280c012e1217263
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
