Contrary to what we assumed, long file paths cannot be split up
arbitrarily, but only at separators.
Fixes: QTCREATORBUG-22815
Change-Id: Id13036f3d73cc5d6b272066c0f8a26d9748ce6b8
Reviewed-by: hjk <hjk@qt.io>
Originally, the build manager used to run all build steps in a dedicated
thread. Communication between the step and the manager happened via a
QFutureInterface that was passed into the step's run() function.
Later, new steps were added that operated asynchronously, so the build
manager had to differentiate between the different kinds of steps for
starting and stopping.
These days, almost all build and deploy steps work asynchronously, which
made the QFuture-based interface look increasingly odd.
With this patch, all build steps are expected to work asynchronously, so
the build manager no longer needs to differentiate. Steps are started
and requested to stop via the run() and cancel() functions,
respectively, and emit the finished() signal when they are done. Build
step implementors no longer have to deal with a QFutureInterface. For
steps whose implementation is inherently synchronous, the BuildStep base
class offers a runInThread() function.
Change-Id: If905c68b234c5a669f6e19f43142eaa57d594803
Reviewed-by: hjk <hjk@qt.io>
The extra parameter was always computed but used only in one place,
and that use got removed lately.
Change-Id: Ie10c0107ca70ee97ce03f83294992aab8d1a3ffe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
We discern between local and remote timestamps, and if the local
timestamp matches, we still query the remote file via SSH to see if that
one differs. If so, we still upload the file. After uploading a file we
always query its remote timestamp and save it along with the local one.
Fixes: QTCREATORBUG-21225
Change-Id: Ieeae1c3e61907beb7ad0fe9b03772af6ae351be7
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The extra m_step member is not worth the abstraction, especially
since almost all non-SimpleBuildStepWidget have something similar,
too. Also, as several derived classes needed to correct
SimpleBuildStepWidget's setShowWidget(false).
Change-Id: I6e80d8c84c363b90dc27c70abd7fa6cefa1ed91e
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... by a bool member.
One reason less for the need of custom derived classes, i.e. one
step forward to a setup where the then-generic config widget can be
created in BuildStepListWidget::init() and filled with aspect-
created subwidget, reducing the need of per-BuildStep boilerplate
similar to what was done in RunConfiguration recently.
Task-number: QTCREATORBUG-19985
Change-Id: I85d26bdb6b35d0d6715782214328a40eef87286e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The old ones did not convey their meaning very well. In particular,
NormalOutput and MessageOutput were easily confused.
Change-Id: Ia0a8c1b1c366ab3f5c59f751b37b8b1f68f6831d
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Serialization of the "incremental deployment" setting was forgotten in
a8854b680e.
Change-Id: I0da294e50faf52a9473c682263ee299da675cb8c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Patch adds incremental deployment to the tar ball creation. Allows for
only changed files to be deployed in a single tar ball.
Change-Id: I28a0bd1220503125b75a664323b72906b479b821
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The heavy lifting was done by clazy.
Change-Id: I1a03435bbb4281bad4ff64baba0182e0050170d6
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Remove the finished() signal that is (sometimes) used to report that
a buildstep is done and use the FutureInterface for that purpose
consistently.
Change-Id: Ibe5520b562b91f1a7f4fc73ee898b33b930029ec
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
This information can be used to get information from earlier steps,
which e.g. queried for android devices to deploy to.
Change-Id: Iefe1c9443915cb6211f86f98ff7aaf3cb75145ba
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
New "Ignore missing files" checkbox was added to "Upload files via SFTP"
and "Create tarball" deployment steps. If checked, missing files will
produce a warning instead of the error thus preventing deployment
process from failing.
Change-Id: I0c3032746fbaae60aef2345802fc02c9951ab386
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
Ran script to remove inludes on a trial-and-error basis and
manually corrected it.
Change-Id: Ie7559562218ecab65da17f58e3515556a4a1d5c5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
They are deprecated in Qt 5. Use fromLatin1() and toLatin1() instead. In
Qt 5, these always do the same thing as their "Ascii" counterparts. The
same goes for Qt 4, provided QTextCodec::setCodecForCStrings has not
been set, which it hasn't.
Change-Id: I04edeb376762b6671eff8156094f0d5e2cb8e1ea
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
They are deprecated in Qt 5. Call std::memset and std::memcpy instead.
Change-Id: I53c22283208b4d6fdfcba870c3b141f3c02001bd
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Instead use the newly added abstractions from ProjectExplorer.
This makes the plugin qmake-independent in principle; any build system
can be used as long as the respective QtCreator plugin provides a way to
set up the required deployment information.
As a side effect of this patch, two features are lost:
(1) The ability to add a remote directory automatically for a
RemoteLinux based target. This was rarely ever useful, because any non-
trivial project requires more files to be deployed than just one binary.
(2) The ability to add Desktop files and icons for Fremantle and
Harmattan projects. Similar points as above apply here as well; such
projects should be set up via QtCreator's wizards or manually by users
who know what they are doing.
Change-Id: I2d7e621256f01143aafe3b191b04a120f053e672
Reviewed-by: Tobias Hunger <tobias.hunger@nokia.com>
Use Core::Id for all the project related objects in favor of plain
QStrings.
Change-Id: I790ab40cb29899efdb49c413a77609486f52e683
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Getting the #include directives ready for Qt5. This includes the
new-project wizards.
Change-Id: Ia9261f1e8faec06b9285b694d2b7e9a095978d2b
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
All these things were always conceptually per-target, but due to not
having a common target class we had to awkwardly implement the concept
using shared pointers.
Change-Id: I1bb1992a230a485d519a892a6ca602a6846fc3cf
Reviewed-by: Tobias Hunger <tobias.hunger@nokia.com>
Where the deploy stuff depends on the activeBuildConfiguration it's
likely to be wrong or worse could be used to crash creator. So make
those places stand out.
Also if we ever move towards supporting meta-builds of multiple
buildconfigurations at once, then using the active build configuration
is wrong.
Change-Id: I754a77a4a8b352e79e8a6703c26ed41a189cf74e
Reviewed-by: Tobias Hunger <tobias.hunger@nokia.com>
