This does not seem to affect the code paths we are using through
Python.
Task-number: QTCREATORBUG-23965
Change-Id: I2e20d6d3c1937d56293e81b74c453e83a92ddc4c
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
As the addresses were only matched against upper case letters
all registers with lower case characters were not correctly parsed
and had zero values
Change-Id: Idc3da0a33b9f075d7a209cad74768e81cced2d67
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: hjk <hjk@qt.io>
This was only ever working with SuSE and GDB, and nobody
ever tests it, nor asks for extension to other setups.
Change-Id: I7b1e3cc8c9f71df4c86b957a79d5afe02eec0758
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
If the debugger engine is not running there is anyway no need
to update its data.
Change-Id: I8cda9218985db8b88d96046254847e8916ca37eb
Reviewed-by: hjk <hjk@qt.io>
For Compile, BuildSystem and Deployment. Unclutters user code and reduces
binary size.
Change-Id: Ia18e917bb411754162e9f4ec6056d752a020bb50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
In line with the general move toward use of FilePath nowadays.
Change-Id: I1c50e1479f7d9100ff8ded3ce3c22dd82b7fe6aa
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
A bit closer to where the functions are used. No real change.
Change-Id: Icbad68bd31d85caa59980316537ee532faf2d7ef
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This feature is useful for the bare-metal programming. It allows
to view the peripheral registers of the debugged device using
the GDB.
An information about the peripheral registers for a concrete
device contains in a special SVD file. A format of this file
described e.g. here:
* https://www.keil.com/pack/doc/CMSIS/SVD/html/svd_Format_pg.html
This feature supported only for ARM devices, and an appropriate
SVD files can be found in the Internet, also this files provides
by KEIL or IAR EW IDE's.
A use case in QtC is that the user should to choose desired SVD
file and set its path to the bare-metal device configuration widget.
After this, the user can enable the "Peripheral Registers" view,
choose a desired register group and to see a peripheral register
values.
Currently the following basic features are implemented:
* Choosing SVD file for a target bare-metal device.
* Choosing any peripheral register group, which is available for
this device.
* Seeing the info about the each peripheral register and its fields.
* Seeing the value for the each peripheral register and its fields.
* Changing the value for the each peripheral register and its fields
(if it is allowed by access for a concrete register or field).
* Changing the format of the values (hexadecimal, decimal, octal,
binary).
Fixes: QTCREATORBUG-18729
Change-Id: I3c38ea50ccd2e128746458f9b918095b4c2d644a
Reviewed-by: hjk <hjk@qt.io>
The reasoning in 1b4766e26c did not take into account that the scope
of QT_NO_JAVA_STYLE_ITERATORS may change over time, as done with
f70905448f6 in Qt base.
Change-Id: Ib1966ff26c4d36d5f62e149d6b45baa4aecf825d
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This level is meant to take the role of current thread handler
in the long run, allowing per-thread stackviews in each engine.
For now, the additional level holds just a single, invisible
dummy item playing the role of a "current thread".
Change-Id: Ief6131500fc1aa8902f2313038a65840b80b495b
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
We regularly pass around strings or filenames or pairs of strings
or filenames and stringlist etc the in the end will be used
as a kind of "command line", with quite a bit of ad-hoc user
code and QtcProcess::addArg etc to set them up and manipulate them.
Let's have a class for that concept.
Change-Id: I288ab939d853b32c717135a65242c584c2beab50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Should help to drill down to individual expensive dumpers.
Change-Id: I983ba075231784f71dd9d5c3bda375a3ee508bf6
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Looks like the mainwindow cannot be convinced to handle multiple
sets of dockwidgets.
So switch back to a single set containing everything and keep
track of non-default visibility in the perspectives, and persist
these sets.
The following pass:
1.
Start Creator with new settings
Goto Debug Mode
Move Break dock widget to right, switch on Global log widget
Leave Creator
Start Creator
Goto Debug Mode
Check: Debugger Selected, Break on right, Global log visible
2.
Start Creator with new settings
Goto Debug Mode
Move Break dock widget to right, switch on Global log widget
Switch to QmlProfiler sub-perspective
Leave Creator
Start Creator
Goto Debug Mode
Check QmlProfiler selected
Switch to Debugger sub-perspective
Check: Debugger Selected, Break on right, Global log visible
3.
Start Creator with new settings
Use any C++ test project
Start debugging / stop at main() (F10)
Wait for stop
Switch to Edit mode
Switch back to Debug mode
Check: Only "running" debugger dock widget layout present
(not the normal + preset at the same time)
Quit Qt Creator while this debugger is running
Check: Shuts down without crash
4.
Use any C++ test project
Start debugging
Switch to Debugger Preset perspective
Start a second debugger
Kill either instance
Check: Application dies, Debugger Preset perspective gets displayed
Switch to perspective of second instance
Check: Perspective looks ok (docks visible as before)
Task-number: QTCREATORBUG-21083
Task-number: QTCREATORBUG-21669
Task-number: QTCREATORBUG-21668
Task-number: QTCREATORBUG-21813
Task-number: QTCREATORBUG-21851
Task-number: QTCREATORBUG-22110
Task-number: QTCREATORBUG-22169
Task-number: QTCREATORBUG-22189
Change-Id: Ic9eb41ff7699ac0f48a85e68376daa80b2b6847e
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Store the unexpanded string in settings and expand on execution.
Change-Id: Ib3160a548b7501b22d120629a6376e2252df32e5
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Mainly to get rid of the QProcess::finished deprecation warning.
Also adjust coding style in the surrounding connects when needed.
Change-Id: I12f9b248c7974b892c4a069356e578e80f8c59e9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Too much cleverness in python command detection: "attach" is parsed
as possible Python command. Make it explicit that it is not.
Task-number: QTCREATORBUG-21908
Change-Id: I68444bccfb485ef1befe81b4b6b13243c2c8a500
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
When the breakpoint is put on a non-code line, it will be moved to the next
line that has debuggable code on it. When attempting to reset the
breakpoint to the originally requested line, this causes an infinite loop
of removing and re-adding the breakpoint.
Fixes: QTCREATORBUG-21611
Fixes: QTCREATORBUG-21616
Change-Id: I8943de0eae991644eb6728f491010599f62192ff
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: hjk <hjk@qt.io>
... for temporary stops.
The transition is not unexpected, we just failed to communicate the
expectation.
Change-Id: I30cdcffdcc3672e759023cd0c07de4bea11c2e32
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Main menu action pass operation to current engine, everything else
is handled there.
Combine execute{Step,Next} and execute{Step,Next}I functions.
Implementation were mostly similar, in some cases unneeded
(the instruction-wise version e.g. for Python)
Drop GDB-isms 'step', 'next' in favor of 'step in' and 'step over'.
Change-Id: I232232bc7a67d9d297a74f1c81dc43be96787d34
Reviewed-by: David Schulz <david.schulz@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
GDB doesn't provide thread-core on core dump debugging.
Give the user the option provide it.
Change-Id: I15eae0280243ce307b9045be33e4b28e9b9c64d0
Reviewed-by: hjk <hjk@qt.io>
