Pass on the request to run cmake on to the builddirreaders.
Task-number: QTCREATORBUG-19704
Change-Id: Iafeba61f46d6bb6783fc62d0504bb07dde2c4612
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The tealeafreader used to not ever use this signal and used
the isReady() method to short-circuit the whole mechanism.
Change-Id: I2f7caedeedf977c70a5d7807e3a92775757a6fef
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The internal build target key had changed again. Adapt and use
a more error proof pattern to be hopefully safe if it may
change again.
The wrong build target key led inside the AutoTest plugin to a
wrong comparison of build target of the project parts vs. the
build target of the run configuration which in turn ended up
in always deducing the run configuration for the test runner.
Change-Id: I32df578df85cc0206c2b8fdac00acc3a798f0d73
Reviewed-by: hjk <hjk@qt.io>
It was only used within cmake, in a role that is nowadays covered by
buildKey.
Change-Id: I4fd77c06a3bb8965db5235315cb017c7b548fbaa
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This is what the code according to the comment tried to do.
Change-Id: Id585660fedec2c4eacce556ef25caa8479206c5c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Use setter of base class, similar to setListInProject() before.
Change-Id: Id620f0084a5dec0410f29c80f8f6393a6bcd5050
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Also change method names from update...() to create...() and mark as
const. This communicates that the objects the methods are called on are
neither altered nor updated.
Change-Id: I29e84dc398ded3ffcbf90741227362c6b4be2bf9
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The return value is only used for an immediately following assert
that can never trigger.
Change-Id: I653a68292427dd5d6e2fb153ee361da1f0573737
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Do not report targets that contain headers only and have no
include directories/defines set up to the code model. Such targets
are used to tell creator about the projects header files as a
work-around to creator not reporting headers in cmake projects.
This work-around is of course not necessary anymore, but it is widely
used and breaks the heuristics in the code model. So do not inform
the code model about these parts of the project.
Task-number: QTCREATORBUG-21425
Change-Id: I387d9d9fb4ae7b54fa08ee9b23efb9ab1f179b9c
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@qt.io>
Do not crash when the cmake tool that was used to parse the project
gets removed.
Change-Id: Ieda3ae2025dbcfb1f90d9bd01c5f0ed960756c6a
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Remove FolderNode::addNestedNodes that take raw pointers now that the
last user is gone.
Change-Id: If2ca3864934d9239ac136e65c0b7dbcea7caf220
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The previously per-Project/RunConfiguration changing meanings of
BuildTargetInfo::buildTarget have by now been split
into separate values in BuildTargetInfo:
- buildKey a handle to one item in Target::applicationTargetList
- displayName a user-visible string in the run settings page
The buildKey was tweaked to coincide with the previous 'extraId',
i.e. the non-RunConfiguration-type part of the project configuration
id that (still) use id mangling.
This allows replacing the cases of locally stored seven different
versions of buildKey(-ish) data by one RunConfiguration::m_buildKey,
and do all remaining extraId handling in RC::{from,to}Map only,
i.e. remove the base ProjectConfiguration::extraId() virtual and
remove the "re-try fromMap with mangled id" hack entirely.
The id mangling is still used to temporarily maintain .user file
compatibility in some cases for now, but should be replaced by
storing the build key and the RunConfiguration type soon. Qbs
already changes in here to only use the uniqueProductName as
buildKey, without the previously added display name which is
stored as part of the ProjectConfiguration already.
It turns out that RunConfiguration::buildSystemTarget was intended
and used to retrieve an item from the Target::applicationTargetList
for some configurations, coinciding with what buildKey does always.
So use that insteand and drop RunConfiguration::buildSystemTarget.
There is clearly is further consolidation potential left.
handling of (default)displayNames is still a per-runconfiguration
mess and there is further consolidation potential left.
Change-Id: I448ed30f1b562fb91b970e328a42fa5f6fb2e43e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some cmake generators create a set of different configurations of the project
at the same time (e.g. Visual Studio related ones). These typically contain
the same set of files.
Creator iterates over the configurations and adds files to the project tree.
For multi-configuration generators this does lead to the same file being listed
several times below a target (the targets themselves were already deduplicated!).
This patch adds deduplication of file paths already listed in the target's
subtree of the project, thus fixing the multiple files issue. New files (e.g.
those that get only built in debug/release mode) will still get added as before.
Task-number: QTCREATORBUG-19020
Change-Id: I5dd6012ea335d9946c78c25be258c8c4d60698f2
Reviewed-by: hjk <hjk@qt.io>
Fix use of build directory vs. workdirectory in tealeafreader and servermode
reader.
Change-Id: I593579f7ad4facd64cf201368cacc4d3a8414fbf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This got broken when moving the BuildDirManager from the BuildConfiguration
into the Project itself.
As a side-effect this patch also fixes the persisting of cmake state.
Task-number: QTCREATORBUG-19075
Change-Id: I1fc696097b09f5285e67f20885eb1fa27504990b
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
This builds on top of 08677c0b01 and
fixes one more code path to go through a common entry/exit point.
Change-Id: I1d00fa9242f247028e5d3b0ef3b5fe1d3f4cb03d
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Let project managers store information whether a project part
belongs to an executable or a library and use this information
inside the AutoTest plugin.
This information will help to determine which targets are
relevant for the execution of tests.
Change-Id: I93b42797bf55225425398dc83aecea3c99eea290
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@qt.io>
The old code model expected the macros as C++ formatted text
("#define Foo 42) but newer targets like the Clang codemodel expect key
value arguments like "-DFoo=42". So instead of parsing the text again and
again we use an abstract data description.
Task-number: QTCREATORBUG-17915
Change-Id: I0179fd13c48a581e91ee79bba9d42d501c26f19f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Filter out CMake input files that are already listed elsewhere in the
project tree. This is server-mode only.
Change-Id: Ib62cd5b521a51180d12d76ec2868a99dbdecc272
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
The build dir might be contained in the source directory, but not
the other way around. So this should be more reliable.
Change-Id: I2459b249fcc1002aa7f7787231b5699444a4c6bd
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Base the selection of the run configuration on the executable
we have gotten already from the BuildTargetInfo and take
deployment information into account.
This also reverts cce1e130 partially and avoids
stuffing unrelated information into the buildsystemtarget.
Change-Id: I3de6e910a5fd1092d428ec4afc33c4ca62daaa25
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Add unit test to make sure this stays fixed.
Task-number: QTCREATORBUG-18624
Change-Id: Ieeb41982418481223d9ebf8f5c6ec4b3b78bfe00
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Use the information to add a filenode below a target that takes
you directly to the target definition.
Change-Id: Ifcb8e2c4f085110033019ea3816c79f5b8630472
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
This triggers the logic in Project to show the top level project
file in the project tree.
Remove similar logic in CMake.
Change-Id: I2bfdd3f5e3d4126910a3feb480cec5ef689954ed
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Florian Apolloner <florian@apolloner.eu>
Handle more kinds of errors in CMake server-mode.
Task-number: QTCREATORBUG-18318
Change-Id: I43fff7f3cfbd86d01ff05a0936261b8d91aa5d70
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
