We add a "targetDirectory" property to the file format and fill in the
deployment data.
(cherry picked from commit fba61c5b55)
Change-Id: If207cd5c77175c54cffdb5df92ea85c425cd3191
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
To be used for "special" build targets (Custom executables etc) that do not
depend on the project. This reduces user side boiler plate in a couple of
cases and is a bit clearer than the magic {QString()} result anyway.
Change-Id: I105b6ab952981143b2abf9b218fed30cee80b648
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This shifts the resposibility of creation/splitting of RunConfiguration
ids into what are essentially "type ids" and "build targets" to the base
implementation, possibly opening the path of abandoning the mangled ids
in favor of explicitly storing their constituent parts.
Take advantage of base id split in RunConfigurations for availableIds
/displayNameForId and for canCreate/canRestore/canClone.
Change-Id: I19fefb32757407ab5053a2ae0e5a79438659f6ec
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Filippo Cucchetto <filippocucchetto@gmail.com>
All RunConfiguration factories had some kind of canHandle(Target *)
implementation. Centralize this notion.
Change-Id: Ie24a355e857bddfd76b866859b8c7a42ffc83840
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The idea is to massage the setup in a way to make implementation
of new configurations less error prone by identifying recurring patterns
and sharing repetitive code that tends to be forgotten (see Android cloning).
The former two lines of constructors (owner-and-id, owner-and-source)
are split into a simple, shared, constructor and new setId() and
copyFrom() functions.
The change is mostly mechanical, some multiple calls to fromMap
have been removed, though, some consts added.
Otherwise, to keep the patch small it temporarily introduces two
helper templates in IRunConfigurationFactory. Also, setId() signatures
have not been unified yet. These won't be needed in the final setup.
Change-Id: I8c0734496caae744a9883fe6d92c1d8f8e0234ea
Reviewed-by: hjk <hjk@qt.io>
Sprinkle overrides over code derived from classes in ProjectExplorer
Change-Id: Ia4cc25649f7dc00b0ea126d8176a59afbc5ed574
Reviewed-by: hjk <hjk@theqtcompany.com>
Currently we pass in some places by value, elsewhere by const ref and
for some weird reason also by const value in a lot of places. The latter
is particularly annoying, as it is also used in interfaces and therefore
forces all implementors to do the same, since leaving the "const" off is
causing compiler warnings with MSVC.
Change-Id: I65b87dc3cce0986b8a55ff6119cb752361027803
Reviewed-by: hjk <hjk121@nokiamail.com>
Ran script to remove inludes on a trial-and-error basis and
manually corrected it.
Change-Id: I2d1d2ec5a3071de9d2a0a03bc69ec653becc7f85
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Detect the default import (QtQuick 1.x vs QtQuick 2.x) from main
file, and use it to restrict kits + select the right runtime.
Task-number: QTCREATORBUG-8358
Change-Id: Ib8cfd3eb989953f607fee6043c43e588f798c774
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
* Rename profiles to kits.
* Update some strings:
* projects mode has a Kits tab, not a Targets tab.
* " Settings" was dropped from the sub-tabs of the Kits tab
* menu entry "Build/Open Build/Run Target Selector" was renamed
to "Build/Open Build and Run Kits Selector".
* Use "Kit" instead of "Target" in miniprojecttargetselector.
(The class was not renamed as it does indeed select targets,
not kits)
Change-Id: I0727e086e2dfa0e8aaaf89fdc6f2e3596c7a4314
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
Provide both qmlviewer and qmlscene as run configurations if the active
Qt version is 5.0.0.
Change-Id: Iaff1361921bdd2d6b2256c4c4cb51e96802c2519
Reviewed-by: Aurindam Jana <aurindam.jana@nokia.com>
Introduce Profiles to store sets of values that describe a system/device.
These profiles are held by a target, getting rid of much of the information
stored in the Build-/Run-/DeployConfigurations, greatly simplifying those.
This is a squash of the wip/profile branch which has been on gerrit for a
while, rebased to current master.
Change-Id: I25956c8dd4d1962b2134bfaa8a8076ae3909460f
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Use Core::Id for all the project related objects in favor of plain
QStrings.
Change-Id: I790ab40cb29899efdb49c413a77609486f52e683
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
