diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.cpp b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.cpp
index 81399f3..7573756 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.cpp
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.cpp
@@ -2,272 +2,272 @@
 
 arduino::MbedUDP::MbedUDP()
 {
-	_packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
-	_current_packet = NULL;
-	_current_packet_size = 0;
-	// if this allocation fails then ::begin will fail
+  _packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
+  _current_packet = NULL;
+  _current_packet_size = 0;
+  // if this allocation fails then ::begin will fail
 }
 
 arduino::MbedUDP::~MbedUDP()
 {
-	delete[] _packet_buffer;
+  delete[] _packet_buffer;
 }
 
 uint8_t arduino::MbedUDP::begin(uint16_t port)
 {
-	// success = 1, fail = 0
+  // success = 1, fail = 0
 
-	nsapi_error_t rt = _socket.open(getNetwork());
+  nsapi_error_t rt = _socket.open(getNetwork());
 
-	if (rt != NSAPI_ERROR_OK)
-	{
-		return 0;
-	}
+  if (rt != NSAPI_ERROR_OK)
+  {
+    return 0;
+  }
 
-	if (_socket.bind(port) < 0)
-	{
-		return 0;  //Failed to bind UDP Socket to port
-	}
+  if (_socket.bind(port) < 0)
+  {
+    return 0;  //Failed to bind UDP Socket to port
+  }
 
-	if (!_packet_buffer)
-	{
-		return 0;
-	}
+  if (!_packet_buffer)
+  {
+    return 0;
+  }
 
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	return 1;
+  return 1;
 }
 
 uint8_t arduino::MbedUDP::beginMulticast(IPAddress ip, uint16_t port)
 {
-	// success = 1, fail = 0
-	if (begin(port) != 1)
-	{
-		return 0;
-	}
+  // success = 1, fail = 0
+  if (begin(port) != 1)
+  {
+    return 0;
+  }
 
-	SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
 
-	if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
-	{
-		printf("Error joining the multicast group\n");
-		return 0;
-	}
+  if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
+  {
+    printf("Error joining the multicast group\n");
+    return 0;
+  }
 
-	return 1;
+  return 1;
 }
 
 void arduino::MbedUDP::stop()
 {
-	_socket.close();
+  _socket.close();
 }
 
 int arduino::MbedUDP::beginPacket(IPAddress ip, uint16_t port)
 {
-	_host = SocketHelpers::socketAddressFromIpAddress(ip, port);
-	//If IP is null and port is 0 the initialization failed
-	txBuffer.clear();
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  //If IP is null and port is 0 the initialization failed
+  txBuffer.clear();
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::beginPacket(const char *host, uint16_t port)
 {
-	_host = SocketAddress(host, port);
-	txBuffer.clear();
-	getNetwork()->gethostbyname(host, &_host);
-	//If IP is null and port is 0 the initialization failed
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketAddress(host, port);
+  txBuffer.clear();
+  getNetwork()->gethostbyname(host, &_host);
+  //If IP is null and port is 0 the initialization failed
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::endPacket()
 {
-	_socket.set_blocking(true);
-	_socket.set_timeout(1000);
+  _socket.set_blocking(true);
+  _socket.set_timeout(1000);
 
-	size_t size = txBuffer.available();
-	uint8_t buffer[size];
+  size_t size = txBuffer.available();
+  uint8_t buffer[size];
 
-	for (int i = 0; i < size; i++)
-	{
-		buffer[i] = txBuffer.read_char();
-	}
+  for (int i = 0; i < size; i++)
+  {
+    buffer[i] = txBuffer.read_char();
+  }
 
-	nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	if (ret < 0)
-	{
-		return 0;
-	}
+  if (ret < 0)
+  {
+    return 0;
+  }
 
-	return size;
+  return size;
 }
 
 // Write a single byte into the packet
 size_t arduino::MbedUDP::write(uint8_t byte)
 {
-	return write(&byte, 1);
+  return write(&byte, 1);
 }
 
 // Write size bytes from buffer into the packet
 size_t arduino::MbedUDP::write(const uint8_t *buffer, size_t size)
 {
-	for (int i = 0; i < size; i++)
-	{
-		if (txBuffer.availableForStore())
-		{
-			txBuffer.store_char(buffer[i]);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  for (int i = 0; i < size; i++)
+  {
+    if (txBuffer.availableForStore())
+    {
+      txBuffer.store_char(buffer[i]);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	return size;
+  return size;
 }
 
 int arduino::MbedUDP::parsePacket()
 {
-	nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
+  nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
 
-	if (ret == NSAPI_ERROR_WOULD_BLOCK)
-	{
-		// no data
-		return 0;
-	}
-	else if (ret == NSAPI_ERROR_NO_SOCKET)
-	{
-		// socket was not created correctly.
-		return -1;
-	}
-	// error codes below zero are errors
-	else if (ret <= 0)
-	{
-		// something else went wrong, need some tracing info...
-		return -1;
-	}
+  if (ret == NSAPI_ERROR_WOULD_BLOCK)
+  {
+    // no data
+    return 0;
+  }
+  else if (ret == NSAPI_ERROR_NO_SOCKET)
+  {
+    // socket was not created correctly.
+    return -1;
+  }
+  // error codes below zero are errors
+  else if (ret <= 0)
+  {
+    // something else went wrong, need some tracing info...
+    return -1;
+  }
 
-	// set current packet states
-	_current_packet = _packet_buffer;
-	_current_packet_size = ret;
+  // set current packet states
+  _current_packet = _packet_buffer;
+  _current_packet_size = ret;
 
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 int arduino::MbedUDP::available()
 {
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 // Read a single byte from the current packet
 int arduino::MbedUDP::read()
 {
-	// no current packet...
-	if (_current_packet == NULL)
-	{
-		// try reading the next frame, if there is no data return
-		if (parsePacket() == 0)
-			return -1;
-	}
+  // no current packet...
+  if (_current_packet == NULL)
+  {
+    // try reading the next frame, if there is no data return
+    if (parsePacket() == 0)
+      return -1;
+  }
 
-	_current_packet++;
+  _current_packet++;
 
-	// check for overflow
-	if (_current_packet > _packet_buffer + _current_packet_size)
-	{
-		// try reading the next packet...
-		if (parsePacket() > 0)
-		{
-			// if so, read first byte of next packet;
-			return read();
-		}
-		else
-		{
-			// no new data... not sure what to return here now
-			return -1;
-		}
-	}
+  // check for overflow
+  if (_current_packet > _packet_buffer + _current_packet_size)
+  {
+    // try reading the next packet...
+    if (parsePacket() > 0)
+    {
+      // if so, read first byte of next packet;
+      return read();
+    }
+    else
+    {
+      // no new data... not sure what to return here now
+      return -1;
+    }
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
 
 // Read up to len bytes from the current packet and place them into buffer
 // Returns the number of bytes read, or 0 if none are available
 int arduino::MbedUDP::read(unsigned char *buffer, size_t len)
 {
-	// Q: does Arduino read() function handle fragmentation? I won't for now...
-	if (_current_packet == NULL)
-	{
-		if (parsePacket() == 0)
-			return 0;
-	}
+  // Q: does Arduino read() function handle fragmentation? I won't for now...
+  if (_current_packet == NULL)
+  {
+    if (parsePacket() == 0)
+      return 0;
+  }
 
-	// how much data do we have in the current packet?
-	int offset = _current_packet - _packet_buffer;
+  // how much data do we have in the current packet?
+  int offset = _current_packet - _packet_buffer;
 
-	if (offset < 0)
-	{
-		return 0;
-	}
+  if (offset < 0)
+  {
+    return 0;
+  }
 
-	int max_bytes = _current_packet_size - offset;
+  int max_bytes = _current_packet_size - offset;
 
-	if (max_bytes < 0)
-	{
-		return 0;
-	}
+  if (max_bytes < 0)
+  {
+    return 0;
+  }
 
-	// at the end of the packet?
-	if (max_bytes == 0)
-	{
-		// try read next packet...
-		if (parsePacket() > 0)
-		{
-			return read(buffer, len);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  // at the end of the packet?
+  if (max_bytes == 0)
+  {
+    // try read next packet...
+    if (parsePacket() > 0)
+    {
+      return read(buffer, len);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	if (len > (size_t)max_bytes)
-		len = max_bytes;
+  if (len > (size_t)max_bytes)
+    len = max_bytes;
 
-	// copy to target buffer
-	memcpy(buffer, _current_packet, len);
+  // copy to target buffer
+  memcpy(buffer, _current_packet, len);
 
-	_current_packet += len;
+  _current_packet += len;
 
-	return len;
+  return len;
 }
 
 IPAddress arduino::MbedUDP::remoteIP()
 {
-	nsapi_addr_t address = _remoteHost.get_addr();
-	return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
+  nsapi_addr_t address = _remoteHost.get_addr();
+  return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
 }
 
 uint16_t arduino::MbedUDP::remotePort()
 {
-	return _remoteHost.get_port();
+  return _remoteHost.get_port();
 }
 
 void arduino::MbedUDP::flush()
 {
-	// TODO: a real check to ensure transmission has been completed
+  // TODO: a real check to ensure transmission has been completed
 }
 
 int arduino::MbedUDP::peek()
 {
-	if (_current_packet_size < 1)
-	{
-		return -1;
-	}
+  if (_current_packet_size < 1)
+  {
+    return -1;
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.h
index cc28266..94ca2ec 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/libraries/SocketWrapper/src/MbedUdp.h
@@ -25,7 +25,7 @@
 #include "netsocket/UDPSocket.h"
 
 #ifndef WIFI_UDP_BUFFER_SIZE
-	#define WIFI_UDP_BUFFER_SIZE 508
+  #define WIFI_UDP_BUFFER_SIZE 508
 #endif
 
 namespace arduino
@@ -33,74 +33,76 @@ namespace arduino
 
 class MbedUDP : public UDP
 {
-	private:
-		UDPSocket _socket;          // Mbed OS socket
-		SocketAddress _host;        // Host to be used to send data
-		SocketAddress _remoteHost;  // Remote host that sent incoming packets
+  private:
+    UDPSocket _socket;          // Mbed OS socket
+    SocketAddress _host;        // Host to be used to send data
+    SocketAddress _remoteHost;  // Remote host that sent incoming packets
 
-		uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
+    uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
 
-		// The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
-		// these two variables are used to cache the state of the current packet
-		uint8_t* _current_packet;
-		size_t _current_packet_size;
+    // The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
+    // these two variables are used to cache the state of the current packet
+    uint8_t* _current_packet;
+    size_t _current_packet_size;
 
-		RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
+    RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
 
-	protected:
-		virtual NetworkInterface* getNetwork() = 0;
+  protected:
+    virtual NetworkInterface* getNetwork() = 0;
 
-	public:
-		MbedUDP();  // Constructor
-		~MbedUDP();
-		virtual uint8_t begin(uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual uint8_t beginMulticast(IPAddress, uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual void stop();                                  // Finish with the UDP socket
+  public:
+    MbedUDP();  // Constructor
+    ~MbedUDP();
+    virtual uint8_t begin(
+      uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual uint8_t beginMulticast(IPAddress,
+                                   uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual void stop();                                  // Finish with the UDP socket
 
-		// Sending UDP packets
+    // Sending UDP packets
 
-		// Start building up a packet to send to the remote host specific in ip and port
-		// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
-		virtual int beginPacket(IPAddress ip, uint16_t port);
-		// Start building up a packet to send to the remote host specific in host and port
-		// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
-		virtual int beginPacket(const char* host, uint16_t port);
-		// Finish off this packet and send it
-		// Returns 1 if the packet was sent successfully, 0 if there was an error
-		virtual int endPacket();
-		// Write a single byte into the packet
-		virtual size_t write(uint8_t);
-		// Write size bytes from buffer into the packet
-		virtual size_t write(const uint8_t* buffer, size_t size);
+    // Start building up a packet to send to the remote host specific in ip and port
+    // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+    virtual int beginPacket(IPAddress ip, uint16_t port);
+    // Start building up a packet to send to the remote host specific in host and port
+    // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+    virtual int beginPacket(const char* host, uint16_t port);
+    // Finish off this packet and send it
+    // Returns 1 if the packet was sent successfully, 0 if there was an error
+    virtual int endPacket();
+    // Write a single byte into the packet
+    virtual size_t write(uint8_t);
+    // Write size bytes from buffer into the packet
+    virtual size_t write(const uint8_t* buffer, size_t size);
 
-		using Print::write;
+    using Print::write;
 
-		// Start processing the next available incoming packet
-		// Returns the size of the packet in bytes, or 0 if no packets are available
-		virtual int parsePacket();
-		// Number of bytes remaining in the current packet
-		virtual int available();
-		// Read a single byte from the current packet
-		virtual int read();
-		// Read up to len bytes from the current packet and place them into buffer
-		// Returns the number of bytes read, or 0 if none are available
-		virtual int read(unsigned char* buffer, size_t len);
-		// Read up to len characters from the current packet and place them into buffer
-		// Returns the number of characters read, or 0 if none are available
-		virtual int read(char* buffer, size_t len)
-		{
-			return read((unsigned char*)buffer, len);
-		};
-		// Return the next byte from the current packet without moving on to the next byte
-		virtual int peek();
-		virtual void flush();  // Finish reading the current packet
+    // Start processing the next available incoming packet
+    // Returns the size of the packet in bytes, or 0 if no packets are available
+    virtual int parsePacket();
+    // Number of bytes remaining in the current packet
+    virtual int available();
+    // Read a single byte from the current packet
+    virtual int read();
+    // Read up to len bytes from the current packet and place them into buffer
+    // Returns the number of bytes read, or 0 if none are available
+    virtual int read(unsigned char* buffer, size_t len);
+    // Read up to len characters from the current packet and place them into buffer
+    // Returns the number of characters read, or 0 if none are available
+    virtual int read(char* buffer, size_t len)
+    {
+      return read((unsigned char*)buffer, len);
+    };
+    // Return the next byte from the current packet without moving on to the next byte
+    virtual int peek();
+    virtual void flush();  // Finish reading the current packet
 
-		// Return the IP address of the host who sent the current incoming packet
-		virtual IPAddress remoteIP();
-		// // Return the port of the host who sent the current incoming packet
-		virtual uint16_t remotePort();
+    // Return the IP address of the host who sent the current incoming packet
+    virtual IPAddress remoteIP();
+    // // Return the port of the host who sent the current incoming packet
+    virtual uint16_t remotePort();
 
-		friend class MbedSocketClass;
+    friend class MbedSocketClass;
 };
 
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.cpp b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.cpp
index 81399f3..7573756 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.cpp
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.cpp
@@ -2,272 +2,272 @@
 
 arduino::MbedUDP::MbedUDP()
 {
-	_packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
-	_current_packet = NULL;
-	_current_packet_size = 0;
-	// if this allocation fails then ::begin will fail
+  _packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
+  _current_packet = NULL;
+  _current_packet_size = 0;
+  // if this allocation fails then ::begin will fail
 }
 
 arduino::MbedUDP::~MbedUDP()
 {
-	delete[] _packet_buffer;
+  delete[] _packet_buffer;
 }
 
 uint8_t arduino::MbedUDP::begin(uint16_t port)
 {
-	// success = 1, fail = 0
+  // success = 1, fail = 0
 
-	nsapi_error_t rt = _socket.open(getNetwork());
+  nsapi_error_t rt = _socket.open(getNetwork());
 
-	if (rt != NSAPI_ERROR_OK)
-	{
-		return 0;
-	}
+  if (rt != NSAPI_ERROR_OK)
+  {
+    return 0;
+  }
 
-	if (_socket.bind(port) < 0)
-	{
-		return 0;  //Failed to bind UDP Socket to port
-	}
+  if (_socket.bind(port) < 0)
+  {
+    return 0;  //Failed to bind UDP Socket to port
+  }
 
-	if (!_packet_buffer)
-	{
-		return 0;
-	}
+  if (!_packet_buffer)
+  {
+    return 0;
+  }
 
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	return 1;
+  return 1;
 }
 
 uint8_t arduino::MbedUDP::beginMulticast(IPAddress ip, uint16_t port)
 {
-	// success = 1, fail = 0
-	if (begin(port) != 1)
-	{
-		return 0;
-	}
+  // success = 1, fail = 0
+  if (begin(port) != 1)
+  {
+    return 0;
+  }
 
-	SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
 
-	if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
-	{
-		printf("Error joining the multicast group\n");
-		return 0;
-	}
+  if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
+  {
+    printf("Error joining the multicast group\n");
+    return 0;
+  }
 
-	return 1;
+  return 1;
 }
 
 void arduino::MbedUDP::stop()
 {
-	_socket.close();
+  _socket.close();
 }
 
 int arduino::MbedUDP::beginPacket(IPAddress ip, uint16_t port)
 {
-	_host = SocketHelpers::socketAddressFromIpAddress(ip, port);
-	//If IP is null and port is 0 the initialization failed
-	txBuffer.clear();
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  //If IP is null and port is 0 the initialization failed
+  txBuffer.clear();
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::beginPacket(const char *host, uint16_t port)
 {
-	_host = SocketAddress(host, port);
-	txBuffer.clear();
-	getNetwork()->gethostbyname(host, &_host);
-	//If IP is null and port is 0 the initialization failed
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketAddress(host, port);
+  txBuffer.clear();
+  getNetwork()->gethostbyname(host, &_host);
+  //If IP is null and port is 0 the initialization failed
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::endPacket()
 {
-	_socket.set_blocking(true);
-	_socket.set_timeout(1000);
+  _socket.set_blocking(true);
+  _socket.set_timeout(1000);
 
-	size_t size = txBuffer.available();
-	uint8_t buffer[size];
+  size_t size = txBuffer.available();
+  uint8_t buffer[size];
 
-	for (int i = 0; i < size; i++)
-	{
-		buffer[i] = txBuffer.read_char();
-	}
+  for (int i = 0; i < size; i++)
+  {
+    buffer[i] = txBuffer.read_char();
+  }
 
-	nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	if (ret < 0)
-	{
-		return 0;
-	}
+  if (ret < 0)
+  {
+    return 0;
+  }
 
-	return size;
+  return size;
 }
 
 // Write a single byte into the packet
 size_t arduino::MbedUDP::write(uint8_t byte)
 {
-	return write(&byte, 1);
+  return write(&byte, 1);
 }
 
 // Write size bytes from buffer into the packet
 size_t arduino::MbedUDP::write(const uint8_t *buffer, size_t size)
 {
-	for (int i = 0; i < size; i++)
-	{
-		if (txBuffer.availableForStore())
-		{
-			txBuffer.store_char(buffer[i]);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  for (int i = 0; i < size; i++)
+  {
+    if (txBuffer.availableForStore())
+    {
+      txBuffer.store_char(buffer[i]);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	return size;
+  return size;
 }
 
 int arduino::MbedUDP::parsePacket()
 {
-	nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
+  nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
 
-	if (ret == NSAPI_ERROR_WOULD_BLOCK)
-	{
-		// no data
-		return 0;
-	}
-	else if (ret == NSAPI_ERROR_NO_SOCKET)
-	{
-		// socket was not created correctly.
-		return -1;
-	}
-	// error codes below zero are errors
-	else if (ret <= 0)
-	{
-		// something else went wrong, need some tracing info...
-		return -1;
-	}
+  if (ret == NSAPI_ERROR_WOULD_BLOCK)
+  {
+    // no data
+    return 0;
+  }
+  else if (ret == NSAPI_ERROR_NO_SOCKET)
+  {
+    // socket was not created correctly.
+    return -1;
+  }
+  // error codes below zero are errors
+  else if (ret <= 0)
+  {
+    // something else went wrong, need some tracing info...
+    return -1;
+  }
 
-	// set current packet states
-	_current_packet = _packet_buffer;
-	_current_packet_size = ret;
+  // set current packet states
+  _current_packet = _packet_buffer;
+  _current_packet_size = ret;
 
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 int arduino::MbedUDP::available()
 {
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 // Read a single byte from the current packet
 int arduino::MbedUDP::read()
 {
-	// no current packet...
-	if (_current_packet == NULL)
-	{
-		// try reading the next frame, if there is no data return
-		if (parsePacket() == 0)
-			return -1;
-	}
+  // no current packet...
+  if (_current_packet == NULL)
+  {
+    // try reading the next frame, if there is no data return
+    if (parsePacket() == 0)
+      return -1;
+  }
 
-	_current_packet++;
+  _current_packet++;
 
-	// check for overflow
-	if (_current_packet > _packet_buffer + _current_packet_size)
-	{
-		// try reading the next packet...
-		if (parsePacket() > 0)
-		{
-			// if so, read first byte of next packet;
-			return read();
-		}
-		else
-		{
-			// no new data... not sure what to return here now
-			return -1;
-		}
-	}
+  // check for overflow
+  if (_current_packet > _packet_buffer + _current_packet_size)
+  {
+    // try reading the next packet...
+    if (parsePacket() > 0)
+    {
+      // if so, read first byte of next packet;
+      return read();
+    }
+    else
+    {
+      // no new data... not sure what to return here now
+      return -1;
+    }
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
 
 // Read up to len bytes from the current packet and place them into buffer
 // Returns the number of bytes read, or 0 if none are available
 int arduino::MbedUDP::read(unsigned char *buffer, size_t len)
 {
-	// Q: does Arduino read() function handle fragmentation? I won't for now...
-	if (_current_packet == NULL)
-	{
-		if (parsePacket() == 0)
-			return 0;
-	}
+  // Q: does Arduino read() function handle fragmentation? I won't for now...
+  if (_current_packet == NULL)
+  {
+    if (parsePacket() == 0)
+      return 0;
+  }
 
-	// how much data do we have in the current packet?
-	int offset = _current_packet - _packet_buffer;
+  // how much data do we have in the current packet?
+  int offset = _current_packet - _packet_buffer;
 
-	if (offset < 0)
-	{
-		return 0;
-	}
+  if (offset < 0)
+  {
+    return 0;
+  }
 
-	int max_bytes = _current_packet_size - offset;
+  int max_bytes = _current_packet_size - offset;
 
-	if (max_bytes < 0)
-	{
-		return 0;
-	}
+  if (max_bytes < 0)
+  {
+    return 0;
+  }
 
-	// at the end of the packet?
-	if (max_bytes == 0)
-	{
-		// try read next packet...
-		if (parsePacket() > 0)
-		{
-			return read(buffer, len);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  // at the end of the packet?
+  if (max_bytes == 0)
+  {
+    // try read next packet...
+    if (parsePacket() > 0)
+    {
+      return read(buffer, len);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	if (len > (size_t)max_bytes)
-		len = max_bytes;
+  if (len > (size_t)max_bytes)
+    len = max_bytes;
 
-	// copy to target buffer
-	memcpy(buffer, _current_packet, len);
+  // copy to target buffer
+  memcpy(buffer, _current_packet, len);
 
-	_current_packet += len;
+  _current_packet += len;
 
-	return len;
+  return len;
 }
 
 IPAddress arduino::MbedUDP::remoteIP()
 {
-	nsapi_addr_t address = _remoteHost.get_addr();
-	return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
+  nsapi_addr_t address = _remoteHost.get_addr();
+  return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
 }
 
 uint16_t arduino::MbedUDP::remotePort()
 {
-	return _remoteHost.get_port();
+  return _remoteHost.get_port();
 }
 
 void arduino::MbedUDP::flush()
 {
-	// TODO: a real check to ensure transmission has been completed
+  // TODO: a real check to ensure transmission has been completed
 }
 
 int arduino::MbedUDP::peek()
 {
-	if (_current_packet_size < 1)
-	{
-		return -1;
-	}
+  if (_current_packet_size < 1)
+  {
+    return -1;
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.h
index cc28266..94ca2ec 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/libraries/SocketWrapper/src/MbedUdp.h
@@ -25,7 +25,7 @@
 #include "netsocket/UDPSocket.h"
 
 #ifndef WIFI_UDP_BUFFER_SIZE
-	#define WIFI_UDP_BUFFER_SIZE 508
+  #define WIFI_UDP_BUFFER_SIZE 508
 #endif
 
 namespace arduino
@@ -33,74 +33,76 @@ namespace arduino
 
 class MbedUDP : public UDP
 {
-	private:
-		UDPSocket _socket;          // Mbed OS socket
-		SocketAddress _host;        // Host to be used to send data
-		SocketAddress _remoteHost;  // Remote host that sent incoming packets
+  private:
+    UDPSocket _socket;          // Mbed OS socket
+    SocketAddress _host;        // Host to be used to send data
+    SocketAddress _remoteHost;  // Remote host that sent incoming packets
 
-		uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
+    uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
 
-		// The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
-		// these two variables are used to cache the state of the current packet
-		uint8_t* _current_packet;
-		size_t _current_packet_size;
+    // The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
+    // these two variables are used to cache the state of the current packet
+    uint8_t* _current_packet;
+    size_t _current_packet_size;
 
-		RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
+    RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
 
-	protected:
-		virtual NetworkInterface* getNetwork() = 0;
+  protected:
+    virtual NetworkInterface* getNetwork() = 0;
 
-	public:
-		MbedUDP();  // Constructor
-		~MbedUDP();
-		virtual uint8_t begin(uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual uint8_t beginMulticast(IPAddress, uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual void stop();                                  // Finish with the UDP socket
+  public:
+    MbedUDP();  // Constructor
+    ~MbedUDP();
+    virtual uint8_t begin(
+      uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual uint8_t beginMulticast(IPAddress,
+                                   uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual void stop();                                  // Finish with the UDP socket
 
-		// Sending UDP packets
+    // Sending UDP packets
 
-		// Start building up a packet to send to the remote host specific in ip and port
-		// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
-		virtual int beginPacket(IPAddress ip, uint16_t port);
-		// Start building up a packet to send to the remote host specific in host and port
-		// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
-		virtual int beginPacket(const char* host, uint16_t port);
-		// Finish off this packet and send it
-		// Returns 1 if the packet was sent successfully, 0 if there was an error
-		virtual int endPacket();
-		// Write a single byte into the packet
-		virtual size_t write(uint8_t);
-		// Write size bytes from buffer into the packet
-		virtual size_t write(const uint8_t* buffer, size_t size);
+    // Start building up a packet to send to the remote host specific in ip and port
+    // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+    virtual int beginPacket(IPAddress ip, uint16_t port);
+    // Start building up a packet to send to the remote host specific in host and port
+    // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+    virtual int beginPacket(const char* host, uint16_t port);
+    // Finish off this packet and send it
+    // Returns 1 if the packet was sent successfully, 0 if there was an error
+    virtual int endPacket();
+    // Write a single byte into the packet
+    virtual size_t write(uint8_t);
+    // Write size bytes from buffer into the packet
+    virtual size_t write(const uint8_t* buffer, size_t size);
 
-		using Print::write;
+    using Print::write;
 
-		// Start processing the next available incoming packet
-		// Returns the size of the packet in bytes, or 0 if no packets are available
-		virtual int parsePacket();
-		// Number of bytes remaining in the current packet
-		virtual int available();
-		// Read a single byte from the current packet
-		virtual int read();
-		// Read up to len bytes from the current packet and place them into buffer
-		// Returns the number of bytes read, or 0 if none are available
-		virtual int read(unsigned char* buffer, size_t len);
-		// Read up to len characters from the current packet and place them into buffer
-		// Returns the number of characters read, or 0 if none are available
-		virtual int read(char* buffer, size_t len)
-		{
-			return read((unsigned char*)buffer, len);
-		};
-		// Return the next byte from the current packet without moving on to the next byte
-		virtual int peek();
-		virtual void flush();  // Finish reading the current packet
+    // Start processing the next available incoming packet
+    // Returns the size of the packet in bytes, or 0 if no packets are available
+    virtual int parsePacket();
+    // Number of bytes remaining in the current packet
+    virtual int available();
+    // Read a single byte from the current packet
+    virtual int read();
+    // Read up to len bytes from the current packet and place them into buffer
+    // Returns the number of bytes read, or 0 if none are available
+    virtual int read(unsigned char* buffer, size_t len);
+    // Read up to len characters from the current packet and place them into buffer
+    // Returns the number of characters read, or 0 if none are available
+    virtual int read(char* buffer, size_t len)
+    {
+      return read((unsigned char*)buffer, len);
+    };
+    // Return the next byte from the current packet without moving on to the next byte
+    virtual int peek();
+    virtual void flush();  // Finish reading the current packet
 
-		// Return the IP address of the host who sent the current incoming packet
-		virtual IPAddress remoteIP();
-		// // Return the port of the host who sent the current incoming packet
-		virtual uint16_t remotePort();
+    // Return the IP address of the host who sent the current incoming packet
+    virtual IPAddress remoteIP();
+    // // Return the port of the host who sent the current incoming packet
+    virtual uint16_t remotePort();
 
-		friend class MbedSocketClass;
+    friend class MbedSocketClass;
 };
 
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.cpp b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.cpp
index 81399f3..7573756 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.cpp
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.cpp
@@ -2,272 +2,272 @@
 
 arduino::MbedUDP::MbedUDP()
 {
-	_packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
-	_current_packet = NULL;
-	_current_packet_size = 0;
-	// if this allocation fails then ::begin will fail
+  _packet_buffer = new uint8_t[WIFI_UDP_BUFFER_SIZE];
+  _current_packet = NULL;
+  _current_packet_size = 0;
+  // if this allocation fails then ::begin will fail
 }
 
 arduino::MbedUDP::~MbedUDP()
 {
-	delete[] _packet_buffer;
+  delete[] _packet_buffer;
 }
 
 uint8_t arduino::MbedUDP::begin(uint16_t port)
 {
-	// success = 1, fail = 0
+  // success = 1, fail = 0
 
-	nsapi_error_t rt = _socket.open(getNetwork());
+  nsapi_error_t rt = _socket.open(getNetwork());
 
-	if (rt != NSAPI_ERROR_OK)
-	{
-		return 0;
-	}
+  if (rt != NSAPI_ERROR_OK)
+  {
+    return 0;
+  }
 
-	if (_socket.bind(port) < 0)
-	{
-		return 0;  //Failed to bind UDP Socket to port
-	}
+  if (_socket.bind(port) < 0)
+  {
+    return 0;  //Failed to bind UDP Socket to port
+  }
 
-	if (!_packet_buffer)
-	{
-		return 0;
-	}
+  if (!_packet_buffer)
+  {
+    return 0;
+  }
 
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	return 1;
+  return 1;
 }
 
 uint8_t arduino::MbedUDP::beginMulticast(IPAddress ip, uint16_t port)
 {
-	// success = 1, fail = 0
-	if (begin(port) != 1)
-	{
-		return 0;
-	}
+  // success = 1, fail = 0
+  if (begin(port) != 1)
+  {
+    return 0;
+  }
 
-	SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  SocketAddress socketAddress = SocketHelpers::socketAddressFromIpAddress(ip, port);
 
-	if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
-	{
-		printf("Error joining the multicast group\n");
-		return 0;
-	}
+  if (_socket.join_multicast_group(socketAddress) != NSAPI_ERROR_OK)
+  {
+    printf("Error joining the multicast group\n");
+    return 0;
+  }
 
-	return 1;
+  return 1;
 }
 
 void arduino::MbedUDP::stop()
 {
-	_socket.close();
+  _socket.close();
 }
 
 int arduino::MbedUDP::beginPacket(IPAddress ip, uint16_t port)
 {
-	_host = SocketHelpers::socketAddressFromIpAddress(ip, port);
-	//If IP is null and port is 0 the initialization failed
-	txBuffer.clear();
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketHelpers::socketAddressFromIpAddress(ip, port);
+  //If IP is null and port is 0 the initialization failed
+  txBuffer.clear();
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::beginPacket(const char *host, uint16_t port)
 {
-	_host = SocketAddress(host, port);
-	txBuffer.clear();
-	getNetwork()->gethostbyname(host, &_host);
-	//If IP is null and port is 0 the initialization failed
-	return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
+  _host = SocketAddress(host, port);
+  txBuffer.clear();
+  getNetwork()->gethostbyname(host, &_host);
+  //If IP is null and port is 0 the initialization failed
+  return (_host.get_ip_address() == nullptr && _host.get_port() == 0) ? 0 : 1;
 }
 
 int arduino::MbedUDP::endPacket()
 {
-	_socket.set_blocking(true);
-	_socket.set_timeout(1000);
+  _socket.set_blocking(true);
+  _socket.set_timeout(1000);
 
-	size_t size = txBuffer.available();
-	uint8_t buffer[size];
+  size_t size = txBuffer.available();
+  uint8_t buffer[size];
 
-	for (int i = 0; i < size; i++)
-	{
-		buffer[i] = txBuffer.read_char();
-	}
+  for (int i = 0; i < size; i++)
+  {
+    buffer[i] = txBuffer.read_char();
+  }
 
-	nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
-	_socket.set_blocking(false);
-	_socket.set_timeout(0);
+  nsapi_size_or_error_t ret = _socket.sendto(_host, buffer, size);
+  _socket.set_blocking(false);
+  _socket.set_timeout(0);
 
-	if (ret < 0)
-	{
-		return 0;
-	}
+  if (ret < 0)
+  {
+    return 0;
+  }
 
-	return size;
+  return size;
 }
 
 // Write a single byte into the packet
 size_t arduino::MbedUDP::write(uint8_t byte)
 {
-	return write(&byte, 1);
+  return write(&byte, 1);
 }
 
 // Write size bytes from buffer into the packet
 size_t arduino::MbedUDP::write(const uint8_t *buffer, size_t size)
 {
-	for (int i = 0; i < size; i++)
-	{
-		if (txBuffer.availableForStore())
-		{
-			txBuffer.store_char(buffer[i]);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  for (int i = 0; i < size; i++)
+  {
+    if (txBuffer.availableForStore())
+    {
+      txBuffer.store_char(buffer[i]);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	return size;
+  return size;
 }
 
 int arduino::MbedUDP::parsePacket()
 {
-	nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
+  nsapi_size_or_error_t ret = _socket.recvfrom(&_remoteHost, _packet_buffer, WIFI_UDP_BUFFER_SIZE);
 
-	if (ret == NSAPI_ERROR_WOULD_BLOCK)
-	{
-		// no data
-		return 0;
-	}
-	else if (ret == NSAPI_ERROR_NO_SOCKET)
-	{
-		// socket was not created correctly.
-		return -1;
-	}
-	// error codes below zero are errors
-	else if (ret <= 0)
-	{
-		// something else went wrong, need some tracing info...
-		return -1;
-	}
+  if (ret == NSAPI_ERROR_WOULD_BLOCK)
+  {
+    // no data
+    return 0;
+  }
+  else if (ret == NSAPI_ERROR_NO_SOCKET)
+  {
+    // socket was not created correctly.
+    return -1;
+  }
+  // error codes below zero are errors
+  else if (ret <= 0)
+  {
+    // something else went wrong, need some tracing info...
+    return -1;
+  }
 
-	// set current packet states
-	_current_packet = _packet_buffer;
-	_current_packet_size = ret;
+  // set current packet states
+  _current_packet = _packet_buffer;
+  _current_packet_size = ret;
 
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 int arduino::MbedUDP::available()
 {
-	return _current_packet_size;
+  return _current_packet_size;
 }
 
 // Read a single byte from the current packet
 int arduino::MbedUDP::read()
 {
-	// no current packet...
-	if (_current_packet == NULL)
-	{
-		// try reading the next frame, if there is no data return
-		if (parsePacket() == 0)
-			return -1;
-	}
+  // no current packet...
+  if (_current_packet == NULL)
+  {
+    // try reading the next frame, if there is no data return
+    if (parsePacket() == 0)
+      return -1;
+  }
 
-	_current_packet++;
+  _current_packet++;
 
-	// check for overflow
-	if (_current_packet > _packet_buffer + _current_packet_size)
-	{
-		// try reading the next packet...
-		if (parsePacket() > 0)
-		{
-			// if so, read first byte of next packet;
-			return read();
-		}
-		else
-		{
-			// no new data... not sure what to return here now
-			return -1;
-		}
-	}
+  // check for overflow
+  if (_current_packet > _packet_buffer + _current_packet_size)
+  {
+    // try reading the next packet...
+    if (parsePacket() > 0)
+    {
+      // if so, read first byte of next packet;
+      return read();
+    }
+    else
+    {
+      // no new data... not sure what to return here now
+      return -1;
+    }
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
 
 // Read up to len bytes from the current packet and place them into buffer
 // Returns the number of bytes read, or 0 if none are available
 int arduino::MbedUDP::read(unsigned char *buffer, size_t len)
 {
-	// Q: does Arduino read() function handle fragmentation? I won't for now...
-	if (_current_packet == NULL)
-	{
-		if (parsePacket() == 0)
-			return 0;
-	}
+  // Q: does Arduino read() function handle fragmentation? I won't for now...
+  if (_current_packet == NULL)
+  {
+    if (parsePacket() == 0)
+      return 0;
+  }
 
-	// how much data do we have in the current packet?
-	int offset = _current_packet - _packet_buffer;
+  // how much data do we have in the current packet?
+  int offset = _current_packet - _packet_buffer;
 
-	if (offset < 0)
-	{
-		return 0;
-	}
+  if (offset < 0)
+  {
+    return 0;
+  }
 
-	int max_bytes = _current_packet_size - offset;
+  int max_bytes = _current_packet_size - offset;
 
-	if (max_bytes < 0)
-	{
-		return 0;
-	}
+  if (max_bytes < 0)
+  {
+    return 0;
+  }
 
-	// at the end of the packet?
-	if (max_bytes == 0)
-	{
-		// try read next packet...
-		if (parsePacket() > 0)
-		{
-			return read(buffer, len);
-		}
-		else
-		{
-			return 0;
-		}
-	}
+  // at the end of the packet?
+  if (max_bytes == 0)
+  {
+    // try read next packet...
+    if (parsePacket() > 0)
+    {
+      return read(buffer, len);
+    }
+    else
+    {
+      return 0;
+    }
+  }
 
-	if (len > (size_t)max_bytes)
-		len = max_bytes;
+  if (len > (size_t)max_bytes)
+    len = max_bytes;
 
-	// copy to target buffer
-	memcpy(buffer, _current_packet, len);
+  // copy to target buffer
+  memcpy(buffer, _current_packet, len);
 
-	_current_packet += len;
+  _current_packet += len;
 
-	return len;
+  return len;
 }
 
 IPAddress arduino::MbedUDP::remoteIP()
 {
-	nsapi_addr_t address = _remoteHost.get_addr();
-	return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
+  nsapi_addr_t address = _remoteHost.get_addr();
+  return IPAddress(address.bytes[0], address.bytes[1], address.bytes[2], address.bytes[3]);
 }
 
 uint16_t arduino::MbedUDP::remotePort()
 {
-	return _remoteHost.get_port();
+  return _remoteHost.get_port();
 }
 
 void arduino::MbedUDP::flush()
 {
-	// TODO: a real check to ensure transmission has been completed
+  // TODO: a real check to ensure transmission has been completed
 }
 
 int arduino::MbedUDP::peek()
 {
-	if (_current_packet_size < 1)
-	{
-		return -1;
-	}
+  if (_current_packet_size < 1)
+  {
+    return -1;
+  }
 
-	return _current_packet[0];
+  return _current_packet[0];
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.h
index cc28266..94ca2ec 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/libraries/SocketWrapper/src/MbedUdp.h
@@ -25,7 +25,7 @@
 #include "netsocket/UDPSocket.h"
 
 #ifndef WIFI_UDP_BUFFER_SIZE
-	#define WIFI_UDP_BUFFER_SIZE 508
+  #define WIFI_UDP_BUFFER_SIZE 508
 #endif
 
 namespace arduino
@@ -33,74 +33,76 @@ namespace arduino
 
 class MbedUDP : public UDP
 {
-	private:
-		UDPSocket _socket;          // Mbed OS socket
-		SocketAddress _host;        // Host to be used to send data
-		SocketAddress _remoteHost;  // Remote host that sent incoming packets
+  private:
+    UDPSocket _socket;          // Mbed OS socket
+    SocketAddress _host;        // Host to be used to send data
+    SocketAddress _remoteHost;  // Remote host that sent incoming packets
 
-		uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
+    uint8_t* _packet_buffer;  // Raw packet buffer (contains data we got from the UDPSocket)
 
-		// The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
-		// these two variables are used to cache the state of the current packet
-		uint8_t* _current_packet;
-		size_t _current_packet_size;
+    // The Arduino APIs allow you to iterate through this buffer, so we need to be able to iterate over the current packet
+    // these two variables are used to cache the state of the current packet
+    uint8_t* _current_packet;
+    size_t _current_packet_size;
 
-		RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
+    RingBufferN<WIFI_UDP_BUFFER_SIZE> txBuffer;
 
-	protected:
-		virtual NetworkInterface* getNetwork() = 0;
+  protected:
+    virtual NetworkInterface* getNetwork() = 0;
 
-	public:
-		MbedUDP();  // Constructor
-		~MbedUDP();
-		virtual uint8_t begin(uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual uint8_t beginMulticast(IPAddress, uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
-		virtual void stop();                                  // Finish with the UDP socket
+  public:
+    MbedUDP();  // Constructor
+    ~MbedUDP();
+    virtual uint8_t begin(
+      uint16_t);                      // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual uint8_t beginMulticast(IPAddress,
+                                   uint16_t);  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 if there are no sockets available to use
+    virtual void stop();                                  // Finish with the UDP socket
 
-		// Sending UDP packets
+    // Sending UDP packets
 
-		// Start building up a packet to send to the remote host specific in ip and port
-		// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
-		virtual int beginPacket(IPAddress ip, uint16_t port);
-		// Start building up a packet to send to the remote host specific in host and port
-		// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
-		virtual int beginPacket(const char* host, uint16_t port);
-		// Finish off this packet and send it
-		// Returns 1 if the packet was sent successfully, 0 if there was an error
-		virtual int endPacket();
-		// Write a single byte into the packet
-		virtual size_t write(uint8_t);
-		// Write size bytes from buffer into the packet
-		virtual size_t write(const uint8_t* buffer, size_t size);
+    // Start building up a packet to send to the remote host specific in ip and port
+    // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+    virtual int beginPacket(IPAddress ip, uint16_t port);
+    // Start building up a packet to send to the remote host specific in host and port
+    // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+    virtual int beginPacket(const char* host, uint16_t port);
+    // Finish off this packet and send it
+    // Returns 1 if the packet was sent successfully, 0 if there was an error
+    virtual int endPacket();
+    // Write a single byte into the packet
+    virtual size_t write(uint8_t);
+    // Write size bytes from buffer into the packet
+    virtual size_t write(const uint8_t* buffer, size_t size);
 
-		using Print::write;
+    using Print::write;
 
-		// Start processing the next available incoming packet
-		// Returns the size of the packet in bytes, or 0 if no packets are available
-		virtual int parsePacket();
-		// Number of bytes remaining in the current packet
-		virtual int available();
-		// Read a single byte from the current packet
-		virtual int read();
-		// Read up to len bytes from the current packet and place them into buffer
-		// Returns the number of bytes read, or 0 if none are available
-		virtual int read(unsigned char* buffer, size_t len);
-		// Read up to len characters from the current packet and place them into buffer
-		// Returns the number of characters read, or 0 if none are available
-		virtual int read(char* buffer, size_t len)
-		{
-			return read((unsigned char*)buffer, len);
-		};
-		// Return the next byte from the current packet without moving on to the next byte
-		virtual int peek();
-		virtual void flush();  // Finish reading the current packet
+    // Start processing the next available incoming packet
+    // Returns the size of the packet in bytes, or 0 if no packets are available
+    virtual int parsePacket();
+    // Number of bytes remaining in the current packet
+    virtual int available();
+    // Read a single byte from the current packet
+    virtual int read();
+    // Read up to len bytes from the current packet and place them into buffer
+    // Returns the number of bytes read, or 0 if none are available
+    virtual int read(unsigned char* buffer, size_t len);
+    // Read up to len characters from the current packet and place them into buffer
+    // Returns the number of characters read, or 0 if none are available
+    virtual int read(char* buffer, size_t len)
+    {
+      return read((unsigned char*)buffer, len);
+    };
+    // Return the next byte from the current packet without moving on to the next byte
+    virtual int peek();
+    virtual void flush();  // Finish reading the current packet
 
-		// Return the IP address of the host who sent the current incoming packet
-		virtual IPAddress remoteIP();
-		// // Return the port of the host who sent the current incoming packet
-		virtual uint16_t remotePort();
+    // Return the IP address of the host who sent the current incoming packet
+    virtual IPAddress remoteIP();
+    // // Return the port of the host who sent the current incoming packet
+    virtual uint16_t remotePort();
 
-		friend class MbedSocketClass;
+    friend class MbedSocketClass;
 };
 
 }
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h b/Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
index bd98fb9..9f60fa0 100644
--- a/Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
+++ b/Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/cores/arduino/mbed/connectivity/lwipstack/include/lwipstack/lwipopts.h
@@ -21,8 +21,8 @@
 
 // Workaround for Linux timeval
 #if defined (TOOLCHAIN_GCC)
-	#define LWIP_TIMEVAL_PRIVATE 0
-	#include <sys/time.h>
+  #define LWIP_TIMEVAL_PRIVATE 0
+  #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
 #include "mbed_retarget.h"
@@ -35,7 +35,7 @@
 #define NO_SYS                      0
 
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
-	#error "Either IPv4 or IPv6 must be enabled."
+  #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
 #define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
@@ -47,16 +47,16 @@
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
-	#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
-		#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define PREF_ADDR_TIMEOUT           0
-	#else
-		#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
-		#define BOTH_ADDR_TIMEOUT           0
-	#endif
+  #if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
+    #define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define PREF_ADDR_TIMEOUT           0
+  #else
+    #define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
+    #define BOTH_ADDR_TIMEOUT           0
+  #endif
 #else
-	#define PREF_ADDR_TIMEOUT           0
-	#define BOTH_ADDR_TIMEOUT           0
+  #define PREF_ADDR_TIMEOUT           0
+  #define BOTH_ADDR_TIMEOUT           0
 #endif
 
 
@@ -68,52 +68,52 @@
 #define PREF_IPV6                   2
 
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
-	#define IP_VERSION_PREF             PREF_IPV6
+  #define IP_VERSION_PREF             PREF_IPV6
 #elif MBED_CONF_LWIP_IP_VER_PREF == 4
-	#define IP_VERSION_PREF             PREF_IPV4
+  #define IP_VERSION_PREF             PREF_IPV4
 #else
-	#error "Either IPv4 or IPv6 must be preferred."
+  #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
 #undef  LWIP_DEBUG
 #if MBED_CONF_LWIP_DEBUG_ENABLED
-	#define LWIP_DEBUG                  1
+  #define LWIP_DEBUG                  1
 #endif
 
 #if NO_SYS == 0
-	#include "cmsis_os2.h"
+  #include "cmsis_os2.h"
 
-	#define SYS_LIGHTWEIGHT_PROT        1
+  #define SYS_LIGHTWEIGHT_PROT        1
 
-	#define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
+  #define LWIP_RAW                    MBED_CONF_LWIP_RAW_SOCKET_ENABLED
 
-	#define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
+  #define MEMP_NUM_TCPIP_MSG_INPKT    MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
 
-	// Thread stacks use 8-byte alignment
-	#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
+  // Thread stacks use 8-byte alignment
+  #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-	#ifdef LWIP_DEBUG
-		// For LWIP debug, double the stack
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
-	#elif MBED_DEBUG
-		// When debug is enabled on the build increase stack 25 percent
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
-	#else
-		#define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    // For LWIP debug, double the stack
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
+  #elif MBED_DEBUG
+    // When debug is enabled on the build increase stack 25 percent
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
+  #else
+    #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
+  #endif
 
-	// Thread priority (osPriorityNormal by default)
-	#define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
+  // Thread priority (osPriorityNormal by default)
+  #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-	#ifdef LWIP_DEBUG
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
-	#else
-		#define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
-	#endif
+  #ifdef LWIP_DEBUG
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
+  #else
+    #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
+  #endif
 
-	#define MEMP_NUM_SYS_TIMEOUT        16
+  #define MEMP_NUM_SYS_TIMEOUT        16
 
-	#define sys_msleep(ms) sys_msleep(ms)
+  #define sys_msleep(ms) sys_msleep(ms)
 
 #endif
 
@@ -143,16 +143,16 @@
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
-	#undef PBUF_POOL_BUFSIZE
-	#define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
+  #undef PBUF_POOL_BUFSIZE
+  #define PBUF_POOL_BUFSIZE           LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
 #else
-	#ifndef PBUF_POOL_BUFSIZE
-		#if LWIP_IPV6
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#elif LWIP_IPV4
-			#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-		#endif
-	#endif
+  #ifndef PBUF_POOL_BUFSIZE
+    #if LWIP_IPV6
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #elif LWIP_IPV4
+      #define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
+    #endif
+  #endif
 #endif
 
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
@@ -181,14 +181,14 @@
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
 
 #if MBED_CONF_LWIP_TCP_ENABLED
-	#define LWIP_TCP                    1
-	#define TCP_OVERSIZE                0
-	#define LWIP_TCP_KEEPALIVE          1
+  #define LWIP_TCP                    1
+  #define TCP_OVERSIZE                0
+  #define LWIP_TCP_KEEPALIVE          1
 
-	#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+  #define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
 
 #else
-	#define LWIP_TCP                    0
+  #define LWIP_TCP                    0
 #endif
 
 #define LWIP_DNS                    1
@@ -251,13 +251,13 @@
 #define UDP_LPC_EMAC                LWIP_DBG_OFF
 
 #ifdef LWIP_DEBUG
-	#define MEMP_OVERFLOW_CHECK         1
-	#define MEMP_SANITY_CHECK           1
-	#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
-	#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
+  #define MEMP_OVERFLOW_CHECK         1
+  #define MEMP_SANITY_CHECK           1
+  #define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
+  #define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
 #else
-	#define LWIP_NOASSERT               1
-	#define LWIP_STATS                  0
+  #define LWIP_NOASSERT               1
+  #define LWIP_STATS                  0
 #endif
 
 #define TRACE_TO_ASCII_HEX_DUMP     0
@@ -269,18 +269,18 @@
 // Interface type configuration
 
 #if MBED_CONF_LWIP_ETHERNET_ENABLED
-	#define LWIP_ARP                    1
-	#define LWIP_ETHERNET               1
-	#define LWIP_DHCP                   LWIP_IPV4
+  #define LWIP_ARP                    1
+  #define LWIP_ETHERNET               1
+  #define LWIP_DHCP                   LWIP_IPV4
 #else
-	#define LWIP_ARP                    0
-	#define LWIP_ETHERNET               0
+  #define LWIP_ARP                    0
+  #define LWIP_ETHERNET               0
 #endif // MBED_CONF_LWIP_ETHERNET_ENABLED
 
 #if MBED_CONF_LWIP_L3IP_ENABLED
-	#define LWIP_L3IP                   1
+  #define LWIP_L3IP                   1
 #else
-	#define LWIP_L3IP                   0
+  #define LWIP_L3IP                   0
 #endif
 
 //Maximum size of network interface name
@@ -291,27 +291,27 @@
 // Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
 #if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
 
-	#define PPP_SUPPORT                      1
+  #define PPP_SUPPORT                      1
 
-	#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
-			#error LWIP: IPv4 PPP enabled but not IPv4
-		#endif
-		#undef LWIP
-		#define PPP_IPV4_SUPPORT                 1
-	#endif
+  #if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
+      #error LWIP: IPv4 PPP enabled but not IPv4
+    #endif
+    #undef LWIP
+    #define PPP_IPV4_SUPPORT                 1
+  #endif
 
-	#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
-		#define LWIP 0x11991199
-		#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
-			#error LWIP: IPv6 PPP enabled but not IPv6
-		#endif
-		#undef LWIP
-		#define PPP_IPV6_SUPPORT                 1
-		// Later to be dynamic for use for multiple interfaces
-		#define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
-	#endif
+  #if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
+    #define LWIP 0x11991199
+    #if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
+      #error LWIP: IPv6 PPP enabled but not IPv6
+    #endif
+    #undef LWIP
+    #define PPP_IPV6_SUPPORT                 1
+    // Later to be dynamic for use for multiple interfaces
+    #define LWIP_IPV6_DUP_DETECT_ATTEMPTS    0
+  #endif
 
 #endif
 
@@ -320,7 +320,7 @@
 // Make sure we default these to off, so
 // LWIP doesn't default to on
 #ifndef LWIP_ARP
-	#define LWIP_ARP                    0
+  #define LWIP_ARP                    0
 #endif
 
 // Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
@@ -337,9 +337,9 @@
 #include "lwip_tcp_isn.h"
 #define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
 #ifdef MBEDTLS_MD5_C
-	#define LWIP_USE_EXTERNAL_MBEDTLS       1
+  #define LWIP_USE_EXTERNAL_MBEDTLS       1
 #else
-	#define LWIP_USE_EXTERNAL_MBEDTLS       0
+  #define LWIP_USE_EXTERNAL_MBEDTLS       0
 #endif
 
 #define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.10/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.10/platform.txt
index e144b5d..48d4139 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.10/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.10/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.11/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.11/platform.txt
index b071d27..b0a4ca7 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.11/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.11/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.12/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.12/platform.txt
index 1e761f4..5428aa6 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.12/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.12/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.13/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.13/platform.txt
index 0e5ebb9..7573994 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.13/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.13/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.6/cores/arduino/Arduino.h b/Packages_Patches/arduino/hardware/samd/1.8.6/cores/arduino/Arduino.h
index 92e45e6..9c334d9 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.6/cores/arduino/Arduino.h
+++ b/Packages_Patches/arduino/hardware/samd/1.8.6/cores/arduino/Arduino.h
@@ -70,19 +70,19 @@ void loop( void ) ;
 
 // The following headers are for C++ only compilation
 #ifdef __cplusplus
-	#include "WCharacter.h"
-	#include "WString.h"
-	#include "Tone.h"
-	#include "WMath.h"
-	#include "HardwareSerial.h"
-	#include "pulse.h"
-	#include <bits/stl_algobase.h>
+  #include "WCharacter.h"
+  #include "WString.h"
+  #include "Tone.h"
+  #include "WMath.h"
+  #include "HardwareSerial.h"
+  #include "pulse.h"
+  #include <bits/stl_algobase.h>
 #endif
 
 #include "delay.h"
 
 #ifdef __cplusplus
-	#include "Uart.h"
+  #include "Uart.h"
 #endif
 
 // Include board variant
@@ -96,7 +96,7 @@ void loop( void ) ;
 #ifndef __cplusplus
 // undefine stdlib's abs if encountered
 #ifdef abs
-	#undef abs
+  #undef abs
 #endif // abs
 
 #define min(a,b) ((a)<(b)?(a):(b))
@@ -110,13 +110,13 @@ void loop( void ) ;
 template<class T, class L>
 auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (b < a) ? b : a;
+  return (b < a) ? b : a;
 }
 
 template<class T, class L>
 auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (a < b) ? b : a;
+  return (a < b) ? b : a;
 }
 #endif
 
@@ -138,13 +138,13 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #define bit(b) (1UL << (b))
 
 #if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
-	// Interrupts
-	#define digitalPinToInterrupt(P)   ( P )
+  // Interrupts
+  #define digitalPinToInterrupt(P)   ( P )
 #endif
 
 // Allows publishing the Beta core under samd-beta / arduino organization
 #ifndef ARDUINO_ARCH_SAMD
-	#define ARDUINO_ARCH_SAMD
+  #define ARDUINO_ARCH_SAMD
 #endif
 
 // USB Device
@@ -154,7 +154,7 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #include "USB/USB_host.h"
 
 #ifdef __cplusplus
-	#include "USB/CDC.h"
+  #include "USB/CDC.h"
 #endif
 
 #endif // Arduino_h
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.6/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.6/platform.txt
index 3516ebe..2e3d59f 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.6/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.6/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.7/cores/arduino/Arduino.h b/Packages_Patches/arduino/hardware/samd/1.8.7/cores/arduino/Arduino.h
index 92e45e6..9c334d9 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.7/cores/arduino/Arduino.h
+++ b/Packages_Patches/arduino/hardware/samd/1.8.7/cores/arduino/Arduino.h
@@ -70,19 +70,19 @@ void loop( void ) ;
 
 // The following headers are for C++ only compilation
 #ifdef __cplusplus
-	#include "WCharacter.h"
-	#include "WString.h"
-	#include "Tone.h"
-	#include "WMath.h"
-	#include "HardwareSerial.h"
-	#include "pulse.h"
-	#include <bits/stl_algobase.h>
+  #include "WCharacter.h"
+  #include "WString.h"
+  #include "Tone.h"
+  #include "WMath.h"
+  #include "HardwareSerial.h"
+  #include "pulse.h"
+  #include <bits/stl_algobase.h>
 #endif
 
 #include "delay.h"
 
 #ifdef __cplusplus
-	#include "Uart.h"
+  #include "Uart.h"
 #endif
 
 // Include board variant
@@ -96,7 +96,7 @@ void loop( void ) ;
 #ifndef __cplusplus
 // undefine stdlib's abs if encountered
 #ifdef abs
-	#undef abs
+  #undef abs
 #endif // abs
 
 #define min(a,b) ((a)<(b)?(a):(b))
@@ -110,13 +110,13 @@ void loop( void ) ;
 template<class T, class L>
 auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (b < a) ? b : a;
+  return (b < a) ? b : a;
 }
 
 template<class T, class L>
 auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (a < b) ? b : a;
+  return (a < b) ? b : a;
 }
 #endif
 
@@ -138,13 +138,13 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #define bit(b) (1UL << (b))
 
 #if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
-	// Interrupts
-	#define digitalPinToInterrupt(P)   ( P )
+  // Interrupts
+  #define digitalPinToInterrupt(P)   ( P )
 #endif
 
 // Allows publishing the Beta core under samd-beta / arduino organization
 #ifndef ARDUINO_ARCH_SAMD
-	#define ARDUINO_ARCH_SAMD
+  #define ARDUINO_ARCH_SAMD
 #endif
 
 // USB Device
@@ -154,7 +154,7 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #include "USB/USB_host.h"
 
 #ifdef __cplusplus
-	#include "USB/CDC.h"
+  #include "USB/CDC.h"
 #endif
 
 #endif // Arduino_h
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.7/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.7/platform.txt
index 4157aa4..6e4b48d 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.7/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.7/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.8/cores/Arduino.h b/Packages_Patches/arduino/hardware/samd/1.8.8/cores/Arduino.h
index 3885219..5ada9c5 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.8/cores/Arduino.h
+++ b/Packages_Patches/arduino/hardware/samd/1.8.8/cores/Arduino.h
@@ -75,19 +75,19 @@ void loop( void ) ;
 
 // The following headers are for C++ only compilation
 #ifdef __cplusplus
-	#include "WCharacter.h"
-	#include "WString.h"
-	#include "Tone.h"
-	#include "WMath.h"
-	#include "HardwareSerial.h"
-	#include "pulse.h"
-	#include <bits/stl_algobase.h>
+  #include "WCharacter.h"
+  #include "WString.h"
+  #include "Tone.h"
+  #include "WMath.h"
+  #include "HardwareSerial.h"
+  #include "pulse.h"
+  #include <bits/stl_algobase.h>
 #endif
 
 #include "delay.h"
 
 #ifdef __cplusplus
-	#include "Uart.h"
+  #include "Uart.h"
 #endif
 
 // Include board variant
@@ -101,7 +101,7 @@ void loop( void ) ;
 #ifndef __cplusplus
 // undefine stdlib's abs if encountered
 #ifdef abs
-	#undef abs
+  #undef abs
 #endif // abs
 
 #define min(a,b) ((a)<(b)?(a):(b))
@@ -115,13 +115,13 @@ void loop( void ) ;
 template<class T, class L>
 auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (b < a) ? b : a;
+  return (b < a) ? b : a;
 }
 
 template<class T, class L>
 auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (a < b) ? b : a;
+  return (a < b) ? b : a;
 }
 #endif
 
@@ -143,13 +143,13 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #define bit(b) (1UL << (b))
 
 #if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
-	// Interrupts
-	#define digitalPinToInterrupt(P)   ( P )
+  // Interrupts
+  #define digitalPinToInterrupt(P)   ( P )
 #endif
 
 // Allows publishing the Beta core under samd-beta / arduino organization
 #ifndef ARDUINO_ARCH_SAMD
-	#define ARDUINO_ARCH_SAMD
+  #define ARDUINO_ARCH_SAMD
 #endif
 
 // USB Device
@@ -159,7 +159,7 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #include "USB/USB_host.h"
 
 #ifdef __cplusplus
-	#include "USB/CDC.h"
+  #include "USB/CDC.h"
 #endif
 
 #endif // Arduino_h
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.8/cores/arduino/Arduino.h b/Packages_Patches/arduino/hardware/samd/1.8.8/cores/arduino/Arduino.h
index 3885219..5ada9c5 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.8/cores/arduino/Arduino.h
+++ b/Packages_Patches/arduino/hardware/samd/1.8.8/cores/arduino/Arduino.h
@@ -75,19 +75,19 @@ void loop( void ) ;
 
 // The following headers are for C++ only compilation
 #ifdef __cplusplus
-	#include "WCharacter.h"
-	#include "WString.h"
-	#include "Tone.h"
-	#include "WMath.h"
-	#include "HardwareSerial.h"
-	#include "pulse.h"
-	#include <bits/stl_algobase.h>
+  #include "WCharacter.h"
+  #include "WString.h"
+  #include "Tone.h"
+  #include "WMath.h"
+  #include "HardwareSerial.h"
+  #include "pulse.h"
+  #include <bits/stl_algobase.h>
 #endif
 
 #include "delay.h"
 
 #ifdef __cplusplus
-	#include "Uart.h"
+  #include "Uart.h"
 #endif
 
 // Include board variant
@@ -101,7 +101,7 @@ void loop( void ) ;
 #ifndef __cplusplus
 // undefine stdlib's abs if encountered
 #ifdef abs
-	#undef abs
+  #undef abs
 #endif // abs
 
 #define min(a,b) ((a)<(b)?(a):(b))
@@ -115,13 +115,13 @@ void loop( void ) ;
 template<class T, class L>
 auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (b < a) ? b : a;
+  return (b < a) ? b : a;
 }
 
 template<class T, class L>
 auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (a < b) ? b : a;
+  return (a < b) ? b : a;
 }
 #endif
 
@@ -143,13 +143,13 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #define bit(b) (1UL << (b))
 
 #if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
-	// Interrupts
-	#define digitalPinToInterrupt(P)   ( P )
+  // Interrupts
+  #define digitalPinToInterrupt(P)   ( P )
 #endif
 
 // Allows publishing the Beta core under samd-beta / arduino organization
 #ifndef ARDUINO_ARCH_SAMD
-	#define ARDUINO_ARCH_SAMD
+  #define ARDUINO_ARCH_SAMD
 #endif
 
 // USB Device
@@ -159,7 +159,7 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #include "USB/USB_host.h"
 
 #ifdef __cplusplus
-	#include "USB/CDC.h"
+  #include "USB/CDC.h"
 #endif
 
 #endif // Arduino_h
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.8/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.8/platform.txt
index abcb1ed..b3708f4 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.8/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.8/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h b/Packages_Patches/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h
index 3885219..5ada9c5 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h
+++ b/Packages_Patches/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h
@@ -75,19 +75,19 @@ void loop( void ) ;
 
 // The following headers are for C++ only compilation
 #ifdef __cplusplus
-	#include "WCharacter.h"
-	#include "WString.h"
-	#include "Tone.h"
-	#include "WMath.h"
-	#include "HardwareSerial.h"
-	#include "pulse.h"
-	#include <bits/stl_algobase.h>
+  #include "WCharacter.h"
+  #include "WString.h"
+  #include "Tone.h"
+  #include "WMath.h"
+  #include "HardwareSerial.h"
+  #include "pulse.h"
+  #include <bits/stl_algobase.h>
 #endif
 
 #include "delay.h"
 
 #ifdef __cplusplus
-	#include "Uart.h"
+  #include "Uart.h"
 #endif
 
 // Include board variant
@@ -101,7 +101,7 @@ void loop( void ) ;
 #ifndef __cplusplus
 // undefine stdlib's abs if encountered
 #ifdef abs
-	#undef abs
+  #undef abs
 #endif // abs
 
 #define min(a,b) ((a)<(b)?(a):(b))
@@ -115,13 +115,13 @@ void loop( void ) ;
 template<class T, class L>
 auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (b < a) ? b : a;
+  return (b < a) ? b : a;
 }
 
 template<class T, class L>
 auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 {
-	return (a < b) ? b : a;
+  return (a < b) ? b : a;
 }
 #endif
 
@@ -143,13 +143,13 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #define bit(b) (1UL << (b))
 
 #if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
-	// Interrupts
-	#define digitalPinToInterrupt(P)   ( P )
+  // Interrupts
+  #define digitalPinToInterrupt(P)   ( P )
 #endif
 
 // Allows publishing the Beta core under samd-beta / arduino organization
 #ifndef ARDUINO_ARCH_SAMD
-	#define ARDUINO_ARCH_SAMD
+  #define ARDUINO_ARCH_SAMD
 #endif
 
 // USB Device
@@ -159,7 +159,7 @@ auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
 #include "USB/USB_host.h"
 
 #ifdef __cplusplus
-	#include "USB/CDC.h"
+  #include "USB/CDC.h"
 #endif
 
 #endif // Arduino_h
diff --git a/Packages_Patches/arduino/hardware/samd/1.8.9/platform.txt b/Packages_Patches/arduino/hardware/samd/1.8.9/platform.txt
index 9aa0320..21c1d27 100644
--- a/Packages_Patches/arduino/hardware/samd/1.8.9/platform.txt
+++ b/Packages_Patches/arduino/hardware/samd/1.8.9/platform.txt
@@ -58,7 +58,7 @@ compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 compiler.readelf.cmd=arm-none-eabi-readelf
 
-# this can be overriden in boards.txt
+# this can be overridden in boards.txt
 build.extra_flags=
 
 # These can be overridden in platform.local.txt