Introduce priorities for build configuration factories. This way
plugins can register specialized build configuration factories, that
e.g. can provide additional build steps.
A negative priority signifies that a factory is not prepared to
handle a request, the default build configuration factory shipped by
the build system plugin will report a priority of 0. Add 100 to that
for each specialization you add (e.g. a remote linux buildconfiguration
factory would report 100, a specialization of that for mer will
should report 200, etc.).
Change-Id: I141a7a5a79166afdb7657d46eb7e86bd18d3abf6
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Michal Klocek <michal.klocek@digia.com>
Generalize the target setup page and move it into projectexplorer
Move the qmake specific code into a projectimporter class with
a specialization for qmake projects in the qt4projectmanager.
This change depends heavily on the BuildConfigurationFactory cleanups
done earlier and completes that change in such a way that generic
build configuration factories are now in theory possible. The
remaining problem is how to select the best factory of several that
claim to be able to handle a kit and that is left for the next patch.
Change-Id: I47134cb1938c52adebcdc1ddfe8dbf26abbbbeee
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Refactor the code of the build configuration factories. The idea is to
generalize the code so much that we can allow plugins to install
custom build configuration factories for the platforms they support.
To support this use case the following changes where done here:
* BuildInfo class was introduced to describe one build configuration that
can be created by a factory.
* Factories report a list of BuildInfo to describe what they can produce.
This fixes the need for factories to implicitly create one buildconfiguration
and then create another one 'officially' to support debug and release build
configurations to be set up for projects.
* Do no longer work around factories to create build configurations.
Change-Id: Ic372e4a9b5c582633b467d130538948472b89d91
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Use setBuildDirectory() in the different BuildConfigurations instead
of reimplementing that over and over again.
Change-Id: Ic355fdb4624c71667ce470b3e2865c9a8722ef09
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Use it instead of retrieving this information from the document.
Change-Id: I809fcb2daf59021cf503c371a5d40d75d7448796
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
That is what it actually is, wrt how Qt API calls it.
Change-Id: Ied02055debf6aad75556b0d9d22e8ba2f72be555
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
#!/usr/bin/env ruby
Dir.glob('**/*.cpp') { |file|
# skip ast (excluding paste, astpath, and canv'ast'imer)
next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
s = File.read(file)
next if s.include?('qlalr')
orig = s.dup
s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
res = $&
if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
res
else
res.gsub!('} else', 'else')
res.gsub!(/\n +} *\n/m, "\n")
res.gsub(/ *{$/, '')
end
}
s.gsub!(/ *$/, '')
File.open(file, 'wb').write(s) if s != orig
}
Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>
Which simply returns a BuildEnvironmentWidget. A long time ago
BuildConfigurations had no environment, nowdays they do. So it makes
sense for all BuildConfigurations to have the BuildEnvironmentWidget.
Change-Id: I824c45df79a0dcd2b624bf67a4730fb5dab098bc
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Which asks each KitInformation for their parser, thus currently creating
a toolchain + qt chain if that is applicable. Remove all code that does
that by hand from various buildsteps/buildconfigurations.
Change-Id: I79a07ffd1dbe9a43bdbc838bc0098071aa412009
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Not just qt4 and cmake but also generic projects.
Change-Id: I4a7e86fb2dbf6c6e32b4da78953ad3199c554470
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
On initial run we offer the user a choice between all the kits, which
are compatible with the cached generator. After the initial run, the
user can't change kits nor generators anymore.
Except if the builds into a new directory or adds a buildconfiguration,
then the user can choose between generators but not kits.
Task-number: QTCREATORBUG-7940
Task-number: QTCREATORBUG-7928
Change-Id: I9b663435cd2e021f7fe08379c1c487a6aebe8976
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
The cmake wizard proposes also ninja if ninja support is available
Ninja must be in PATH, but it is only called once, so it doesn't hurt.
Task-number: QTCREATORBUG-7720
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Change-Id: If3c9c7ae55e6990fa16b031fc2998a8d8d9ed17a
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
* Rename profiles to kits.
* Update some strings:
* projects mode has a Kits tab, not a Targets tab.
* " Settings" was dropped from the sub-tabs of the Kits tab
* menu entry "Build/Open Build/Run Target Selector" was renamed
to "Build/Open Build and Run Kits Selector".
* Use "Kit" instead of "Target" in miniprojecttargetselector.
(The class was not renamed as it does indeed select targets,
not kits)
Change-Id: I0727e086e2dfa0e8aaaf89fdc6f2e3596c7a4314
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
CMakeBuildConfigurations can only exist on CMakeProjects
Change-Id: I8501e39f133fea854b953f9739e001cae1f2c0ea
Reviewed-by: Tobias Hunger <tobias.hunger@nokia.com>
Introduce Profiles to store sets of values that describe a system/device.
These profiles are held by a target, getting rid of much of the information
stored in the Build-/Run-/DeployConfigurations, greatly simplifying those.
This is a squash of the wip/profile branch which has been on gerrit for a
while, rebased to current master.
Change-Id: I25956c8dd4d1962b2134bfaa8a8076ae3909460f
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Use Core::Id for all the project related objects in favor of plain
QStrings.
Change-Id: I790ab40cb29899efdb49c413a77609486f52e683
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Getting the #include directives ready for Qt5. This includes the
new-project wizards.
Change-Id: Ia9261f1e8faec06b9285b694d2b7e9a095978d2b
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
Refactor ToolChains in Qt Creator:
* Allow for several toolchains of the same type
* Be smarter wrt. guessing what kind of output a toolchain
produces. This allows us to eventually handle e.g. embedded
linux setups way better than before.
* Be smarter wrt. guessing what kind of environment a Qt version
needs.
* Improve auto-detection of toolchains a bit
* Decide on which debugger to use based on the kind of output
produced by the compiler.
* Add options page to configure toolchains
* Remove toolchain related options from the Qt version dialog
Reviewed-by: dt
do not inject SOURCEDIR and BUILDDIR into the environment of
build steps and run configurations any more.
instead, all custom executable paths, argument lists and working
directories now support the %{sourceDir} and %{buildDir} macros.
this approach is more elegant and more scalable.
get away from argument stringlists. instead, use native shell command
lines which support quoting/splitting, environment variable expansion
and redirections with well-understood semantics.
Task-number: QTCREATORBUG-542
Task-number: QTCREATORBUG-1564
