feedc0de/wolfssl
1
0
Fork 0
forked from wolfSSL/wolfssl
Code Pull Requests Activity

Update README.md

Browse Source
This commit is contained in:
Leah
2015-09-29 12:53:10 -06:00
parent 389bbc94eb
commit 914ed31ff2
1 changed files with 2 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
IDE/WORKBENCH/README.md
View File

@ -50,14 +50,12 @@ You will need the following files to replicate this build:
* usrRtpAppInit.c (should be created when you create a new VxWorks image) * usrRtpAppInit.c (should be created when you create a new VxWorks image)
Leave unchanged Leave unchanged
* This project was tested with a pre-built image in the VxWorks distribution * This project was tested with a pre-built image in the VxWorks distribution
called vsb\_vxsim\_linux. <BEGIN> $(VSB\_DIR) line in the .wpj file may need to be called vsb\_vxsim\_linux. \<BEGIN\> \$(VSB\_DIR) line in the .wpj file may need to be
changed according to the VxWorks package being used. changed according to the VxWorks package being used.
###VXWORKS SIMULATOR: ###VXWORKS SIMULATOR:
In "Open Connection Details" under VxWorks Simulator which is in the connections In "Open Connection Details" under VxWorks Simulator which is in the connections
dropdown. Choose IDE/WORKBENCH/wolfssl-vxworks-image/default/vxWorks as the dropdown. After the project has been build, choose the corresponding kernel image, typically called project/default/VxWorks. Select simnetd from the dropdown and enter 192.168.200.1 as the IP address.
kernel image after building the project. Select simnetd from the dropdown and
enter 192.168.200.1 as the IP address.
To connect to a server running on the VxWorks Simulator, enter these commands To connect to a server running on the VxWorks Simulator, enter these commands
into the host terminal (for Ubuntu 14.04): into the host terminal (for Ubuntu 14.04):