Unlikely to make a difference in practice, but removes so unwanted
.toString/.exists.
Change-Id: I32c037aa87bb13cecb5b783fe0b36850e163f9c5
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The "false" default wasn't really useful.
This changes the default value to the following usages:
1. AndroidDeployQtStep
Introduced in 91f136ef3a
The synchronizer was used to cancel the running tasks inside
the doCancel(), so the similar behavior should be expected
when destructing the AndroidDeployQtStep.
2. GitClient
Introduced in f3106ebafe
Is used only inside the last line of
GitSubmitEditor::updateFileModel(). The running function
(CommitDataFetchResult::fetch) doesn't take QPromise<>,
so it can't detect if the future was canceled or not.
In this case this change is no-op.
3. ExtraCompiler
Introduced in c99ce1f455
The intention was to make it cancellable and finish
early on cancel.
4. PluginManager global future synchronizer
Introduced in 72bddf9f51
The intention was to make it cancellable and finish
early on cancel.
The relevant places in code are marked explicitly for
points: 1, 2 and 3.
Change-Id: I1a52deb8d1f81d355950c8772bbaa6d0a202fd7e
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The target of the connection determines in which thread the slot is
executed, and in these cases the slot needs to be executed in the
logging thread. But the LogTailFiles object is created and stays on the
main thread. So, the slot that was supposed to stop the event loop in
the logging thread was blocked from being executed when
IosToolHanderPrivate waited for the canceled threads to finish with
futureSynchronizer.waitForFinished().
Use the event loop as the "target" of the connections.
Amends 33e8251edf
Change-Id: Ie78fcb33b88c1fe7a138fac790fd4f3b7dd9bad9
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The iostool did always deploy the whole bundle, without taking
into account whether anything has actually changed. This meant
that for big bundles anytime the user starts the application
on his device, a full deployment was done.
For a ~1GB bundle this would take around a minute on a recent
Mac and iPhone 12.
This fix uses a new function from the mobiledevice framework
called AMDeviceSecureInstallApplicationBundle.
This function takes a new parameter "ShadowPathKey" which points
to a directory where the last deploy state is captured temporarily.
Before deploying to the device, the function compares
what is to be deployed against the last deploy state and
only deploys the parts that actually changed.
QtCreator provides a temporary folder for this. Due to this,
the initial deployment still does a complete deployment as
no state is available yet. All subsequent deployments
take the captured state into account.
For backwards compatibility, the old deployment method is left intact.
Fixes: QTCREATORBUG-24371
Change-Id: I4df6aa79d41b34c326d78be7952d7eeb23774648
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It already contained only static members, so creating instances didn't
serve a purpose.
Change-Id: I261503b606c21cf498dcd8470d5645d92d97c325
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Mechanical to prepare merging the actual classes.
Adapting #includes.
Change-Id: I77a2c28129287778bc870c30cb890cd26bc2e62b
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Saves some code on the user side.
Change-Id: I32cd220b6e533f5497a1865f9c34ab9db4cfda79
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This way we silence the clang warnings about calling
virtual methods from c'tor or from d'tor:
[clang-analyzer-optin.cplusplus.VirtualCall]
Change-Id: I8d6318b490152133da4833bda2ba28622bce30dd
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
In Qt 6 implicit conversion between QFuture and other types
is forbidden. Make it explicit instead.
See ff0ba7e2d7b91fd5809cb314935a1ca1a436f6c9.
Change-Id: Ie42e6b9b5047ba5eeec9f63fd03179e73f95314d
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
QStringRef is gone.
qsizetype vs int.
QMultiHash::insertMulti is gone.
QXmlStreamWriter writes UTF-8 by default.
Task-number: QTCREATORBUG-24098
Change-Id: Id217e40a1f17993a84fc725976e9cb84618b0580
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Mainly to get rid of the QProcess::finished deprecation warning.
Also adjust coding style in the surrounding connects when needed.
Change-Id: I12f9b248c7974b892c4a069356e578e80f8c59e9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Our canonical style is
#include <utils/fileutils.h>
rather than
#include "utils/fileutils.h"
Which makes sense, as such headers will never be found in the local
directory.
Change-Id: I4ca46e90d6c4d19d4b1f235f4c79caad864ef222
Reviewed-by: hjk <hjk@qt.io>
Instead, set the default level of all logs to QtWarningMsg.
The call to setFilterRules overrides the user preferences in qtlogging.ini.
Change-Id: Id5f6cd550d14ff7f45ae04c5d3110e0bafb0f072
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: hjk <hjk@qt.io>
... and make use of it.
With gcc 7, the new option -Wimplicit-fallthrough is introduced and
added to the -Wextra set, triggering dozens of warnings in our sources.
Therefore, we annotate all obviously intended fall-throughs. The ones
that are still left are unclear and need to be checked by the respective
maintainer.
Change-Id: I44ead33cd42a4b41c28ee5fcb5a31db272710bbc
Reviewed-by: Nikita Baryshnikov <nib952051@gmail.com>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
GCC 7 can't tell that it's unnecessary, so it complained.
registerhandler.cpp:528:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
Change-Id: Ia3e896da908f42939148fffd14c6a15f3ec05524
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Temporary files are created to redirect the console output of the
running app and the files must be created in the simulator's file
system
Change-Id: Ib0f1d8366ca1606b2988b028b0aac944e0fe3432
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Both wrap the corresponding Qt class, but make sure all temporary files
or directories are created inside a "master temporary directory".
Change-Id: I55461be507c828c965224c02863ea5ed9bbf9498
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
