Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
It's better when the user code has to be explicit in what
format and/or which parts of the FilePath is needed.
Change-Id: I9d70e073f853a1bbc47c8482ebe77d7c4612b4b7
Reviewed-by: Marcus Tillmanns <marcus.tillmanns@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
1. The `std::hexfloat` representation produced by `std::sstream`.
2. Breaking the number into a normalized value and a integral power of 2,
as does the `std::frexp()` function.
M_PI looks like "0x1.921fb54442d18p+1" and "0.785398163397 * 2^2"
respectively.
Fixes: QTCREATORBUG-26793
Change-Id: Ib08ea9408f79201434eb75ec328b94ab933259a4
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Currently only the previous from/to pair, but can be extended
by codec state.
Task-number: QTCREATORBUG-24462
Change-Id: I3d101e74d1fef65bb75ddaab1dc2eaf77201dcde
Reviewed-by: David Schulz <david.schulz@qt.io>
This is a step towards properly supporting multiple debugger
sessions side-by-side.
The combined C++-and-QML engine has been removed, instead a
combined setup creates now two individual engines, under a single
DebuggerRunTool but mostly independent with no combined state
machine. This requires a few more clicks in some cases, but
makes it easier to direct e.g. interrupt requests to the
interesting engine.
Care has been taken to not change the UX of the single debugger
session use case if possible. The fat debug button operates
as-before in that case, i.e. switches to Interrupt if the
single active runconfiguration runs in the debugger etc.
Most views are made per-engine, running an engine creates
a new Perspective, which is destroyed when the run control dies.
The snapshot view remains global and becomes primary source
of information on a "current engine" that receives all menu
and otherwise global input.
There is a new global "Breakpoint Preset" view containing
all "static" breakpoint data. When an engine starts up it
"claims" breakpoint it believes it can handle, but operates
on a copy of the static data. The markers of the static
version are suppressed as long as an engine controls a
breakpoint (that inclusive all resolved locations), but are
re-instatet once the engine quits.
The old Breakpoint class that already contained this split
per-instance was split into a new Breakpoint and a
GlobalBreakpoint class, with a per-engine model for Breakpoints,
and a singleton model containing GlobalBreakpoints.
There is a new CppDebuggerEngine intermediate level serving as
base for C++ (or, rather, "compiled") binary debugging, i.e.
{Gdb,Lldb,Cdb}Engine, taking over bits of the current DebuggerEngine
base that are not applicable to non-binary debuggers.
Change-Id: I9994f4c188379b4aee0c4f379edd4759fbb0bd43
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: hjk <hjk@qt.io>
This was useful to trigger collective attemptBreakpointSync() in the gdb
engine when gdb did not yet track pending breakpoints by itself.
That's not needed anymore.
Change-Id: I8afd2955070504c6bd6ae6c028b3f006b6eb4d7c
Reviewed-by: David Schulz <david.schulz@qt.io>
This conceptually reverts part of a61b6dfc.
Task-number: QTCREATORBUG-17594
Change-Id: I9ff72a027838a20039f217ed0d669b6c45bc2acf
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
Also, remove the need to mark GDB Python commands, detect the
need to use MI on the presence of non-Pythonic letters in
the command (space and hyphen).
Plan is to reuse even more almost shared code between engines.
Change-Id: I4e00debb07f2482637930675a28f464666b59553
Reviewed-by: hjk <hjk@qt.io>
Needs to make namespace detection work without valid frame
Task-number: QTCREATORBUG-17326
Change-Id: Ia7c7017db4ef384d4f246e11a5601d01f4f366f1
Reviewed-by: hjk <hjk@qt.io>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Easier to coordinate between dumpers and watchhandler
Change-Id: Ide191a5786dc04ef22c3e9c8b0bec39f8f8c0f1d
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... into a string specifying a kind of encoding (utf8, latin1),
an optional bytesize (2-byte integers, 4-byte integers) and a
flag whether the displayed value should get "..." around it.
Scales better than adding an enum value for each new combination.
Change-Id: Iffcb1e2f148f12da96e165559a976bd34026c649
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
This makes sure we construct QJsonValues from bools, rather than
casting them to ints.
Change-Id: Ibc3e5322460e5bec153d80024219ba7935268d68
Task-number: QTCREATORBUG-15395
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
We have been way more generous in accepting input than what is specified
by the grammar since the beginning, and even GDB did (does?) not completely
stick to that format. So the comment is misleading at best.
Change-Id: Ieaf4fc2b9a6f01be649936f72e03866677d6cc5b
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
We are overstretching std::vector implementations in some
cases of partial self-assignment.
Task-number: QTCREATORBUG-15183
Change-Id: I144e9e34df117286a7eef6403e29054d530cacbe
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
- Remove old experimental native mixed approach.
- Move some common stack parsing to Stackhandler.
- Mark gdbbridge.py debug output explicitly to remove it
from actual reponse handling
New native mixed needs QtDeclarative changes and
QTC_DEBUGGER_NATIVE_MIXED=1 for now.
Change-Id: I09eed1da51cea878636d36756015b7bfaed34203
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Broke by 150af7af4c.
flags must be stored with the command.
Change-Id: If2bac648d7d4b2c341eb6398d92b05660f519114
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Since we don't keep a local queue anymore, the distinction is
no more needed. Also, this is close to the LLDB side now.
Also move remaining uses of DebuggerCommand::flags to
GdbEngine, since that's the only user.
Change-Id: I61ae0f4e5294e306ab0b202e80f27fb3e3f7a7d7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
The V4 debug service expects correct JSON as input and gdb, lldb, and
pdb expect Python object literals. There is a subset of JSON that is
also valid as Python object literals and we use that for the protocol
spoken with gdb, lldb, and pdb. The strings passed to CDB are tunneled
through JSON strings and converted to byte arrays before sending them.
Change-Id: I87319b5450e5c3c3b29c565b75cddaa612767611
Task-number: QTCREATORBUG-14931
Reviewed-by: hjk <hjk@theqtcompany.com>
- Move DisplayFormat from watchhandler.h to debuggerprotocol.h
- Add/update a few comments about the use of the protocol enums
- Make decodeData take a DebuggerEncoding instead of an int
Change-Id: I50bed70a5da2e94da46e894bf9136bc14c9a1b23
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... when passing data from the dumpers to the GUI. This reduces
the need to guess whether a value contains a translatable string.
Change-Id: I5e2210b8d028bd71f0087a2ba5c7c5b04331b882
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... instead of manually set up JSON. It's more concise, and paves the
way to use per-command callbacks as in the other engines.
Change-Id: Ib5cf9c9b882ec0ec87acd7c1ceb938d3ee60346b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This practically removes any functionality beyond plain plot display,
but does that at least reliably, cross-platform, without dependency
on 3rd party python packages.
Change-Id: Iaff2f78595394522f32264c642df20dd48b83f8b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
Change-Id: I91979c685bbbd84359f7f4e19911a21a408f5d23
Reviewed-by: hjk <hjk@theqtcompany.com>
For potential re-use in qtcreatorcdbextension.
Change-Id: Ia5742b61c71fcd04eeaa894ed62218151d528a53
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
