Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
* Replace message box with an error on the output pane.
* Separate logic for accept and close.
Change-Id: Ib9fa201a1a67ee195086f7a22bc6678a9642452a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
... or nothing, if the process object is destroyed immediately.
Change-Id: I6a1e1928bc49fc20a1c0e0ee9b8f4f723276bbca
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Introduce EventLoopMode enum and pass it to the
QtcProcess::runBlocking() instead. There is no need to
store this setting. By default this value is NoEventLoop.
Change-Id: Icad98b77bec5280b79039b7e5aa4ec408261521c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Adapt all callers' code so that it passes the FilePath
instead of QString. As a consequence introduce
TemporaryDirectory::masterDirectoryFilePath() and use
it where easily possible.
Change-Id: I14564949b3b916921e32a2957c84c03d1da43af2
Reviewed-by: hjk <hjk@qt.io>
In favor of the FilePath/Link ones.
Change-Id: I5caf9e0f8de304ff4ee12329557aa50a6f3a0c69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Schulz <david.schulz@qt.io>
Amends 3edc5673b5.
Turns out quite a few potential uses have other parents than
ICore::dialogParent().
Use a nullptr parent to mean ICore::dialogParent() to keep the
caller side simple.
Change-Id: Icfe1daafd710ae273d286679e0c8e2a3a27da552
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Similar to QT_RESTRICTED_CAST_FROM_ASCII to avoid the need for
decorations in user code.
At the same time, drop some convenience constructors and functions
in CommandLine and Icon essentially serving the same purpose.
Change-Id: Ida4e5ac19c2da0a4298a97b2a8e1511d56bbb79d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This patch needs to be applied together with the parent change.
There are 3 basic cases:
1. The user doesn't write anything to the write channel:
You don't need to call closeWriteChannel manually anymore.
By default the QtcProcess you create is in ProcessMode::Reader mode.
Internally it opens the process in ReadOnly mode and
closes the write channel just after starting.
2. The user writes some initial data (after being started)
and then closes the write channel:
All what is needed now it to set the write data
(QtcProcess::setWriteData) before calling start.
You also use the default ProcessMode::Reader mode.
Internally it opens the process in ReadWrite mode
and writes the writeData asynchonously when the process
already started. After writing the data it closes the
write channel automatically.
3. The user writes the data also after calling start.
All you need now is to create a process with
ProcessMode::Writer mode. In this mode the write
channel is not closed.
Internally it opens the process in ReadWrite mode
as some writers also read the data from the process.
All the code base is adapted here to the above rules.
Change-Id: Id103019d1d71a3012fd1eade226fe96b9aaa48c2
Reviewed-by: hjk <hjk@qt.io>
To make clear that this is not just any finish.
Also change FinishedError to FinishedWithError, to create
symmetry.
Also adapt enum member description to reality.
Change-Id: I13e05391eb86fdb24e2ae660f14dfddb282e1104
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Make functionality dependent on an (intentionally ugly)
setProcessUserEventWhileRunning call.
Also, back-paddle a bit on API combination of QtcProcess and
SynchronousPrceoss for now and prevent the QtcProcess-and-
runBlocking and SynchronousProcess-and-start combinations.
Goal is still to have all in QtcProcess in the end, but this
may take a while.
Change-Id: Ic146ec5db0ab8dc9613e5b2af5f4dc90bc7465ca
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Makes run() more similar to what start() looks like.
Also add some asserts to make sure run() and related functions are
only called on SyncronousProcesses, as these are currently the only
ones where this works.
Change-Id: Idee6076c3f40a484db5c17f5bb348698cc83d220
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The result is fully stored in the object anyway. Using the extra
SynchronousProcessResponse structure only causes copies of
the data and complicates access on the user side in
a lot of cases.
The result bits are now also accessible individually.
There's obvious room for follow-up changes on the topic, e.g.
ShellCommand::runCommand's parameter list could shrink to
just a SynchronousProcess parameter.
Change-Id: I45aa7eb23832340be06905929280c012e1217263
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Mechanical to prepare merging the actual classes.
Adapting #includes.
Change-Id: I77a2c28129287778bc870c30cb890cd26bc2e62b
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Structurally more similar to what the other plugins do.
Change-Id: Ic664277b089ebf60241fc8627353721e0e2f3002
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
This is shown as tool tips in the location options, and if any platform
supports this also as tool tips on the menu actions of the locator input
field.
Change-Id: I8b439e45e6097a16a5f932d25d4e5d3e9bddb6ad
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
The coreplugin/id.h header is kept for downstream for now.
Change-Id: I8c44590f7b988b3770ecdc177c40783e12353e66
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Already exists in all implementations, but there was no common declaration.
Change-Id: Ieb3d10d1936c207722b5001712bce41e8114dcdc
Reviewed-by: André Hartmann <aha_1980@gmx.de>
All implementations return true unconditionally, and the return
value is never read anyway.
+ Remove superfluous function with the same name in Perforce.
Change-Id: I83f361ec7fd8be3177cb4be52e6276e295cd4279
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: hjk <hjk@qt.io>
There are very few reasons to use mainWindow() directly.
Especially for modal dialogs, using dialogParent() is important, since
that guarantees the stacking order in case of other dialogs currently
being open.
Change-Id: I7ad2c23c5034b43195eb35cfe405932a7ea003e6
Reviewed-by: hjk <hjk@qt.io>
