Use the display name from the factory as default, override if needed.
Change-Id: I03519c998432fea4120b0de8b2fc2686644635f2
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
1. Systematically check for AbstractProcessStep::init() first in
derived classes.
2. Use setupProcessParameters(processParameters()); by default in
the base implementation.
3. Drop all re-implementations that are effectively the same.
Change-Id: I0ae54dd4909b354672a63ee56d0b7c2ea0732494
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For convenience, and use it in some places.
Change-Id: I8f7cb502b37b2fbf4cf2d17cac9c6299558332dc
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Step towards aspectification. The new position of the method
implementation are intentional to keep the follow-up patch small.
Change-Id: I89c6982c8380c2a6b0e2bc50fb10f48d5413fc51
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The coreplugin/id.h header is kept for downstream for now.
Change-Id: I8c44590f7b988b3770ecdc177c40783e12353e66
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Deprecated, and declared to have no effect for Qt >= 5.12.
Task-number: QTCREATORBUG-24098
Change-Id: I11067b8e2ae40ff1f1dd4de92a734a40d2eae556
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Now only one piece of code needs to be written to both linkify output in
an output pane and create tasks for it in the issues pane.
The calling sites are also simplified. For instance, until now, build
steps had to feed their output parsers manually and then push the
created tasks up the signal stack in parallel with the actual output,
which the build manager relied upon for cross-linking the output pane
content. Afterwards, the output would get forwarded to the formatter
(and parsed for ANSI escape codes a second time). In contrast, a build
step now just forwards the process output, and task parsing as well as
output formatting is done centrally further up the stack.
Concrete user-visible improvements so far:
- File paths in compiler/linker messages are clickable links now.
- QtTest applications now create clickable links also when run
as part of a build step, not just in the app output pane.
Task-number: QTCREATORBUG-22665
Change-Id: Ic9fb95b2d97f2520ab3ec653315e9219466ec08d
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Use "flat" aggregation instead.
This is another step towards the formatter/parser merger.
Along the way, also fix some some subclasses (mostly in BareMetal) that
erroneously forwarded handled output to other parsers.
Task-number: QTCREATORBUG-22665
Change-Id: I12947349ca663d2e6bbfc99efd069d69e2b54969
Reviewed-by: hjk <hjk@qt.io>
All parsers can now have search directories, not just the GnuMakeParser.
This allows us to get rid of the "task mangling", removing another
instance where the order of parsers in the chain mattered.
Task-number: QTCREATORBUG-22665
Change-Id: Id0d55522ae6800afd9f50ff36546224b0d8bb382
Reviewed-by: hjk <hjk@qt.io>
... and use in ProcessStep and related classes.
Change-Id: Ie6f1403d0aa2b9f5bcde06e994809466700b1357
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For Compile, BuildSystem and Deployment. Unclutters user code and reduces
binary size.
Change-Id: Ia18e917bb411754162e9f4ec6056d752a020bb50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Allows to use constants in fewer places, similar to what e.g.
RunConfiguration does.
Change-Id: I9d049128206c4acf0ce14b06b66d6c090a7c5242
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... or Target.
This patch moves build system from conceptually "one per project"
to "one per target (i.e. per project-and-kit)" or "per
BuildConfigurations" for targets where the builds differ
significantly.
Building requires usually items from the kit (Qt version, compiler,
...) so a target-agnostic build is practically almost always wrong.
Moving the build system to the target also has the potential
to solve issues caused by switching targets while parsing, that
used Project::activeTarget() regularly, with potentially different
results before and after the switch.
This patch might create performance/size regressions when several
targets are set up per project as the build system implementation's
internal data are duplicated in this case.
The idea is to fix that by sharing per-project pieces again in
the project implementation once these problems occur.
Change-Id: I87f640ce418b93175b5029124eaa55f3b8721dca
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... over setting command and args individually.
Change-Id: Iec7c8d3a0b05fb8fa0639f7ddbe7ccdc7387d2a2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For the command and the working directory.
Change-Id: Ia69dc7100aeb57bb6e1b35f4dd4f3cf3763d8cda
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
The extra parameter was always computed but used only in one place,
and that use got removed lately.
Change-Id: Ie10c0107ca70ee97ce03f83294992aab8d1a3ffe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
De-QObject-ify class, tr contexts are now the product's
context, which was the case in some BuildStepFactories already,
and is current state in {Run,DeployConfiguration}Factory.
One spurious object name removed.
De-virtualize canHandle(), it was never overloaded and is not
intended to be overloaded anymore.
Remove unused clone() function.
Change-Id: Iff7fba5f707505f868f94458084a18650535fa23
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
There's several hundred kBytes extra for the separate .o in a
debug build, this doesn't scale well for a handful lines of code.
As the Nim plugin is a nice template for others elsewise, it would
be nice to use scalable patterns only.
Change-Id: I78e473d28a6a63d458dcbe06a77d93221867417f
Reviewed-by: Filippo Cucchetto <filippocucchetto@gmail.com>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Create a Nim Application using the wizard, remove main.nim, open.
Without this patch creator crashes.
Change-Id: Ia1628c67525e2fe9bb8dd9c76f62d7074844ccc4
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
