This allows to run any command without knowing the current state of the
debugger engine. Replacing the old special stop mode for any command
that may be triggered while the engine is running, with a check in
runCommand. If the engine is running while a command is triggered a
callback is added to the interrupt that will execute the command as soon
as the engine is accessible again.
Change-Id: I8bb1914b92da2b03e76c2c2ec8293d13041c72fd
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It was needed in the past to trigger e.g. gdbserver setup in
remote cases which is nowadays handled by separate RunWorkers.
Change-Id: I30bce071dab0779cce2e7abef7b31550d8539461
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
... and apply even more force on the second trying by forcing
ramp down of the runControl itself instead of hoping that it
would pick up hints.
Change-Id: I9d0f4130cb9a137b91c9fa81c3d255f236f98be0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The parameters belong to the run control, they should not
be triplicated in case of a combined engine.
Change-Id: I4dd84220edbd7a44b902cc52627fe01d0568db75
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
And take the opportunity to sprinkle more 'override' over the code.
Change-Id: I8b6b80653ca671e7681b7de2de5ad4288b281ccf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
With QT_RESTRICTED_CAST_FROM_ASCII making GdbMi etc operate on
QString is feasible again. Take this as opportunity to move
debugger encoding handling closer to a 'conversion on input and
output if needed, storage in QString only' scheme.
Change-Id: I2f10c9fa8a6c62c44f4e6682efe3769e9fba30f7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Saves an asking for debugger log roundtrip when the information is just
visible in the verbose log. Was just used inside the cdbengine.
Change-Id: I9801d3ccd8f273c3b4afcf053b00e7af0953a63f
Reviewed-by: hjk <hjk@theqtcompany.com>
Use the command token as the key. Simplifies the CdbCommand,
because the command token doesn't need to be stored in the class.
Change-Id: Ic43ba16529db6e11ce00db1db49b384a627a4941
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
It was just used for diagnostic messages. The commands
can still be identified via the token in the messages.
Change-Id: If1c6f9e66bd65d9d3a16cb403d297c83b0c52d0e
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
This way the id doesn't have to be parsed from the command.
Change-Id: I8beb15c6d98a6628f373cf44b724dd4267efb728
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Simplify the CdbResponse to become more like the DebuggerResponse.
Change-Id: Ifdd7c69e340b4c18c0e1187eb2173979feccd5b9
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
This also removes the need for a command flag.
Change-Id: I6ad8a2c5d49673783cf06a2612c33e0cd5555706
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Fixes an enormous amount of clang warnings.
Also remove the "virtual" keyword from these functions, as per our
coding style.
Change-Id: I4c8a75504e20d8fe827304a9fe362e9b64847b8a
Reviewed-by: hjk <hjk@theqtcompany.com>
Makes clang happy, and changes to a full update after manual
variable assignments, which is intended anyway.
Change-Id: I028f32e1ac9014f5d56bf12824624f7685d22c83
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
This splits the bool setToolTipExpression() operation into
a bool canHandleToolTip(), and the actual processing of
the request, which is mostly identical to the handling of
a watcher.
Handling a watcher is now mostly the same as a full Locals
update, except for the 'partial' flag. Pushing the handling
of that down to the bridges gives identical code paths
in the gdb and lldbengine. Move that to the
DebuggerEngine base class.
Change-Id: I3861b43e8630c7e7bd57fcd549b2a2387e3d4869
Reviewed-by: hjk <hjk@theqtcompany.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Right now, DebuggerStartParameter is part of the debugger plugin
external interface. Better not make it fatter than necessary.
Change-Id: I3b9205089f971dd314ccba1335b5ca2d4d9fe7c6
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
... in WatchHandler and DebuggerEngine interface.
Adjust using code.
Change-Id: I6371f3e96ba46a783e23a5767cdde24a10d3fce7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
The only information ever used is whether it's c++ or not.
Change-Id: I4ca00663856dd66cbdf58c468f175a8c9e41d6a5
Reviewed-by: hjk <hjk@theqtcompany.com>
Only needed in the non-Python days. CDB didn't use it to start with.
Change-Id: Ia609218cc1a694f797e278c4d99ead68e6212938
Reviewed-by: hjk <hjk@theqtcompany.com>
After dropping the QVariant cookies the structure is not needed.
Change-Id: Ib6f702bedeb250518ac0b7019e32d2caa62eb616
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
Thanks to lambdas we can now pass them directly.
Change-Id: I3d5189596c41f84adc168ec093051f4400da04c7
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
This was introducing more code duplication then it saved. Put
everything into a CdbCommand class for now.
Change-Id: I32180da2ab70da28a890a7d8ac72170ee0dc0ff2
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
The actual data is now in a TreeModel. As interface to
individual breakpoints there's a new Breakpoint class
essentially providing a checked handle.
On the user code side breakHandler()->foo(bpId) is
replaced by bp.foo().
Change-Id: I82f435bad6301fce85a1d82bf6bf39e9ddba511e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
