Since we also license under GPL-3.0 WITH Qt-GPL-exception-1.0,
this applies only to a hypothetical newer version of GPL, that doesn't
exist yet. If such a version emerges, we can still decide to relicense...
While at it, replace (deprecated) GPL-3.0 with more explicit GPL-3.0-only
Change was done by running
find . -type f -exec perl -pi -e "s/LicenseRef-Qt-Commercial OR GPL-3.0\+ OR GPL-3.0 WITH Qt-GPL-exception-1.0/LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0/g" {} \;
Change-Id: I5097e6ce8d10233993ee30d7e25120e2659eb10b
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Task-number: QTBUG-67283
Change-Id: I708fd1f9f2b73d60f57cc3568646929117825813
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Only used for translations, and that can be achieved much cheaper
without the extra translation units created by moc.
This reduces the size of the autotoolsprojectmanagers/.obj build
dir from 23220 kB to 17696 kB for my debug buld.
Take the opportunity to sprinkle in a few 'final'.
Change-Id: I85b36c6b8ca58469d0906f1105b2b1587b7c7e6c
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Allows to use constants in fewer places, similar to what e.g.
RunConfiguration does.
Change-Id: I9d049128206c4acf0ce14b06b66d6c090a7c5242
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... and use the autotool configure step as guinea pig.
Change-Id: I0bbc9fee70b3c8626eb0dec0f728e8368f860484
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Originally, the build manager used to run all build steps in a dedicated
thread. Communication between the step and the manager happened via a
QFutureInterface that was passed into the step's run() function.
Later, new steps were added that operated asynchronously, so the build
manager had to differentiate between the different kinds of steps for
starting and stopping.
These days, almost all build and deploy steps work asynchronously, which
made the QFuture-based interface look increasingly odd.
With this patch, all build steps are expected to work asynchronously, so
the build manager no longer needs to differentiate. Steps are started
and requested to stop via the run() and cancel() functions,
respectively, and emit the finished() signal when they are done. Build
step implementors no longer have to deal with a QFutureInterface. For
steps whose implementation is inherently synchronous, the BuildStep base
class offers a runInThread() function.
Change-Id: If905c68b234c5a669f6e19f43142eaa57d594803
Reviewed-by: hjk <hjk@qt.io>
The extra parameter was always computed but used only in one place,
and that use got removed lately.
Change-Id: Ie10c0107ca70ee97ce03f83294992aab8d1a3ffe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Default to false, remove all no-op reimplementations.
And rename the getter to isImmutable according to the rules.
Change-Id: I8cce79d88fb59badfa1cffcf30a46f7ff3b09e8b
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Less code. And there's more room for consolidation.
Change-Id: Iccdaf5570155ec2783b7cf6528d3887f6efd5dbb
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
From a virtual function to a normal one backed by a real data member.
That's essentially what several re-implementations did, the other
ones used a fixed value instead.
Change-Id: I61e45f1d4f7f0f80fe2eb1f2729785f37e7bb803
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Use BuildStep::displayName() as default.
This probably could be the only possibility, but currently there
are some discrepancies that are kept in this patch to make
the patch mechanical.
Change-Id: I2a1e5c2ff37ad95e25309eb16e07099e42191f60
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
De-QObject-ify class, tr contexts are now the product's
context, which was the case in some BuildStepFactories already,
and is current state in {Run,DeployConfiguration}Factory.
One spurious object name removed.
De-virtualize canHandle(), it was never overloaded and is not
intended to be overloaded anymore.
Remove unused clone() function.
Change-Id: Iff7fba5f707505f868f94458084a18650535fa23
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This removes 900 lines of duplicated code, some duplicated checks at
runtime and some (minor) quadratic behavior when gathering display names.
canClone(), canRestore() and canCreate() and restore() use the same
pattern. Handle that on the core side once. Leave retore() virtual to let
the ios code unmodified (which is likely not needed, later...). Introduce
'Unclonable' and 'Uncreatable' flags to keep Android package installation
and WinRT deployment (non-)functionality unchanged.
Change-Id: I0325479aff818a4038b2f241ca733b8d8cd66f2f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Remove the finished() signal that is (sometimes) used to report that
a buildstep is done and use the FutureInterface for that purpose
consistently.
Change-Id: Ibe5520b562b91f1a7f4fc73ee898b33b930029ec
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
* Use pragma once
* Make sure overrides are everywhere
* Clean up code here and there
* Remove useless code from initializer lists
Change-Id: I9c285a803ea36cb32d14b3335757fd4b57f27d02
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Sprinkle overrides over code derived from classes in ProjectExplorer
Change-Id: Ia4cc25649f7dc00b0ea126d8176a59afbc5ed574
Reviewed-by: hjk <hjk@theqtcompany.com>
This information can be used to get information from earlier steps,
which e.g. queried for android devices to deploy to.
Change-Id: Iefe1c9443915cb6211f86f98ff7aaf3cb75145ba
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
configure is called using a relative path from buildDir
to the project directory and the configure command line
is updated to reflect changes to buildDir.
Change-Id: Ia9e8eef446efd21b6dcedef4668ff03adfd8a20c
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Currently we pass in some places by value, elsewhere by const ref and
for some weird reason also by const value in a lot of places. The latter
is particularly annoying, as it is also used in interfaces and therefore
forces all implementors to do the same, since leaving the "const" off is
causing compiler warnings with MSVC.
Change-Id: I65b87dc3cce0986b8a55ff6119cb752361027803
Reviewed-by: hjk <hjk121@nokiamail.com>
All of the steps are just using standard buildconfiguration methods.
Change-Id: Ibdef14e0e845e0bfc8828922a985070665e5f172
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
Introduce Profiles to store sets of values that describe a system/device.
These profiles are held by a target, getting rid of much of the information
stored in the Build-/Run-/DeployConfigurations, greatly simplifying those.
This is a squash of the wip/profile branch which has been on gerrit for a
while, rebased to current master.
Change-Id: I25956c8dd4d1962b2134bfaa8a8076ae3909460f
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Use Core::Id for all the project related objects in favor of plain
QStrings.
Change-Id: I790ab40cb29899efdb49c413a77609486f52e683
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
