There is no + operator that takes a QByteArray and a QString (or vice
versa).
Change-Id: I8734923cbbb0360bc20f9775d57801803782716f
Reviewed-by: hjk <hjk@theqtcompany.com>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This adds a templated layer on top of TreeModel that can specify
item types for the top three layers in the model, relieving user
code from some of the previously necessary type casting.
Two common setups get an extra layer with convenience functions
on top: TwoLevelTreeModel for two-level model with a first level
of static headers and a uniform second level, and UniformTreeModel
where all non-root nodes are the same.
"Untyped" plain TreeModels are still possible.
The walkTree() feature and untyped iteration in the base
TreeItem and TreeModel is retained for now to ease transition
in downstream modules, but is planned to be removed soon.
Change-Id: I67d75a1a4e18e8f254dbfb458db03510d8990d8b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Easier to coordinate between dumpers and watchhandler
Change-Id: Ide191a5786dc04ef22c3e9c8b0bec39f8f8c0f1d
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Backends only have to specify whether an object members are sortable
in principle (e.g. all structs), and some numeric 'sortgroup' value
for member items (higher values are always sorted on top).
Change-Id: I10ce94580374fed48a35f058a575a1408d6801af
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Don't instantiate repeating boilerplate item data in some
cases (such as large arrays).
This makes it necessary to access parent WatchItems in
a lot more cases than before and needs another separation of
WatchItem/WatchModel code to keep the dumper autotests
in a functional state.
For a plain std::vector<int> with 1 mio items this reduces
extraction time from more than 2 minutes to about 3 seconds.
Change-Id: I175c5f6ee90434a6e85342d8bb71bd10a04dd271
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
... into a string specifying a kind of encoding (utf8, latin1),
an optional bytesize (2-byte integers, 4-byte integers) and a
flag whether the displayed value should get "..." around it.
Scales better than adding an enum value for each new combination.
Change-Id: Iffcb1e2f148f12da96e165559a976bd34026c649
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
The invalid ID is -1 and we shouldn't send 0 to the engine debug
service by default as that will select some random object as context
for expression evaluation.
Change-Id: Ide245468f787cc449ff50ac846c7ff31620c01b4
Task-number: QTCREATORBUG-14931
Reviewed-by: hjk <hjk@theqtcompany.com>
- Remove old experimental native mixed approach.
- Move some common stack parsing to Stackhandler.
- Mark gdbbridge.py debug output explicitly to remove it
from actual reponse handling
New native mixed needs QtDeclarative changes and
QTC_DEBUGGER_NATIVE_MIXED=1 for now.
Change-Id: I09eed1da51cea878636d36756015b7bfaed34203
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
- Move DisplayFormat from watchhandler.h to debuggerprotocol.h
- Add/update a few comments about the use of the protocol enums
- Make decodeData take a DebuggerEncoding instead of an int
Change-Id: I50bed70a5da2e94da46e894bf9136bc14c9a1b23
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Include hexadecimal, octal, and binary values as well
Task-number: QTCREATORBUG-7528
Change-Id: I73989414352c455fbad8aa210fc762c8cfc06c76
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Losing precision in case of 64 bit ints is ok in readNumericVectorHelper,
as the result is only used to plot data.
Change-Id: I7f0e4c332ee8302b0bb774a7eca2ff5823c37eac
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This removes the need of bookkeeping on the engine side. It's
basically a kind of mark-and-sweep: On update begin mark items
that are expected to change as outdated, while data arrives, undo
that marking, and update end remove all remaining marked items.
Change-Id: I739b84869033d511d5c9a80605c079e87ef4f6a7
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
This practically removes any functionality beyond plain plot display,
but does that at least reliably, cross-platform, without dependency
on 3rd party python packages.
Change-Id: Iaff2f78595394522f32264c642df20dd48b83f8b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
It was used for a hack to display QModelIndex with the compiled
dumpers. The hack is gone, no need for the member.
Change-Id: If8e439b51e0dbcf5c5ea58ad4b3adbbb161ced25
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... in WatchHandler and DebuggerEngine interface.
Adjust using code.
Change-Id: I6371f3e96ba46a783e23a5767cdde24a10d3fce7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
Change-Id: I91979c685bbbd84359f7f4e19911a21a408f5d23
Reviewed-by: hjk <hjk@theqtcompany.com>
The circle closes, that's where the code came from.
Change-Id: Ic36ab61ec8886c9a2747aeb29a7245df3ef0b6c4
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
An intermediate step to move the engines one by one to direct
WatchItem construction.
Change-Id: I563582498c4eeb3d604dfa046722133ab6d24650
Reviewed-by: hjk <hjk@theqtcompany.com>
Replace all* remaining deprecated Qt 4 functions with
their Qt 5 counterparts. This means we no longer need to
define the QT_DISABLE_DEPRECATED_BEFORE macro.
This patch is relatively small because most source-compatible
changes of this kind have been done before.
* The one exception is the QmlDesigner, which uses QWeakPointer
in a deprecated way all over the place.
Change-Id: Id4b839c6685f3b5bdf2b89137f95231758ec53c7
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
There are two values now, one to limit an entry in the L&E view
(default 100) and a hard upper limit (at 1 mio).
If displayed values are elided, the true length is shown in addition.
Change-Id: I180b70446c18e258c164e5af75b88d4c8b6c53f2
Reviewed-by: hjk <hjk121@nokiamail.com>
