On the user-visible side, only the 'Analyze' mode button disappears,
and instead a combobox to switch between different tools in appears
in the Debug mode toolbar.
Internally, that's quite some re-organzition: The centralized
'Analyze mode is busy' flag is gone, allowing us to run e.g.
ClangStaticAnalyzer and MemCheck in parallel.
Analyzer tools and debugger now share the same mechanism to
generate/load/save dock widgets.
Analyzer tools now create and handle their own start/stop button
when appropriate. In general, Analyzer tools can create/handle more
than one run control at a time.
Further consolidation is possible, e.g. RunControl state handling
could be merged into the base ProjectExplorer::RunControl to
avoid the still existing duplication in ~15 instances.
Change-Id: I91e5940ebc4211f98056d507cf2f7b5f8efe7f07
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Put the border between plugin code and view code in a more
natural place.
Change-Id: Ib5250a30e52ec9899dcb01bac23cdad62a2d5c5e
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Decouple layout generation from widget generation and
separate analyzer action description from menu action creation.
Tool specific layouts are named "Perspective" now.
Change-Id: I774efe77a07640c4cc26e4e566662c8a673c8831
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This is the first mechanical step to execute on the 'shared pool of
debugger/analyzer views' idea.
Future steps would be providing infrastructure for the view pool,
making all analyzer/debugger views use the pool and then re-extract
a sensible base for a 'analyzer-and/or-debugger' tool plugin interface.
Change-Id: I1bb392e6dd3084fc56937956bee1d6fd9530335d
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Most of them need a run configuration. It's better to pass the
right one than to use various hacky ways to work around it.
Change-Id: Ic21b0ef33bdd79b526b1e1a1ead5ca87d9f32c4d
Reviewed-by: hjk <hjk@theqtcompany.com>
* SysRoot can always be determined from kit.
* Pass around RunMode as extra parameter
not as part of AnalyzerStartParameters.
That's closer to the pattern used elsewhere.
* Environment was always initialized from the runconfig's
EnvironmentAspect. The tools can do that directly.
* Provide setter for display name for cases where
it is not equal to RunConfiguration::displayName
Change-Id: I811a0d7cdeb55cc37a16a593b3942abb567a2150
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Flushing data while the application is running can distort the results
because the flushing itself takes time. However, not flushing leads to
longer load times in the end and higher memory usage. The best strategy
depends on the application being analyzed and the users should decide
if they want to flush or not.
The settings infrastructure also paves the way for preserviing the
layout of the timeline and statistics views as well as the category
filters across sessions.
Change-Id: I2cdc37c7fc7eb9b05b6870955ddffaa712d6c956
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This provides a way for third-party plugins to implement run
modes without the need to add a value to the central enum or
using manual workarounds like RunMode(*(int*)&someUniqueObject).
Instead of centrally defined enum values this uses Core::Id that could
be defined anywhere.
Change-Id: Ic350e3d8dbb8042c61b2d4ffec993ca151f53099
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Also rename ToolStarter to CustomToolStarter to make clearer
that this is not the normal startupProject based setup.
Change-Id: I6c538eed9280e0c02912954541423f030e88585f
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
The toolPreparer can do a last minute check and stop the execution of
the actual tool. The QML profiler uses this to check for unsaved notes.
Change-Id: I5185430f50ffb01e9854cafa442f0eaaad27fa5d
Reviewed-by: hjk <hjk@theqtcompany.com>
This is what it is on the top level. The change makes it obvious
that in the valgrind(-derived) plugins the value is later wrongly
used to make a decision on whether to run the valgrind process
locally or remotely. But that's isolated in valgrind now and
can be fixed there.
Change-Id: I6fa5e669dec1f9e2cdebe42a1591d15144082a21
Reviewed-by: Anton Kreuzkamp <anton.kreuzkamp@kdab.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Fallout after the demise of IAnalizerTool.
Change-Id: I68f936ed5f2929dc4f09a408bdf6b0ea38e568ef
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Slim down tool before dissolving.
Change-Id: I502aaa8860293acf8bfd93f541b751d5b96a9563
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
The model factory only exists if there is a plugin providing it. Also,
it's a good idea to initialize it.
Change-Id: I904bae1e733c37699a99e84e79c67ab4e8aea805
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
We need a general purpose TimelineModel and a specialized
QmlProfilerTimelineModel.
Change-Id: I2da02d65efa11e160cab5fa9f8a21075beb0e2bf
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This relieves us of the headaches created by figuring out what should
happen if the model manager is changed later. Extension models can be
safely created through a factory.
Change-Id: I8cf8fd6d639e4e6c9da66351ea44cfc35fd614a5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Remove usage of the Q_EXPORT_PLUGIN macros, which do not exist in Qt 5.
Change-Id: I678c3cf10b9c5d5c1b9f252b0ecd1c97dc810a47
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Christian Stenger <christian.stenger@digia.com>
This wraps the menu related aspects of an IAnalyzerTool.
Change-Id: I065cb5f269a40af2137f434a7cdf915bd9a76839
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
Separating out the run control factories is the initial
step towards separation of run control from QML profiler
engine. The goal is to to make the engine agnostic of
the run control.
Change-Id: Ic8279755f0188ab53253a62322fcccf1c17b6aaf
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
Getting the #include directives ready for Qt5. This includes the
new-project wizards.
Change-Id: Ia9261f1e8faec06b9285b694d2b7e9a095978d2b
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
