{
  "config": {
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
    },
    "error": {
      "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]"
    },
    "flow_title": "{ip}",
    "step": {
      "user": {
        "data": {
          "ip_address": "Hostname or IP address",
          "password": "[%key:common::config_flow::data::password%]",
          "port": "[%key:common::config_flow::data::port%]"
        },
        "title": "Fill in your information"
      }
    }
  },
  "entity": {
    "binary_sensor": {
      "flow_sensor": {
        "name": "Flow sensor"
      },
      "freeze": {
        "name": "Freeze restrictions"
      },
      "hourly": {
        "name": "Hourly restrictions"
      },
      "month": {
        "name": "Month restrictions"
      },
      "raindelay": {
        "name": "Rain delay restrictions"
      },
      "rainsensor": {
        "name": "Rain sensor restrictions"
      },
      "weekday": {
        "name": "Weekday restrictions"
      }
    },
    "select": {
      "freeze_protection_temperature": {
        "name": "Freeze protection temperature"
      }
    },
    "sensor": {
      "flow_sensor_clicks_cubic_meter": {
        "name": "Flow sensor clicks per cubic meter"
      },
      "flow_sensor_consumed_liters": {
        "name": "Flow sensor consumed liters"
      },
      "flow_sensor_leak_clicks": {
        "name": "Flow sensor leak clicks"
      },
      "flow_sensor_leak_volume": {
        "name": "Flow sensor leak volume"
      },
      "flow_sensor_start_index": {
        "name": "Flow sensor start index"
      },
      "flow_sensor_watering_clicks": {
        "name": "Flow sensor clicks"
      },
      "last_leak_detected": {
        "name": "Last leak detected"
      },
      "rain_sensor_rain_start": {
        "name": "Rain sensor rain start"
      }
    },
    "switch": {
      "freeze_protect_enabled": {
        "name": "Freeze protection"
      },
      "hot_days_extra_watering": {
        "name": "Extra water on hot days"
      }
    }
  },
  "options": {
    "step": {
      "init": {
        "data": {
          "allow_inactive_zones_to_run": "Allow disabled zones to be run manually",
          "use_app_run_times": "Use zone run times from the RainMachine app",
          "zone_run_time": "Default zone run time (in seconds)"
        },
        "title": "Configure RainMachine"
      }
    }
  },
  "services": {
    "pause_watering": {
      "description": "Pauses all watering activities for a number of seconds.",
      "fields": {
        "device_id": {
          "description": "The controller whose watering activities should be paused.",
          "name": "Controller"
        },
        "seconds": {
          "description": "The amount of time (in seconds) to pause watering.",
          "name": "Duration"
        }
      },
      "name": "Pause all watering"
    },
    "push_flow_meter_data": {
      "description": "Sends flow meter data from Home Assistant to the RainMachine device.",
      "fields": {
        "device_id": {
          "description": "The controller to send flow meter data to.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        },
        "unit_of_measurement": {
          "description": "The flow meter units to send.",
          "name": "Unit of measurement"
        },
        "value": {
          "description": "The flow meter value to send.",
          "name": "Value"
        }
      },
      "name": "Push flow meter data"
    },
    "push_weather_data": {
      "description": "Sends weather data from Home Assistant to the RainMachine device.\nLocal Weather Push service should be enabled from Settings > Weather > Developer tab for RainMachine to consider the values being sent. Units must be sent in metric; no conversions are performed by the integration.\nSee details of RainMachine API here: {api_url}",
      "fields": {
        "condition": {
          "description": "Current weather condition code (WNUM).",
          "name": "Weather condition code"
        },
        "device_id": {
          "description": "The controller for the weather data to be pushed.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        },
        "dewpoint": {
          "description": "Current dew point (°C).",
          "name": "Dew point"
        },
        "et": {
          "description": "Evapotranspiration (mm).",
          "name": "Evapotranspiration"
        },
        "maxrh": {
          "description": "Maximum relative humidity in current period (%RH).",
          "name": "Max relative humidity"
        },
        "maxtemp": {
          "description": "Maximum temperature in current period (°C).",
          "name": "Max temperature"
        },
        "minrh": {
          "description": "Minimum relative humidity in current period (%RH).",
          "name": "Min relative humidity"
        },
        "mintemp": {
          "description": "Minimum temperature in current period (°C).",
          "name": "Min temperature"
        },
        "pressure": {
          "description": "Current barometric pressure (kPa).",
          "name": "Barometric pressure"
        },
        "qpf": {
          "description": "Quantitative Precipitation Forecast (mm), or QPF. Note: QPF values shouldn't be send as cumulative values but the measured/forecasted values for each hour or day. The RainMachine Mixer will sum all QPF values in the current day to have the day total QPF.",
          "name": "Quantitative Precipitation Forecast"
        },
        "rain": {
          "description": "Measured rainfail (mm). Note: RAIN values shouldn't be send as cumulative values but the measured/forecasted values for each hour or day. The RainMachine Mixer will sum all RAIN values in the current day to have the day total RAIN.",
          "name": "Measured rainfall"
        },
        "solarrad": {
          "description": "Current solar radiation (MJ/m²/h).",
          "name": "Solar radiation"
        },
        "temperature": {
          "description": "Current temperature (°C).",
          "name": "Temperature"
        },
        "timestamp": {
          "description": "UNIX timestamp for the weather data. If omitted, the RainMachine device's local time at the time of the call is used.",
          "name": "Timestamp"
        },
        "wind": {
          "description": "Current wind speed (m/s).",
          "name": "Wind speed"
        }
      },
      "name": "Push weather data"
    },
    "restrict_watering": {
      "description": "Restricts all watering activities from starting for a time period.",
      "fields": {
        "device_id": {
          "description": "The controller whose watering activities should be restricted.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        },
        "duration": {
          "description": "The time period to restrict watering activities from starting.",
          "name": "Duration"
        }
      },
      "name": "Restrict all watering"
    },
    "start_program": {
      "description": "Starts a program.",
      "name": "Start program"
    },
    "start_zone": {
      "description": "Starts a zone.",
      "fields": {
        "zone_run_time": {
          "description": "The amount of time (in seconds) to run the zone.",
          "name": "Run time"
        }
      },
      "name": "Start zone"
    },
    "stop_all": {
      "description": "Stops all watering activities.",
      "fields": {
        "device_id": {
          "description": "The controller whose watering activities should be stopped.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        }
      },
      "name": "Stop all watering"
    },
    "stop_program": {
      "description": "Stops a program.",
      "name": "Stop program"
    },
    "stop_zone": {
      "description": "Stops a zone.",
      "name": "Stop zone"
    },
    "unpause_watering": {
      "description": "Resumes all paused watering activities.",
      "fields": {
        "device_id": {
          "description": "The controller whose watering activities should be unpaused.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        }
      },
      "name": "Unpause all watering"
    },
    "unrestrict_watering": {
      "description": "Removes all watering restrictions.",
      "fields": {
        "device_id": {
          "description": "The controller whose watering activities should be unrestricted.",
          "name": "[%key:component::rainmachine::services::pause_watering::fields::device_id::name%]"
        }
      },
      "name": "Unrestrict all watering"
    }
  }
}