Using this command without prefix and with the 0n decimal prefix
resulted in unreliable frame selection. Last chance is the hexadecimal
prefix.
Change-Id: I935d88849eb541534d4f311ac6059bcd35aee62c
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Most users expect build related entries in the Issues pane, so prepend
debugger related exception entries with a prefix making clear that these
entries are not build related.
Task-number: QTCREATORBUG-17806
Change-Id: I8a78c1eff3a4386f108997954329b694c223400f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This reverts commit ab1b631d76.
I'm currently not sure when to use which prefix and the documentation
isn't clear about that either. Currently reverting this change until it
is known what prefix we have to use here.
Change-Id: I906dcffa1b35e462bb6ed9713405d00d342c8a39
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
If the list of partial expressions is empty we need to tell the watch
handler that we are only updating the locals view, not e.g. the
inspector view.
Change-Id: Iedc74ffc66a8435faa272d053849b831f6b8cbbe
Task-number: QTCREATORBUG-16692
Reviewed-by: David Schulz <david.schulz@qt.io>
Reviewed-by: hjk <hjk@qt.io>
For easier copy pasting comands from the log.
Change-Id: I60e2737540d403454cd36f42e7b1ac3cf203df07
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This overload of error is deprecated in 5.6.
Replace with errorOccurred, which was introduced in 5.6.
Change-Id: Iccfba7e7103b7ce377471696f1f2ec217e52c840
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
One step further to separate the debugger environment from the
inferior environment and to make it possible to configure a
working directory. Guessing one from the inferior's working
directory is not always a good idea.
Change-Id: I33d139c0f228ec0870556b82bc6aecca0a8e62d6
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Always report back when content for the memory view is requested.
Task-number: QTCREATORBUG-16555
Change-Id: Idc6202a392899c5d524c696ac7342c4ea4487b1e
Reviewed-by: hjk <hjk@qt.io>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It may cause hick ups when debugging an application that has pdb files
larger than 1 GB.
Change-Id: I596d8f39396f39164f4b59df8ac0b06fbf2ad358
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This is low hanging fruit enabling a lot more customization.
Change-Id: I1a90fa731ea512852c12a55fad75551efb44e875
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
In newer cdb versions the default symbol path points to the microsoft
symbol server. This can lead to a very long start up time for inferiors
including many modules, because every module is verified against that
symbol server. Unless the user does not explicitly set such a symbol
server in the cdb settings do not use a symbol server.
Change-Id: I0b24e2dd12f6cef98c55f4f57f0c800cecfc3c3f
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Saves an asking for debugger log roundtrip when the information is just
visible in the verbose log. Was just used inside the cdbengine.
Change-Id: I9801d3ccd8f273c3b4afcf053b00e7af0953a63f
Reviewed-by: hjk <hjk@theqtcompany.com>
On the user-visible side, only the 'Analyze' mode button disappears,
and instead a combobox to switch between different tools in appears
in the Debug mode toolbar.
Internally, that's quite some re-organzition: The centralized
'Analyze mode is busy' flag is gone, allowing us to run e.g.
ClangStaticAnalyzer and MemCheck in parallel.
Analyzer tools and debugger now share the same mechanism to
generate/load/save dock widgets.
Analyzer tools now create and handle their own start/stop button
when appropriate. In general, Analyzer tools can create/handle more
than one run control at a time.
Further consolidation is possible, e.g. RunControl state handling
could be merged into the base ProjectExplorer::RunControl to
avoid the still existing duplication in ~15 instances.
Change-Id: I91e5940ebc4211f98056d507cf2f7b5f8efe7f07
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This is a mechanical replacement for the former executable, processArgs,
inferiorEnvironment and workingDirectory members.
Change-Id: I4160e01427ed801df9b729f1f31d0a2ca48159b5
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Debugger and stub run locally, the debugged process not necessarily.
Change-Id: Ibf6aec3dcaec60069866ec0765ec2178ca0a26d6
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... for transport of memory contents in CDB machinery.
Change-Id: Id29aa2a3008ec7e4fc9494ca9e26c4057f895663
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
- Remove old experimental native mixed approach.
- Move some common stack parsing to Stackhandler.
- Mark gdbbridge.py debug output explicitly to remove it
from actual reponse handling
New native mixed needs QtDeclarative changes and
QTC_DEBUGGER_NATIVE_MIXED=1 for now.
Change-Id: I09eed1da51cea878636d36756015b7bfaed34203
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Since Qt 5.3, there's a QProcess::processId() providing direct access.
Change-Id: Ia9c143c7a92ec61d1aa36ff3f4670ba72a509634
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
The V4 debug service expects correct JSON as input and gdb, lldb, and
pdb expect Python object literals. There is a subset of JSON that is
also valid as Python object literals and we use that for the protocol
spoken with gdb, lldb, and pdb. The strings passed to CDB are tunneled
through JSON strings and converted to byte arrays before sending them.
Change-Id: I87319b5450e5c3c3b29c565b75cddaa612767611
Task-number: QTCREATORBUG-14931
Reviewed-by: hjk <hjk@theqtcompany.com>
