... and further unify GDB and LLDB code paths.
Change-Id: Id89f3804c53190c4888082891fd3c3c55eceac84
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The only information ever used is whether it's c++ or not.
Change-Id: I4ca00663856dd66cbdf58c468f175a8c9e41d6a5
Reviewed-by: hjk <hjk@theqtcompany.com>
Only needed in the non-Python days. CDB didn't use it to start with.
Change-Id: Ia609218cc1a694f797e278c4d99ead68e6212938
Reviewed-by: hjk <hjk@theqtcompany.com>
The removed parts were only used with the non-Python engine.
Change-Id: Ia6858517b011c6f7ace8b2521beafdb4b03efc89
Reviewed-by: hjk <hjk@theqtcompany.com>
There was only one user on GdbEngine::insertData left, and this
always took the !isSomethingNeeded branch.
Change-Id: Ibe51f7a7689be39ad3ffd60099a9cbe7b614648a
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
Causes more confusion for users than actual trouble. A hint is
still left in the debugger log, so it's not completely gone.
Task-number: QTCREATORBUG-3918
Change-Id: I51244094811bcb5c436f0631cb02dbf41cc202bf
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This also removes some of the "illegal" state transitions,
partially addressing QTCREATORBUG-14089.
Change-Id: I817d87a0b5e0a40285bc9b0880fef5bceaee3f16
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This partially reverts 38ec4dd6ae.
After using the new, "correct" behavior for some time I am
convinced that the original felt indeed better.
Change-Id: Ia921ccf8410bec33eb3053dc91bcca7b0328ef38
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
PageIds are supposed to be unique, so the CategoryId can be determined
from the PageId. Look for PageIds in the already expanded categories
first before searching through expensive categories.
Change-Id: I006beb0df6183453163ac1810fe59a306a0f52b1
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
Change-Id: I91979c685bbbd84359f7f4e19911a21a408f5d23
Reviewed-by: hjk <hjk@theqtcompany.com>
For potential re-use in qtcreatorcdbextension.
Change-Id: Ia5742b61c71fcd04eeaa894ed62218151d528a53
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The iteration in Python was only used for the 'native mixed'
case before. Seems reasonably fast and robust now to always
enable it. Also, make the calling code use 'runCommand'.
Change-Id: I10565a725dfaa9bf46c28739c69e9f2546498929
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Instead of calling a GDB extension command invoking a function
on the well-known Dumper instance, call the Dumper function
directly. This also makes the code more similar to the LLDB side.
Change-Id: I4b23177eb72a904721b63c578ce7fbfe204f02a2
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Mid-term goal is to reduce the amount of similar code
at least in GDB and LLDB engines.
Change-Id: I4883686a102246be3135ddc694b837b1187ac9e9
Reviewed-by: hjk <hjk@theqtcompany.com>
Mostly the timestamp and mechanical renaming.
Change-Id: I9a57302cba454b3c5cf6ce5c8279f817bf85cf2e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This was a debugging aid that has not been needed for a while.
Change-Id: Ia79e8e91b6648bdb807836443b01dd325d819640
Reviewed-by: hjk <hjk@theqtcompany.com>
They had been created for use with GDB, but are more general
nowadays.
s/GdbResponse/DebuggerResponse/,
s/GdbResultClass/ResultClass, etc
Change-Id: Idfa3e280cdda882a8b3f02dff7e7d993e7e82d03
Reviewed-by: hjk <hjk@theqtcompany.com>
Mostly done using the following ruby script:
Dir.glob('**/*.cpp').each { |file|
next if file =~ %r{src/shared/qbs|/qmljs/}
s = File.read(file)
s.scan(/^using namespace (.*);$/) {
ns = $1
t = s.gsub(/^(.*)\b#{ns}::((?!Const)[A-Z])/) { |m|
before = $1
char = $2
if before =~ /"|\/\/|\\|using|SIGNAL|SLOT|Q_/
m
else
before + char
end
}
if t != s
puts file
File.open(file, 'w').write(t)
end
}
}
Change-Id: I1aa1a2b6ccbafeb1a8f3053fffa39b3f96992591
Reviewed-by: hjk <hjk@theqtcompany.com>
So far we cheated by pretending removal always succeeds
immediately. Now just draw in grey in the view and remove
fully after the backend confirmed removal.
Change-Id: I0bd607774a3db0fe302b9654798be9dcc50abe8a
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This generalizes part of the previously GDB-only code paths
Change-Id: Id32798073e3c8bcb23bfedf463bebc866c8275e2
Reviewed-by: hjk <hjk@theqtcompany.com>
This is experimental for now and requires QTC_USE_PTY=1
in the environment to be used.
Change-Id: I460ce7b9283467d481e903f731f4243b7e5ec094
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
Better functionality and availability than the gnuplot version.
The feature ("Show array-like data in external plot window")
will be automatically enabled if 'from matplotlib import pyplot'
succeeds.
Change-Id: I1799534ac5f878d3e43e47289d1b563b52bb4378
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Saves up to 20% on large uniform structures.
Change-Id: I98c8c942f0accac7e2db1d8b06bf7ed156967306
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Only for GDB now, requires a debug build of Qt, not feature complete.
To enable it, run with QTC_DEBUGGER_NATIVE_MIXED=1 and press
the 'oo' button in the debugger toolbar.
Change-Id: I28aac9db13f7067e03cc364b89cc8046fa213dae
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
More flexible than hacking on the C++ side. Also registers
the custom dumper path to make it reloadable like the
"built-in" dumpers.
Change-Id: I0405f7278e28eb75d83fdd4a861f5a5c32d97a0e
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
