Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Previous implementation uses MaxMessage and MaxRangeType constants to
specify events with undefined message or range type. This causes
backwards compatibility issue if new message or range types are
added, because those constants are also written to files when saving
profiler traces.
Add UndefinedMessage and UndefinedRangeType constants and use those
instead of the MaxMessage and MaxRangeType constants. This doesn't fix
opening old traces, but the same problem won't happend again with new
traces.
Also update profiler autotests with fixed data.
Task-number: QTCREATORBUG-28146
Change-Id: Ief003d39f871dd1ff2cc908e6a4d4b4678fd0868
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: <github-actions-qt-creator@cristianadam.eu>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This makes the tracing lib, its tests and the three plugins which depend
on the lib compile with Qt 6.
The rectangles are not yet shown most likely because some OpenGL
specific code was #ifdef-ed for Qt 6. That code needs to be
reimplemented on top of the new Scenegraph API, using the RHI instead of
direct OpenGL in a follow-up patch.
An assertion failure in QQuickWidget::createFramebufferObject() needs to
be fixed as-well.
The code still builds and runs assertion free (and the autotests pass)
when built against Qt 5.
Task-number: QTCREATORBUG-20575
Change-Id: I47ebb477823de2f0d27329dac7c292a466cea1d7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
We don't need the success and canceled signals from TimelineTraceFile,
as the future produced by runAsync tells us when a job is finished or
canceled. Also, we can just create the QFile inside the runnable to save
some code.
Change-Id: I7d91c60c1f798077573712cf624243e9f5969fd6
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This is a step toward making the trace manager non-virtual. It should
just juggle the storages for types and events, and manage the threads to
access them. It doesn't need to know what exactly it stores.
Change-Id: I45093c60d8ae921e68aeb09bd48d24d5877ce306
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
When we replay events we want to keep this constant and pass it to the
event receivers as separate entity. This way we can move the replaying
to a separate thread.
When loading we will have a similar situation, but then the loading
thread will create a new type storage and later assign that to the trace
manager.
Change-Id: I11402ed1e0663da6da5b61b15bba40e1a62adc4b
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This allows us to not only filter by ranges, but potentially also by
other criteria.
Change-Id: I7349ceeabbb2781473a3a4c803dab1006b7b8e50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Some compilers cannot discern the two replayEvents methods.
Change-Id: Ide4a893ff3976cb081fbbceefacafb6226f0a73f
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
This way we can use the trace file loading and saving mechanism for
other profilers.
Change-Id: I98ec1cdde6f7abcea152cabf72e64d4e696dfa59
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We always want either the total number of event types or one specific
type. There is no need to expose the fact that we keep them as a vector.
Also, use int as the type of the "number" methods as that aligns better
with Qt containers, and rename the methods. We don't need to state the
fact that we've loaded the events and types at some point.
Change-Id: Iaf680ec9fa10e1070ddee6bcc079800e401775f0
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Timeline will become a generic trace handling library. It needs some
abstract concept of events and event types.
Move operator== and operator!= for QmlEvent into the test as we don't
use them anywhere else.
Move the operators for QmlEventType to QmlProfilerTraceClient. We want
to get rid of the hash there as soon as we can assume that no
application we want to profile doesn't support server type IDs.
Change-Id: Icde4e3e7634e387171dc1d8bef7bbe8e71684a1a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We might get malformed events from the application. Clamp message and
range types into the allowed enum values when reading and reset the
event data when reading an invalid event.
Change-Id: Id76a3a8b8ed9378f9fb1acf15cf46d20758ca030
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
We might get timestamps that are outside the trace time, negative
timestamps, ranges that go backwards, and other insane things.
In order to deal with this, we clamp all negative timestamps to 0, and
treat the specified trace time as minimum range, that can be overridden
by events.
Change-Id: Iba661f2a4346077871fc62a46759e169b2aad49d
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
As we are using this as a queue, with many calls to takeFirst(), a
QVector is prohibitively expensive here.
Change-Id: I151452ae1299ab520a3aceae7ff3da0e29fe9bf9
Reviewed-by: hjk <hjk@qt.io>
If many events start or end at the same time, the parser would confuse
their order, resulting in meaningless statistics.
Change-Id: I05f94e694c16d6c22b6e937c2f979ce572a068d1
Task-number: QTCREATORBUG-17885
Reviewed-by: hjk <hjk@qt.io>
We keep it private to QmlProfilerModelManager and proxy the last few
methods that were directly called on the model. This enables us to
remove the QmlProfilerDataModel class by integrating what is left of it
into QmlProfilerModelManagerPrivate in a next step.
Change-Id: Ie9b4e03fb286e5a0040374d00b7b26f810426278
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The inserting of events into the buffer is not the bottleneck here.
The book keeping is probably more expensive than just always using
all the events contained in a chuck from the file for one batch.
Change-Id: I75a936fdf9e3a1d9675b44d67b98f14594f87ffd
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
If we cannot open a temporary file to cache a trace or retrieve a
previously cached trace, the QML profiler won't work correctly. Show
an error in this case.
Change-Id: I468d74d9c33033b9ad19501bccbd69a9fe164fed
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
* Clear the trace and send the loadingFinished() signal when loading
fails or is canceled. loadingFinished() re-enables the UI, which is
in fact important.
* Check more consistently for whether the operation was canceled and
add a separate signal for that.
* When saving fails or is canceled, remove the half-written file.
* Don't try to guess the number of events for progress reporting when
saving. Use the event timestamps and start/end time instead.
* Properly initialize the progress range in all cases.
* Drop the bool return value from the load methods. Nobody uses that.
* Send loadFinished() only after loading a file, not every time we
reach the Done state.
Change-Id: I507f11c667e20534ea335e84798de11aa06fb6f2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This significantly reduces the number of signals necessary when
loading traces. The overhead of queueing those signals across threads
was responsible for up to 80% of the time required to load a trace.
Change-Id: I461a2ef9944b0be102a29f8ed6b2b3f2f59f3c0f
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This way we can improve the heuristic used for mapping notes to
timeline events, by taking the row into account. Also, by marking
notes as loaded when loading them we avoid accidentally dropping
them by restricting to ranges.
Change-Id: I031389880571805788c910728ee89333a5cd4727
Task-number: QTCREATORBUG-16542
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in turn, make its members private, so that we don't accidentally
change them.
Change-Id: Ibc65b406ee341d33f69647ed1b19e1e34f5cd535
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
The only member that can change after initialization is the text.
Change-Id: I6958f510e67c9fd6fe1f109c2676f80d93e7fd0c
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
You should not change them independently as that is error-prone.
Change-Id: I07890a29b045492fe804b9537094dea763bc1b8d
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Storing traces in binary form is preferable as loading and saving is
faster and the trace files are smaller.
Change-Id: Ia7340ac526d5ce9391b1e32fc48fc1fab3ffa13d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As we only ever iterate the master event list in a linear fashion, we
can use a temporary file to store it. This should allow for larger
traces to be handled without running out of memory.
Change-Id: I0d2aea6f998458fe5f426f6fef0f6937e915ae68
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This removes the last access to the master event list, which allows
us to also remove the accessor function.
Change-Id: I0e70c2eb23d2b11aa8b131c03eb3adfad1a9b9e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We want to get rid of the big master list of QmlEvent in
QmlProfilerDataModel, as that gets very large for longer traces. In
order to reduce the dependencies on that list we load the events on the
fly into the child models while they are being received, rather than
having the child models query QmlProfilerDataModel for the event list
later.
As the trace client so far only emitted rangedEvent() for complete
ranges we run into problems with models that need their events sorted.
The rangedEvent() signals were sorted by end time, rather than start
time which makes it inconvenient to analyze them in a stack based way,
for aggregation. This is solved by passing on all the details from the
trace client to the models, with the QmlProfilerDataModel aggregating
the type information before having the events dispatched to the child
models.
Change-Id: I5831a20551f21cf91e27d298a709f604ebd96c3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The QmlTypedEvent is mainly useful to read a generic QmlEvent and
QmlEventType from a QPacket. QmlEventType has a stream operator to do
exactly that. QmlEvent also gets further options to store 32-bit data
in addition to 64- and 8-bit data. Also, with the more generic storage
layout we can reduce the memory consumption of range events by 50%.
This comes at the cost of additional memory allocations for non-range
events, but as non-range events are significantly less frequent than
range events, this is a good tradeoff. Finally the new storage layout
lends itself to efficient serialization, which will help when
developing new storage and transfer formats for QML traces.
Change-Id: I420de68b0142f23c8fb2ca8b329d7ffe69c83fe0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
As many events are instantaneous and we're going to drop the duration
property soon, this is more fitting.
Change-Id: I6e13dd076a5b9df16aed44bf9f631ea5760e9cbf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Move them out of the QmlProfilerDataModel class, drop the "Data"
suffix, and rename symbols that refer to them in order to call them by
their names.
Change-Id: I41151359921b325edb79111371083c4185bd148b
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
These file were not used anywhere else and had no business to be in
qmldebug to begin with. Moving them allows us to drop a number of
namespace qualifications and forces us to rename a few local symbols
in other classes in order to avoid name clashes.
Change-Id: I658ed455eec027cbaddacf2980d2ea6827ae6205
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
We cannot assume that the model manager is still available when the
operation finishes. Also, accessing the QML model or the trace time
from the thread is dangerous.
Change-Id: I673c57c09490a0e3e2647f3197929eff1ce4ceb3
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
A separate model will show them in the timeline for better orientation.
Change-Id: I537bac82ddef6a8bcc64ae403731512f8edcc9db
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The restriction to put all strings in the type data is becoming a
burden to further enhancements. Also, introduce proper ctors for all
event structs.
Change-Id: I42d3bac96155ac1ac183a2b82785ce0396c5a932
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The ProgressManager can only deal with at most (1 << 31) / 100.
Change-Id: I03c61839fa5b9dab56b99f98a63ed7ab8b340c09
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This way we can have a central filter menu to hide and show features
in any connected views.
Change-Id: I8142da0062a23f8166555016de6c7cb38060f725
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
