The Android deployment file for CMake project was constructed based
on the main project target and thus was always expecting the file
to be under the build folder root path. This makes sure the correct
path to the output path is retrieved.
This practically different problems with running examples when the
main project is a Qt module, for both qmake and cmake.
Fixes: QTCREATORBUG-25793
Change-Id: I5fdedd94c7c4c84c351c28476ca14b0f95f99f22
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Qt 6.0 + CMake: The name for the Android deployment settings file needs
to be determined by using the build key of the current run configuration
rather than by using the display name of the project root node.
Since in contrast to qmake/Qbs, CMake does not supply us with the file
name and we have to contruct it ourselves. Therefore, it makes sense to
move the value into the Android plugin.
This change adds AndroidQtVersion::androidDeploymentSettings which lets
qmake and Qbs still provide the value as before while handling the CMake
fallback.
Fixes: QTCREATORBUG-25209
Change-Id: I12314d06a45d6e045cb654d9140f9d2ed4602f67
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This is apparently the right thing to do anyway and also helps to
select the right emulator or device when multiple ones are connected.
In that situation otherwise an error
"Expected a single connected device, got instead 2 -
try setting 'ANDROID_SERIAL'"
would occur.
Change-Id: I650a221d1a321d4dd9035411f85c7a68244c20e2
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
There's LLDB coming into play, and debugServer is what we use on
BareMetal and RemoteLinux, too.
Change-Id: I77f8545ebbe6685708215ac579789f7d4990b7be
Task-number: QTCREATORBUG-23260
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Including some random uses.
This mimics std::filesystem::operator/(std::filesystem::path).
Change-Id: I0b0f5cf0d962fd33d4cbb9be96645a0b4a21ee03
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Do not crash when Qt version is nullptr. This was checked for in
some places, but not in others. Not sure whether or not it is safe
to assume that Qt version is never a nullptr here, so I went for
the better-safe-than-sorry option.
Change-Id: Ief9a479ee5719204582902bfa72412145658f0c2
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Based on change 286266, we can find a correct NDK version for Qt for
Andriod version. This change allows Android plugin to get relevant NDK
information and registers appropriate toolchains and kits settings.
[ChangeLog][Android] Automatically use correct NDK version
corresponding to used Qt version.
Task-number: QTCREATORBUG-23583
Change-Id: Ic6b0d7a1ae8962c075b77498de88e018a008ac3e
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
We need to choose the preferred ABI based on what it's in the package
not based on what Qt supports.
Change-Id: I243fbf67913af7804af868d507323c0934ad3752
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
... on runcontrol creation to prevent later access. Adapt some users.
There are more to come.
Change-Id: I2a3fe5eea0ada4eff7d08b79a6f49694e6962c8a
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Also add QT_INSTALL_IMPORTS, which is used in a so-called "copy" of
the code in the QtApplicationManager plugin. More is better in this
case.
Change-Id: Ie705d95a24664d3627875ee0463e83a13b830260
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Now we can use QtCreator to build, deploy, run & debug QBS projects.
[ChangeLog][Android][QBS] Add Android support for QBS projects.
Fixes: QTCREATORBUG-15573
Fixes: QTCREATORBUG-19880
Fixes: QTCREATORBUG-22182
Change-Id: I08b153a44dcf7ca178689c1c30fa2201c4cc0dbb
Reviewed-by: hjk <hjk@qt.io>
For a long time, probably from the very beginning, a RunControl
was meant to hold (a copy of) data needed for its operation, that was
valid at the time of its construction, to be resilient in cases
where RunConfiguration setting were changed while the RunControl
was running, or to properly re-run with the original settings.
Unfortunately, the task was repetitive, as RunConfiguration
classes had no generic access to properties / "aspects"
and there was was the runConfiguration() accessor (probably
for mostly unrelated reasons in the output pane handling) which
made the idea of just casting that to the original runConfiguration
and access the data directly there appealing, with all the
expected consequences.
This patch here partially addresses the issue by copying some
more of the related data at RunControl construction time and
adjust the using code, avoiding most uses of the runConfiguration()
accessor in a mostly mechanical matter.
Complete removal appears possible, but will be less mechanical
in "difficult" plugins like ios, so this is left for later.
The new accessors in RunControl are very much ad-hoc, leaving
room for improvement, e.g. by consolidating the access to the
run config settings aspects with the other runconfig aspects
or similar. For now the goal is to remove the runConfiguration()
accessor, and to as much as possible fixed data after RunControl
setup is finished.
Next step would be to officially allow construction of RunControls
without a specific RunConfiguration by setting the necessary
data independently, removing the need for the various workarounds
that are currently used for the purpose of faking (parts of) the
effect of the non-existing RunConfiguration or refusing to operate
at all, even if it would be possible.
Change-Id: If8e5596da8422c70e90f97270389adbe6d0b46f2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
One instance had (base) qt version already at hand, the other was
inside AndroidQtVersion itself.
Also remove the typo in the function name.
Change-Id: I8fb0a1cd11751e4dea1f29a99603ea6b0112c49e
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
The remaining dependency is hacked into QmakeProjectManager
by using a compile time-only dependency on androidconstants.h.
Change-Id: Id78125137bc75c145a072bc753276abbf0029647
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
... from ProjectNode::targetData and setTargetData, and rename them
to data and setData.
It was only used in the implementation to retrieve the right node,
instead move the responsibility to find the right node to the caller.
Current assumption is that the functions were always called on
the right node already.
Change-Id: I9ae7e8a7ed5c79b924b99fd9a6a652bad56d114a
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This uses the same approach as in the previous patches: Have some
generic interface in the base classes (here ProjectNode::targetData()
setTargetData()) and implement on the qmake project side.
Implementation for Cmake/QBS is architecture-wise possible, but
not used right now, and left for later.
Change-Id: I3bbf66170020cf9027a894cd66db15ec7ffbf499
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Instead, set the default level of all logs to QtWarningMsg.
The call to setFilterRules overrides the user preferences in qtlogging.ini.
Change-Id: Id5f6cd550d14ff7f45ae04c5d3110e0bafb0f072
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: hjk <hjk@qt.io>
It has been an obsolete alias for setId for a while and downstream
uses have been adapted.
Change-Id: I467370aa67054599c7771e8275d28e62ddc461fa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This makes it more similar to the classic QAbstractItemModel::{data/setData}
pattern and hides qmake-specific semantic (variables are QString*Lists*)
behind something more general.
Change-Id: I82d7006affd4af208be2b7640076698d13fd3a61
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
IPv6 enabled systems can have IPv4 and an IPv6 entry for localhost
and macos seems to prefer IPv6 for localhost and IPv6 is not
supported by adbd
Task-number: QTCREATORBUG-20730
Change-Id: Ia0823fa04581afc6297e5e8d57a8034ba1b5749c
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The Qt/Android runtime does support passing parameters to the
application. We have to pass '-e extraappparams <base64 string>' and
'-e extraenvvars <base64 strings, concatenated by ";">'. This is very
handy and should actually be exposed in the GUI.
Change-Id: I8c84a53ab8f6f07ea5b6e01c902f53385df8b35f
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
We check that qmake property in many different places.
Change-Id: Ifd5efe4ad2831385493bd3afe8538929578e8fb4
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The users (typically target specific DebuggerRunTool derived classes)
are meant to use the individual setter functions nowadays, not the set
up the full structure, so the members are a true implementation
detail now.
Change-Id: Ida04801e3230a2fe8bbadde8845e58c3077c87a5
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Host and port reasonably belong together, using a QUrl makes that more
explicit and follows the lead of the Qml profiler in that area.
Change-Id: I754cb17d165ce6b2f25c655eeebfd8ac8f5a93c7
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Specify the qml server address and use correct default loop back
address in qmlengine
Change-Id: I9b77cb3385041bbe79900e7f7a188ca26124bacc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
