fix TI-RTOS makefiles to build wolfSSL from local dir

Signed-off-by: Vikram Adiga <vikram.adiga@ti.com>

tirtos/include.am

@@ -6,6 +6,7 @@ EXTRA_DIST += \
          tirtos/README \
          tirtos/wolfssl.bld \
          tirtos/wolfssl.mak \
+         tirtos/products.mak \
          tirtos/packages/ti/net/wolfssl/package.bld \
          tirtos/packages/ti/net/wolfssl/package.xdc \
          tirtos/packages/ti/net/wolfssl/package.xs \

tirtos/products.mak

@@ -0,0 +1,30 @@
+#
+#  ======== products.mak ========
+#
+#
+# Read the http://processors.wiki.ti.com/index.php/Using_wolfSSL_with_TI-RTOS
+# for instructions to download the software required.
+
+# XDC_INSTALL_DIR is the path to XDCtools directory.
+XDC_INSTALL_DIR        =
+
+# BIOS_INSTALL_DIR is the path to TI-RTOS Kernel (SYS/BIOS) directory. If you
+# have installed TI-RTOS, it is located in the products/bios_* path.
+BIOS_INSTALL_DIR       =
+
+# NDK_INSTALL_DIR is the path to TI-RTOS NDK directory. If you have
+# installed TI-RTOS, it is located in the products/ndk_* path.
+NDK_INSTALL_DIR        =
+
+# TIVAWARE_INSTALL_DIR is the path to Tivaware driverlib directory. If you have
+# installed TI-RTOS, it is located in the products/TivaWare_* path.
+TIVAWARE_INSTALL_DIR   =
+
+# Define the code generation tools path for TI, IAR and GCC ARM compilers.
+# If you have installed Code Composer Studio, the TI and GCC compiler are
+# located in the ccsv*/tools/compiler/* path.
+#
+# Leave assignment empty to disable any toolchain.
+ti.targets.arm.elf.M4F =
+iar.targets.arm.M4F    =
+gnu.targets.arm.M4F    =

tirtos/wolfssl.bld

@@ -34,7 +34,7 @@
 var armOpts = " -ms ";
 var gnuOpts = " -D_POSIX_SOURCE ";
 var iarOpts = " --diag_suppress=Pa134 ";
-var TivaWareDir = "";
+var ndkDir = "";
 
 /* Uncomment the following lines to build libraries for debug mode: */
 // Pkg.attrs.profile = "debug";
@@ -57,7 +57,7 @@ var ccOpts = {
 for (arg = 0; arg < arguments.length; arg++) {
     /*
      * Get the compiler's installation directory.
-     * For "ti.targets.arm.elf.M4F=/vendors/arm/6.1.0", 
+     * For "ti.targets.arm.elf.M4F=/vendors/arm/6.1.0",
      * we get "/vendors/arm/6.1.0"
      */
     var targetName = arguments[arg].split("=")[0];
@@ -68,8 +68,8 @@ for (arg = 0; arg < arguments.length; arg++) {
         continue;
     }
 
-    if (targetName.match(/^TIVAWARE/) ) {
+    if (targetName.match(/^NDK/) ) {
-        TivaWareDir = rootDir;
+        ndkDir = rootDir;
         continue;
     }
 
@@ -81,9 +81,9 @@ for (arg = 0; arg < arguments.length; arg++) {
 }
 
 /* Include Path (needed to find NDK headers) */
-var ndkPath = "$(NDK_INSTALL_DIR)/packages/ti/ndk/";
+var wolfsslPathInclude = " -I" + ndkDir + "/packages/ti/ndk/inc/bsd "
-var wolfsslPathInclude = " -I" + ndkPath + "/inc/bsd -DWOLFSSL_TIRTOS ";
+        + "-DWOLFSSL_TIRTOS ";
 
 /* lib/ is a generated directory that 'xdc clean' should remove */
-var Pkg = xdc.useModule('xdc.bld.PackageContents'); 
+var Pkg = xdc.useModule('xdc.bld.PackageContents');
 Pkg.generatedFiles.$add("lib/");

tirtos/wolfssl.mak

@@ -1,27 +1,17 @@
 #
 #  ======== wolfssl.mak ========
 #
+include ./products.mak
 
-# USER OPTIONAL STEP: These variables are set when building wolfssl
+# Enable older TI-RTOS 2.14-based variables
-# through the tirtos.mak
+ifeq ($(BIOS_INSTALL_DIR),)
-# Set up dependencies
+    BIOS_INSTALL_DIR=$(SYSBIOS_INSTALL_DIR)
-XDC_INSTALL_DIR ?= C:/ti/xdctools_3_24_02_30
+endif
-SYSBIOS_INSTALL_DIR ?= C:/ti/bios_6_34_01_14
+ifeq ($(TIVAWARE_INSTALL_DIR),)
-NDK_INSTALL_DIR ?= C:/ti/ndk_2_24_00_02
+    TIVAWARE_INSTALL_DIR=$(TIVAWARE)
-TIRTOS_INSTALLATION_DIR ?= C:/ti/tirtos_tivac_2_00_00_22
+endif
-TIVAWARE ?= C:/ti/tivaware
-WOLFSSL_INSTALL_DIR ?= C:/wolfssl/wolfssl-2.9.4
 
-#
+WOLFSSL_INSTALL_DIR=$(CURDIR)/../
-# Set location of various cgtools
-# These variables can be set here or on the command line. These
-# variables are set when building wolfssl through tirtos.mak
-# USER OPTIONAL STEP: user can define below paths to compilers
-ti.targets.arm.elf.M4F ?=
-
-gnu.targets.arm.M4F ?=
-
-iar.targets.arm.M4F ?=
 
 #
 # Set XDCARGS to some of the variables above.  XDCARGS are passed
@@ -40,12 +30,12 @@ XDCARGS= \
     ti.targets.arm.elf.M4F=\"$(ti.targets.arm.elf.M4F)\" \
     gnu.targets.arm.M4F=\"$(gnu.targets.arm.M4F)\" \
     iar.targets.arm.M4F=\"$(iar.targets.arm.M4F)\" \
-    TIVAWARE=\"$(TIVAWARE)\"
+    NDK=\"$(NDK_INSTALL_DIR)\"
 
 #
 # Set XDCPATH to contain necessary repositories.
 #
-XDCPATH = $(SYSBIOS_INSTALL_DIR)/packages;$(NDK_INSTALL_DIR)/packages;$(WOLFSSL_INSTALL_DIR);$(TIRTOS_INSTALLATION_DIR)/packages;$(TIVAWARE);
+XDCPATH = $(BIOS_INSTALL_DIR)/packages;$(NDK_INSTALL_DIR)/packages;$(WOLFSSL_INSTALL_DIR);$(TIVAWARE_INSTALL_DIR)
 export XDCPATH
 
 #