platformio/platformio-core
1
0
Fork 1
mirror of https://github.com/platformio/platformio-core.git synced 2025-11-05 08:21:38 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'release/v2.9.0'

Browse Source
This commit is contained in:
Ivan Kravets
2016-04-28 18:48:01 +03:00
parent e50121e013 9b86fdcfb0
commit f80b378a7b
266 changed files with 7713 additions and 1056 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
examples/atmelavr-and-arduino/adafruit-blink/.gitignore vendored
View File

@@ -1 +0,0 @@
.pioenvs

24
examples/atmelavr-and-arduino/adafruit-blink/src/Blink.pde
View File

@@ -1,24 +0,0 @@
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
int led = 1; // blink 'digital' pin 1 - AKA the built in red LED
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH);
delay(1000);
digitalWrite(led, LOW);
delay(1000);
}

3
examples/atmelavr-and-arduino/arduino-blink/.gitignore vendored Normal file
View File

@@ -0,0 +1,3 @@
.pioenvs
.clang_complete
.gcc-flags.json

0
examples/atmelavr-and-arduino/adafruit-blink/.travis.yml → examples/atmelavr-and-arduino/arduino-blink/.travis.yml
View File

17
examples/atmelavr-and-arduino/adafruit-blink/README.rst → examples/atmelavr-and-arduino/arduino-blink/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,26 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/adafruit-blink
> cd platformio-examples/atmelavr-and-arduino/arduino-blink
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Build specific environment
> platformio run -e flora8
# Upload firmware for the specific environment
> platformio run -e flora8 --target upload
# Clean build files
> platformio run --target clean

0
examples/atmelavr-and-arduino/adafruit-blink/lib/readme.txt → examples/atmelavr-and-arduino/arduino-blink/lib/readme.txt
View File

22
examples/atmelavr-and-arduino/adafruit-blink/platformio.ini → examples/atmelavr-and-arduino/arduino-blink/platformio.ini
View File

@@ -17,17 +17,29 @@
# Automatic targets - enable auto-uploading
# targets = upload
[env:uno]
platform = atmelavr
framework = arduino
board = uno
[env:leonardo]
platform = atmelavr
framework = arduino
board = leonardo
[env:flora8]
platform = atmelavr
framework = arduino
board = flora8
[env:trinket3]
platform = atmelavr
framework = arduino
board = trinket3
build_flags = -D LED_BUILTIN=1
[env:protrinket5]
platform = atmelavr
framework = arduino
board = protrinket5
[env:panStampAVR]
platform = atmelavr
framework = arduino
board = panStampAVR
build_flags = -D LED_BUILTIN=13

25
examples/atmelavr-and-arduino/arduino-blink/src/Blink.cpp Normal file
View File

@@ -0,0 +1,25 @@
/*
* Blink
* Turns on an LED on for one second,
* then off for one second, repeatedly.
*/
#include <Arduino.h>
void setup()
{
// initialize LED digital pin as an output.
pinMode(LED_BUILTIN, OUTPUT);
}
void loop()
{
// turn the LED on (HIGH is the voltage level)
digitalWrite(LED_BUILTIN, HIGH);
// wait for a second
delay(1000);
// turn the LED off by making the voltage LOW
digitalWrite(LED_BUILTIN, LOW);
// wait for a second
delay(1000);
}

4
examples/atmelavr-and-arduino/arduino-external-libs/.gitignore vendored
View File

@@ -1 +1,3 @@
.pioenvs
.pioenvs
.clang_complete
.gcc-flags.json

11
examples/atmelavr-and-arduino/arduino-external-libs/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,20 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/arduino-external-libs
> cd platformio-examples/atmelavr-and-arduino/arduino-external-libs
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Clean build files
> platformio run --target clean

2
examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-GFX-Library

Submodule examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-GFX-Library updated: 6d40eb3423...334e815bc1

2
examples/atmelavr-and-arduino/arduino-external-libs/platformio.ini
View File

@@ -17,7 +17,7 @@
# Automatic targets - enable auto-uploading
# targets = upload
[env:arduino_uno]
[env:uno]
platform = atmelavr
framework = arduino
board = uno

114
examples/atmelavr-and-arduino/arduino-external-libs/src/DS18x20_Temperature.cpp Normal file
View File

@@ -0,0 +1,114 @@
#include <Arduino.h>
#include <OneWire.h>
// OneWire DS18S20, DS18B20, DS1822 Temperature Example
//
// http://www.pjrc.com/teensy/td_libs_OneWire.html
//
// The DallasTemperature library can do all this work for you!
// http://milesburton.com/Dallas_Temperature_Control_Library
OneWire ds(10); // on pin 10 (a 4.7K resistor is necessary)
void setup(void) {
Serial.begin(9600);
}
void loop(void) {
byte i;
byte present = 0;
byte type_s;
byte data[12];
byte addr[8];
float celsius, fahrenheit;
if ( !ds.search(addr)) {
Serial.println("No more addresses.");
Serial.println();
ds.reset_search();
delay(250);
return;
}
Serial.print("ROM =");
for( i = 0; i < 8; i++) {
Serial.write(' ');
Serial.print(addr[i], HEX);
}
if (OneWire::crc8(addr, 7) != addr[7]) {
Serial.println("CRC is not valid!");
return;
}
Serial.println();
// the first ROM byte indicates which chip
switch (addr[0]) {
case 0x10:
Serial.println(" Chip = DS18S20"); // or old DS1820
type_s = 1;
break;
case 0x28:
Serial.println(" Chip = DS18B20");
type_s = 0;
break;
case 0x22:
Serial.println(" Chip = DS1822");
type_s = 0;
break;
default:
Serial.println("Device is not a DS18x20 family device.");
return;
}
ds.reset();
ds.select(addr);
ds.write(0x44, 1); // start conversion, with parasite power on at the end
delay(1000); // maybe 750ms is enough, maybe not
// we might do a ds.depower() here, but the reset will take care of it.
present = ds.reset();
ds.select(addr);
ds.write(0xBE); // Read Scratchpad
Serial.print(" Data = ");
Serial.print(present, HEX);
Serial.print(" ");
for ( i = 0; i < 9; i++) { // we need 9 bytes
data[i] = ds.read();
Serial.print(data[i], HEX);
Serial.print(" ");
}
Serial.print(" CRC=");
Serial.print(OneWire::crc8(data, 8), HEX);
Serial.println();
// Convert the data to actual temperature
// because the result is a 16 bit signed integer, it should
// be stored to an "int16_t" type, which is always 16 bits
// even when compiled on a 32 bit processor.
int16_t raw = (data[1] << 8) | data[0];
if (type_s) {
raw = raw << 3; // 9 bit resolution default
if (data[7] == 0x10) {
// "count remain" gives full 12 bit resolution
raw = (raw & 0xFFF0) + 12 - data[6];
}
} else {
byte cfg = (data[4] & 0x60);
// at lower res, the low bits are undefined, so let's zero them
if (cfg == 0x00) raw = raw & ~7; // 9 bit resolution, 93.75 ms
else if (cfg == 0x20) raw = raw & ~3; // 10 bit res, 187.5 ms
else if (cfg == 0x40) raw = raw & ~1; // 11 bit res, 375 ms
//// default is 12 bit resolution, 750 ms conversion time
}
celsius = (float)raw / 16.0;
fahrenheit = celsius * 1.8 + 32.0;
Serial.print(" Temperature = ");
Serial.print(celsius);
Serial.print(" Celsius, ");
Serial.print(fahrenheit);
Serial.println(" Fahrenheit");
}

350
examples/atmelavr-and-arduino/arduino-external-libs/src/pcdtest.ino
View File

@@ -1,350 +0,0 @@
/*********************************************************************
This is an example sketch for our Monochrome Nokia 5110 LCD Displays
Pick one up today in the adafruit shop!
------> http://www.adafruit.com/products/338
These displays use SPI to communicate, 4 or 5 pins are required to
interface
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, check license.txt for more information
All text above, and the splash screen must be included in any redistribution
*********************************************************************/
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Adafruit_PCD8544.h>
// Software SPI (slower updates, more flexible pin options):
// pin 7 - Serial clock out (SCLK)
// pin 6 - Serial data out (DIN)
// pin 5 - Data/Command select (D/C)
// pin 4 - LCD chip select (CS)
// pin 3 - LCD reset (RST)
Adafruit_PCD8544 display = Adafruit_PCD8544(7, 6, 5, 4, 3);
// Hardware SPI (faster, but must use certain hardware pins):
// SCK is LCD serial clock (SCLK) - this is pin 13 on Arduino Uno
// MOSI is LCD DIN - this is pin 11 on an Arduino Uno
// pin 5 - Data/Command select (D/C)
// pin 4 - LCD chip select (CS)
// pin 3 - LCD reset (RST)
// Adafruit_PCD8544 display = Adafruit_PCD8544(5, 4, 3);
// Note with hardware SPI MISO and SS pins aren't used but will still be read
// and written to during SPI transfer. Be careful sharing these pins!
#define NUMFLAKES 10
#define XPOS 0
#define YPOS 1
#define DELTAY 2
#define LOGO16_GLCD_HEIGHT 16
#define LOGO16_GLCD_WIDTH 16
static const unsigned char PROGMEM logo16_glcd_bmp[] =
{ B00000000, B11000000,
B00000001, B11000000,
B00000001, B11000000,
B00000011, B11100000,
B11110011, B11100000,
B11111110, B11111000,
B01111110, B11111111,
B00110011, B10011111,
B00011111, B11111100,
B00001101, B01110000,
B00011011, B10100000,
B00111111, B11100000,
B00111111, B11110000,
B01111100, B11110000,
B01110000, B01110000,
B00000000, B00110000 };
void setup() {
Serial.begin(9600);
display.begin();
// init done
// you can change the contrast around to adapt the display
// for the best viewing!
display.setContrast(50);
display.display(); // show splashscreen
delay(2000);
display.clearDisplay(); // clears the screen and buffer
// draw a single pixel
display.drawPixel(10, 10, BLACK);
display.display();
delay(2000);
display.clearDisplay();
// draw many lines
testdrawline();
display.display();
delay(2000);
display.clearDisplay();
// draw rectangles
testdrawrect();
display.display();
delay(2000);
display.clearDisplay();
// draw multiple rectangles
testfillrect();
display.display();
delay(2000);
display.clearDisplay();
// draw mulitple circles
testdrawcircle();
display.display();
delay(2000);
display.clearDisplay();
// draw a circle, 10 pixel radius
display.fillCircle(display.width()/2, display.height()/2, 10, BLACK);
display.display();
delay(2000);
display.clearDisplay();
testdrawroundrect();
delay(2000);
display.clearDisplay();
testfillroundrect();
delay(2000);
display.clearDisplay();
testdrawtriangle();
delay(2000);
display.clearDisplay();
testfilltriangle();
delay(2000);
display.clearDisplay();
// draw the first ~12 characters in the font
testdrawchar();
display.display();
delay(2000);
display.clearDisplay();
// text display tests
display.setTextSize(1);
display.setTextColor(BLACK);
display.setCursor(0,0);
display.println("Hello, world!");
display.setTextColor(WHITE, BLACK); // 'inverted' text
display.println(3.141592);
display.setTextSize(2);
display.setTextColor(BLACK);
display.print("0x"); display.println(0xDEADBEEF, HEX);
display.display();
delay(2000);
// rotation example
display.clearDisplay();
display.setRotation(1); // rotate 90 degrees counter clockwise, can also use values of 2 and 3 to go further.
display.setTextSize(1);
display.setTextColor(BLACK);
display.setCursor(0,0);
display.println("Rotation");
display.setTextSize(2);
display.println("Example!");
display.display();
delay(2000);
// revert back to no rotation
display.setRotation(0);
// miniature bitmap display
display.clearDisplay();
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, 1);
display.display();
// invert the display
display.invertDisplay(true);
delay(1000);
display.invertDisplay(false);
delay(1000);
// draw a bitmap icon and 'animate' movement
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_WIDTH, LOGO16_GLCD_HEIGHT);
}
void loop() {
}
void testdrawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
uint8_t icons[NUMFLAKES][3];
srandom(666); // whatever seed
// initialize
for (uint8_t f=0; f< NUMFLAKES; f++) {
icons[f][XPOS] = random() % display.width();
icons[f][YPOS] = 0;
icons[f][DELTAY] = random() % 5 + 1;
Serial.print("x: ");
Serial.print(icons[f][XPOS], DEC);
Serial.print(" y: ");
Serial.print(icons[f][YPOS], DEC);
Serial.print(" dy: ");
Serial.println(icons[f][DELTAY], DEC);
}
while (1) {
// draw each icon
for (uint8_t f=0; f< NUMFLAKES; f++) {
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, BLACK);
}
display.display();
delay(200);
// then erase it + move it
for (uint8_t f=0; f< NUMFLAKES; f++) {
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, WHITE);
// move it
icons[f][YPOS] += icons[f][DELTAY];
// if its gone, reinit
if (icons[f][YPOS] > display.height()) {
icons[f][XPOS] = random() % display.width();
icons[f][YPOS] = 0;
icons[f][DELTAY] = random() % 5 + 1;
}
}
}
}
void testdrawchar(void) {
display.setTextSize(1);
display.setTextColor(BLACK);
display.setCursor(0,0);
for (uint8_t i=0; i < 168; i++) {
if (i == '\n') continue;
display.write(i);
//if ((i > 0) && (i % 14 == 0))
//display.println();
}
display.display();
}
void testdrawcircle(void) {
for (int16_t i=0; i<display.height(); i+=2) {
display.drawCircle(display.width()/2, display.height()/2, i, BLACK);
display.display();
}
}
void testfillrect(void) {
uint8_t color = 1;
for (int16_t i=0; i<display.height()/2; i+=3) {
// alternate colors
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, color%2);
display.display();
color++;
}
}
void testdrawtriangle(void) {
for (int16_t i=0; i<min(display.width(),display.height())/2; i+=5) {
display.drawTriangle(display.width()/2, display.height()/2-i,
display.width()/2-i, display.height()/2+i,
display.width()/2+i, display.height()/2+i, BLACK);
display.display();
}
}
void testfilltriangle(void) {
uint8_t color = BLACK;
for (int16_t i=min(display.width(),display.height())/2; i>0; i-=5) {
display.fillTriangle(display.width()/2, display.height()/2-i,
display.width()/2-i, display.height()/2+i,
display.width()/2+i, display.height()/2+i, color);
if (color == WHITE) color = BLACK;
else color = WHITE;
display.display();
}
}
void testdrawroundrect(void) {
for (int16_t i=0; i<display.height()/2-2; i+=2) {
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, BLACK);
display.display();
}
}
void testfillroundrect(void) {
uint8_t color = BLACK;
for (int16_t i=0; i<display.height()/2-2; i+=2) {
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, color);
if (color == WHITE) color = BLACK;
else color = WHITE;
display.display();
}
}
void testdrawrect(void) {
for (int16_t i=0; i<display.height()/2; i+=2) {
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, BLACK);
display.display();
}
}
void testdrawline() {
for (int16_t i=0; i<display.width(); i+=4) {
display.drawLine(0, 0, i, display.height()-1, BLACK);
display.display();
}
for (int16_t i=0; i<display.height(); i+=4) {
display.drawLine(0, 0, display.width()-1, i, BLACK);
display.display();
}
delay(250);
display.clearDisplay();
for (int16_t i=0; i<display.width(); i+=4) {
display.drawLine(0, display.height()-1, i, 0, BLACK);
display.display();
}
for (int8_t i=display.height()-1; i>=0; i-=4) {
display.drawLine(0, display.height()-1, display.width()-1, i, BLACK);
display.display();
}
delay(250);
display.clearDisplay();
for (int16_t i=display.width()-1; i>=0; i-=4) {
display.drawLine(display.width()-1, display.height()-1, i, 0, BLACK);
display.display();
}
for (int16_t i=display.height()-1; i>=0; i-=4) {
display.drawLine(display.width()-1, display.height()-1, 0, i, BLACK);
display.display();
}
delay(250);
display.clearDisplay();
for (int16_t i=0; i<display.height(); i+=4) {
display.drawLine(display.width()-1, 0, 0, i, BLACK);
display.display();
}
for (int16_t i=0; i<display.width(); i+=4) {
display.drawLine(display.width()-1, 0, i, display.height()-1, BLACK);
display.display();
}
delay(250);
}

4
examples/atmelavr-and-arduino/arduino-internal-libs/.gitignore vendored
View File

@@ -1 +1,3 @@
.pioenvs
.pioenvs
.clang_complete
.gcc-flags.json

17
examples/atmelavr-and-arduino/arduino-internal-libs/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,26 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/arduino-internal-libs
> cd platformio-examples/atmelavr-and-arduino/arduino-internal-libs
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Build specific environment
> platformio run -e uno
# Upload firmware for the specific environment
> platformio run -e uno --target upload
# Clean build files
> platformio run --target clean

21
examples/atmelavr-and-arduino/arduino-internal-libs/platformio.ini
View File

@@ -17,47 +17,42 @@
# Automatic targets - enable auto-uploading
# targets = upload
[env:arduino_uno]
[env:uno]
platform = atmelavr
framework = arduino
board = uno
[env:arduino_ethernet]
[env:ethernet]
platform = atmelavr
framework = arduino
board = ethernet
[env:arduino_leonardo]
[env:leonardo]
platform = atmelavr
framework = arduino
board = leonardo
[env:arduino_pro16MHzatmega328]
[env:pro16MHzatmega328]
platform = atmelavr
framework = arduino
board = pro16MHzatmega328
[env:arduino_megaatmega1280]
[env:megaatmega1280]
platform = atmelavr
framework = arduino
board = megaatmega1280
[env:arduino_micro]
[env:micro]
platform = atmelavr
framework = arduino
board = micro
[env:arduino_robotControl]
[env:robotControl]
platform = atmelavr
framework = arduino
board = robotControl
[env:arduino_yun]
[env:yun]
platform = atmelavr
framework = arduino
board = yun
[env:arduino_due]
platform = atmelsam
framework = arduino
board = due

1
examples/atmelavr-and-arduino/arduino-internal-libs/src/ChatServer.ino
View File

@@ -17,6 +17,7 @@
*/
#include <Arduino.h>
#include <SPI.h>
#include <Ethernet.h>

4
examples/atmelavr-and-arduino/arduino-own-src_dir/.gitignore vendored
View File

@@ -1 +1,3 @@
.pioenvs
.pioenvs
.clang_complete
.gcc-flags.json

5
examples/atmelavr-and-arduino/arduino-own-src_dir/Blink/Blink.ino
View File

@@ -1,7 +1,4 @@
/**
* Copyright (C) Ivan Kravets <me@ikravets.com>
* See LICENSE for details.
*/
#include <Arduino.h>
#ifndef LED_PIN
#define LED_PIN 13 // Most Arduino boards already have a LED attached to pin 13 on the board itself

11
examples/atmelavr-and-arduino/arduino-own-src_dir/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,20 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/arduino-own-src_dir
> cd platformio-examples/arduino-own-src_dir
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Clean build files
> platformio run --target clean

2
examples/atmelavr-and-arduino/arduino-own-src_dir/platformio.ini
View File

@@ -20,7 +20,7 @@
[platformio]
src_dir = Blink
[env:arduino_uno]
[env:uno]
platform = atmelavr
framework = arduino
board = uno

3
examples/atmelavr-and-arduino/atmelavr-native-blink/.gitignore vendored Normal file
View File

@@ -0,0 +1,3 @@
.pioenvs
.clang_complete
.gcc-flags.json

11
examples/atmelavr-and-arduino/atmelavr-native-blink/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,20 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/atmelavr-native-blink
> cd platformio-examples/atmelavr-and-arduino/atmelavr-native-blink
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Clean build files
> platformio run --target clean

4
examples/atmelavr-and-arduino/digitstump-mouse/.gitignore vendored
View File

@@ -1 +1,3 @@
.pioenvs
.pioenvs
.clang_complete
.gcc-flags.json

17
examples/atmelavr-and-arduino/digitstump-mouse/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,17 +13,26 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/digitstump-mouse
> cd platformio-examples/atmelavr-and-arduino/digitstump-mouse
# Process example project
# Build project
> platformio run
# Upload firmware
> platformio run --target upload
# Build specific environment
> platformio run -e digispark-tiny
# Upload firmware for the specific environment
> platformio run -e digispark-tiny --target upload
# Clean build files
> platformio run --target clean

7
examples/atmelavr-and-arduino/digitstump-mouse/src/Mouse.ino
View File

@@ -2,6 +2,7 @@
// CAUTION!!!! This does click things!!!!!!!!
// Originally created by Sean Murphy (duckythescientist)
#include <Arduino.h>
#include <DigiMouse.h>
void setup() {
@@ -11,7 +12,7 @@ void setup() {
void loop() {
// If not using plentiful DigiMouse.delay(), make sure to call
// DigiMouse.update() at least every 50ms
// move across the screen
// these are signed chars
DigiMouse.moveY(10); //down 10
@@ -20,9 +21,9 @@ void loop() {
DigiMouse.delay(500);
DigiMouse.scroll(5);
DigiMouse.delay(500);
// or DigiMouse.move(X, Y, scroll) works
// three buttons are the three LSBs of an unsigned char
DigiMouse.setButtons(1<<0); //left click
DigiMouse.delay(500);

4
examples/atmelavr-and-arduino/engduino-magnetometer/.gitignore vendored
View File

@@ -1 +1,3 @@
.pioenvs
.pioenvs
.clang_complete
.gcc-flags.json

8
examples/atmelavr-and-arduino/engduino-magnetometer/README.rst
View File

@@ -1,4 +1,4 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
.. Copyright 2014-present Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
@@ -13,16 +13,16 @@ How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
2. Download `source code with examples <https://github.com/platformio/platformio-examples/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/engduino-magnetometer
> cd platformio-examples/atmelavr-and-arduino/engduino-magnetometer
# Process example project
# Build project
> platformio run
# Upload firmware

11
examples/atmelavr-and-arduino/engduino-magnetometer/src/Magnetometer.ino
View File

@@ -1,3 +1,4 @@
#include <Arduino.h>
#include <EngduinoMagnetometer.h>
#include <Wire.h>
@@ -7,12 +8,12 @@
//
void setup()
{
{
EngduinoMagnetometer.begin();
}
void loop()
{
{
float magneticField[3];
// Read magnetic field strength. The values range from -20000
@@ -20,7 +21,7 @@ void loop()
// values
//
EngduinoMagnetometer.xyz(magneticField);
float x = magneticField[0];
float y = magneticField[1];
float z = magneticField[2];
@@ -31,7 +32,7 @@ void loop()
Serial.print(" counts z = ");
Serial.print(z);
Serial.println(" counts");
// Note that this is an uncalibrated temperature
// of the die itself. Whilst it should be a value
// in degrees C, the lack of calibration could mean
@@ -39,6 +40,6 @@ void loop()
int8_t t = EngduinoMagnetometer.temperature();
Serial.print("Temperature: ");
Serial.println(t);
delay(1000);
}

1
examples/atmelavr-and-arduino/panstamp-blink/.gitignore vendored
View File

@@ -1 +0,0 @@
.pioenvs

65
examples/atmelavr-and-arduino/panstamp-blink/.travis.yml
View File

@@ -1,65 +0,0 @@
# Continuous Integration (CI) is the practice, in software
# engineering, of merging all developer working copies with a shared mainline
# several times a day < http://docs.platformio.org/en/latest/ci/index.html >
#
# Documentation:
#
# * Travis CI Embedded Builds with PlatformIO
# < https://docs.travis-ci.com/user/integration/platformio/ >
#
# * PlatformIO integration with Travis CI
# < http://docs.platformio.org/en/latest/ci/travis.html >
#
# * User Guide for `platformio ci` command
# < http://docs.platformio.org/en/latest/userguide/cmd_ci.html >
#
#
# Please choose one of the following templates (proposed below) and uncomment
# it (remove "# " before each line) or use own configuration according to the
# Travis CI documentation (see above).
#
#
# Template #1: General project. Test it using existing `platformio.ini`.
#
# language: python
# python:
# - "2.7"
#
# sudo: false
# cache:
# directories:
# - "~/.platformio"
#
# install:
# - pip install -U platformio
#
# script:
# - platformio run
#
# Template #2: The project is intended to by used as a library with examples
#
# language: python
# python:
# - "2.7"
#
# sudo: false
# cache:
# directories:
# - "~/.platformio"
#
# env:
# - PLATFORMIO_CI_SRC=path/to/test/file.c
# - PLATFORMIO_CI_SRC=examples/file.ino
# - PLATFORMIO_CI_SRC=path/to/test/directory
#
# install:
# - pip install -U platformio
#
# script:
# - platformio ci --lib="." --board=TYPE_1 --board=TYPE_2 --board=TYPE_N

29
examples/atmelavr-and-arduino/panstamp-blink/README.rst
View File

@@ -1,29 +0,0 @@
.. Copyright 2014-2016 Ivan Kravets <me@ikravets.com>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
How to build PlatformIO based project
=====================================
1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
3. Extract ZIP archive
4. Run these commands:
.. code-block:: bash
# Change directory to example
> cd platformio-develop/examples/atmelavr-and-arduino/panstamp-blink
# Process example project
> platformio run
# Upload firmware
> platformio run --target upload

38
examples/atmelavr-and-arduino/panstamp-blink/lib/readme.txt
View File

@@ -1,38 +0,0 @@
This directory is intended for the project specific (private) libraries.
PlatformIO will compile them to static libraries and link to executable file.
The source code of each library should be placed in separate directory, like
"lib/private_lib/[here are source files]".
For example, see how can be organized `Foo` and `Bar` libraries:
|--lib
| |--Bar
| | |--docs
| | |--examples
| | |--src
| | |- Bar.c
| | |- Bar.h
| |--Foo
| | |- Foo.c
| | |- Foo.h
| |- readme.txt --> THIS FILE
|- platformio.ini
|--src
|- main.c
Then in `src/main.c` you should use:
#include <Foo.h>
#include <Bar.h>
// rest H/C/CPP code
PlatformIO will find your libraries automatically, configure preprocessor's
include paths and build them.
See additional options for PlatformIO Library Dependency Finder `lib_*`:
http://docs.platformio.org/en/latest/projectconf.html#lib-install

23
examples/atmelavr-and-arduino/panstamp-blink/platformio.ini
View File

@@ -1,23 +0,0 @@
#
# Project Configuration File
#
# A detailed documentation with the EXAMPLES is located here:
# http://docs.platformio.org/en/latest/projectconf.html
#
# A sign `#` at the beginning of the line indicates a comment
# Comment lines are ignored.
# Simple and base environment
# [env:mybaseenv]
# platform = %INSTALLED_PLATFORM_NAME_HERE%
# framework =
# board =
#
# Automatic targets - enable auto-uploading
# targets = upload
[env:panStampAVR]
platform = atmelavr
framework = arduino
board = panStampAVR

29
examples/atmelavr-and-arduino/panstamp-blink/src/Blink.ino
View File

@@ -1,29 +0,0 @@
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
Most Arduinos have an on-board LED you can control. On the Uno and
Leonardo, it is attached to digital pin 13. If you're unsure what
pin the on-board LED is connected to on your Arduino model, check
the documentation at http://arduino.cc
This example code is in the public domain.
modified 8 May 2014
by Scott Fitzgerald
*/
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}