Merge pull request #64 from valeros/develop

Output compiled size and static memory usage // Resolve #59

platformio/builder/scripts/atmelavr.py

@@ -22,6 +22,7 @@ env.Replace(
     CXX="avr-g++",
     OBJCOPY="avr-objcopy",
     RANLIB="avr-ranlib",
+    SIZETOOL="avr-size",
 
     ARFLAGS=["rcs"],
 
@@ -58,6 +59,8 @@ env.Replace(
         "-Wl,--start-group"
     ],
 
+    SIZEPRINTCMD='"$SIZETOOL" --mcu=$BOARD_MCU -C -d $SOURCES',
+
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-avrdude", "avrdude"),
     UPLOADERFLAGS=[
         "-q",  # suppress progress output
@@ -159,6 +162,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_hex = env.ElfToHex(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload by default .hex file
 #
@@ -199,4 +209,4 @@ if is_uptarget:
 # Setup default targets
 #
 
-Default(target_hex)
+Default([target_hex, target_size])

platformio/builder/scripts/atmelsam.py

@@ -21,6 +21,7 @@ env.Replace(
     CXX="arm-none-eabi-g++",
     OBJCOPY="arm-none-eabi-objcopy",
     RANLIB="arm-none-eabi-ranlib",
+    SIZETOOL="arm-none-eabi-size",
 
     ARFLAGS=["rcs"],
 
@@ -60,6 +61,8 @@ env.Replace(
         "-mthumb"
     ],
 
+    SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES',
+
     UPLOADER=join("$PIOPACKAGES_DIR", "$PIOPACKAGE_UPLOADER", "bossac"),
     UPLOADERFLAGS=[
         "--info",
@@ -104,6 +107,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_bin = env.ElfToBin(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload by default .bin file
 #
@@ -134,4 +144,4 @@ if is_uptarget:
 # Setup default targets
 #
 
-Default(target_bin)
+Default([target_bin, target_size])

platformio/builder/scripts/stm32.py

@@ -20,6 +20,7 @@ env.Replace(
     CXX="arm-none-eabi-g++",
     OBJCOPY="arm-none-eabi-objcopy",
     RANLIB="arm-none-eabi-ranlib",
+    SIZETOOL="arm-none-eabi-size",
 
     ARFLAGS=["rcs"],
 
@@ -62,6 +63,8 @@ env.Replace(
         "-mcpu=${BOARD_OPTIONS['build']['mcu']}"
     ],
 
+    SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES',
+
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-stlink", "st-flash"),
     UPLOADERFLAGS=[
         "write",        # write in flash
@@ -122,6 +125,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_bin = env.ElfToBin(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload by default .bin file
 #
@@ -133,4 +143,4 @@ AlwaysBuild(upload)
 # Target: Define targets
 #
 
-Default(target_bin)
+Default([target_bin, target_size])

platformio/builder/scripts/teensy.py

@@ -22,6 +22,7 @@ if env.get("BOARD_OPTIONS", {}).get("build", {}).get("core") == "teensy":
         CXX="avr-g++",
         OBJCOPY="avr-objcopy",
         RANLIB="avr-ranlib",
+        SIZETOOL="avr-size",
 
         ARFLAGS=["rcs"],
 
@@ -39,7 +40,9 @@ if env.get("BOARD_OPTIONS", {}).get("build", {}).get("core") == "teensy":
 
         LINKFLAGS=[
             "-mmcu=$BOARD_MCU"
-        ]
+        ],
+
+        SIZEPRINTCMD='"$SIZETOOL" --mcu=$BOARD_MCU -C -d $SOURCES'
     )
 
 elif env.get("BOARD_OPTIONS", {}).get("build", {}).get("core") == "teensy3":
@@ -50,6 +53,7 @@ elif env.get("BOARD_OPTIONS", {}).get("build", {}).get("core") == "teensy3":
         CXX="arm-none-eabi-g++",
         OBJCOPY="arm-none-eabi-objcopy",
         RANLIB="arm-none-eabi-ranlib",
+        SIZETOOL="arm-none-eabi-size",
 
         ARFLAGS=["rcs"],
 
@@ -82,7 +86,9 @@ elif env.get("BOARD_OPTIONS", {}).get("build", {}).get("core") == "teensy3":
             "-Wl,--gc-sections",
             # "-nostartfiles",
             # "-nostdlib",
-        ]
+        ],
+
+        SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES'
     )
 
 env.Append(
@@ -175,6 +181,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_hex = env.ElfToHex(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload by default .hex file
 #
@@ -186,4 +199,4 @@ AlwaysBuild(upload)
 # Target: Define targets
 #
 
-Default(target_hex)
+Default([target_hex, target_size])

platformio/builder/scripts/timsp430.py

@@ -21,6 +21,7 @@ env.Replace(
     CXX="msp430-g++",
     OBJCOPY="msp430-objcopy",
     RANLIB="msp430-ranlib",
+    SIZETOOL="msp430-size",
 
     ARFLAGS=["rcs"],
 
@@ -52,6 +53,8 @@ env.Replace(
         "-Wl,-gc-sections,-u,main"
     ],
 
+    SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES',
+
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-mspdebug", "mspdebug"),
     UPLOADERFLAGS=[
         "$UPLOAD_PROTOCOL" if system() != "Windows" else "tilib",
@@ -93,6 +96,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_hex = env.ElfToHex(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload firmware
 #
@@ -104,4 +114,4 @@ AlwaysBuild(upload)
 # Target: Define targets
 #
 
-Default(target_hex)
+Default([target_hex, target_size])

platformio/builder/scripts/titiva.py

@@ -20,6 +20,7 @@ env.Replace(
     CXX="arm-none-eabi-g++",
     OBJCOPY="arm-none-eabi-objcopy",
     RANLIB="arm-none-eabi-ranlib",
+    SIZETOOL="arm-none-eabi-size",
 
     ARFLAGS=["rcs"],
 
@@ -71,6 +72,8 @@ env.Replace(
         "-fsingle-precision-constant"
     ],
 
+    SIZEPRINTCMD='"$SIZETOOL" -B -d $SOURCES',
+
     UPLOADER=join("$PIOPACKAGES_DIR", "tool-lm4flash", "lm4flash"),
     UPLOADCMD="$UPLOADER $SOURCES"
 )
@@ -106,6 +109,13 @@ if "uploadlazy" in COMMAND_LINE_TARGETS:
 else:
     target_bin = env.ElfToBin(join("$BUILD_DIR", "firmware"), target_elf)
 
+#
+# Target: Print binary size
+#
+
+target_size = env.Alias("size", target_elf, "$SIZEPRINTCMD")
+AlwaysBuild(target_size)
+
 #
 # Target: Upload firmware
 #
@@ -117,4 +127,4 @@ AlwaysBuild(upload)
 # Target: Define targets
 #
 
-Default(target_bin)
+Default([target_bin, target_size])