De-virtualize requestInterruptInferior() and let always
the master engine react to the request. interruptInferior()
diverts to the active slave in case of the combined engine.
Change-Id: I5d62cf9379c8a452132827897a9ac51e4027f595
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and apply even more force on the second trying by forcing
ramp down of the runControl itself instead of hoping that it
would pick up hints.
Change-Id: I9d0f4130cb9a137b91c9fa81c3d255f236f98be0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Most were never re-implemented, so just for debugging purposes
in the mixed engine.
Change-Id: If569e0e553e3fdd5ef83b3bdfdbd22fd0ad5b90f
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Not needed anymore in the world of RunWorkers.
Change-Id: Id7fb24fece6acb03de12f2677dd99a05c513e7a4
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
There were only two used target states, and in case of mixed
debugging all parts of the machinery better agree on the
direction. So one bool in the (shared) runTool is sufficient.
Change-Id: Iffbf1651b82dde707cfc37d8da9d3da573b34b76
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The parameters belong to the run control, they should not
be triplicated in case of a combined engine.
Change-Id: I4dd84220edbd7a44b902cc52627fe01d0568db75
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Less debugger specific code and less convoluted paths in debugger
message handling.
Change-Id: Ib298889c386d65f17acbdfc585188097bb20ed74
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
doUpdateLocals() was called, but not re-implemented in the
combined case.
Task-number: QTCREATORBUG-17763
Change-Id: Id8c17ce0bda79cd61c57624aea5a05e4aad96c79
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
And take the opportunity to sprinkle more 'override' over the code.
Change-Id: I8b6b80653ca671e7681b7de2de5ad4288b281ccf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
There are two cases that do not coincide in asynchronous
engines such as the QmlEngine: Inserting a new watch item,
and expanding the children of an existing item.
Change-Id: Ic98a5f1e89aca37146039a241de737c407606e83
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
It's again a linear process now, with explicit entrance point for
all users.
Task-number: QTCREATORBUG-14618
Change-Id: I96c08947270ce34d7bc6c8be1d7f350dbfa14794
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This splits the bool setToolTipExpression() operation into
a bool canHandleToolTip(), and the actual processing of
the request, which is mostly identical to the handling of
a watcher.
Handling a watcher is now mostly the same as a full Locals
update, except for the 'partial' flag. Pushing the handling
of that down to the bridges gives identical code paths
in the gdb and lldbengine. Move that to the
DebuggerEngine base class.
Change-Id: I3861b43e8630c7e7bd57fcd549b2a2387e3d4869
Reviewed-by: hjk <hjk@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Right now, DebuggerStartParameter is part of the debugger plugin
external interface. Better not make it fatter than necessary.
Change-Id: I3b9205089f971dd314ccba1335b5ca2d4d9fe7c6
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
... in WatchHandler and DebuggerEngine interface.
Adjust using code.
Change-Id: I6371f3e96ba46a783e23a5767cdde24a10d3fce7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
The only information ever used is whether it's c++ or not.
Change-Id: I4ca00663856dd66cbdf58c468f175a8c9e41d6a5
Reviewed-by: hjk <hjk@theqtcompany.com>
Only needed in the non-Python days. CDB didn't use it to start with.
Change-Id: Ia609218cc1a694f797e278c4d99ead68e6212938
Reviewed-by: hjk <hjk@theqtcompany.com>
The actual data is now in a TreeModel. As interface to
individual breakpoints there's a new Breakpoint class
essentially providing a checked handle.
On the user code side breakHandler()->foo(bpId) is
replaced by bp.foo().
Change-Id: I82f435bad6301fce85a1d82bf6bf39e9ddba511e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Use register names as handle, not their index in the view.
Store the raw real values, not some stringified version
as primary data. Use subentries to break down bigger
registers into smaller entities. Also remember the
previous value of a register and show it in a tooltip.
Change-Id: I8ae3cc8766a7b211bc7cc827c734e5cf6060825c
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Has not been usable for a while and will be superseded by
"native" mixed stepping.
Change-Id: I2902a98b7ad4e4b29e389e54fb6488bf711840dd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... and some of the related implementation details
Change-Id: I1f03aa5acf2d3fb2cfc2a6a7845f3d3578b0408d
Reviewed-by: David Schulz <david.schulz@digia.com>
No need for a pimpl containing three pointers in an
internal class.
Change-Id: Iabafa5da4a684099cbfd3e945a642929a2cecf50
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
A lot of our build system files specify unneeded include
paths. These roughly fall into the following categories:
a) Paths that are already set in more general files
such as qtcreator.pri.
b) Paths that serve no purpose at all, possibly
left over from earlier versions of the project.
c) Paths that act as workarounds for wrong include
statements of the form '#include "xyz.h"', where
xyz.h is not in the same directory as the including
file.
This patch removes such path specifications and fixes the offending
include statements from case c).
Tested on Linux, Windows and OSX with qmake and qbs.
Change-Id: I039a8449f8a65df0d616b4c08081145c18ae4b15
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When an object is selected in the Inspector, the
Editor is updated to show the relevant code.
Task-number: QTCREATORBUG-8246
Change-Id: I4f7fbcccdeb22849682fa72c63e87a78f48d185b
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
