platformio/platformio-core
1
0
Fork 1
mirror of https://github.com/platformio/platformio-core.git synced 2025-10-31 14:11:39 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
b6269188fe809d80f22bad5141b0945cc81e2cc7
platformio-core/docs/userguide/cmd_device.rst

313 lines
8.0 KiB
ReStructuredText
Raw Blame History

.. Copyright 2014-present PlatformIO <contact@platformio.org>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.. _cmd_device:
platformio device
======================
.. contents::
platformio device list
---------------------------
Usage
~~~~~
.. code-block:: bash
platformio device list [OPTIONS]
Description
~~~~~~~~~~~
List available `Serial Ports <http://en.wikipedia.org/wiki/Serial_port>`_
Options
~~~~~~~
.. program:: platformio device list
.. option::
--json-output
Return the output in `JSON <http://en.wikipedia.org/wiki/JSON>`_ format
Examples
~~~~~~~~
1. Unix OS
.. code-block:: bash
$ platformio device list
/dev/cu.SLAB_USBtoUART
----------
Hardware ID: USB VID:PID=10c4:ea60 SNR=0001
Description: CP2102 USB to UART Bridge Controller
/dev/cu.uart-1CFF4676258F4543
----------
Hardware ID: USB VID:PID=451:f432 SNR=1CFF4676258F4543
Description: Texas Instruments MSP-FET430UIF
2. Windows OS
.. code-block:: bash
$ platformio device list
COM4
----------
Hardware ID: USB VID:PID=0451:F432
Description: MSP430 Application UART (COM4)
COM3
----------
Hardware ID: USB VID:PID=10C4:EA60 SNR=0001
Description: Silicon Labs CP210x USB to UART Bridge (COM3)
.. _cmd_device_monitor:
platformio device monitor
------------------------------
Usage
~~~~~
.. code-block:: bash
platformio device monitor [OPTIONS]
Description
~~~~~~~~~~~
This is a console application that provides a small terminal
application. It is based on `Miniterm <https://pythonhosted.org/pyserial/examples.html#miniterm>`_
and itself does not implement any terminal features such
as *VT102* compatibility. However it inherits these features from the terminal
it is run. For example on GNU/Linux running from an *xterm* it will support the
escape sequences of the *xterm*. On *Windows* the typical console window is dumb
and does not support any escapes. When *ANSI.sys* is loaded it supports some
escapes.
To control *monitor* please use these "hot keys":
* ``Ctrl+]`` Quit
* ``Ctrl+T`` Menu
* ``Ctrl+T followed by Ctrl+H`` Help
Options
~~~~~~~
.. program:: platformio device monitor
.. option::
-p, --port
Port, a number or a device name
.. option::
-b, --baud
Set baud rate, default ``9600``
.. option::
--parity
Set parity (*None, Even, Odd, Space, Mark*), one of
[``N``, ``E``, ``O``, ``S``, ``M``], default ``N``
.. option::
--rtscts
Enable ``RTS/CTS`` flow control, default ``Off``
.. option::
--xonxoff
Enable software flow control, default ``Off``
.. option::
--rts
Set initial ``RTS`` line state, default ``0``
.. option::
--dtr
Set initial ``DTR`` line state, default ``0``
.. option::
--encoding
Set the encoding for the serial port (e.g. ``hexlify``, ``Latin1``, ``UTF-8``),
default ``UTF-8``.
**NEW**: Available in Miniterm/PySerial 3.0
.. option::
-f, --filter
Add text transformation. Available filters:
* ``colorize`` Apply different colors for received and echo
* ``debug`` Print what is sent and received
* ``default`` Remove typical terminal control codes from input
* ``direct`` Do-nothing: forward all data unchanged
* ``nocontrol`` Remove all control codes, incl. CR+LF
* ``printable`` Show decimal code for all non-ASCII characters and replace
most control codes
**NEW**: Available in Miniterm/PySerial 3.0
.. option::
--eol
End of line mode (``CR``, ``LF`` or ``CRLF``), default ``CRLF``
**NEW**: Available in Miniterm/PySerial 3.0
.. option::
--raw
Do not apply any encodings/transformations
**NEW**: Available in Miniterm/PySerial 3.0
.. option::
--exit-char
ASCII code of special character that is used to exit the application,
default ``29`` (DEC).
For example, to use ``Ctrl+Q`` run
``platformio device monitor --exit-char 17``.
.. option::
--menu-char
ASCII code of special character that is used to control miniterm (menu),
default ``20`` (DEC)
.. option::
---quiet
Diagnostics: suppress non-error messages, default ``Off``
.. option::
--echo
Enable local echo, default ``Off``
.. option::
--cr
Do not send ``CR+LF``, send ``R`` only, default ``Off``
**REMOVED**: Is not available in Miniterm/PySerial 3.0
.. option::
--lf
Do not send ``CR+LF``, send ``LF`` only, default ``Off``
**REMOVED**: Is not available in Miniterm/PySerial 3.0
.. option::
-d, --debug
Debug received data (escape non-printable chars). ``--debug`` can be given
multiple times:
0. just print what is received
1. escape non-printable characters, do newlines as unusual
2. escape non-printable characters, newlines too
3. hex dump everything
**REMOVED**: Is not available in Miniterm/PySerial 3.0.
See :option:`platformio device monitor --encoding` and
:option:`platformio device monitor --filter` options.
Examples
~~~~~~~~
1. Show available options for *monitor*
.. code-block:: bash
$ platformio device monitor --help
Usage: platformio device monitor [OPTIONS]
Options:
-p, --port TEXT Port, a number or a device name
-b, --baud INTEGER Set baud rate, default=9600
--parity [N|E|O|S|M] Set parity, default=N
--rtscts Enable RTS/CTS flow control, default=Off
--xonxoff Enable software flow control, default=Off
--rts [0|1] Set initial RTS line state, default=0
--dtr [0|1] Set initial DTR line state, default=0
--echo Enable local echo, default=Off
--encoding TEXT Set the encoding for the serial port (e.g. hexlify,
Latin1, UTF-8), default: UTF-8
-f, --filter TEXT Add text transformation
--eol [CR|LF|CRLF] End of line mode, default=CRLF
--raw Do not apply any encodings/transformations
--exit-char INTEGER ASCII code of special character that is used to exit
the application, default=29 (DEC)
--menu-char INTEGER ASCII code of special character that is used to
control miniterm (menu), default=20 (DEC)
--quiet Diagnostics: suppress non-error messages, default=Off
-h, --help Show this message and exit.
2. Communicate with serial device and print help inside terminal
.. code-block:: bash
$ platformio device monitor
--- Available ports:
--- /dev/cu.Bluetooth-Incoming-Port n/a
--- /dev/cu.Bluetooth-Modem n/a
--- /dev/cu.SLAB_USBtoUART CP2102 USB to UART Bridge Controller
--- /dev/cu.obd2ecu-SPPDev n/a
Enter port name:/dev/cu.SLAB_USBtoUART
--- Miniterm on /dev/cu.SLAB_USBtoUART: 9600,8,N,1 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
Hello PlatformIO!
--- pySerial (2.7) - miniterm - help
---
--- Ctrl+] Exit program
--- Ctrl+T Menu escape key, followed by:
--- Menu keys:
--- Ctrl+T Send the menu character itself to remote
--- Ctrl+] Send the exit character itself to remote
--- Ctrl+I Show info
--- Ctrl+U Upload file (prompt will be shown)
--- Toggles:
--- Ctrl+R RTS Ctrl+E local echo
--- Ctrl+D DTR Ctrl+B BREAK
--- Ctrl+L line feed Ctrl+A Cycle repr mode
---
--- Port settings (Ctrl+T followed by the following):
--- p change port
--- 7 8 set data bits
--- n e o s m change parity (None, Even, Odd, Space, Mark)
--- 1 2 3 set stop bits (1, 2, 1.5)
--- b change baud rate
--- x X disable/enable software flow control
--- r R disable/enable hardware flow control
--- exit ---
Reference in New Issue View Git Blame Copy Permalink