Instead of a blunt delete() RunControl::initiateFinish() is triggered
by the closing of the application output instead. The rampdown process
is basically the same as stop() now, except for the other success
signal (new finished()) and the final self-destruction of the
runcontrol.
stop() itself triggers initiateStop() on all running workers in
parallel (before it was in the order of start). This gives
downstream complex worker combinations the flexibility to use any
order it wants by ignoring stop() on 'uninteresting' workers,
and centralizing rampdown e.g. in the main worker. That setup should
be rare in practice, but seems needed in some profiler cases.
Change-Id: I986a152a663754206709ed4df0d4568847afad17
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
A RunControl is re-runnable if all its workers are,
a RunWorker is re-runnable if it's Stopped and unless it
says otherwise.
Also ensure SimpleTargetRunner only reportStop() once
per run and make process error message re-usable.
Change-Id: I73f5fb724d3026ceb81d5e32a3a71b4814b2bca9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Remote CallGrind is still dysfunctional.
Change-Id: Ib9ab537dc068c94c7e61ac48b1a4b9d655ccb60f
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
It's only used internally as one-time communication between
worker and the *Tool singleton that handles toolbar button
states.
We basically start immediately after creation of the worker, so
any pre-start tool bar specific operations can be done at
RunWorker creation time.
Medium term, the runworker should proably steer "their" buttons
more directly.
Change-Id: Id6df703746ece5eebc23507739cd2a92ec55d11d
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... instead of having one in each derived class.
Change-Id: Icd121ce46b1d161bd2d59eaeaad8363528dc3c23
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and QmlProfilerRunner::Configuaration by PE::UrlConnection,
and call it 'serverUrl' on the user side.
That's the only variant we ever had and avoids "translations"
between three structures that are essential the same.
Change-Id: I33386b2b8d2a7985ff934f6f8f840de0831bf9c1
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This increases re-usability of activities like 'port gathering',
and makes their use less dependent on actual device implementations.
Change-Id: I017cb74874f2b38c487ba2d03906a675d5618647
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Forward all tool and target activities to run control, and initiate
further state transitions (only) from there. Also, make sure
tool/target's on finished() triggered on all finishing code paths.
After that, the base state handling is sufficient to handle remote linux
running and debugging.
Change-Id: I0150ef249c9ad0b7b8ac7192be6dc860c9ca8fc5
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Removes one reason to derive from base RunControls (specifically
ValgrindRunControl).
Change-Id: I81e32a49ef30e79ee7e7b53a54021eaaba43453a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
That's a good first approximation and often enough all that is needed.
Change-Id: If54cdb0e98cda94bc4a4ef24fcc12c78018c4dbe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The change is "conceptually wrong", the AnalyzerRunControl derived
classes' functionality should be provided by ToolRunners based classes
encapsulating/"being" the current Analyzer*Runner classes.
However, the AnalyzerRunControl is only three (empty even) virtual
functions, but a big obstacle in merging attempt due to a lot of
mechanical followup changes in downstream users.
The current construction mechanism of analyzer run controls is actually
two different mechanisms (locally direct RunControlFactories, and a
"generic" createAnalyzerRunControl wrapper for remote cases). The generic
createAnalyzerRunControl makes it difficult to migrated them one-by-one,
due to the various downstream users.
So instead of merging the per-analyzer two uses directly reduce
the "indirection" distance by removing the AnalyzerRunControl
intermediate layer. After that the createAnalyzerRunControl mechanism
can be dissolved by using normal RunControlFactories also for
the remote cases. After that, porting to ToolRunner, and combining
with ther local equivalent can be done one by one.
Change-Id: I0ddace33fcce210cf3a547ac5bb23b3d85013934
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This introduces a mini-state-"machine" to handle RunControl states
Intialized->[Starting->Running->Stopping->Stopped->]*->Finished.
Needing time between trying to start and getting feedback is nowadays
the normal setup for all remote targets as well as for most local tools.
Making that the default for all runs simplifies the code and provides an
opportunity to (a) fix some currently wrong reports of "stopped
immediately" and (b) to remove target-specific (WinRT) or tool-specific
(Valgrind, GammaRay) state members doing essentially the same.
Change-Id: I7f52fee41144188ee8389e922fdc265f8c0a6459
Reviewed-by: David Schulz <david.schulz@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Provide protected methods in RunControl to handle the notification
of when the RunControl starts and stops. Use these helpers to
move the isRunning() method into the RunConfiguration itself instead
of reimplementing it everywhere.
Change-Id: Ia8de42f7a6a14a049870d4e7fcb9af6756c2caa4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Giving individual RunControls the freedom back to decide what they want,
even if they currrently decide to use the same one.
Change-Id: Ia2acf4b9d32d23c486339b2488611038672aba25
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
On the user-visible side, only the 'Analyze' mode button disappears,
and instead a combobox to switch between different tools in appears
in the Debug mode toolbar.
Internally, that's quite some re-organzition: The centralized
'Analyze mode is busy' flag is gone, allowing us to run e.g.
ClangStaticAnalyzer and MemCheck in parallel.
Analyzer tools and debugger now share the same mechanism to
generate/load/save dock widgets.
Analyzer tools now create and handle their own start/stop button
when appropriate. In general, Analyzer tools can create/handle more
than one run control at a time.
Further consolidation is possible, e.g. RunControl state handling
could be merged into the base ProjectExplorer::RunControl to
avoid the still existing duplication in ~15 instances.
Change-Id: I91e5940ebc4211f98056d507cf2f7b5f8efe7f07
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This is the first mechanical step to execute on the 'shared pool of
debugger/analyzer views' idea.
Future steps would be providing infrastructure for the view pool,
making all analyzer/debugger views use the pool and then re-extract
a sensible base for a 'analyzer-and/or-debugger' tool plugin interface.
Change-Id: I1bb392e6dd3084fc56937956bee1d6fd9530335d
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Make isLocal() less intrusively used and correct. Use the stored device
more often, also handle errors more quickly.
Change-Id: I146d1f5788ea79d0a9d7b058c81908d451cf00d0
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
These re-implementations are conceptually "too specific". Rather let
the indiviual tools handle there expectations themselves.
Change-Id: I0bbea407b2241816a40d19eb1dbb0a7589cbda7b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Instead, use the one in its (Standard)Runnable.
Change-Id: I14dbe91c50d083d11e18d514ec391875c64e3851
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Instead, use the one in its (Standard)Runnable.
The change is mechanical except to the fallback to the project directory
which was introduced in 8150209f to keep some compatibility with the previous
setup of the Android runner which created and copied the fallback value around
and ignored it in the end. Not producing the fallback value is less effort.
Change-Id: Ie04da570f0f9fbc1d048f2eacaed522f7253afa3
Reviewed-by: hjk <hjk@theqtcompany.com>
... with a lot potential to code consolidation.
Change-Id: I4d3a7fcc1cc6ae8763799f18cf9701695f387791
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Remove unneeded function arguments, Qt 5 connects etc.
Change-Id: I95faf80e7b5ccc574e2457b841f7913bc2aa05d3
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... into AnalyzerRunnable and AnalyzerConnection and use the
RunControl's storage instead of an own copy in AnalyzerRunControl.
This is an intermediate step on the way to remove
AnalyzerStartParameters.
Change-Id: Iee7c38781b2fd6ef030dcdada1993684cbb34c74
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
* SysRoot can always be determined from kit.
* Pass around RunMode as extra parameter
not as part of AnalyzerStartParameters.
That's closer to the pattern used elsewhere.
* Environment was always initialized from the runconfig's
EnvironmentAspect. The tools can do that directly.
* Provide setter for display name for cases where
it is not equal to RunConfiguration::displayName
Change-Id: I811a0d7cdeb55cc37a16a593b3942abb567a2150
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
This does not need to go through the PE machinery.
Change-Id: If0b2fde5309d7e119e8ac27245a22939b68d847d
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This is what it is on the top level. The change makes it obvious
that in the valgrind(-derived) plugins the value is later wrongly
used to make a decision on whether to run the valgrind process
locally or remotely. But that's isolated in valgrind now and
can be fixed there.
Change-Id: I6fa5e669dec1f9e2cdebe42a1591d15144082a21
Reviewed-by: Anton Kreuzkamp <anton.kreuzkamp@kdab.com>
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Mostly done using the following ruby script:
Dir.glob('**/*.cpp').each { |file|
next if file =~ %r{src/shared/qbs|/qmljs/}
s = File.read(file)
s.scan(/^using namespace (.*);$/) {
ns = $1
t = s.gsub(/^(.*)\b#{ns}::((?!Const)[A-Z])/) { |m|
before = $1
char = $2
if before =~ /"|\/\/|\\|using|SIGNAL|SLOT|Q_/
m
else
before + char
end
}
if t != s
puts file
File.open(file, 'w').write(t)
end
}
}
Change-Id: I919da493d0629b719d328e5e71c96a29d230dfd1
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
QFutureInterface acts by a shared pointer itself, so use that to
guards against the QFutureInterface object being destroyed while
the timer is running.
This feels awkward as QFutureInterfaceBase::future() is non-const
for unknown reason.
Change-Id: I1d43abe0c27183af2f01cf269e2a94d2fcaba46e
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
