The data is now pulled out of the runconfig directly instead of relying
on the indirection using the runconfig pointer inside RunControl.
This is only barely better, but gets rid of one direct user of
RunControl::runConfiguration().
Change-Id: If93576ba25ea9f3ddbeae2535217f5c2f361eaf6
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It's the same as FilePath::lastModified locally, and toFileInfo
doesn't work remotely. So it's overall at least not worse.
Change-Id: Ice8d80dcfd01dc38edc1dce2b53e1b5e6274380f
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The main QtcProcess interface is nowadays a CommandLine, with no
explicit references left to QtcProcess::Arguments and related static
helper functions, so it only clutters the QtcProcess class interface
So move these items out of QtcProcess, later potentially to a separate
file pair.
Change-Id: I45c300b656f5b30e2e2717232c855fdd97c2d1d7
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
And AttachCrashedExternal to AttachToCrashedProcess
And AttachCore to AttachToCore.
Clearer.
Change-Id: I47c2eca5cbdbbc0eb38b9f62b2504c96558ff112
Reviewed-by: David Schulz <david.schulz@qt.io>
Fix the following clang-tidy warning:
Call to virtual method 'IosRunner::stop' during destruction bypasses
virtual dispatch [clang-analyzer-optin.cplusplus.VirtualCall]
Remove the reimplementation of IosRunSupport::stop(), as it was
calling base implementation. Make base IosRunner::stop() a final
method.
Change-Id: I8e57a6dd6a44d2a6f00f5af96a11530f62c92429
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
For convenience, and use it in some places.
Change-Id: I8f7cb502b37b2fbf4cf2d17cac9c6299558332dc
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
We need to pass the path to the device symbols, that Xcode downloaded
for the device's OS version, as the sysroot to the debugger. Otherwise
debugger startup is very slow.
We already tried to do that, but it looks like, depending on the
devices, this path can contain an architecture specific part, e.g.
"iOS DeviceSupport/13.5.1 (17F80) arm64e" instead of just "iOS
DeviceSupport/13.5.1 (17F80)". It can still be just the latter, so we
get the devices architecture information, try the architecture specific
directory first, and fall back to the architecture agnostic name as
before if the former doesn't exist.
Fixes: QTCREATORBUG-21682
Change-Id: I2efdbfda0282f1cf0f8d10bd4e5217a298027fcf
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The coreplugin/id.h header is kept for downstream for now.
Change-Id: I8c44590f7b988b3770ecdc177c40783e12353e66
(cherry picked from commit 430a33dcd9)
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
The coreplugin/id.h header is kept for downstream for now.
Change-Id: I8c44590f7b988b3770ecdc177c40783e12353e66
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For Compile, BuildSystem and Deployment. Unclutters user code and reduces
binary size.
Change-Id: Ia18e917bb411754162e9f4ec6056d752a020bb50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This unifies the remaining paths of RunWorker creation to always
use RunWorkerFactories in the plugin pimpls.
There were, and are, still effectively three basic kinds of workers:
- "toplevel" tools corresponding to the run modes, that are often all
that's used for local runs and directly started via the fat buttons
or e.g. entries in the analyze menu, with factories already previously
located in the plugin pimpls
- core "tool helpers", providing tool specific functionality typically
used in conjunction with a remote device specific run mechanism,
set up via RunControl::registerWorkerCreator
- target/device specific runhelper like port gatherers contructed e.g.
via *Device::workerCreator(Core::Id id)
Worse, these categories are partially overlapping, so it was not
clear how a "clean" setup would look like, instead some ad-hoc cobbling
"to make it work" happened.
In some cases, the runMode id was used throughout the whole ensemble
of run workers for a given run, and which worker exactly was created
depended on which of the mechanism above was used in which order.
With the new central setup, the top-level runmodes remain, but the
second kind gets new ids, so the implicit dependencies on order
of setup mechanism are avoided.
This also helps in the cases where there was previously unclarity of where
and how to set up worker factories: It's always and only the plugin
pimpl now.
Change-Id: Icd9a08e2d53e19abe8b21fe546f469fae353a69f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This is what the consuming code expects in most cases.
Change-Id: I135592039e28b994996186f627215ab1d2f8d6dc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For a long time, probably from the very beginning, a RunControl
was meant to hold (a copy of) data needed for its operation, that was
valid at the time of its construction, to be resilient in cases
where RunConfiguration setting were changed while the RunControl
was running, or to properly re-run with the original settings.
Unfortunately, the task was repetitive, as RunConfiguration
classes had no generic access to properties / "aspects"
and there was was the runConfiguration() accessor (probably
for mostly unrelated reasons in the output pane handling) which
made the idea of just casting that to the original runConfiguration
and access the data directly there appealing, with all the
expected consequences.
This patch here partially addresses the issue by copying some
more of the related data at RunControl construction time and
adjust the using code, avoiding most uses of the runConfiguration()
accessor in a mostly mechanical matter.
Complete removal appears possible, but will be less mechanical
in "difficult" plugins like ios, so this is left for later.
The new accessors in RunControl are very much ad-hoc, leaving
room for improvement, e.g. by consolidating the access to the
run config settings aspects with the other runconfig aspects
or similar. For now the goal is to remove the runConfiguration()
accessor, and to as much as possible fixed data after RunControl
setup is finished.
Next step would be to officially allow construction of RunControls
without a specific RunConfiguration by setting the necessary
data independently, removing the need for the various workarounds
that are currently used for the purpose of faking (parts of) the
effect of the non-existing RunConfiguration or refusing to operate
at all, even if it would be possible.
Change-Id: If8e5596da8422c70e90f97270389adbe6d0b46f2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The name "KitInformation" does not properly convey the fact that it
represents a certain *aspect* of a kit. The same goes for
"KitConfigWidget", which in addition was inconsistent with
"KitInformation".
We now use "KitAspect" and "KitAspectWidget".
Change-Id: I9804ee4cedc4d61fad533ea1dd4e4720e67fde97
Reviewed-by: hjk <hjk@qt.io>
Using aspects is the standard pattern nowadays, there's nothing 'extra'
to them anymore.
Change-Id: I446f9d7b1db58a4899e5e44df33ce51f655e7be4
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
To remove the last user of IRCAspect::runConfiguration.
Change-Id: I1390166730112008a4050877f96bb29f274e7ef1
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
It has been an obsolete alias for setId for a while and downstream
uses have been adapted.
Change-Id: I467370aa67054599c7771e8275d28e62ddc461fa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
As all Runnables are known to be StandardRunnables, this here
essentially replaces all .is<StandardRunnable> by 'true'.
.as<StandardRunnable> by no-op, and fixes the fallout.
Change-Id: I1632f8e164fa0a9dff063df47a9e191fdf7bbb2e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This also treats the arguments list as an arguments list for running,
not as a single argument.
Change-Id: Ia95e02c6324947081147b8bf8084cdd3a7d1eaf0
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Host and port reasonably belong together, using a QUrl makes that more
explicit and follows the lead of the Qml profiler in that area.
Change-Id: I754cb17d165ce6b2f25c655eeebfd8ac8f5a93c7
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
There will be stopDependencies, too, which apply when stopping the
runcontrol.
Change-Id: Id72771d28cbb6b254572c9f93db93e0d054b890f
Reviewed-by: hjk <hjk@qt.io>
It turns out that one "Connection" per RunControl doesn't map
well to the uses we have. Instead, RunWorkers need to know
individually how to connect to the place where they can work,
but they are already specific enough to be able to use a
standard class (like QUrl) as their way to specify the needed
entry point.
In theory one could see a RunControl's connection as an
aggregation of its workers connection bits, but that does
not really seem to be needed in code.
As consequence, replace UrlConnection by a plain QUrl, and also
the HostName connection by a QUrl with hostName set.
Change-Id: I40c97e37779314ac0a77041e864a18eadb78f987
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Not needed anymore in the world of RunWorkers.
Change-Id: Id7fb24fece6acb03de12f2677dd99a05c513e7a4
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
... and QmlProfilerRunner::Configuaration by PE::UrlConnection,
and call it 'serverUrl' on the user side.
That's the only variant we ever had and avoids "translations"
between three structures that are essential the same.
Change-Id: I33386b2b8d2a7985ff934f6f8f840de0831bf9c1
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This moves all of the RunControl implementation into a single
RunWorker, not yet splitting it up into separate RunWorkers
which is the final goal of this series.
Done-with: Vikas Pachdha
Change-Id: I9deaef48735c1c63c41dfae39d67f59387295273
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
