Default to false, remove all no-op reimplementations.
And rename the getter to isImmutable according to the rules.
Change-Id: I8cce79d88fb59badfa1cffcf30a46f7ff3b09e8b
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Both wrap the corresponding Qt class, but make sure all temporary files
or directories are created inside a "master temporary directory".
Change-Id: I55461be507c828c965224c02863ea5ed9bbf9498
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
The old ones did not convey their meaning very well. In particular,
NormalOutput and MessageOutput were easily confused.
Change-Id: Ia0a8c1b1c366ab3f5c59f751b37b8b1f68f6831d
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Remove the finished() signal that is (sometimes) used to report that
a buildstep is done and use the FutureInterface for that purpose
consistently.
Change-Id: Ibe5520b562b91f1a7f4fc73ee898b33b930029ec
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
The device settings were moved from the Organizer window to its own
Devices window quite a while ago.
Change-Id: Ia3cdc7686ef70bde0e6c443dc2d72b64f54fdbf3
Reviewed-by: Vikas Pachdha <vikas.pachdha@theqtcompany.com>
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
This information can be used to get information from earlier steps,
which e.g. queried for android devices to deploy to.
Change-Id: Iefe1c9443915cb6211f86f98ff7aaf3cb75145ba
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Mostly done using the following ruby script:
Dir.glob('**/*.cpp').each { |file|
next if file =~ %r{src/shared/qbs|/qmljs/}
s = File.read(file)
s.scan(/^using namespace (.*);$/) {
ns = $1
t = s.gsub(/^(.*)\b#{ns}::((?!Const)[A-Z])/) { |m|
before = $1
char = $2
if before =~ /"|\/\/|\\|using|SIGNAL|SLOT|Q_/
m
else
before + char
end
}
if t != s
puts file
File.open(file, 'w').write(t)
end
}
}
Change-Id: I8ef73f4861069dcd7edf5e73b397d60609d4b476
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
The run configuration did try to set the simulator type for devices, and
also before knowing the available simulators.
Make most IosDeviceType initialisations explicit about the device type.
Change-Id: I22b87bf4568e1af0c12b1fb91d3074bf29438db2
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
get simulator type and SDK version dynamically from the available ones,
and let the user choose which one to use.
This fixes the static solution that did break with Xcode 6
Change-Id: I5cb2be68b9ea8736fc880cf3dd9d39d77f030293
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
This can use the faster route through QFileInfo::exist now.
Change-Id: Idb41b5d5185d7f02eacba498fb01f483d95e8d57
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@digia.com>
still uses the default deploystepconfiguration, which gives some
artifacts (to be fixed later)
Change-Id: I3f4f8a71fbe4e18fc171aee571da72da1c9735db
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
avoid accessing target and runconfig in the run
method
Change-Id: I2d48ade1313d80e8041ea90f59f53f93858ab6b3
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
iosdeploystep did call reportFinished on the future interface.
This is incorrect, the finished signal should be emitted instead
This lead to a reuse of the future due to missing call to
buildStepFinishedAsync which lead to failing on the second run of
the deploy step.
Change-Id: I96b8874bc98c77453d5c0af96c818dff6e955167
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
first work in progress support for ios
* separate iosTool using xml communication used for device info and run
* iossim tool to handle the simulator
* debug prepared but not working
* separate gcc toolchain detection fix for simulator
1) add a QT built for ios
2) open a project, for example qtbase/examples/widgets/animation/animatedtiles/animatedtiles.pro
3) build/run...
Change-Id: I7e01604e416338cbe4692dfb34f5d3f31312702d
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
