Merge branch 'master' of github.com:ColtonWilley/wolfssl into crl_update_cb

.codespellexcludelines

@@ -0,0 +1,18 @@
+###############################################################################
+# In this file, you should add the line of the file that needs to be ignored.
+# The line should be exactly as it appears in the file.
+###############################################################################
+        0x0b, 0x45, 0x6e, 0x67, 0x69, 0x6e, 0x65, 0x65, /* .Enginee */
+        0x66, 0x6f, 0x40, 0x77, 0x6f, 0x6c, 0x66, 0x73, /* fo@wolfs */
+        0x0a, 0x8b, 0x98, 0xf3, 0xe3, 0xff, 0x4e, 0x44, /* ......ND */
+ot+3i9DAgBkcRcAtjOj4LaR0VknFBbVPFd5uRHg5h6h+u/N5GJG79G+dwfCMNYxd\n\
+static const byte plaintext[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras lacus odio, pretium vel sagittis ac, facilisis quis diam. Vivamus condimentum velit sed dolor consequat interdum. Etiam eleifend ornare felis, eleifend egestas odio vulputate eu. Sed nec orci nunc. Etiam quis mi augue. Donec ullamcorper suscipit lorem, vel luctus augue cursus fermentum. Etiam a porta arcu, in convallis sem. Integer efficitur elementum diam, vel scelerisque felis posuere placerat. Donec vestibulum sit amet leo sit amet tincidunt. Etiam et vehicula turpis. Phasellus quis finibus sapien. Sed et tristique turpis. Nullam vitae sagittis tortor, et aliquet lorem. Cras a leo scelerisque, convallis lacus ut, fermentum urna. Mauris quis urna diam. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam aliquam vehicula orci id pulvinar. Proin mollis, libero sollicitudin tempor ultrices, massa augue tincidunt turpis, sit amet aliquam neque nibh nec dui. Fusce finibus massa quis rutrum suscipit cras amet";
+rsource "Kconfig.tls-generic"
+        /* Loop over authenticated associated data AD1..ADn */
+  /* no easy answer [c'est la vie].  Just division */
+    const uint8_t* hashIn, int hashSz)
+    XMEMCPY(hash + (curveSz - hashSz), hashIn, hashSz);
+        0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, /* creen would be i */
+\pagenumbering{alph}
+    DES3_KEY_SIZE       = 24,  /* 3 des ede               */
+/* functions added to support above needed, removed TOOM and KARATSUBA */

.github/workflows/async.yml

@@ -23,6 +23,7 @@ jobs:
           '--enable-ocsp CFLAGS="-DTEST_NONBLOCK_CERTS"',
         ]
     name: make check
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6

.github/workflows/codespell.yml

@@ -0,0 +1,30 @@
+name: Codespell test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  codespell:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+
+    - uses: codespell-project/actions-codespell@v2.1
+      with:
+        check_filenames: true
+        check_hidden: true
+          # Add comma separated list of words that occur multiple times that should be ignored (sorted alphabetically, case sensitive)
+        ignore_words_list: adin,aNULL,carryIn,chainG,ciph,cLen,cliKs,dout,haveA,inCreated,inOut,inout,larg,LEAPYEAR,Merget,optionA,parm,parms,repid,rIn,userA,ser,siz,te,Te
+          # The exclude_file contains lines of code that should be ignored. This is useful for individual lines which have non-words that can safely be ignored.
+        exclude_file: '.codespellexcludelines'
+          # To skip files entirely from being processed, add it to the following list:
+        skip: '*.cproject,*.der,*.mtpj,*.pem,*.vcxproj,.git,*.launch,*.scfg'

.github/workflows/coverity-scan-fixes.yml

@@ -0,0 +1,53 @@
+name: Coverity Scan master branch
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: '0 0 * * 1-5'
+    - cron: '0 0 * * 0'
+    - cron: '0 12 * * 0'
+
+jobs:
+  coverity:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        ref: master
+
+    - name: Configure wolfSSL with enable-all M-F
+      if: github.event.schedule == '0 0 * * 1-5'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all
+
+    - name: Configure wolfSSL with enable-all enable-smallstack Sun at 00:00
+      if: github.event.schedule == '0 0 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all --enable-smallstack
+
+    - name: Configure wolfSSL with bigendian Sun at 12:00
+      if: github.event.schedule == '0 12 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all CFLAGS="-DBIG_ENDIAN_ORDER"
+
+    - name: Check secrets
+      env:
+        token_var: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email_var: ${{ secrets.COVERITY_SCAN_EMAIL }}
+      run: |
+        token_len=${#token_var}
+        echo "$token_len"
+        email_len=${#email_var}
+        echo "$email_len"
+
+    - uses: vapier/coverity-scan-action@v1
+      with:
+        build_language: 'cxx'
+        project: "wolfSSL/wolfssl"
+        token: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email: ${{ secrets.COVERITY_SCAN_EMAIL }}
+        command: "make"

.github/workflows/curl.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -38,6 +39,7 @@ jobs:
 
   test_curl:
     name: ${{ matrix.curl_ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 15
@@ -50,8 +52,7 @@ jobs:
     - name: Install test dependencies
       run: |
         sudo apt-get update
-        sudo apt-get install nghttp2 libpsl5 libpsl-dev
+        sudo apt-get install nghttp2 libpsl5 libpsl-dev python3-impacket
-        sudo pip install impacket
 
     - name: Download lib
       uses: actions/download-artifact@v4

.github/workflows/cyrus-sasl.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -46,6 +47,7 @@ jobs:
         # List of releases to test
         ref: [ 2.1.28 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4

.github/workflows/disabled/haproxy.yml

@@ -20,6 +20,7 @@ jobs:
         # List of refs to test
         ref: [ master ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     steps:
       - name: Build wolfSSL

.github/workflows/disabled/hostap.yml

@@ -22,6 +22,7 @@ jobs:
           - build_id: hostap-build2
             wolf_extra_config: --enable-brainpool --enable-wpas-dpp
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.
@@ -99,6 +100,7 @@ jobs:
               build_id: hostap-build2
             }
     name: hwsim test
+    if: github.repository_owner == 'wolfssl'
     # For openssl 1.1
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.

.github/workflows/docker-Espressif.yml

@@ -14,6 +14,7 @@ concurrency:
 jobs:
   espressif_latest:
     name: latest Docker container
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 12
@@ -25,6 +26,7 @@ jobs:
         run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v4_4:
     name: v4.4 Docker container
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     container:
       image: espressif/idf:release-v4.4
@@ -34,6 +36,7 @@ jobs:
         run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v5_0:
     name: v5.0 Docker container
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     container:
       image: espressif/idf:release-v5.0

.github/workflows/docker-OpenWrt.yml

@@ -17,6 +17,7 @@ concurrency:
 jobs:
     build_library:
         name: Compile libwolfssl.so
+        if: github.repository_owner == 'wolfssl'
         runs-on: ubuntu-latest
         # This should be a safe limit for the tests to run.
         timeout-minutes: 4
@@ -40,6 +41,7 @@ jobs:
                 retention-days: 5
     compile_container:
         name: Compile container
+        if: github.repository_owner == 'wolfssl'
         runs-on: ubuntu-latest
         # This should be a safe limit for the tests to run.
         timeout-minutes: 2

.github/workflows/grpc.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -50,6 +51,7 @@ jobs:
               test_core_security_ssl_credentials_test test_cpp_end2end_ssl_credentials_test
               h2_ssl_cert_test h2_ssl_session_reuse_test
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 30

.github/workflows/hitch.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -47,6 +48,7 @@ jobs:
             ignore-tests: >-
               test13-r82.sh test15-proxy-v2-npn.sh test39-client-cert-proxy.sh
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4

.github/workflows/hostap-vm.yml

@@ -27,6 +27,7 @@ jobs:
               --enable-wpas-dpp --enable-brainpool --with-eccminsz=192
               --enable-tlsv10 --enable-oldtls
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
@@ -64,6 +65,7 @@ jobs:
 
   build_uml_linux:
     name: Build UML (UserMode Linux)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
@@ -140,6 +142,7 @@ jobs:
             }
     name: hwsim test
     # For openssl 1.1
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 45
@@ -193,8 +196,7 @@ jobs:
           # hostap dependencies
           sudo apt-get install -y libpcap0.8 libpcap-dev curl libcurl4-openssl-dev \
             libnl-3-dev binutils-dev libssl-dev libiberty-dev libnl-genl-3-dev \
-            libnl-route-3-dev libdbus-1-dev bridge-utils tshark
+            libnl-route-3-dev libdbus-1-dev bridge-utils tshark python3-pycryptodome
-          sudo pip3 install pycryptodome
 
       - name: Checkout hostap
         uses: actions/checkout@v4

.github/workflows/ipmitool.yml

@@ -18,6 +18,7 @@ jobs:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -46,9 +47,12 @@ jobs:
       matrix:
         git_ref: [ c3939dac2c060651361fc71516806f9ab8c38901 ]
     name: ${{ matrix.git_ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     needs: build_wolfssl
     steps:
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y libreadline8
       - name: Download lib
         uses: actions/download-artifact@v4
         with:

.github/workflows/jwt-cpp.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -40,12 +41,17 @@ jobs:
           retention-days: 5
 
   build_pam-ipmi:
+    if: github.repository_owner == 'wolfssl'
     strategy:
       fail-fast: false
       matrix:
-        ref: [ 0.6.0 ]
+        config:
-    name: ${{ matrix.ref }}
+          - ref: 0.7.0
-    runs-on: ubuntu-latest
+            runner: ubuntu-latest
+          - ref: 0.6.0
+            runner: ubuntu-22.04
+    name: ${{ matrix.config.ref }}
+    runs-on: ${{ matrix.config.runner }}
     needs: build_wolfssl
     steps:
       - name: Install dependencies
@@ -74,12 +80,12 @@ jobs:
         with:
           repository: Thalhammer/jwt-cpp
           path: jwt-cpp
-          ref: v${{ matrix.ref }}
+          ref: v${{ matrix.config.ref }}
 
       - name: Build pam-ipmi
         working-directory: jwt-cpp
         run: |
-          patch -p1 < ../osp/jwt-cpp/${{ matrix.ref }}.patch
+          patch -p1 < ../osp/jwt-cpp/${{ matrix.config.ref }}.patch
           PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
             cmake -B build -DJWT_SSL_LIBRARY:STRING=wolfSSL -DJWT_BUILD_TESTS=ON .
           make -j -C build

.github/workflows/krb5.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 5
@@ -48,6 +49,7 @@ jobs:
         # List of releases to test
         ref: [ 1.21.1 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8

.github/workflows/libssh2.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -45,6 +46,7 @@ jobs:
         # List of releases to test
         ref: [ 1.11.0 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8

.github/workflows/libvncserver.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -45,6 +46,7 @@ jobs:
       matrix:
         ref: [ 0.9.13 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     needs: build_wolfssl
     steps:

.github/workflows/memcached.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     steps:
       - name: Build wolfSSL
@@ -46,6 +47,7 @@ jobs:
         include:
           - ref: 1.6.22
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     needs: build_wolfssl
     steps:

.github/workflows/mosquitto.yml

@@ -16,6 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -43,6 +44,7 @@ jobs:
       matrix:
         ref: [ 2.0.18 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -66,8 +68,7 @@ jobs:
         run: |
             export DEBIAN_FRONTEND=noninteractive
             sudo apt-get update
-            sudo apt-get install -y build-essential libev-dev libssl-dev automake python3-docutils libcunit1 libcunit1-doc libcunit1-dev pkg-config make
+            sudo apt-get install -y build-essential libev-dev libssl-dev automake python3-docutils libcunit1 libcunit1-doc libcunit1-dev pkg-config make python3-psutil
-            sudo pip install --upgrade psutil
 
       - name: Checkout mosquitto
         uses: actions/checkout@v4

.github/workflows/multi-arch.yml

@@ -36,6 +36,7 @@ jobs:
             CFLAGS: -marm -DWOLFSSL_SP_ARM_ARCH=6
             ARCH: armel
             EXTRA_OPTS: --enable-sp-asm
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10

.github/workflows/multi-compiler.yml

@@ -46,10 +46,13 @@ jobs:
           - CC: clang-14
             CXX: clang++-14
             OS: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.OS }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y ${{ matrix.CC }}
       - uses: actions/checkout@v4
       - name: Build
         env:

.github/workflows/net-snmp.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -46,6 +47,7 @@ jobs:
           - ref: 5.9.3
             test_opts: -e 'agentxperl'
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4

.github/workflows/nginx.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -105,6 +106,7 @@ jobs:
               stream_proxy_protocol_ssl.t stream_proxy_ssl_conf_command.t stream_proxy_ssl.t
               stream_proxy_ssl_verify.t
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6

.github/workflows/no-malloc.yml

@@ -21,6 +21,7 @@ jobs:
           '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC -DRSA_MIN_SIZE=1024"',
         ]
     name: make check
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6

.github/workflows/ntp.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -45,6 +46,7 @@ jobs:
         # List of releases to test
         ref: [ 4.2.8p15 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10

.github/workflows/ocsp.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   ocsp_stapling:
     name: ocsp stapling
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     timeout-minutes: 10
     steps:

.github/workflows/openssh.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -47,6 +48,7 @@ jobs:
           - git_ref: 'V_9_6_P1'
             osp_ver: '9.6'
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     needs: build_wolfssl
     steps:

.github/workflows/openvpn.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -42,8 +43,9 @@ jobs:
       fail-fast: false
       matrix:
         # List of refs to test
-        ref: [ release/2.6, v2.6.0, master ]
+        ref: [ release/2.6, master ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10

.github/workflows/os-check.yml

@@ -38,8 +38,11 @@ jobs:
           '--enable-all --enable-dtls13 --enable-dtls-frag-ch',
           '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
            --enable-dtls-mtu',
+          '--enable-dtls --enable-dtlscid --enable-dtls13 --enable-secure-renegotiation
+            --enable-psk --enable-aesccm --enable-nullcipher CPPFLAGS=-DWOLFSSL_STATIC_RSA',
         ]
     name: make check
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -60,6 +63,7 @@ jobs:
           'examples/configs/user_settings_all.h',
         ]
     name: make user_setting.h
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -85,6 +89,7 @@ jobs:
           'examples/configs/user_settings_tls12.h',
         ]
     name: make user_setting.h (testwolfcrypt only)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -106,6 +111,7 @@ jobs:
       matrix:
         os: [ ubuntu-latest, macos-latest ]
     name: make user_setting.h (with sed)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -124,7 +130,12 @@ jobs:
 
   windows_build:
     name: Windows Build Test
+    if: github.repository_owner == 'wolfssl'
     runs-on: windows-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [ x64, Win32, ARM64 ]
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     env:
@@ -135,7 +146,6 @@ jobs:
       # You can convert this to a build matrix if you need coverage of multiple configuration types.
       # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
       BUILD_CONFIGURATION: Release
-      BUILD_PLATFORM: x64
     steps:
     - uses: actions/checkout@v4
 
@@ -150,8 +160,9 @@ jobs:
       working-directory: ${{env.GITHUB_WORKSPACE}}
       # Add additional options to the MSBuild command line here (like platform or verbosity level).
       # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{matrix.arch}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
 
-    - name: Run Test
+    - if: ${{ matrix.arch != 'ARM64' }}
+      name: Run Test
       working-directory: ${{env.GITHUB_WORKSPACE}}
-      run: Release/x64/testsuite.exe
+      run: Release/${{matrix.arch}}/testsuite.exe

.github/workflows/packaging.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Package wolfSSL
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10

.github/workflows/pam-ipmi.yml

@@ -16,6 +16,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -46,6 +47,7 @@ jobs:
       matrix:
         git_ref: [ e4b13e6725abb178f62ee897fe1c0e81b06a9431 ]
     name: ${{ matrix.git_ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     needs: build_wolfssl
     steps:
@@ -54,8 +56,7 @@ jobs:
           # Don't prompt for anything
           export DEBIAN_FRONTEND=noninteractive
           sudo apt-get update
-          sudo apt-get install libpam-dev ninja-build
+          sudo apt-get install libpam-dev ninja-build meson
-          sudo pip3 install meson
 
       - name: Download lib
         uses: actions/download-artifact@v4

.github/workflows/rng-tools.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -45,6 +46,7 @@ jobs:
         # List of releases to test
         ref: [ 6.16 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4

.github/workflows/socat.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     timeout-minutes: 4
     steps:
@@ -37,8 +38,7 @@ jobs:
 
 
   socat_check:
-    strategy:
+    if: github.repository_owner == 'wolfssl'
-      fail-fast: false
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 30

.github/workflows/softhsm.yml

@@ -0,0 +1,94 @@
+name: SoftHSMv2 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all CFLAGS=-DRSA_MIN_SIZE=1024
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-softhsm
+          path: build-dir.tgz
+          retention-days: 5
+
+  softhsm_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.6.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y libcppunit-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-softhsm
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout SoftHSMv2
+        uses: actions/checkout@v4
+        with:
+          repository: opendnssec/SoftHSMv2
+          path: softhsm
+          ref: ${{ matrix.ref }}
+
+      # Not using wolfSSL/actions-build-autotools-project@v1 because autogen.sh doesn't work
+      - name: Build softhsm
+        working-directory: softhsm
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/softhsm/${{ matrix.ref }}.patch
+          autoreconf -if
+          ./configure --with-crypto-backend=wolfssl WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
+          make -j
+
+      - name: Test softhsm
+        working-directory: softhsm
+        run: make -j check

.github/workflows/sssd.yml

@@ -14,6 +14,7 @@ concurrency:
 
 jobs:
   build_wolfssl:
+    if: github.repository_owner == 'wolfssl'
     name: Build wolfSSL
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
@@ -39,6 +40,7 @@ jobs:
           retention-days: 5
 
   sssd_check:
+    if: github.repository_owner == 'wolfssl'
     strategy:
       fail-fast: false
       matrix:

.github/workflows/stunnel.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -44,6 +45,7 @@ jobs:
         # List of releases to test
         ref: [ 5.67 ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4

.github/workflows/win-csharp-test.yml

@@ -0,0 +1,58 @@
+name: Windows CSharp Build Test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    if: github.repository_owner == 'wolfssl'
+    runs-on: windows-latest
+
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+
+    env:
+      # Path to the solution file relative to the root of the project.
+      SOLUTION_FILE_PATH: wolfssl\wrapper\CSharp\wolfSSL_CSharp.sln
+
+      # Configuration type to build.
+      # You can convert this to a build matrix if you need coverage of multiple configuration types.
+      # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
+      BUILD_CONFIGURATION: Debug
+      BUILD_PLATFORM: x64
+
+    steps:
+        - name: Pull wolfssl
+          uses: actions/checkout@master
+          with:
+            repository: wolfssl/wolfssl
+            path: wolfssl
+
+        - name: Create FIPS stub files (autogen)
+          working-directory: wolfssl
+          run: |
+            echo $null >> wolfcrypt\src\fips.c
+            echo $null >> wolfcrypt\src\fips_test.c
+            echo $null >> wolfcrypt\src\wolfcrypt_first.c
+            echo $null >> wolfcrypt\src\wolfcrypt_last.c
+
+        - name: Add MSBuild to PATH
+          uses: microsoft/setup-msbuild@v1
+
+        - name: Build
+          working-directory: ${{env.GITHUB_WORKSPACE}}
+          # Add additional options to the MSBuild command line here (like platform or verbosity level).
+          # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
+          run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+
+        - name: Run wolfCrypt test
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfCrypt-test.exe
+
+        - name: Run wolfSSL client/server example
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfSSL-TLS-Server.exe && sleep 1 & ./wolfSSL-TLS-Client.exe

.github/workflows/zephyr.yml

@@ -25,6 +25,7 @@ jobs:
             zephyr-sdk: 0.16.3
           - zephyr-ref: v2.7.4
             zephyr-sdk: 0.16.3
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 25
@@ -45,7 +46,7 @@ jobs:
             libglib2.0-dev libgtk2.0-0 liblocale-gettext-perl libncurses5-dev libpcap-dev \
             libpopt0 libsdl1.2-dev libsdl2-dev libssl-dev libtool libtool-bin locales make \
             net-tools ninja-build openssh-client parallel pkg-config python3-dev python3-pip \
-            python3-ply python3-setuptools python-is-python3 qemu rsync socat srecord sudo \
+            python3-ply python3-setuptools python-is-python3 qemu-kvm rsync socat srecord sudo \
             texinfo unzip wget ovmf xz-utils
 
       - name: Install west

.gitignore

@@ -10,6 +10,7 @@ ctaocrypt/src/src/
 *.cache
 .dirstamp
 *.user
+!*-VS2022.vcxproj.user
 configure
 config.*
 !cmake/config.in
@@ -245,6 +246,7 @@ linuxkm/libwolfssl.mod.c
 linuxkm/libwolfssl.lds
 linuxkm/module_exports.c
 linuxkm/linuxkm/get_thread_size
+*.nds
 
 # autotools generated
 scripts/unit.test

CMakeLists.txt

@@ -34,7 +34,7 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
      You must delete them, or cmake will refuse to work.")
 endif()
 
-project(wolfssl VERSION 5.7.2 LANGUAGES C ASM)
+project(wolfssl VERSION 5.7.4 LANGUAGES C ASM)
 
 # Set WOLFSSL_ROOT if not already defined
 if ("${WOLFSSL_ROOT}" STREQUAL "")
@@ -53,7 +53,7 @@ set(WOLFSSL_LIBRARY_VERSION_FIRST 42)
 
 # increment if interfaces have been added
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented
-set(WOLFSSL_LIBRARY_VERSION_SECOND 2)
+set(WOLFSSL_LIBRARY_VERSION_SECOND 3)
 
 # increment if source code has changed
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented or
@@ -131,6 +131,7 @@ check_type_size("__uint128_t" __UINT128_T)
 check_type_size("long long" SIZEOF_LONG_LONG)
 check_type_size("long" SIZEOF_LONG)
 check_type_size("time_t" SIZEOF_TIME_T)
+check_type_size("uintptr_t" HAVE_UINTPTR_T)
 
 # By default, HAVE___UINT128_T gets defined as TRUE,
 # but we want it as 1.
@@ -419,16 +420,17 @@ if(WOLFSSL_CURL)
     set(WOLFSSL_MD4 "yes")
     set(WOLFSSL_DES3 "yes")
     set(WOLFSSL_ALPN "yes")
+    set(WOLFSSL_WOLFSSH "yes")
     set(WOLFSSL_OPENSSLEXTRA "yes")
     set(WOLFSSL_CRL "yes")
     set(WOLFSSL_OCSP "yes")
     set(WOLFSSL_OCSPSTAPLING "yes")
     set(WOLFSSL_OCSPSTAPLING_V2 "yes")
+    # Note: OCSP sets requisite HAVE_TLS_EXTENSIONS and HAVE_CERTIFICATE_STATUS_REQUEST(_V2)
     set(WOLFSSL_SNI "yes")
     set(WOLFSSL_ALT_CERT_CHAINS "yes")
     set(WOLFSSL_IP_ALT_NAME "yes")
     set(WOLFSSL_SESSION_TICKET "yes")
-    set(WOLFSSL_WOLFSSH "yes")
     list(APPEND WOLFSSL_DEFINITIONS
         "-DNO_SESSION_CACHE_REF" "-DWOLFSSL_DES_ECB")
 endif()

ChangeLog.md

@@ -1,3 +1,196 @@
+# wolfSSL Release 5.7.4 (Oct 24, 2024)
+
+Release 5.7.4 has been developed according to wolfSSL's development and QA
+process (see link below) and successfully passed the quality criteria.
+https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
+
+NOTE: * --enable-heapmath is being deprecated and will be removed by end of 2024
+
+PR stands for Pull Request, and PR <NUMBER> references a GitHub pull request
+ number where the code change was added.
+
+
+## Vulnerabilities
+* [Low] When the OpenSSL compatibility layer is enabled, certificate
+ verification behaved differently in wolfSSL than OpenSSL, in the
+ X509_STORE_add_cert() and X509_STORE_load_locations() implementations.
+ Previously, in cases where an application explicitly loaded an intermediate
+ certificate, wolfSSL was verifying only up to that intermediate certificate,
+ rather than verifying up to the root CA. This only affects use cases where the
+ API is called directly, and does not affect TLS connections. Users that call
+ the API X509_STORE_add_cert() or X509_STORE_load_locations() directly in their
+ applications are recommended to update the version of wolfSSL used or to have
+ additional sanity checks on certificates loaded into the X509_STORE when
+ verifying a certificate. (https://github.com/wolfSSL/wolfssl/pull/8087)
+
+
+## PQC TLS Experimental Build Fix
+* When using TLS with post quantum algorithms enabled, the connection uses a
+ smaller EC curve than agreed on. Users building with --enable-experimental and
+ enabling PQC cipher suites with TLS connections are recommended to update the
+ version of wolfSSL used. Thanks to Daniel Correa for the report.
+ (https://github.com/wolfSSL/wolfssl/pull/8084)
+
+
+## New Feature Additions
+* RISC-V 64 new assembly optimizations added for SHA-256, SHA-512, ChaCha20,
+ Poly1305, and SHA-3 (PR 7758,7833,7818,7873,7916)
+* Implement support for Connection ID (CID) with DTLS 1.2 (PR 7995)
+* Add support for (DevkitPro)libnds (PR 7990)
+* Add port for Mosquitto OSP (Open Source Project) (PR 6460)
+* Add port for init sssd (PR 7781)
+* Add port for eXosip2 (PR 7648)
+* Add support for STM32G4 (PR 7997)
+* Add support for MAX32665 and MAX32666 TPU HW and ARM ASM Crypto Callback
+ Support (PR 7777)
+* Add support for building wolfSSL to be used in libspdm (PR 7869)
+* Add port for use with Nucleus Plus 2.3 (PR 7732)
+* Initial support for RFC5755 x509 attribute certificates (acerts). Enabled with
+ --enable-acert (PR 7926)
+* PKCS#11 RSA Padding offload allows tokens to perform CKM_RSA_PKCS
+ (sign/encrypt), CKM_RSA_PKCS_PSS (sign), and CKM_RSA_PKCS_OAEP (encrypt).
+ (PR 7750)
+* Added “new” and “delete” style functions for heap/pool allocation and freeing
+ of low level crypto structures (PR 3166 and 8089)
+
+
+## Enhancements and Optimizations
+* Increase default max alt. names from 128 to 1024 (PR 7762)
+* Added new constant time DH agree function wc_DhAgree_ct (PR 7802)
+* Expanded compatibility layer with the API EVP_PKEY_is_a (PR 7804)
+* Add option to disable cryptocb test software test using
+ --disable-cryptocb-sw-test (PR 7862)
+* Add a call to certificate verify callback before checking certificate dates
+ (PR 7895)
+* Expanded algorithms supported with the wolfCrypt CSharp wrapper. Adding
+ support for RNG, ECC(ECIES and ECDHE), RSA, ED25519/Curve25519, AES-GCM, and
+ Hashing (PR 3166)
+* Expand MMCAU support for use with DES ECB (PR 7960)
+* Update AES SIV to handle multiple associated data inputs (PR 7911)
+* Remove HAVE_NULL_CIPHER from --enable-openssh (PR 7811)
+* Removed duplicate if(NULL) checks when calling XFREE (macro does) (PR 7839)
+* Set RSA_MIN_SIZE default to 2048 bits (PR 7923)
+* Added support for wolfSSL to be used as the default TLS in the zephyr kernel
+ (PR 7731)
+* Add enable provider build using --enable-wolfprovider with autotools (PR 7550)
+* Renesas RX TSIP ECDSA support (PR 7685)
+* Support DTLS1.3 downgrade when the server supports CID (PR 7841)
+* Server-side checks OCSP even if it uses v2 multi (PR 7828)
+* Add handling of absent hash params in PKCS7 bundle parsing and creation
+ (PR 7845)
+* Add the use of w64wrapper for Poly1305, enabling Poly1305 to be used in
+ environments that do not have a word64 type (PR 7759)
+* Update to the maxq10xx support (PR 7824)
+* Add support for parsing over optional PKCS8 attributes (PR 7944)
+* Add support for either side method with DTLS 1.3 (PR 8012)
+* Added PKCS7 PEM support for parsing PEM data with BEGIN/END PKCS7 (PR 7704)
+* Add CMake support for WOLFSSL_CUSTOM_CURVES (PR 7962)
+* Add left-most wildcard matching support to X509_check_host() (PR 7966)
+* Add option to set custom SKID with PKCS7 bundle creation (PR 7954)
+* Building wolfSSL as a library with Ada and corrections to Alire manifest
+ (PR 7303,7940)
+* Renesas RX72N support updated (PR 7849)
+* New option WOLFSSL_COPY_KEY added to always copy the key to the SSL object
+ (PR 8005)
+* Add the new option WOLFSSL_COPY_CERT to always copy the cert buffer for each
+ SSL object (PR 7867)
+* Add an option to use AES-CBC with HMAC for default session ticket enc/dec.
+ Defaults to AES-128-CBC with HMAC-SHA256 (PR 7703)
+* Memory usage improvements in wc_PRF, sha256 (for small code when many
+ registers are available) and sp_int objects (PR 7901)
+* Change in the configure script to work around ">>" with no command. In older
+ /bin/sh it can be ambiguous, as used in OS’s such as FreeBSD 9.2 (PR 7876)
+* Don't attempt to include system headers when not required (PR 7813)
+* Certificates: DER encoding of ECC signature algorithm parameter is now
+ allowed to be NULL with a define (PR 7903)
+* SP x86_64 asm: check for AVX2 support for VMs (PR 7979)
+* Update rx64n support on gr-rose (PR 7889)
+* Update FSP version to v5.4.0 for RA6M4 (PR 7994)
+* Update TSIP driver version to v1.21 for RX65N RSK (PR 7993)
+* Add a new crypto callback for RSA with padding (PR 7907)
+* Replaced the use of pqm4 with wolfSSL implementations of Kyber/MLDSA
+ (PR 7924)
+* Modernized memory fence support for C11 and clang (PR 7938)
+* Add a CRL error override callback (PR 7986)
+* Extend the X509 unknown extension callback for use with a user context
+ (PR 7730)
+* Additional debug error tracing added with TLS (PR 7917)
+* Added runtime support for library call stack traces with
+ –enable-debug-trace-errcodes=backtrace, using libbacktrace (PR 7846)
+* Expanded C89 conformance (PR 8077)
+* Expanded support for WOLFSSL_NO_MALLOC (PR 8065)
+* Added support for cross-compilation of Linux kernel module (PR 7746)
+* Updated Linux kernel module with support for kernel 6.11 and 6.12 (PR 7826)
+* Introduce WOLFSSL_ASN_ALLOW_0_SERIAL to allow parsing of certificates with a
+ serial number of 0 (PR 7893)
+* Add conditional repository_owner to all wolfSSL GitHub workflows (PR 7871)
+
+### Espressif / Arduino Updates
+* Update wolfcrypt settings.h for Espressif ESP-IDF, template update (PR 7953)
+* Update Espressif sha, util, mem, time helpers (PR 7955)
+* Espressif _thread_local_start and _thread_local_end fix (PR 8030)
+* Improve benchmark for Espressif devices (PR 8037)
+* Introduce Espressif common CONFIG_WOLFSSL_EXAMPLE_NAME, Kconfig (PR 7866)
+* Add wolfSSL esp-tls and Certificate Bundle Support for Espressif ESP-IDF
+ (PR 7936)
+* Update wolfssl Release for Arduino (PR 7775)
+
+### Post Quantum Crypto Updates
+* Dilithium: support fixed size arrays in dilithium_key (PR 7727)
+* Dilithium: add option to use precalc with small sign (PR 7744)
+* Allow Kyber to be built with FIPS (PR 7788)
+* Allow Kyber asm to be used in the Linux kernel module (PR 7872)
+* Dilithium, Kyber: Update to final specification (PR 7877)
+* Dilithium: Support FIPS 204 Draft and Final Draft (PR 7909,8016)
+
+### ARM Assembly Optimizations
+* ARM32 assembly optimizations added for ChaCha20 and Poly1305 (PR 8020)
+* Poly1305 assembly optimizations improvements for Aarch64 (PR 7859)
+* Poly1305 assembly optimizations added for Thumb-2 (PR 7939)
+* Adding ARM ASM build option to STM32CubePack (PR 7747)
+* Add ARM64 to Visual Studio Project (PR 8010)
+* Kyber assembly optimizations for ARM32 and Aarch64 (PR 8040,7998)
+* Kyber assembly optimizations for ARMv7E-M/ARMv7-M (PR 7706)
+
+
+## Fixes
+* ECC key load: fixes for certificates with parameters that are not default for
+ size (PR 7751)
+* Fixes for building x86 in Visual Studio for non-windows OS (PR 7884)
+* Fix for TLS v1.2 secret callback, incorrectly detecting bad master secret
+ (PR 7812)
+* Fixes for PowerPC assembly use with Darwin and SP math all (PR 7931)
+* Fix for detecting older versions of Mac OS when trying to link with
+ libdispatch (PR 7932)
+* Fix for DTLS1.3 downgrade to DTLS1.2 when the server sends multiple handshake
+ packets combined into a single transmission. (PR 7840)
+* Fix for OCSP to save the request if it was stored in ssl->ctx->certOcspRequest
+ (PR 7779)
+* Fix to OCSP for searching for CA by key hash instead of ext. key id (PR 7934)
+* Fix for staticmemory and singlethreaded build (PR 7737)
+* Fix to not allow Shake128/256 with Xilinx AFALG (PR 7708)
+* Fix to support PKCS11 without RSA key generation (PR 7738)
+* Fix not calling the signing callback when using PK callbacks + TLS 1.3
+ (PR 7761)
+* Cortex-M/Thumb2 ASM fix label for IAR compiler (PR 7753)
+* Fix with PKCS11 to iterate correctly over slotId (PR 7736)
+* Stop stripping out the sequence header on the AltSigAlg extension (PR 7710)
+* Fix ParseCRL_AuthKeyIdExt with ASN template to set extAuthKeyIdSet value
+ (PR 7742)
+* Use max key length for PSK encrypt buffer size (PR 7707)
+* DTLS 1.3 fix for size check to include headers and CID fixes (PR 7912,7951)
+* Fix STM32 Hash FIFO and add support for STM32U5A9xx (PR 7787)
+* Fix CMake build error for curl builds (PR 8021)
+* SP Maths: PowerPC ASM fix to use XOR instead of LI (PR 8038)
+* SSL loading of keys/certs: testing and fixes (PR 7789)
+* Misc. fixes for Dilithium and Kyber (PR 7721,7765,7803,8027,7904)
+* Fixes for building wolfBoot sources for PQ LMS/XMSS (PR 7868)
+* Fixes for building with Kyber enabled using CMake and zephyr port (PR 7773)
+* Fix for edge cases with session resumption with TLS 1.2 (PR 8097)
+* Fix issue with ARM ASM with AES CFB/OFB not initializing the "left" member
+ (PR 8099)
+
+
 # wolfSSL Release 5.7.2 (July 08, 2024)
 
 Release 5.7.2 has been developed according to wolfSSL's development and QA

Docker/Dockerfile

@@ -10,7 +10,7 @@ ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev
 ARG DEPS_LIBOQS="astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind git"
 ARG DEPS_UDP_PROXY="wget libevent-dev"
 ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev python3-virtualenv curl jq"
-ARG DEPS_TOOLS="ccache clang-tidy maven"
+ARG DEPS_TOOLS="ccache clang-tidy maven libfile-util-perl android-tools-adb usbutils shellcheck"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
                     && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_UDP_PROXY} ${DEPS_TESTS} ${DEPS_TOOLS} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*

IDE/Espressif/ESP-IDF/README.md

@@ -1,11 +1,12 @@
 # ESP-IDF Port
 
 These Espressif examples have been created and tested with the latest stable release branch of
-[ESP-IDF V5.2](https://docs.espressif.com/projects/esp-idf/en/release-v5.2/esp32/get-started/index.html).
+ESP-IDF v5.2, v5.3 and the master branch
-The prior version 4.4 ESP-IDF is still supported, however version 5.2 or greater is recommended.
-Espressif has [a list of all ESP-IDF versions](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/versions.html).
 
-See the latest [Espressif Migration Guides](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/migration-guides/index.html).
+The prior version 4.4 ESP-IDF is still supported, however version 5.2 or greater is recommended.
+Espressif has [a list of all ESP-IDF versions](Espressifversions.html).
+
+See the latest Espressif Migration Guides.
 
 ## Examples
 
@@ -34,7 +35,7 @@ looks for the wolfSSL `user_settings.h` in the project as described below.
 ### File: `sdkconfig.h`
 
 The Espressif `sdkconfig.h`, generated automatically from your `sdkconfig`
-file at [build](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html)
+file at [build](Espressif api-guides/build-system.html)
 time, should be included before any other files.
 
 ### File: `user_settings.h`
@@ -101,7 +102,7 @@ of your source code, particularly before the `#include <wolfssl/wolfcrypt/settin
 
 ## Requirements
 
- 1. [ESP-IDF development framework](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/)
+ 1. [ESP-IDF development framework](https://github.com/espressif/esp-idf)
 
 ## wolfSSL as an Espressif component
 
@@ -113,7 +114,7 @@ There are various methods available for using wolfSSL as a component:
 
 ## Espressif Managed Components
 
-Visit https://components.espressif.com/components/wolfssl/wolfssl and see the instructions. Typically:
+Visit https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/ and see the instructions. Typically:
 
 ```
 idf.py add-dependency "wolfssl/wolfssl^5.6.0-stable"
@@ -144,6 +145,14 @@ This is an alternate method for installation. It is recommended to use the new `
  2. Find Wolfssl files at _/path/to/esp_`/esp-idf/components/wolfssl/`
  3. Find [Example Programs](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples) under _/path/to/esp_`/esp-idf/examples/protocols/wolfssl_xxx` (where xxx is the project name)
 
+
+```
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+. $WRK_IDF_PATH/export.sh
+
+./setup.sh
+```
+
 ## Setup for Windows
 
 This is an alternate method for installation. It is recommended to use the new `CMakeLists.txt` to point to wolfSSL source code.
@@ -188,8 +197,8 @@ C:\SysGCC\esp32\esp-idf>git clone -b v5.0.2 --recursive https://github.com/espre
    - Microsoft Windows 10 Pro 10.0.19041 / Windows 11 Pro 22H2 22621.2715
    - Visual Studio 2022 17.7.6 with VisualGDB 5.6R9 (build 4777)
    - WSL 1 Ubuntu 22.04.3 LTS
-   - ESP-IDF: ESP-IDF v5.1
+   - ESP-IDF: ESP-IDF v5.2
-   - SoC Module : all those supported in ESP-IDF v5.1
+   - SoC Module : all those supported in ESP-IDF v5.2
 
 ## JTAG Debugging Notes
 
@@ -226,3 +235,15 @@ ftdi layout_signal nSRST -data 0x0020
 reset_config srst_push_pull trst_push_pull
 
 ```
+
+## Windows long paths
+
+Check "Long Paths Enabled" in Windows registry.
+
+Please set registry HKLM\SYSTEM\CurrentControlSet\Control\FileSystem\LongPathsEnabled to 1.
+
+The operation requires Administrator privileges. Command:
+
+```powershell
+powershell -Command "&{ Start-Process -FilePath reg 'ADD HKLM\SYSTEM\CurrentControlSet\Control\FileSystem /v LongPathsEnabled /t REG_DWORD /d 1 /f' -Verb runAs}"
+```

IDE/Espressif/ESP-IDF/README_32se.md

@@ -10,7 +10,7 @@ Including the following examples:
  The `user_settings.h` file enables some of the hardened settings.
 
 ## Requirements
-1. ESP-IDF development framework: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
+1. ESP-IDF development framework: https://github.com/espressif/esp-idf
 
 2. Microchip CryptoAuthentication Library: https://github.com/MicrochipTech/cryptoauthlib
 

IDE/Espressif/ESP-IDF/examples/README.md

@@ -78,7 +78,7 @@ wolfSSL to be installed.
 If you want to install wolfSSL, see the setup for [wolfSSL](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF#setup-for-linux)
 and [wolfSSH](https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif#setup-for-linux).
 
-The [Espressif Managed Component for wolfSSL](https://components.espressif.com/components/wolfssl/wolfssl)
+The [Espressif Managed Component for wolfSSL](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/)
 also installs source code locally, instead of pointing to a source repository.
 
 ## VisualGDB
@@ -114,7 +114,4 @@ It may be helpful to also delete the `sdkconfig` file. (Save a backup if you've
 
 - esp32.com: [GPIO6,GPIO7,GPIO8,and GPIO9 changed for ESP32-WROOM-32E](https://esp32.com/viewtopic.php?t=29058)
 
-See also [this ESP-FAQ Handbook](https://docs.espressif.com/projects/esp-faq/en/latest/esp-faq-en-master.pdf).
+See also the `ESP-FAQ Handbook`.
-
-
-

IDE/Espressif/ESP-IDF/examples/template/CMakeLists.txt

@@ -1,12 +1,12 @@
 # wolfSSL Espressif Example Project CMakeLists.txt
-#   v1.2
+#   v1.3
 #
 # The following lines of boilerplate have to be in your project's
 # CMakeLists in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.16)
 
 # Optional no watchdog typically used for test & benchmark
-# add_compile_options(-DWOLFSSL_ESP_NO_WATCHDOG=1)
+add_compile_options(-DWOLFSSL_ESP_NO_WATCHDOG=1)
 
 # The wolfSSL CMake file should be able to find the source code.
 # Otherwise, assign an environment variable or set it here:
@@ -71,6 +71,10 @@ else()
     message(STATUS "No conflicting wolfSSL components found.")
 endif()
 
+# Ensure the this wolfSSL component directory is included
+set(WOLFSSL_PATH "${CMAKE_HOME_DIRECTORY}/components/wolfssl")
+list(APPEND EXTRA_COMPONENT_DIRS ${WOLFSSL_PATH})
+
 # Not only is a project-level "set(COMPONENTS" not needed here, this will cause
 # an unintuitive error about  Unknown CMake command "esptool_py_flash_project_args".
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)

IDE/Espressif/ESP-IDF/examples/template/README.md

@@ -7,7 +7,7 @@ For general information on [wolfSSL examples for Espressif](../README.md), see t
 
 ### Prerequisites
 
-It is assumed the [ESP-IDF environment](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/) has been installed.
+It is assumed the [ESP-IDF environment](Espressifget-started/) has been installed.
 
 ### Files Included
 
@@ -19,7 +19,7 @@ It is assumed the [ESP-IDF environment](https://docs.espressif.com/projects/esp-
 
 - The [components/wolfssl/CMakeLists.txt](./components/wolfssl/CMakeLists.txt) typically does not need to be changed.
 
-- Optional [VisualGDB Project](./VisualGDB/wolfssl_template_IDF_v5.1_ESP32.vgdbproj) for Visual Studio using ESP32 and ESP-IDF v5.1.
+- Optional [VisualGDB Project](./VisualGDB/README.md) for Visual Studio using ESP32 and ESP-IDF v5.2. See also [template](../template/VisualGDB/README.md) for other devices.
 
 - Edit the project [CMakeLists.txt](./CMakeLists.txt) to optionally point this project's wolfSSL component source code at a different directory:
 
@@ -30,12 +30,12 @@ set(WOLFSSL_ROOT "~/workspace/wolfssl-other-source")
 
 ## Getting Started:
 
-Here's an example using the command-line [idf.py](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-py.html).
+Here's an example using the command-line [idf.py](Espressifapi-guides/tools/idf-py.html).
 
 Edit your `WRK_IDF_PATH`to point to your ESP-IDF install directory.
 
 ```
-WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.1
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
 
 echo "Run export.sh from ${WRK_IDF_PATH}"
 . ${WRK_IDF_PATH}/export.sh
@@ -53,7 +53,7 @@ idf.py flash -p /dev/ttyS19 -b 115200
 idf.py flash -p /dev/ttyS19 -b 115200 monitor
 ```
 
-Press `Ctrl+]` to exit `idf.py monitor`. See [additional monitor keyboard commands](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-monitor.html).
+Press `Ctrl+]` to exit `idf.py monitor`. See [additional monitor keyboard commands](Espressifapi-guides/tools/idf-monitor.html).
 
 ## Other Examples:
 

IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/CMakeLists.txt

@@ -28,6 +28,9 @@ cmake_minimum_required(VERSION 3.16)
 
 set(VERBOSE_COMPONENT_MESSAGES 1)
 
+# Optional requires include:
+# set(THIS_ESP_TLS "esp-tls")
+set(THIS_ESP_TLS "")
 
 # function: IS_ESP_IDF_COMPONENT
 #  output:    RESULT = 1 (true) if this component is located in the ESP-IDF components
@@ -153,7 +156,7 @@ if( ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark") OR ("${CMAKE_PROJECT_
     message(STATUS "Not including lwip for ${CMAKE_PROJECT_NAME}")
 else()
     # benchmark and test do not need wifi, everything else probably does:
-    set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
+    set(COMPONENT_REQUIRES lwip "${THIS_ESP_TLS}") # we typically don't need lwip directly in wolfssl component
 endif()
 
 # find the user name to search for possible "wolfssl-username"
@@ -404,15 +407,20 @@ endif()
 
 if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
     # There's no esp_timer, no driver components for the ESP8266
-    message(STATUS "Early expansion EXCLUDES esp_timer: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion EXCLUDES esp_timer for esp8266: ${THIS_INCLUDE_TIMER}")
-    message(STATUS "Early expansion EXCLUDES driver: ${THIS_INCLUDE_DRIVER}")
+    message(STATUS "Early expansion EXCLUDES driver for esp8266: ${THIS_INCLUDE_DRIVER}")
     set(THIS_INCLUDE_TIMER "")
     set(THIS_INCLUDE_DRIVER "")
+    set(THIS_ESP_TLS "")
 else()
     message(STATUS "Early expansion includes esp_timer: ${THIS_INCLUDE_TIMER}")
     message(STATUS "Early expansion includes driver: ${THIS_INCLUDE_DRIVER}")
     set(THIS_INCLUDE_TIMER "esp_timer")
     set(THIS_INCLUDE_DRIVER "driver")
+    set(THIS_ESP_TLS "esp-tls")
+    # Let the app know that we've included the esp-tls component requirement.
+    # This is critical for use the the esp-tls component. See wolfssl esp_crt_bundle.c file.
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_REQUIRED_ESP_TLS=1")
 endif()
 
 if(CMAKE_BUILD_EARLY_EXPANSION)
@@ -420,6 +428,7 @@ if(CMAKE_BUILD_EARLY_EXPANSION)
     idf_component_register(
                             REQUIRES "${COMPONENT_REQUIRES}"
                             PRIV_REQUIRES # esp_hw_support
+                                          "${THIS_ESP_TLS}"
                                           "${THIS_INCLUDE_TIMER}"
                                           "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
                            )
@@ -757,6 +766,7 @@ else()
                                 REQUIRES "${COMPONENT_REQUIRES}"
                                 EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
                                 PRIV_REQUIRES
+                                  "${THIS_ESP_TLS}"
                                   "${THIS_INCLUDE_TIMER}"
                                   "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
                                )
@@ -768,7 +778,10 @@ else()
     endif()
 
 # function(WOLFSSL_INIT_CERT_BUNDLE)
-if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE AND NOT CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE)
+if( CONFIG_WOLFSSL_CERTIFICATE_BUNDLE
+    AND NOT CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+    AND NOT ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+  )
     if (CMAKE_BUILD_EARLY_EXPANSION)
         message(ERROR "Bundle Cert initialization must occur during CMAKE_BUILD_EARLY_EXPANSION")
     endif()
@@ -1001,10 +1014,13 @@ if(WOLFSSL_ROOT)
     set(ENV{PIO_WOLFSSL_ROOT} "${WOLFSSL_ROOT}")
     message(STATUS "PIO_WOLFSSL_ROOT =  $ENV{PIO_WOLFSSL_ROOT}")
     message(STATUS "PLATFORMIO_BUILD_DIR = $ENV{PLATFORMIO_BUILD_DIR}")
-    file(WRITE "tada.txt" "${WOLFSSL_ROOT}\n")
     # See esp-tls Kconfig; menu "ESP-TLS", ESP_TLS_LIBRARY_CHOOSE
     if(CONFIG_ESP_TLS_USING_WOLFSSL)
-        message(STATUS "wolfSSL will be used for ESP-TLS")
+        if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+            message(STATUS "This version of wolfSSL is not supported on the ESP8266 esp-tls at this time. Check ESP-TLS config")
+        else()
+            message(STATUS "wolfSSL will be used for ESP-TLS")
+        endif()
     else()
         message(STATUS "WARNING: wolfSSL NOT selected for ESP-TLS. Features and performance will be limited.")
     endif()

IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/Kconfig

@@ -41,7 +41,7 @@
 # The maximum length of options is NOT 50 characters as documented.
 #   kconfcheck will complain that options should be 40 at most.
 #
-# Fix option lengths first. Superflous errors on other lines may occur.
+# Fix option lengths first. Superfluous errors on other lines may occur.
 #
 # The maximum length of lines is 120 characters.
 #
@@ -382,6 +382,24 @@ menu "wolfSSL"
                 Hardware acceleration enabled by default.
                 Select this option to force disable: NO_HW_RSA_PRI_EXPTMOD
 
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
+            bool "Enable debugging of RSA Multiplication operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                multiplication operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+            bool "Enable debugging of RSA Modular operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                modular math operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
     endmenu # wolfSSL Hardware Acceleration
     # -----------------------------------------------------------------------------------------------------------------
 
@@ -410,6 +428,13 @@ menu "wolfSSL"
             default n
             help
                 Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+        config ESP_WOLFSSL_TEST_LOOP
+            bool "Run test apps in a loop until failure"
+            default y
+            help
+                Enable a loop wrapper for benchmark, http_client, and wolfssl test apps.
+
     endmenu # wolfSSL Debug Options
     # -----------------------------------------------------------------------------------------------------------------
 

IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/README.md

@@ -0,0 +1,162 @@
+# wolfSSL Espressif Component
+
+This is the directory for wolfSSL as an Espressif ESP-IDF component.
+
+Other options are available, such as installing wolfSSL as a local _project_ component using the [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/).
+
+Enabling this wolfSSL ESP-IDF component allows other ESP-IDF libraries such as those that depend on [ESP-TLS](https://github.com/espressif/esp-idf/tree/master/components/esp-tls)
+to also use the wolfSSL library. (See [github.com/wolfSSL/wolfssl](https://github.com/wolfSSL/wolfssl))
+
+The wolfSSL source code is not included here. Instead, the `idf.py menuconfig` option can be used to configure the
+`sdkconfig` file setting: `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` to point to the desired wolfSSL code.
+
+## Directory Contents
+
+This directory must contain, at a minimum:
+
+- `CMakeLists.txt`
+- `./include/user_settings.h`
+
+The directory should also contain:
+- `Kconfig`
+- `component.mk`
+
+The directory may contain wolfSSL source, for example with a [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/),
+or if the `setup.sh` script was used from [wolfSSL/IDE/Espressif/ESP-IDF](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF).
+
+
+Under normal circumstances when the wolfSSL source is not included here, the `CMakeLists.txt` will search for it in this order:
+
+- A hard-coded `WOLFSSL_ROOT` cmake variable.
+- `WOLFSSL_ROOT` Environment Variable
+- The `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` value in the `sdkconfig` file, from the `Kconfig` option.
+- Any parent directories, up to the root (if this directory is in the ESP-IDF components)
+- Any parent directories, up to the root (if this directory is a project component)
+
+While recursing up the directory tree, the following names of wolfSSL directories will be considered:
+
+- `wolfssl-[current user name]`
+- `wolfssl-master`
+- `wolfssl`
+
+## Getting Started
+
+See the `Espressif Getting Started Guide`.
+
+```
+# Set environment variable to ESP-IDF location
+# For example, VisualGDB in WSL
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-master/esp-idf/v5.3-master
+
+# Or wherever the ESP-IDF is installed:
+WRK_IDF_PATH=~/esp/esp-idf
+
+echo "Run export.sh from ${WRK_IDF_PATH}"
+. ${WRK_IDF_PATH}/export.sh
+
+cd [your project]
+
+idf.py menuconfig
+```
+
+Enable wolfSSL to be used in the ESP-TLS:
+
+```
+Component config  --->
+    ESP-TLS  --->
+        Choose SSL/TLS library for ESP-TLS (See help for more Info)
+            (X) wolfSSL (License info in wolfSSL directory README)
+```
+
+Adjust wolfSSL settings, such as path to source code as needed:
+
+```
+Component config  --->
+    wolfSSL  --->
+        [*] Include wolfSSL in ESP-TLS
+        [*] Use the specified wolfssl for ESP-TLS
+        (~/workspace/wolfssl) Enter a path for wolfSSL source code
+```
+
+## Configuration
+
+All settings for wolfSSL are adjusted in the [include/user_settings.h](./include/user_settings.h) file.
+
+The `user_settings.h` file should not be included directly. Instead, `#include <wolfssl/wolfcrypt/settings.h>`
+before any other wolfSSL headers, like this:
+
+
+```c
+/* ESP-IDF */
+#include <esp_log.h>
+#include "sdkconfig.h"
+
+/* wolfSSL */
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
+#if defined(WOLFSSL_USER_SETTINGS)
+    #include <wolfssl/wolfcrypt/settings.h>
+    #if defined(WOLFSSL_ESPIDF)
+        #include <wolfssl/version.h>
+        #include <wolfssl/wolfcrypt/types.h>
+        #include <wolfcrypt/test/test.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+    #else
+        #error "Problem with wolfSSL user_settings. "           \
+               "Check components/wolfssl/include "              \
+               "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+               "typically in the component CMakeLists.txt"
+    #endif
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
+#endif
+```
+
+## Examples
+
+See the wolfSSL examples:
+
+- [wolfSSL Core Examples](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples)
+- [wolfSSL Additional Examples](https://github.com/wolfSSL/wolfssl-examples/tree/master/ESP32)
+- [wolfSSH Core Examples](https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples)
+- [wolfSSH Additional Examples](https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif)
+- [wolfMQTT Examples](https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples)
+
+## Platforms
+
+The ESP-IDF wolfSSL is also available for PlatformIO:
+
+- [Release wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl)
+- [Staging / Preview wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl-staging)
+
+The wolfSSL library can also be used for Espressif with Arduino:
+
+- [arduino.cc/reference/en/libraries/wolfssl](https://www.arduino.cc/reference/en/libraries/wolfssl/)
+- [github.com/wolfSSL/Arduino-wolfSSL](https://github.com/wolfSSL/Arduino-wolfSSL)
+
+
+## Additional Information
+
+- [wolfSSL Documentation](https://www.wolfssl.com/documentation/manuals/wolfssl/index.html) and [docs/espressif](https://www.wolfssl.com/docs/espressif/)
+- [wolfSSL FAQ](https://www.wolfssl.com/docs/frequently-asked-questions-faq/)
+- [wolfSSL Products](https://www.wolfssl.com/products/)
+- [www.wolfssl.com/espressif](https://www.wolfssl.com/espressif/)
+- [More...](https://www.wolfssl.com/?s=espressif)
+
+## Contact
+
+Have a specific request or questions? We'd love to hear from you! Please contact us at support@wolfssl.com or open an issue on GitHub.
+
+## Licensing and Support
+
+wolfSSL (formerly known as CyaSSL) and wolfCrypt are either licensed for use under the GPLv2 (or at your option any later version) or a standard commercial license. For our users who cannot use wolfSSL under GPLv2 (or any later version), a commercial license to wolfSSL and wolfCrypt is available.
+
+See the LICENSE.txt, visit wolfssl.com/license, contact us at licensing@wolfssl.com or call +1 425 245 8247
+
+View Commercial Support Options: [wolfssl.com/products/support-and-maintenance](wolfssl.com/products/support-and-maintenance)
+

IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/component.mk

@@ -0,0 +1,296 @@
+#
+# Copyright (C) 2006-2024 wolfSSL Inc.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+
+$(info ***********  wolfssl component ************)
+
+#
+# Component Makefile
+#
+#
+# The Espressif Managed Components are only for newer versions of the ESP-IDF
+# Typically only for ESP32[-x] targets and only for ESP-IDF v4.3 or later:
+# See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-component-manager.html
+#     https://components.espressif.com/
+#
+# Usage:
+#
+#   make flash
+#
+#   make flash ESPPORT=/dev/ttyS55
+#
+#   make flash ESPBAUD=9600
+#
+#   make monitor ESPPORT=COM1
+#
+#   make monitor ESPPORT=/dev/ttyS55 MONITORBAUD=115200
+#
+#   export ESPPORT=/dev/ttyS55
+#
+# https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/get-started/index.html
+#
+
+# Although the project should define WOLFSSL_USER_SETTINGS, we'll also
+# define it here:
+CFLAGS +=-DWOLFSSL_USER_SETTINGS
+
+# Note that 4 source files created by autogen are excluded here.
+#
+# See these files commented out, below. Adjust as needed for your application:
+#
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o
+
+
+# NOTICE: the WOLFSSL_ROOT setting MUST be relative!
+# See https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/api-guides/build-system.html?highlight=must+relative#optional-component-specific-variables
+# In the wolfSSL GitHub examples for Espressif:
+#   https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples
+# When this wolfssl component.mk makefile is in [project]/components/wolfssl
+# The root is 7 directories up from here (the location of of this component.mk):
+WOLFSSL_ROOT := ../../../../../../..
+
+# To set the location of a different location, it is best to use relative paths.
+#
+# Set WOLFSSL_ROOT to a relative path from the current component directory.
+# For example, if the wolfssl_client is copied from the examples to test:
+#
+# cp -r /IDE/Espressif/ESP-IDF/examples/wolfssl_client/* /mnt/c/test/demo
+#
+# we run make in   /mnt/c/test/demo
+# component is in  /mnt/c/test/demo/components/wolfssl
+# wolfssl is in    /mnt/c/workspace/wolfssl-master
+#
+# "/mnt/c" is 4 directories up:
+#             2 for `./test/demo` from where we run `make`, plus
+#             2 more from the location of `component.mk` located
+#               in `[current directory]/components/wolfssl`.
+#
+# Thus we need 4 parent reference to find the relative path to wolfSSL:
+# WOLFSSL_ROOT := ../../../../workspace/wolfssl-master
+
+# Optional CFLAGS (make works without these; for reference only)
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
+
+abs_WOLFSSL_ROOT := $(shell realpath $(WOLFSSL_ROOT))
+
+# print-wolfssl-path-value:
+#	@echo "WOLFSSL_ROOT defined: $(WOLFSSL_ROOT)"
+#	@echo "WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT)"
+
+$(info WOLFSSL_ROOT defined: $(WOLFSSL_ROOT))
+$(info WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT))
+
+# NOTE: The wolfSSL include directory (e.g. user_settings.h) is
+# located HERE in THIS project, and *not* in the wolfSSL root.
+COMPONENT_ADD_INCLUDEDIRS := .
+COMPONENT_ADD_INCLUDEDIRS += include
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/.
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
+# COMPONENT_ADD_INCLUDEDIRS += $ENV(IDF_PATH)/components/freertos/include/freertos
+# COMPONENT_ADD_INCLUDEDIRS += "$ENV(IDF_PATH)/soc/esp32s3/include/soc"
+
+# wolfSSL
+COMPONENT_SRCDIRS := $(WOLFSSL_ROOT)/src
+
+# wolfcrypt
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src
+
+# Espressif
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/atmel
+
+COMPONENT_OBJEXCLUDE := $(WOLFSSL_ROOT)/wolfcrypt/src/aes_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/misc.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/sha512_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_x25519_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/aes_gcm_x86_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/src/bio.o
+
+
+##
+## wolfSSL
+##
+COMPONENT_OBJS := $(WOLFSSL_ROOT)/src/bio.o
+# COMPONENT_OBJS += src/conf.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/crl.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls13.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/internal.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/keys.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ocsp.o
+# COMPONENT_OBJS += src/pk.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/quic.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/sniffer.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ssl.o
+# COMPONENT_OBJS += src/ssl_asn1.o
+# COMPONENT_OBJS += src/ssl_bn.o
+# COMPONENT_OBJS += src/ssl_certman.o
+# COMPONENT_OBJS += src/ssl_crypto.o
+# COMPONENT_OBJS += src/ssl_misc.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls13.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/wolfio.o
+# COMPONENT_OBJS += src/x509.o
+# COMPONENT_OBJS += src/x509_str.o
+
+##
+## wolfcrypt
+##
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/aes.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/arc4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asn.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o # autogen exclusion
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2b.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2s.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/camellia.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha20_poly1305.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cmac.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/coding.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/compress.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cpuid.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cryptocb.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve25519.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/des3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dh.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dilithium.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dsa.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/eccsi.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc_fp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed25519.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/error.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_kyber.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_lms.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_xmss.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/falcon.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_low_mem.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_operations.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips_test.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_low_mem.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_operations.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hash.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hmac.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hpke.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/integer.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/kdf.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/logging.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md5.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/memory.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/misc.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs12.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs7.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/poly1305.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pwdbased.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/random.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rc2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ripemd.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rsa.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sakke.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o # autogen exclusion
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha256.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha512.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/signature.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/siphash.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sphincs.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_armthumb.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c32.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c64.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_cortexm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_dsp32.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_int.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_armthumb.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_cortexm.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_x86_64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_x86_64.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/srp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/tfm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_dsp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_encrypt.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_kyber.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_kyber_poly.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_lms.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_pkcs11.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_port.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_xmss.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o # autogen exclusion
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o  # autogen exclusion
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfevent.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfmath.o
+
+##
+## Espressif
+##
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_aes.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_mp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_sha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_util.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_mem_lib.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_time_lib.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.o
+
+##
+## wolfcrypt benchmark  (optional)
+##
+## COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark/benchmark.o
+## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
+## COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
+
+
+##
+## wolfcrypt test (optional)
+##
+## COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/test/test.o
+## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/test
+
+##
+## wolfcrypt
+##
+## COMPONENT_PRIV_INCLUDEDIRS += $(PROJECT_PATH)/components/wolfssl/include
+## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src
+
+$(info ********** end wolfssl component **********)

IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/include/user_settings.h

@@ -85,6 +85,9 @@
 /* Turn on messages that are useful to see only in examples. */
 #define WOLFSSL_EXAMPLE_VERBOSITY
 
+/* Paths can be long, ensure the entire value printed during debug */
+#define WOLFSSL_MAX_ERROR_SZ 500
+
 /* wolfSSL Examples: set macros used in example applications.
  *
  * These Settings NOT available in ESP-IDF (e.g. esp-tls)
@@ -153,8 +156,13 @@
 
 /* Other applications detected by cmake */
 #elif defined(APP_ESP_HTTP_CLIENT_EXAMPLE)
-    /* The wolfSSL Version */
+    /* The wolfSSL Version of the client example */
-    #define FP_MAX_BITS (8192 * 2)
+    #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C2)
+        /* Less memory available, so smaller key sizes: */
+        #define FP_MAX_BITS (4096 * 2)
+    #else
+        #define FP_MAX_BITS (8192 * 2)
+    #endif
     #define HAVE_ALPN
     #define HAVE_SNI
     #define OPENSSL_EXTRA_X509_SMALL
@@ -240,9 +248,23 @@
 /* Used by ESP-IDF components: */
 #if defined(CONFIG_ESP_TLS_USING_WOLFSSL)
     /* The ESP-TLS */
-    #define FP_MAX_BITS (8192 * 2)
+    #ifndef FP_MAX_BITS
+        #if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+            defined(CONFIG_IDF_TARGET_ESP8684) || \
+            defined(CONFIG_IDF_TARGET_ESP8266)
+            /* Optionally set smaller size here */
+            #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+        #else
+            #define FP_MAX_BITS (4096 * 2)
+        #endif
+    #endif
     #define HAVE_ALPN
-    #define HAVE_SNI
+    #ifndef CONFIG_IDF_TARGET_ESP8266
+        /* Unless installed in the ESP8266 RTOS SDK locally, the wolfSSL
+         * API for SNI will not be seen in the components/esp-tls layer.
+         * Only enable SNI for non-ESP8266 targets by default: */
+        #define HAVE_SNI
+    #endif
     #define OPENSSL_EXTRA_X509_SMALL
 
     #define HAVE_TLS_EXTENSIONS
@@ -349,18 +371,25 @@
     /* Required for RSA */
     #define WC_RSA_PSS
 
-    /* TLS 1.3 normally requires HAVE_FFDHE. For now just syntax highlight: */
+    /* TLS 1.3 normally requires HAVE_FFDHE */
     #if defined(HAVE_FFDHE_2048) || \
         defined(HAVE_FFDHE_3072) || \
         defined(HAVE_FFDHE_4096) || \
         defined(HAVE_FFDHE_6144) || \
         defined(HAVE_FFDHE_8192)
     #else
+        #define HAVE_FFDHE_2048
         /* #error "TLS 1.3 requires HAVE_FFDHE_[nnnn]" */
     #endif
 #endif
 
-
+#if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+    defined(CONFIG_IDF_TARGET_ESP8684)
+    /* Optionally set smaller size here */
+    #define HAVE_FFDHE_4096
+#else
+    #define HAVE_FFDHE_4096
+#endif
 
 #define NO_FILESYSTEM
 
@@ -477,8 +506,11 @@
 /* #define XTIME time */
 
 
-/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
+/* Adjust wait-timeout count if you see timeout in RSA HW acceleration.
-#define ESP_RSA_TIMEOUT_CNT    0x349F00
+ * Set to very large number and enable WOLFSSL_HW_METRICS to determine max. */
+#ifndef ESP_RSA_TIMEOUT_CNT
+	#define ESP_RSA_TIMEOUT_CNT 0xFF0000
+#endif
 
 /* hash limit for test.c */
 #define HASH_SIZE_LIMIT
@@ -733,12 +765,16 @@
     #define WOLFSSL_ESP8266
 
     /* There's no hardware encryption on the ESP8266 */
-    /* Consider using the ESP32-C2/C3/C6
+    /* Consider using the ESP32-C2/C3/C6             */
-     * See https://www.espressif.com/en/products/socs/esp32-c2 */
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
     #define NO_WOLFSSL_ESP32_CRYPT_AES
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+    #ifndef FP_MAX_BITS
+        /* FP_MAX_BITS matters in wolfssl_test, not just TLS setting.   */
+        /* MIN_FFDHE_FP_MAX_BITS = (MIN_FFDHE_BITS * 2); see settings.h */
+        #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+    #endif
     /***** END CONFIG_IDF_TARGET_ESP266 *****/
 
 #elif defined(CONFIG_IDF_TARGET_ESP8684)
@@ -750,7 +786,7 @@
     /***** END CONFIG_IDF_TARGET_ESP8684 *****/
 
 #else
-    /* Anything else encountered, disable HW accleration */
+    /* Anything else encountered, disable HW acceleration */
     #warning "Unexpected CONFIG_IDF_TARGET_NN value"
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
@@ -791,7 +827,7 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
 optionally increase error message size for very long paths.
 #define WOLFSSL_MAX_ERROR_SZ 500
 
-Turn debugging on/off:
+Turn wolfSSL debugging on/off:
     wolfSSL_Debugging_ON();
     wolfSSL_Debugging_OFF();
 
@@ -801,6 +837,7 @@ Turn debugging on/off:
 #define DEBUG_WOLFSSL_SHA_MUTEX
 #define WOLFSSL_DEBUG_IGNORE_ASN_TIME
 #define WOLFSSL_DEBUG_CERT_BUNDLE
+#define WOLFSSL_DEBUG_CERT_BUNDLE_NAME
 #define WOLFSSL_ESP32_CRYPT_DEBUG
 #define WOLFSSL_ESP32_CRYPT_HASH_SHA224_DEBUG
 #define NO_RECOVER_SOFTWARE_CALC
@@ -809,6 +846,8 @@ Turn debugging on/off:
 #define WOLFSSL_ESP32_HW_LOCK_DEBUG
 #define WOLFSSL_DEBUG_MUTEX
 #define WOLFSSL_DEBUG_ESP_RSA_MULM_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
 #define ESP_DISABLE_HW_TASK_LOCK
 #define ESP_MONITOR_HW_TASK_LOCK
 #define USE_ESP_DPORT_ACCESS_READ_BUFFER

IDE/Espressif/ESP-IDF/examples/template/main/CMakeLists.txt

@@ -1,5 +1,5 @@
 # wolfSSL Espressif Example Project/main CMakeLists.txt
-#   v1.0
+#   v1.1
 #
 # wolfssl template
 #

IDE/Espressif/ESP-IDF/examples/template/main/Kconfig.projbuild

@@ -57,7 +57,7 @@ choice WOLFSSL_EXAMPLE_CHOOSE
     config WOLFSSL_EXAMPLE_NAME_WOLFSSH_TEMPLATE
         bool "SSH Template App"
         help
-            Bare-bones Hellow World app that only compiles in wolfSSL and wolfSSH.
+            Bare-bones Hello World app that only compiles in wolfSSL and wolfSSH.
             See wolfSSL/wolfssh on GitHub.
 
     config WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER

IDE/Espressif/ESP-IDF/examples/template/main/include/main.h

@@ -18,7 +18,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+
 #ifndef _MAIN_H_
 #define _MAIN_H_
 
+void app_main(void);
+
 #endif

IDE/Espressif/ESP-IDF/examples/template/sdkconfig.defaults

@@ -1,30 +1,142 @@
 # Set the known example app config to template example (see user_settings.h)
 CONFIG_WOLFSSL_EXAMPLE_NAME_TEMPLATE=y
 
+# Some wolfSSL helpers
+CONFIG_USE_WOLFSSL_ESP_SDK_TIME=y
+
+
+# FreeRTOS ticks at 1ms interval
+CONFIG_FREERTOS_UNICORE=y
 CONFIG_FREERTOS_HZ=1000
 CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
 
-# Set the known example app config to TLS Client (see user_settings.h)
-CONFIG_WOLFSSL_EXAMPLE_NAME_TEMPLATE=y
 #
-# Default main stack size
+# Default main stack size. See user_settings.h
 #
-# This is typically way bigger than needed for stack size. See user_settings.h
+# This is typically bigger than needed for stack size.
+# Units are words, not bytes. See user_settings.h
 #
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=10500
+# For wolfSSL SMALL_STACK, 3072 bytes should be sufficient for benchmark app.
-
+# When using RSA, assign at least 10500 bytes, otherwise 5500 usually works for others
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 # Legacy stack size for older ESP-IDF versions
-CONFIG_MAIN_TASK_STACK_SIZE=10500
+CONFIG_MAIN_TASK_STACK_SIZE=3584
+
+#
+# Benchmark must not have CONFIG_NEWLIB_NANO_FORMAT enabled
+CONFIG_NEWLIB_NANO_FORMAT=n
+#
+# Watchdog Timers
+#
+# We don't want to have the watchdog timeout during tests & benchmarks
+#
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
+# Panic & Watchdog
+CONFIG_ESP_INT_WDT_TIMEOUT_MS=10000
+CONFIG_ESP_TASK_WDT_EN=n
+CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
+CONFIG_ESP_INT_WDT=n
+
+# ESP8266 Watchdog:
+CONFIG_TASK_WDT=n
+CONFIG_TASK_WDT_PANIC=n
+
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y
+
+# CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS is not set
+CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# Performance
+# CONFIG_COMPILER_OPTIMIZATION_PERF=y
+
+# Set max CPU frequency (falls back as needed for lower maximum)
+CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
+
+# Enable wolfSSL TLS in esp-tls
+CONFIG_ESP_TLS_USING_WOLFSSL=y
+CONFIG_TLS_STACK_WOLFSSL=y
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=y
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=n
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+# Some wolfSSL helpers
+CONFIG_USE_WOLFSSL_ESP_SDK_TIME=n
+
+# CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS is not set
+CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# Performance
+# CONFIG_COMPILER_OPTIMIZATION_PERF=y
+
+# Ensure mbedTLS options are disabled
+# CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=n
+# CONFIG_MBEDTLS_TLS_CLIENT_ONLY=n
+# CONFIG_MBEDTLS_TLS_SERVER=n
+# CONFIG_MBEDTLS_TLS_CLIENT=n
+# CONFIG_MBEDTLS_HARDWARE_AES=n
+# CONFIG_MBEDTLS_HARDWARE_MPI=n
+# CONFIG_MBEDTLS_HARDWARE_SHA=n
+# CONFIG_MBEDTLS_ROM_MD5=n
+# CONFIG_MBEDTLS_SSL_RENEGOTIATION=n
+# CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=n
+# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1=n
+# CONFIG_MBEDTLS_SSL_ALPN=n
+# CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=n
+# CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=n
+
+# The same-name config is used for both WiFi and client/server TLS, so we cannot disable:
+# CONFIG_MBEDTLS_TLS_ENABLED=n
+# CONFIG_MBEDTLS_TLS_DISABLED=y
 
 #
 # Compiler options
 #
 CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
+# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
+# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
+# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
+# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
+CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
+# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
 CONFIG_COMPILER_HIDE_PATHS_MACROS=y
+# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
+# CONFIG_COMPILER_CXX_RTTI is not set
+# CONFIG_COMPILER_STACK_CHECK_MODE_NONE is not set
 CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
+# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
+# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
 CONFIG_COMPILER_STACK_CHECK=y
+# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set
+# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
+# CONFIG_COMPILER_DUMP_RTL_FILES is not set
+# end of Compiler options
+
+# We don't know that the min is actually v2,
+# but this is the earliest tested.
+CONFIG_ESP32C3_REV_MIN_2=y
 
 #
 # Partition Table

IDE/Espressif/ESP-IDF/examples/template/sdkconfig.defaults.esp8266

@@ -0,0 +1,30 @@
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y
+
+# Enable wolfSSL TLS in esp-tls (not yet supported in RTOS SDK 3.4
+CONFIG_ESP_TLS_USING_WOLFSSL=n
+CONFIG_TLS_STACK_WOLFSSL=n
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# ESP8266 Watchdog:
+CONFIG_TASK_WDT=n
+CONFIG_TASK_WDT_PANIC=n
+
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/CMakeLists.txt

@@ -1,11 +1,13 @@
 # wolfSSL Espressif Example Project CMakeLists.txt
-#   v1.0
+#   v1.3
 #
 # The following lines of boilerplate have to be in your project's
 # CMakeLists in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.16)
 
+# Optional no watchdog typically used for test & benchmark
 add_compile_options(-DWOLFSSL_ESP_NO_WATCHDOG=1)
+
 # The wolfSSL CMake file should be able to find the source code.
 # Otherwise, assign an environment variable or set it here:
 #
@@ -20,19 +22,58 @@ add_compile_options(-DWOLFSSL_ESP_NO_WATCHDOG=1)
 #   Linux:  ~/workspace
 # Windows:  C:\workspace
 #
+if(WIN32)
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WINDOWS")
+    message("Detected Windows")
+endif()
+if(CMAKE_HOST_UNIX)
+    message("Detected UNIX")
+endif()
+if(APPLE)
+    message("Detected APPLE")
+endif()
+if(CMAKE_HOST_UNIX AND (NOT APPLE) AND EXISTS "/proc/sys/fs/binfmt_misc/WSLInterop")
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WSL")
+    message("Detected WSL")
+endif()
+if(CMAKE_HOST_UNIX AND (NOT APPLE) AND (NOT WIN32))
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_LINUX")
+    message("Detected Linux")
+endif()
+if(APPLE)
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_APPLE")
+    message("Detected Apple")
+endif()
+# End optional WOLFSSL_CMAKE_SYSTEM_NAME
 
-# Optionally specify a location for wolfSSL component source code
+# Check that there are not conflicting wolfSSL components
-# set(WOLFSSL_ROOT "c:/mydir/wolfssl" )
+# The ESP Registry Component will be in ./managed_components/wolfssl__wolfssl
-# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+# The local component wolfSSL directory will be in ./components/wolfssl
-# set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" AND EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl" )
-#
+    # These exclude statements don't seem to be honored by the $ENV{IDF_PATH}/tools/cmake/project.cmake'
-#if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" EXCLUDE_FROM_ALL)
-#    message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl/include" EXCLUDE_FROM_ALL)
-#    set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+    # So we'll error out and let the user decide how to proceed:
-#    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DFOUND_PROTOCOL_EXAMPLES_DIR")
+    message(WARNING "\nFound wolfSSL components in\n"
-#else()
+                    "./managed_components/wolfssl__wolfssl\n"
-#    message("NOT FOUND: PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+                    "and\n"
-#endif()
+                    "./components/wolfssl\n"
+                    "in project directory: \n"
+                    "${CMAKE_HOME_DIRECTORY}")
+    message(FATAL_ERROR "\nPlease use either the ESP Registry Managed Component or the wolfSSL component directory but not both.\n"
+                        "If removing the ./managed_components/wolfssl__wolfssl directory, remember to also remove "
+                        "or rename the idf_component.yml file typically found in ./main/")
+else()
+    message(STATUS "No conflicting wolfSSL components found.")
+endif()
+
+# Ensure the this wolfSSL component directory is included
+set(WOLFSSL_PATH "${CMAKE_HOME_DIRECTORY}/components/wolfssl")
+list(APPEND EXTRA_COMPONENT_DIRS ${WOLFSSL_PATH})
 
 # Not only is a project-level "set(COMPONENTS" not needed here, this will cause
 # an unintuitive error about  Unknown CMake command "esptool_py_flash_project_args".

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/README.md

@@ -7,8 +7,9 @@ For general information on [wolfSSL examples for Espressif](../README.md), see t
 
 ## Espressif ESP Component Registry
 
-See the wolfSSL namespace at [components.espressif.com](https://components.espressif.com/components?q=wolfssl)
+See the wolfSSL namespace and additional details:
 
+https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/
 
 ## Windows COM Port
 
@@ -38,9 +39,7 @@ using the VisualGDB extension.
 
 The naming convention for project files is: `[project name]_IDF_[Version]_[chipset].vgdbproj`. The solution files (filename[.sln]) often will contain shortcuts to commonly used source and configuration files used by the respective project.
 
-
+ChipSet  | ESP-IDF v4.4 | ESP-IDF v5.2 |
--------- |------------- |------------- |
-ChipSet  | ESP-IDF v4.4 | ESP-IDF v5.1 |
 -------- |------------- |------------- |
 ESP32    |      x       |              |
 ESP32-S2 |              |              |
@@ -66,7 +65,8 @@ See the [feature request](https://sysprogs.com/w/forums/topic/feature-request-sh
     1-1. Example Configuration ->
 
     BENCH_ARG : argument that you want to use. Default is "-lng 0"
-    The list of argument can be find in help.
+    The list of arguments can be found in help. See [benchmark/README.md](https://github.com/wolfSSL/wolfssl/blob/master/wolfcrypt/benchmark/README.md)
+    Features to be benchmarked are enabled in the `user_settings.h`.
 
 When you want to run the benchmark program
 
@@ -89,14 +89,34 @@ git fetch
 git pull
 git submodule update --init --recursive
 
-cd /mnt/c/workspace/wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
+# pick your workspace location
+# cd ~/workspace/wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
+# cd /mnt/c/workspace/wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
+# cd /mnt/c/workspace/wolfssl-master/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
+cd /mnt/c/workspace/wolfssl-$USER/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
 
-# Pick ESP-IDF install directory, this one for v5.1 in VisualGDB
+# The ESP8266 uses a completely different toolchain:
+WRK_IDF_PATH=/mnt/c/SysGCC/esp8266/rtos-sdk/v3.4
 
-WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.1
+# Pick ESP-IDF toolchain install directory
-WRK_IDF_PATH=/mnt/c/SysGCC/esp32-8.4/esp-idf/v4.4.1
 WRK_IDF_PATH=~/esp/esp-idf
 
+# ESP-IDF v4.x uses toolchain v8.4
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-8.4/esp-idf/v4.4.1
+
+# ESP-IDF v5.0 with toolchain v12.4
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-12.4/esp-idf/v5.0
+
+# ESP-IDF v5.0 to v5.2.1 uses toolchain v12.4
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-12.4/esp-idf/v5.0
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-12.4/esp-idf/v5.1
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-12.4/esp-idf/v5.2.1
+
+# The most recent version:
+# ESP-IDF v5.2 uses toolchain v13.2
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+
+
 . $WRK_IDF_PATH/export.sh
 
 # Set target SoC

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/CMakeLists.txt

@@ -19,17 +19,67 @@
 #
 # cmake for wolfssl Espressif projects
 #
-# Version 5.7.0 template update + THIS_IDF_PATH
+# Version 5.7.2 Espressif ESP-IDF integration
 #
 # See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html
 #
-
+message(STATUS "Begin wolfssl ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
 cmake_minimum_required(VERSION 3.16)
 
 set(VERBOSE_COMPONENT_MESSAGES 1)
 
+# Optional requires include:
+# set(THIS_ESP_TLS "esp-tls")
+set(THIS_ESP_TLS "")
+
+# function: IS_ESP_IDF_COMPONENT
+#  output:    RESULT = 1 (true) if this component is located in the ESP-IDF components
+#             otherwise 0 (false)
+function( IS_ESP_IDF_COMPONENT  RESULT )
+    # NOTE: Component location is based on the location of the CMakeList.txt
+    # and *not* the location of the wolfSSL source code. (which may be anywhere)
+
+    # Normalize the paths to remove any trailing slashes
+    get_filename_component(NORMALIZED_IDF_PATH  "${IDF_PATH}"      REALPATH)
+    get_filename_component(NORMALIZED_TEST_PATH "${COMPONENT_DIR}" REALPATH)
+
+    # Check if the test path starts with the IDF_PATH
+    string(FIND "${NORMALIZED_TEST_PATH}" "${NORMALIZED_IDF_PATH}" pos)
+
+    if(${pos} EQUAL 0)
+        message(STATUS "${COMPONENT_DIR} is within IDF_PATH.")
+        set(${RESULT} 1 PARENT_SCOPE)
+    else()
+        message(STATUS "${COMPONENT_DIR} is not within IDF_PATH.")
+        set(${RESULT} 0 PARENT_SCOPE)
+    endif()
+endfunction()
+
+# Determine if this cmake file is located in the ESP-IDF component directory or not,
+# and if so, if it is being ignored (allowing the use of a local project one, instead).
+IS_ESP_IDF_COMPONENT( IS_WOLSSL_ESP_IDF_COMPONENT )
+if( IS_WOLSSL_ESP_IDF_COMPONENT )
+    message(STATUS "This wolfSSL is a component in ESP-IDF.")
+    if ( CONFIG_IGNORE_ESP_IDF_WOLFSSL_COMPONENT )
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component in ESP-IDF is being ignored.")
+        return()
+    endif()
+endif()
+
+
+if( "${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}" STREQUAL "" )
+    # nothing to do
+else()
+    # Only forward slashes, or double backslashes are supported.
+    # By the time we get here the sdkconfig file has a value for wolfSSL source code root.
+    string(REPLACE "\\" "/" CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
+    message(STATUS "Cleaned wolfssl path: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+endif()
+
 # The scope of this CMAKE_C_FLAGS is just this component:
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DWOLFSSL_USER_SETTINGS")
 
 set(CMAKE_CURRENT_SOURCE_DIR ".")
 # set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
@@ -42,7 +92,7 @@ if ( "${WOLFSSL_ROOT}" STREQUAL "")
 endif()
 
 if(  "$ENV{IDF_PATH}" STREQUAL "" )
-     message(FATAL_ERROR "IDF_PATH Environment variable not set!")
+    message(FATAL_ERROR "IDF_PATH Environment variable not set!")
 else()
     string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
 endif()
@@ -106,7 +156,7 @@ if( ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark") OR ("${CMAKE_PROJECT_
     message(STATUS "Not including lwip for ${CMAKE_PROJECT_NAME}")
 else()
     # benchmark and test do not need wifi, everything else probably does:
-    set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
+    set(COMPONENT_REQUIRES lwip "${THIS_ESP_TLS}") # we typically don't need lwip directly in wolfssl component
 endif()
 
 # find the user name to search for possible "wolfssl-username"
@@ -130,6 +180,25 @@ else()
     string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
 endif()
 
+# ENVIRONMENT_VAR_TO_MACRO
+# Check environment variable name EVARPARAM as [name]
+# If defined, and has a value of EVARVALUE as [value],
+# then assign a compiler definition "-D[name]=[value]"
+function(ENVIRONMENT_VAR_TO_MACRO EVARPARAM EVARVALUE)
+    # If the EVARPARAM environment variable name is set to EVARVALUE,
+    # set the compiler flag definition to enable CSV output.
+    if ( "$ENV{${EVARPARAM}}" STREQUAL "${EVARVALUE}")
+        message(STATUS "Appending compile definition: -D${EVARPARAM}=${EVARVALUE}")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D${EVARPARAM}=${EVARVALUE}")
+    else()
+        if(DEFINED ENV{${EVARPARAM}})
+            message(STATUS "Environment variable ${EVARPARAM} detected but set to $ENV{${EVARPARAM}}, not appending compile definition.")
+        else()
+            message(STATUS "Environment variable ${EVARPARAM} not detected, not appending compile definition.")
+        endif()
+    endif()
+endfunction()
+
 # COMPONENT_NAME = wolfssl
 # The component name is the directory name. "No feature to change this".
 # See https://github.com/espressif/esp-idf/issues/8978#issuecomment-1129892685
@@ -147,7 +216,8 @@ endif()
 # function: IS_WOLFSSL_SOURCE
 #  parameter: DIRECTORY_PARAMETER - the directory to test
 #  output:    RESULT = contains contents of DIRECTORY_PARAMETER for wolfssl directory, otherwise blank.
-function(IS_WOLFSSL_SOURCE DIRECTORY_PARAMETER RESULT)
+function( IS_WOLFSSL_SOURCE  DIRECTORY_PARAMETER
+          RESULT )
     if (EXISTS "${DIRECTORY_PARAMETER}/wolfcrypt/src")
         set(${RESULT} "${DIRECTORY_PARAMETER}" PARENT_SCOPE)
     else()
@@ -166,26 +236,56 @@ function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
     message(STATUS "Starting FIND_WOLFSSL_DIRECTORY: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
 
     if ( "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}" STREQUAL "" )
+        # The parameter is empty, so we certainly need to search.
+        # First, see if there's an environment variable. This takes highest priority (unless already found as hard-coded, above)
         set(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}")
         if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
             message(STATUS "The WOLFSSL_ROOT environment variable is not set. Searching...")
-        else()
+            # Next, if not found, see if wolfSSL was selected for ESP-TLS Kconfig
-            get_filename_component(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}" ABSOLUTE)
+            if(CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT)
-            IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR}" FOUND_WOLFSSL)
+                set(CURRENT_SEARCH_DIR ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
-            if( FOUND_WOLFSSL )
+                get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
-                message(STATUS "Found WOLFSSL_ROOT via Environment Variable:")
+                message(STATUS "WOLFSSL_ROOT found in sdkconfig/KConfig: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
             else()
-                message(FATAL_ERROR "WOLFSSL_ROOT Environment Variable defined, but path not found:")
+                message(STATUS "wolfSSL not defined in [Component Config] [wolfssl]. Continuing search...")
-                message(STATUS "$ENV{WOLFSSL_ROOT}")
+                # If not specified as a search hint in OUTPUT_FOUND_WOLFSSL_DIRECTORY:
-            endif()
+                # This wolfSSL component CMakeLists.txt may be found EITHER in:
-        endif()
+                #   1) local project component
+                #   2) ESP-IDF share components
+                # We'll start in the CMAKE_CURRENT_SOURCE_DIR, typically [something]/projectname/components/wolfssl
+                # That option might find wolfSSL source code as a copy in the component directory (e.g. Managed Components)
+                # Unless cmake is in the ESP-IDF, in which case it is unlikely to find wolfSSL source in any parent.
+                message(STATUS "CMAKE_CURRENT_SOURCE_DIR = ${CMAKE_CURRENT_SOURCE_DIR}")
+                get_filename_component(CURRENT_SEARCH_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ABSOLUTE)
+                message(STATUS "CURRENT_SEARCH_DIR = ${CURRENT_SEARCH_DIR}")
+                string(LENGTH ${CURRENT_SEARCH_DIR} CURRENT_SEARCH_DIR_LENGTH)
+            endif() # CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT
+        endif() # check environment var blank
     else()
-        get_filename_component(CURRENT_SEARCH_DIR "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}" ABSOLUTE)
+        message(STATUS "Parameter found for FIND_WOLFSSL_DIRECTORY")
+        message(STATUS "Setting wolfSSL search directory to: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+        set(CURRENT_SEARCH_DIR "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+    endif() # parameter empty
+
+    # Check to see if we found a path in environment or config settings, above.
+    if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+        message(STATUS "Source for wolfSSL not specified in path nor config settings.")
+        # We'll continue the search by recursing up the directory tree, below.
+    else()
+        # Setting found! Does it contain a valid path?
+        string(REPLACE "\\" "/" CURRENT_SEARCH_DIR ${CURRENT_SEARCH_DIR})
+        get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
         IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR}" FOUND_WOLFSSL)
         if( FOUND_WOLFSSL )
-            message(STATUS "Found WOLFSSL_ROOT via prior specification.")
+            message(STATUS "Found wolfSSL source code via setting: ${CURRENT_SEARCH_DIR}")
+            set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
+            return()
         else()
-            message(FATAL_ERROR "WOLFSSL_ROOT Variable defined, but path not found: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+            if(WIN32)
+                message(STATUS "When specifying a path for Windows, use forward slahes, or double backslashes.")
+            endif()
+            message(STATUS "CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT sdkconfig setting = ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+            message(STATUS "WOLFSSL_ROOT Variable defined, but source code not found: ${CURRENT_SEARCH_DIR}")
         endif()
     endif()
 
@@ -286,6 +386,11 @@ endfunction()
 
 message(STATUS "CONFIG_TARGET_PLATFORM = ${CONFIG_TARGET_PLATFORM}")
 
+# Check for environment variable that may be assigned to macros
+ENVIRONMENT_VAR_TO_MACRO("GENERATE_MACHINE_PARSEABLE_REPORT" "1")
+ENVIRONMENT_VAR_TO_MACRO("WOLFSSL_BENCHMARK_FIXED_CSV"       "1")
+
+# Optional variable inspection
 if (0)
     get_cmake_property(_variableNames VARIABLES)
     list (SORT _variableNames)
@@ -302,15 +407,20 @@ endif()
 
 if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
     # There's no esp_timer, no driver components for the ESP8266
-    message(STATUS "Early expansion EXCLUDES esp_timer: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion EXCLUDES esp_timer for esp8266: ${THIS_INCLUDE_TIMER}")
-    message(STATUS "Early expansion EXCLUDES driver: ${THIS_INCLUDE_DRIVER}")
+    message(STATUS "Early expansion EXCLUDES driver for esp8266: ${THIS_INCLUDE_DRIVER}")
     set(THIS_INCLUDE_TIMER "")
     set(THIS_INCLUDE_DRIVER "")
+    set(THIS_ESP_TLS "")
 else()
     message(STATUS "Early expansion includes esp_timer: ${THIS_INCLUDE_TIMER}")
     message(STATUS "Early expansion includes driver: ${THIS_INCLUDE_DRIVER}")
     set(THIS_INCLUDE_TIMER "esp_timer")
     set(THIS_INCLUDE_DRIVER "driver")
+    set(THIS_ESP_TLS "esp-tls")
+    # Let the app know that we've included the esp-tls component requirement.
+    # This is critical for use the the esp-tls component. See wolfssl esp_crt_bundle.c file.
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_REQUIRED_ESP_TLS=1")
 endif()
 
 if(CMAKE_BUILD_EARLY_EXPANSION)
@@ -318,8 +428,9 @@ if(CMAKE_BUILD_EARLY_EXPANSION)
     idf_component_register(
                             REQUIRES "${COMPONENT_REQUIRES}"
                             PRIV_REQUIRES # esp_hw_support
-                                          ${THIS_INCLUDE_TIMER}
+                                          "${THIS_ESP_TLS}"
-                                          ${THIS_INCLUDE_DRIVER} # this will typically only be needed for wolfSSL benchmark
+                                          "${THIS_INCLUDE_TIMER}"
+                                          "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
                            )
 
 else()
@@ -328,6 +439,15 @@ else()
     message(STATUS "wolfssl component config:")
     message(STATUS "************************************************************************************************")
 
+    if ( "${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+        # There's no esp_timer, no driver components for the ESP8266
+        set(THIS_INCLUDE_TIMER "")
+        set(THIS_INCLUDE_DRIVER "")
+    else()
+        set(THIS_INCLUDE_TIMER "esp_timer")
+        set(THIS_INCLUDE_DRIVER "driver")
+    endif()
+
     # search for wolfSSL
     FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
     if(WOLFSSL_ROOT)
@@ -341,7 +461,9 @@ else()
             # Abort CMake after fatal error.
         endif()
     else()
-        message(STATUS "Searching for wolfSL source code...")
+        message(STATUS "Source code for wolfSSL still not found.")
+        message(STATUS "Searching from project home: ${CMAKE_HOME_DIRECTORY} ...")
+        set(WOLFSSL_ROOT "${CMAKE_HOME_DIRECTORY}")
         FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
     endif()
 
@@ -349,11 +471,18 @@ else()
     if(WOLFSSL_ROOT)
         message(STATUS "Confirmed wolfssl directory at: ${WOLFSSL_ROOT}")
     else()
-        message(STATUS "Failed: wolfssl directory not found.")
+        # Try to allow a more intuitive error that the source code was not found in cmake:
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_WARNING_SOURCE_NOT_FOUND")
+
+        message(STATUS "Failed: wolfssl source code directory not found.")
         # Abort. We need wolfssl _somewhere_.
-        message(FATAL_ERROR "Could not find wolfssl in any parent directory named wolfssl-${THIS_USER}, wolfssl-master, or wolfssl.\n"
+        message(STATUS "")
-                            "Try setting WOLFSSL_ROOT environment variable, cmake variable in project, copy source, or use managed components.")
+        message(STATUS "")
-        # Abort CMake after fatal error.
+        message(STATUS "Could not find wolfssl in any parent directory named wolfssl-${THIS_USER}, wolfssl-master, or wolfssl.\n"
+                       "Try setting WOLFSSL_ROOT environment variable, cmake variable in project, copy source, or use managed components.")
+        message(STATUS "")
+        message(STATUS "")
+        # Abort CMake after fatal error. (or not?)
     endif()
 
     set(INCLUDE_PATH ${WOLFSSL_ROOT})
@@ -379,22 +508,24 @@ else()
         endif()
     endif()
 
+    message(STATUS "WOLFSSL_EXTRA_PROJECT_DIR = ${WOLFSSL_EXTRA_PROJECT_DIR}")
     set(COMPONENT_SRCDIRS "\"${WOLFSSL_ROOT}/src/\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif\""
+                          "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/atmel\""
                           "\"${WOLFSSL_EXTRA_PROJECT_DIR}\""
                          ) # COMPONENT_SRCDIRS
 
     message(STATUS "This COMPONENT_SRCDIRS = ${COMPONENT_SRCDIRS}")
 
-    # wolfSSL user_settings.h is in the local project.
+    # wolfSSL user_settings.h may be in the local project.
+    # TODO check if exists and possibly set to ESP-IDF
     set(WOLFSSL_PROJECT_DIR "${CMAKE_HOME_DIRECTORY}/components/wolfssl")
-    # add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${WOLFSSL_PROJECT_DIR}/include/user_settings.h")
 
     string(REPLACE "/" "//" STR_WOLFSSL_PROJECT_DIR "${WOLFSSL_PROJECT_DIR}")
-    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${STR_WOLFSSL_PROJECT_DIR}//include//user_settings.h")
+    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${STR_WOLFSSL_PROJECT_DIR}/include/user_settings.h")
-
+    message(STATUS "Added definition for user_settings.h: -DWOLFSSL_USER_SETTINGS_DIR=\"${STR_WOLFSSL_PROJECT_DIR}//include//user_settings.h\"")
     # Espressif may take several passes through this makefile. Check to see if we found IDF
     string(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "" WOLFSSL_FOUND_IDF)
 
@@ -427,8 +558,7 @@ else()
         message(STATUS "**************************************************************************************")
         message(STATUS "")
 
-        message(FATAL_ERROR "Please use wolfSSL in either local project or Espressif components, but not both.")
+        message(STATUS "Please use wolfSSL in either local project or Espressif components, but not both.")
-        # Abort CMake after fatal error.
 
         # Optional: if you change the above FATAL_ERROR to STATUS you can warn at runtime with this macro definition:
         set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
@@ -536,7 +666,9 @@ else()
     # depending on the environment, we may need to swap backslashes with forward slashes
     string(REPLACE "\\" "/" RTOS_IDF_PATH "$ENV{IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
 
-    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	if(WOLFSSL_ROOT)
+	    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	endif()
 
     if(IS_DIRECTORY "${RTOS_IDF_PATH}")
         message(STATUS "Found current RTOS path: ${RTOS_IDF_PATH}")
@@ -552,7 +684,7 @@ else()
     message(STATUS "THIS_IDF_PATH = $THIS_IDF_PATH")
     # wolfSSL-specific include directories
     set(COMPONENT_ADD_INCLUDEDIRS
-        "./include" # this is the location of wolfssl user_settings.h
+        "./include" # this is the location of local project wolfssl user_settings.h
         "\"${WOLFSSL_ROOT}/\""
         "\"${WOLFSSL_ROOT}/wolfssl/\""
         "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/\""
@@ -601,6 +733,7 @@ else()
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_cortexm.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64_asm.S\""
+        "\"${WOLFSSL_ROOT}/examples\"" # Examples are distributed in Managed Components, but not part of a project.
         "\"${EXCLUDE_ASM}\""
         )
 
@@ -622,15 +755,120 @@ else()
     # see https://docs.espressif.com/projects/esp-idf/en/stable/esp32/migration-guides/release-5.x/build-system.html?highlight=space%20path
     #
     set(EXTRA_COMPONENT_DIRS "${COMPONENT_SRCDIRS}")
-    idf_component_register(
+
-                            SRC_DIRS "${COMPONENT_SRCDIRS}"
+    if(WOLFSSL_ROOT)
-                            INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
+        # Only register the component if we found wolfSSL source.
-                            REQUIRES "${COMPONENT_REQUIRES}"
+        # This is important to allow Cmake to finish to completion, otherwise the UI
-                            EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+        # may not be able to display the Kconfig settings to fix a bad or missing source.
-                            PRIV_REQUIRES
+        idf_component_register(
-                              "${THIS_INCLUDE_TIMER}"
+                                SRC_DIRS "${COMPONENT_SRCDIRS}"
-                              "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
+                                INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
-                           )
+                                REQUIRES "${COMPONENT_REQUIRES}"
+                                EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+                                PRIV_REQUIRES
+                                  "${THIS_ESP_TLS}"
+                                  "${THIS_INCLUDE_TIMER}"
+                                  "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
+                               )
+    else()
+        # Register the component simply to allow CMake to complete, but there's no wolfSSL source.
+        # Expect many other errors, but the project should at least be loadable and UI can edit Kconfig settings.
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component not registered as no source code found (WOLFSSL_ROOT is blank)")
+    endif()
+
+# function(WOLFSSL_INIT_CERT_BUNDLE)
+if( CONFIG_WOLFSSL_CERTIFICATE_BUNDLE
+    AND NOT CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+    AND NOT ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+  )
+    if (CMAKE_BUILD_EARLY_EXPANSION)
+        message(ERROR "Bundle Cert initialization must occur during CMAKE_BUILD_EARLY_EXPANSION")
+    endif()
+    # reminder: we need a value for wolfSSL root first!
+    if( "${WOLFSSL_ROOT}" STREQUAL "" )
+        message(ERROR "Certificate bundles need a value for WOLFSSL_ROOT")
+    endif()
+    set(WOLFSSL_ESP_CRT_BUNDLE_DIR ${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle)
+    message(STATUS "WOLFSSL_ESP_CRT_BUNDLE_DIR=${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    if(EXISTS "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+        set(bundle_name "x509_crt_bundle_wolfssl")
+
+        # For now the certs are in the same directory
+        set(DEFAULT_CRT_DIR "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+
+        # Generate custom certificate bundle using the generate_cert_bundle utility
+        set(GENERATE_CERT_BUNDLEPY ${python} ${WOLFSSL_ESP_CRT_BUNDLE_DIR}/gen_crt_bundle.py)
+
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+        elseif(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+            list(APPEND args --filter ${DEFAULT_CRT_DIR}/cmn_crt_authorities.csv)
+        endif()
+
+        # Add deprecated root certs if enabled. This config is not visible if the default cert
+        # bundle is not selected
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_deprecated.pem)
+        endif()
+
+        if(CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE)
+            get_filename_component(custom_bundle_path
+              ${CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH} ABSOLUTE BASE_DIR "${project_dir}")
+            list(APPEND crt_paths ${custom_bundle_path})
+            message(STATUS "Using a custom wolfSSL bundle path: ${custom_bundle_path}")
+        else()
+            message(STATUS "Not using a custom wolfSSL bundle path.")
+        endif()
+        list(APPEND args --input ${crt_paths} -q)
+
+        message(STATUS "CMAKE_CURRENT_BINARY_DIR: ${CMAKE_CURRENT_BINARY_DIR}")
+        get_filename_component(crt_bundle
+            ${bundle_name}
+            ABSOLUTE BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}")
+
+        message(STATUS "Setting up bundle generate: ${GENERATE_CERT_BUNDLEPY} ${args}")
+        message(STATUS "Depends on custom bundle path: ${custom_bundle_path}")
+        message(STATUS "crt_bundle ${crt_bundle}")
+        message(STATUS "COMPONENT_LIB ${COMPONENT_LIB}")
+        message(STATUS "GENERATE_CERT_BUNDLEPY ${GENERATE_CERT_BUNDLEPY}")
+        message(STATUS "args ${args}")
+        message(STATUS "cert_bundle ${cert_bundle}")
+
+        # Generate bundle according to config
+        # File is generated at build time, not cmake load
+        add_custom_command(OUTPUT ${crt_bundle}
+            COMMAND ${GENERATE_CERT_BUNDLEPY} ARGS ${args}
+            DEPENDS ${custom_bundle_path}
+            VERBATIM)
+
+        if(EXISTS "${crt_bundle}")
+            message(STATUS "Bundle file exists from prior build: ${crt_bundle}")
+        else()
+            message(STATUS "Bundle file expected during next build: ${crt_bundle}")
+        endif()
+
+        # Reminder the file is generated at build time, not cmake load time.
+        message(STATUS "wolfSSL Cert Bundle File to be created at build time in: ${crt_bundle}")
+
+        add_custom_target(custom_wolfssl_bundle DEPENDS ${cert_bundle})
+
+        # the wolfSSL crtificate bundle is baked into wolfSSL
+        add_dependencies(${COMPONENT_LIB} custom_wolfssl_bundle)
+
+        # COMPONENT_LIB may vary: __idf_wolfssl, __idf_esp_wolfssl, etc
+        # target_add_binary_data(__idf_wolfssl ${crt_bundle} BINARY)
+        target_add_binary_data(${COMPONENT_LIB} ${crt_bundle} BINARY)
+        set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+                     APPEND PROPERTY ADDITIONAL_CLEAN_FILES
+                     "${crt_bundle}")
+    else()
+        message(STATUS "WARNING: CONFIG_WOLFSSL_CERTIFICATE_BUNDLE enabled but directory not found: ${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    endif()
+endif()
+
+# endfunction() # WOLFSSL_INIT_CERT_BUNDLE
 
     # Some optional diagnostics. Verbose ones are truncated.
     if (VERBOSE_COMPONENT_MESSAGES)
@@ -662,6 +900,12 @@ else()
     endif()
 
     # target_sources(wolfssl PRIVATE  "\"${WOLFSSL_ROOT}/wolfssl/\""  "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt\"")
+    message(STATUS "DETECTED_PROJECT_NAME=${CMAKE_PROJECT_NAME}")
+    message(STATUS "COMPONENT_TARGET=${COMPONENT_TARGET}")
+    target_compile_definitions(${COMPONENT_TARGET} PRIVATE DETECTED_PROJECT_NAME="${CMAKE_PROJECT_NAME}")
+    if( "${CMAKE_PROJECT_NAME}" STREQUAL "esp_http_client_example" )
+        target_compile_definitions(${COMPONENT_TARGET} PRIVATE APP_ESP_HTTP_CLIENT_EXAMPLE="y")
+    endif()
 
 endif() # CMAKE_BUILD_EARLY_EXPANSION
 
@@ -717,33 +961,80 @@ endfunction() # LIBWOLFSSL_SAVE_INFO
 
 # create some programmatic #define values that will be used by ShowExtendedSystemInfo().
 # see wolfcrypt\src\port\Espressif\esp32_utl.c
-if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+if(NOT CMAKE_BUILD_EARLY_EXPANSION AND WOLFSSL_ROOT)
     set (git_cmd "git")
     message(STATUS "Adding macro definitions:")
 
     # LIBWOLFSSL_VERSION_GIT_ORIGIN: git config --get remote.origin.url
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_ORIGIN "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_BRANCH: git rev-parse --abbrev-ref HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_BRANCH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH: git rev-parse HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_SHORT_HASH: git rev-parse --short HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH_DATE git show --no-patch --no-notes --pretty=\'\%cd\'
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd}
+                    "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
 
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_WOLFSSL_ROOT "${WOLFSSL_ROOT}" "${TMP_RES}")
 
-    message(STATUS "************************************************************************************************")
-    message(STATUS "wolfssl component config complete!")
-    message(STATUS "************************************************************************************************")
 endif()
+
+# Ensure flag "-DWOLFSSL_ESPIDF" is already in CMAKE_C_FLAGS if not yet found from project
+string(FIND "${CMAKE_C_FLAGS}" "-DWOLFSSL_ESPIDF" FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF)
+
+if(FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF EQUAL -1)
+    # Flag not found, append it
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_ESPIDF")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+endif()
+
+if(WOLFSSL_ROOT)
+    message(STATUS "Using wolfSSL in ${WOLFSSL_ROOT}")
+
+    # PlatformIO does not process script from from the Espressif cmake process.
+    # We need to know where wolfSSL source code was found, so save it in the
+    # PIO_WOLFSSL_ROOT environment variable to later be read by extra_script.py
+
+    set(ENV{PIO_WOLFSSL_ROOT} "${WOLFSSL_ROOT}")
+    message(STATUS "PIO_WOLFSSL_ROOT =  $ENV{PIO_WOLFSSL_ROOT}")
+    message(STATUS "PLATFORMIO_BUILD_DIR = $ENV{PLATFORMIO_BUILD_DIR}")
+    # See esp-tls Kconfig; menu "ESP-TLS", ESP_TLS_LIBRARY_CHOOSE
+    if(CONFIG_ESP_TLS_USING_WOLFSSL)
+        if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+            message(STATUS "This version of wolfSSL is not supported on the ESP8266 esp-tls at this time. Check ESP-TLS config")
+        else()
+            message(STATUS "wolfSSL will be used for ESP-TLS")
+        endif()
+    else()
+        message(STATUS "WARNING: wolfSSL NOT selected for ESP-TLS. Features and performance will be limited.")
+    endif()
+else()
+    message(STATUS "")
+    message(STATUS "Consider setting WOLFSSL_ROOT environment variable, use Kconfig setting, or set manually in this cmake file, above.")
+    message(STATUS "")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "ERROR: Could not find wolfSSL Source Code")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+endif()
+
+message(STATUS "************************************************************************************************")
+message(STATUS "wolfSSL component config complete!")
+message(STATUS "************************************************************************************************")

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/Kconfig

@@ -0,0 +1,523 @@
+# Kconfig template
+#
+# Copyright (C) 2006-2024 wolfSSL Inc.  All rights reserved.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+
+# Kconfig File Version 5.7.2.001 for esp-idf integration
+
+# Kconfig Format Rules
+#
+# See:
+#  https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/kconfig.html
+#
+# Format rules for Kconfig files are as follows:
+#
+# Option names in any menus should have consistent prefixes. The prefix
+# currently should have at least 3 characters.
+#
+# The unit of indentation should be 4 spaces. All sub-items belonging to a
+# parent item are indented by one level deeper. For example, menu is indented
+# by 0 spaces, config menu by 4 spaces, help in config by 8 spaces, and the
+# text under help by 12 spaces.
+#
+# No trailing spaces are allowed at the end of the lines.
+#
+# The maximum length of options is NOT 50 characters as documented.
+#   kconfcheck will complain that options should be 40 at most.
+#
+# Fix option lengths first. Superfluous errors on other lines may occur.
+#
+# The maximum length of lines is 120 characters.
+#
+# python -m kconfcheck <path_to_kconfig_file>
+#
+# ---------------------------------------------------------------------------------------------------------------------
+# Begin main wolfSSL configuration menu
+# ---------------------------------------------------------------------------------------------------------------------
+#   See ESP-IDF esp-tls component for config TLS_STACK_WOLFSSL
+
+menu "wolfSSL"
+
+    menu "Hardening"
+        config ESP_WOLFSSL_WC_NO_HARDEN
+            bool "Disable wolfSSL hardening"
+            default n
+            help
+                Sets WC_NO_HARDEN
+
+        config ESP_WOLFSSL_TFM_TIMING_RESISTANT
+            bool "Enable TFM Timing Resistant Code"
+            default n
+            help
+                Sets TFM_TIMING_RESISTANT.
+
+    endmenu # Hardening
+
+    config ESP_WOLFSSL_ENABLE_BENCHMARK
+        bool "Enable wolfSSL Benchmark Library"
+        default n
+        help
+            Enables wolfcrypt/benchmark/benchmark.c code for benchmark metrics. Disables NO_CRYPT_BENCHMARK.
+
+
+    menu "Benchmark Debug"
+        config ESP_DEBUG_WOLFSSL_BENCHMARK_TIMING
+            bool "Enable benchmark timing debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Enable wolfssl debug for benchmark metric timing (CPU Cycles, RTOS ticks, etc).
+
+        config ESP_WOLFSSL_BENCHMARK_TIMER_DEBUG
+            bool "Enable benchmark timer debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Turn on timer debugging (used when CPU cycles not available)
+
+    endmenu # Benchmark Debug
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # wolfCrypt Test
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ENABLE_TEST
+        bool "Enable wolfCrypt Test Library"
+        default n
+        help
+            Enables wolfcrypt/test/test.c code for testing. Disables NO_CRYPT_TEST.
+
+    menu "wolfCrypt tests"
+        config WOLFSSL_HAVE_WOLFCRYPT_TEST_OPTIONS
+            bool "Enable wolfCrypt Test Options"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables HAVE_WOLFCRYPT_TEST_OPTIONS
+
+        config TEST_ESPIDF_ALL_WOLFSSL
+            bool "Enable all features to use in tests"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables TEST_ESPIDF_ALL_WOLFSSL
+
+    endmenu # wolfCrypt tests
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # Apple HomeKit Options
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Apple HomeKit"
+        config WOLFSSL_APPLE_HOMEKIT
+            bool "Enable Apple HomeKit options"
+            default n
+            help
+                Enables FP_MAX_BITS (8192 * 2), SRP, ChaCha, Poly1305, Base64 encoding needed for Apple HomeKit.
+    endmenu # Apple HomeKit
+    # -----------------------------------------------------------------------------------------------------------------
+
+    config ESP_WOLFSSL_DISABLE_MY_ECC
+        bool "Disable ECC in my project"
+        default "n"
+        help
+            ECC is enabled by default. Select this option to disable.
+
+    config ESP_WOLFSSL_ENABLE_MY_USE_RSA
+        bool "Enable RSA in my project"
+        default "n"
+        help
+            RSA is disabled by default. Select this option to enable.
+
+    config ESP_WOLFSSL_BENCHMARK
+        bool "Enable wolfSSL Benchmark"
+        default n
+        help
+            Enables user settings relevant to benchmark code
+
+    config ESP_TLS_USING_WOLFSSL_SPECIFIED
+        bool "Use the specified wolfssl for ESP-TLS"
+        default Y
+        help
+            Includes wolfSSL from specified directory (not using esp-wolfssl).
+
+    config ESP_WOLFSSL_NO_USE_FAST_MATH
+        bool "Disable FAST_MATH library and all ESP32 Hardware Acceleration"
+        select ESP_WOLFSSL_NO_HW
+        select ESP_WOLFSSL_NO_HW_AES
+        select ESP_WOLFSSL_NO_HW_HASH
+        select ESP_WOLFSSL_NO_HW_RSA_PRI
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+
+    menu "Protocol Config"
+        config WOLFSSL_HAVE_ALPN
+            bool "Enable ALPN (Application Layer Protocol Negotiation) in wolfSSL"
+            default y
+
+        config WOLFSSL_ALLOW_TLS13
+            bool "Allow TLS 1.3"
+            default y
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_ALLOW_TLS12
+            bool "Allow TLS 1.2"
+            default n
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_HAVE_TLS_EXTENSIONS
+            bool "Enable TLS Extensions"
+            default y
+            help
+                Sets HAVE_TLS_EXTENSIONS which is needed for TLS 1.3, SNI, ALPN, and more.
+
+        config WOLFSSL_ALT_CERT_CHAINS
+            bool "Enable Alternate Certificate Chains"
+            default n
+            help
+                The option relaxes the default strict wolfSSL certificate chain processing. This
+                will typically need to be enabled when loading only a CA file. Typically solves
+                the -188 ASN_NO_SIGNER_E error. Use with caution.
+
+        config WOLFSSL_HAVE_OCSP
+            bool "Enable OCSP (Online Certificate Status Protocol) in wolfSSL"
+            default n
+            help
+                Sets HAVE_OCSP
+
+    endmenu # Protocol Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config TLS_STACK_WOLFSSL
+        # Invisible option that locks TLS_STACK_WOLFSSL to ESP_TLS_USING_WOLFSSL
+        bool
+        default n
+        select FREERTOS_ENABLE_BACKWARD_COMPATIBILITY
+        help
+            Includes wolfSSL in ESP-TLS so that it can be compiled with wolfSSL as its SSL/TLS library.
+            Enabled when wolfSSL is selected in ESP_TLS_LIBRARY_CHOOSE.
+
+    menu "wolfSSL ESP-TLS"
+        depends on ESP_TLS_USING_WOLFSSL
+
+        menu "Certificate Bundle"
+            depends on ESP_TLS_USING_WOLFSSL
+
+            config WOLFSSL_CERTIFICATE_BUNDLE
+                bool "Enable trusted root certificate bundle"
+                default y if ESP_TLS_USING_WOLFSSL
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Enable support for large number of default root certificates
+
+                    When enabled this option allows user to store default as well
+                    as customer specific root certificates in compressed format rather
+                    than storing full certificate. For the root certificates the public key and the subject name
+                    will be stored.
+
+            config WOLFSSL_NO_ASN_STRICT
+                bool "Relax Certificate ASN Strict Checks"
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Allows sub-optimal certificate ASN checks. Unless using a bundle with known issues,
+                    it is recommended to NOT enable this.
+
+            config WOLFSSL_ASN_ALLOW_0_SERIAL
+                bool "Allow cert missing an ASN Serial Number"
+                default y
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Although not recommended, there may be certificates in the bundle that are missing
+                    a serial number. This option allows the missing value without having to fully
+                    disable strict ASN checking with WOLFSSL_NO_ASN_STRICT.
+
+            choice WOLFSSL_DEFAULT_CERTIFICATE_BUNDLE
+                bool "Default certificate bundle options"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+                    bool "Use the full default certificate bundle"
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN
+                    bool "Use only the most common certificates from the default bundles"
+                    help
+                        Use only the most common certificates from the default bundles, reducing the size with 50%,
+                        while still having around 99% coverage.
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                    bool "Do not use the default certificate bundle"
+            endchoice
+
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default n
+                bool "Add custom certificates to the default bundle"
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH
+                depends on WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                string "Custom certificate bundle path"
+                help
+                    Name of the custom certificate directory or file. This path is evaluated
+                    relative to the project root directory.
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST
+                bool "Add deprecated root certificates"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL && !WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                help
+                    Include the deprecated list of root certificates in the bundle.
+                    This list gets updated when a certificate is removed from the Mozilla's
+                    NSS root certificate store. This config can be enabled if you would like
+                    to ensure that none of the certificates that were deployed in the product
+                    are affected because of the update to bundle. In turn, enabling this
+                    config keeps expired, retracted certificates in the bundle and it may
+                    pose a security risk.
+
+                    - Deprecated cert list may grow based based on sync with upstream bundle
+                    - Deprecated certs would be be removed in ESP-IDF (next) major release
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_MAX_CERTS
+                int "Maximum no of certificates allowed in certificate bundle"
+                default 200
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+
+        endmenu
+    endmenu # wolfSSL ESP-TLS
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+        bool "Modify default hardware acceleration settings"
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+            Typically used for debugging, analysis, or optimizations. The default
+            hardware acceleration features can be each manually adjusted.
+
+    menu "wolfSSL Hardware Acceleration"
+
+        config ESP_WOLFSSL_NO_ESP32_CRYPT
+            bool "Disable all ESP32 Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_AES
+            select ESP_WOLFSSL_NO_HW_HASH
+            select ESP_WOLFSSL_NO_HW_RSA_PRI
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_ESP32_CRYPT.
+                Consider disabling FASTMATH (other libraries are faster in software and smaller)
+
+        config ESP_WOLFSSL_NO_HW_AES
+            bool "Disable all ESP32 AES Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.When selected defines: NO_HW_AES
+
+        config ESP_WOLFSSL_NO_HW_HASH
+            bool "Disable all ESP32 SHA Hash Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_HASH
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI
+            bool "Disable all ESP32 RSA Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            bool "Disable all ESP32 Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MP_MUL
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            bool "Disable all ESP32 Modular Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MULMOD
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            bool "Disable all ESP32 RSA Exponential Math Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.
+                Select this option to force disable: NO_HW_RSA_PRI_EXPTMOD
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
+            bool "Enable debugging of RSA Multiplication operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                multiplication operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+            bool "Enable debugging of RSA Modular operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                modular math operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+    endmenu # wolfSSL Hardware Acceleration
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Experimental Options"
+
+        config ESP_WOLFSSL_EXPERIMENTAL_SETTINGS
+            bool "Enable wolfSSL Experimental Settings"
+            default n
+            help
+                Enables experimental settings for wolfSSL. See documentation.
+
+        config ESP_WOLFSSL_ENABLE_KYBER
+            bool "Enable wolfSSL Kyber"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+    endmenu # wolfSSL Experimental Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Debug Options"
+        config ESP_WOLFSSL_DEBUG_WOLFSSL
+            bool "Enable wolfSSL Debugging"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+        config ESP_WOLFSSL_TEST_LOOP
+            bool "Run test apps in a loop until failure"
+            default y
+            help
+                Enable a loop wrapper for benchmark, http_client, and wolfssl test apps.
+
+    endmenu # wolfSSL Debug Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Customization"
+        config CUSTOM_SETTING_WOLFSSL_ROOT
+            string "Enter a path for wolfSSL source code"
+            default "~/workspace/wolfssl"
+            help
+                This option lets you specify a directory for the wolfSSL source code (typically a git clone).
+                Enter the path using forward slashes (e.g., C:/myfolder/mysubfolder) or double backslashes
+                (e.g., C:\\myfolder\\mysubfolder).
+
+    endmenu # wolfSSL Customization
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Component Config"
+        config IGNORE_ESP_IDF_WOLFSSL_COMPONENT
+            bool "Ignore the ESP-IDF component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the esp-idf/components directory. Requires wolfssl as a local component.
+
+        config IGNORE_LOCAL_WOLFSSL_COMPONENT
+            bool "Ignore the local component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the local project components directory.
+                Requires wolfssl as a ESP-IDF component.
+
+    endmenu # Component Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Utility Config"
+        config USE_WOLFSSL_ESP_SDK_TIME
+            bool "Enable wolfSSL time helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+        config USE_WOLFSSL_ESP_SDK_WIFI
+            bool "Enable wolfSSL WiFi helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+    endmenu # Utility Config
+endmenu # wolfSSL
+# ---------------------------------------------------------------------------------------------------------------------
+
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfSSH"
+    config ESP_ENABLE_WOLFSSH
+        bool "Enable wolfSSH options"
+        default n
+        help
+            Enables WOLFSSH_TERM, WOLFSSL_KEY_GEN, WOLFSSL_PTHREADS, WOLFSSH_TEST_SERVER, WOLFSSH_TEST_THREADING
+
+    config ESP_WOLFSSL_DEBUG_WOLFSSH
+        bool "Enable wolfSSH debugging"
+        default n
+        help
+            Enable wolfSSH debugging macro. See user_settings.h
+
+endmenu # wolfSSH
+# ---------------------------------------------------------------------------------------------------------------------
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfMQTT"
+    config ESP_ENABLE_WOLFMQTT
+        bool "Enable wolfMQTT options"
+        default n
+        help
+            Enables WOLFMQTT
+
+    config ESP_WOLFSSL_DEBUG_WOLFMQTT
+        bool "Enable wolfMQTT debugging"
+        default n
+        help
+            Enable wolfMQTT debugging macro. See user_settings.h
+
+endmenu # wolfMQTT
+# ---------------------------------------------------------------------------------------------------------------------

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/README.md

@@ -0,0 +1,162 @@
+# wolfSSL Espressif Component
+
+This is the directory for wolfSSL as an Espressif ESP-IDF component.
+
+Other options are available, such as installing wolfSSL as a local _project_ component using the [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/).
+
+Enabling this wolfSSL ESP-IDF component allows other ESP-IDF libraries such as those that depend on [ESP-TLS](https://github.com/espressif/esp-idf/tree/master/components/esp-tls)
+to also use the wolfSSL library. (See [github.com/wolfSSL/wolfssl](https://github.com/wolfSSL/wolfssl))
+
+The wolfSSL source code is not included here. Instead, the `idf.py menuconfig` option can be used to configure the
+`sdkconfig` file setting: `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` to point to the desired wolfSSL code.
+
+## Directory Contents
+
+This directory must contain, at a minimum:
+
+- `CMakeLists.txt`
+- `./include/user_settings.h`
+
+The directory should also contain:
+- `Kconfig`
+- `component.mk`
+
+The directory may contain wolfSSL source, for example with a [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/),
+or if the `setup.sh` script was used from [wolfSSL/IDE/Espressif/ESP-IDF](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF).
+
+
+Under normal circumstances when the wolfSSL source is not included here, the `CMakeLists.txt` will search for it in this order:
+
+- A hard-coded `WOLFSSL_ROOT` cmake variable.
+- `WOLFSSL_ROOT` Environment Variable
+- The `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` value in the `sdkconfig` file, from the `Kconfig` option.
+- Any parent directories, up to the root (if this directory is in the ESP-IDF components)
+- Any parent directories, up to the root (if this directory is a project component)
+
+While recursing up the directory tree, the following names of wolfSSL directories will be considered:
+
+- `wolfssl-[current user name]`
+- `wolfssl-master`
+- `wolfssl`
+
+## Getting Started
+
+See the `Espressif Getting Started Guide`.
+
+```
+# Set environment variable to ESP-IDF location
+# For example, VisualGDB in WSL
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-master/esp-idf/v5.3-master
+
+# Or wherever the ESP-IDF is installed:
+WRK_IDF_PATH=~/esp/esp-idf
+
+echo "Run export.sh from ${WRK_IDF_PATH}"
+. ${WRK_IDF_PATH}/export.sh
+
+cd [your project]
+
+idf.py menuconfig
+```
+
+Enable wolfSSL to be used in the ESP-TLS:
+
+```
+Component config  --->
+    ESP-TLS  --->
+        Choose SSL/TLS library for ESP-TLS (See help for more Info)
+            (X) wolfSSL (License info in wolfSSL directory README)
+```
+
+Adjust wolfSSL settings, such as path to source code as needed:
+
+```
+Component config  --->
+    wolfSSL  --->
+        [*] Include wolfSSL in ESP-TLS
+        [*] Use the specified wolfssl for ESP-TLS
+        (~/workspace/wolfssl) Enter a path for wolfSSL source code
+```
+
+## Configuration
+
+All settings for wolfSSL are adjusted in the [include/user_settings.h](./include/user_settings.h) file.
+
+The `user_settings.h` file should not be included directly. Instead, `#include <wolfssl/wolfcrypt/settings.h>`
+before any other wolfSSL headers, like this:
+
+
+```c
+/* ESP-IDF */
+#include <esp_log.h>
+#include "sdkconfig.h"
+
+/* wolfSSL */
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
+#if defined(WOLFSSL_USER_SETTINGS)
+    #include <wolfssl/wolfcrypt/settings.h>
+    #if defined(WOLFSSL_ESPIDF)
+        #include <wolfssl/version.h>
+        #include <wolfssl/wolfcrypt/types.h>
+        #include <wolfcrypt/test/test.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+    #else
+        #error "Problem with wolfSSL user_settings. "           \
+               "Check components/wolfssl/include "              \
+               "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+               "typically in the component CMakeLists.txt"
+    #endif
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
+#endif
+```
+
+## Examples
+
+See the wolfSSL examples:
+
+- [wolfSSL Core Examples](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples)
+- [wolfSSL Additional Examples](https://github.com/wolfSSL/wolfssl-examples/tree/master/ESP32)
+- [wolfSSH Core Examples](https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples)
+- [wolfSSH Additional Examples](https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif)
+- [wolfMQTT Examples](https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples)
+
+## Platforms
+
+The ESP-IDF wolfSSL is also available for PlatformIO:
+
+- [Release wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl)
+- [Staging / Preview wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl-staging)
+
+The wolfSSL library can also be used for Espressif with Arduino:
+
+- [arduino.cc/reference/en/libraries/wolfssl](https://www.arduino.cc/reference/en/libraries/wolfssl/)
+- [github.com/wolfSSL/Arduino-wolfSSL](https://github.com/wolfSSL/Arduino-wolfSSL)
+
+
+## Additional Information
+
+- [wolfSSL Documentation](https://www.wolfssl.com/documentation/manuals/wolfssl/index.html) and [docs/espressif](https://www.wolfssl.com/docs/espressif/)
+- [wolfSSL FAQ](https://www.wolfssl.com/docs/frequently-asked-questions-faq/)
+- [wolfSSL Products](https://www.wolfssl.com/products/)
+- [www.wolfssl.com/espressif](https://www.wolfssl.com/espressif/)
+- [More...](https://www.wolfssl.com/?s=espressif)
+
+## Contact
+
+Have a specific request or questions? We'd love to hear from you! Please contact us at support@wolfssl.com or open an issue on GitHub.
+
+## Licensing and Support
+
+wolfSSL (formerly known as CyaSSL) and wolfCrypt are either licensed for use under the GPLv2 (or at your option any later version) or a standard commercial license. For our users who cannot use wolfSSL under GPLv2 (or any later version), a commercial license to wolfSSL and wolfCrypt is available.
+
+See the LICENSE.txt, visit wolfssl.com/license, contact us at licensing@wolfssl.com or call +1 425 245 8247
+
+View Commercial Support Options: [wolfssl.com/products/support-and-maintenance](wolfssl.com/products/support-and-maintenance)
+

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/component.mk

@@ -18,6 +18,8 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
 #
 
+$(info ***********  wolfssl component ************)
+
 #
 # Component Makefile
 #
@@ -48,193 +50,246 @@
 # define it here:
 CFLAGS +=-DWOLFSSL_USER_SETTINGS
 
-# In the wolfSSL GitHub examples for Espressif,
+# Note that 4 source files created by autogen are excluded here.
-# the root is 7 directories up from here:
+#
-WOLFSSL_ROOT := ../../../../../../../
+# See these files commented out, below. Adjust as needed for your application:
+#
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o
 
-# NOTE: The wolfSSL include diretory (e.g. user_settings.h) is
+
+# NOTICE: the WOLFSSL_ROOT setting MUST be relative!
+# See https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/api-guides/build-system.html?highlight=must+relative#optional-component-specific-variables
+# In the wolfSSL GitHub examples for Espressif:
+#   https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples
+# When this wolfssl component.mk makefile is in [project]/components/wolfssl
+# The root is 7 directories up from here (the location of of this component.mk):
+WOLFSSL_ROOT := ../../../../../../..
+
+# To set the location of a different location, it is best to use relative paths.
+#
+# Set WOLFSSL_ROOT to a relative path from the current component directory.
+# For example, if the wolfssl_client is copied from the examples to test:
+#
+# cp -r /IDE/Espressif/ESP-IDF/examples/wolfssl_client/* /mnt/c/test/demo
+#
+# we run make in   /mnt/c/test/demo
+# component is in  /mnt/c/test/demo/components/wolfssl
+# wolfssl is in    /mnt/c/workspace/wolfssl-master
+#
+# "/mnt/c" is 4 directories up:
+#             2 for `./test/demo` from where we run `make`, plus
+#             2 more from the location of `component.mk` located
+#               in `[current directory]/components/wolfssl`.
+#
+# Thus we need 4 parent reference to find the relative path to wolfSSL:
+# WOLFSSL_ROOT := ../../../../workspace/wolfssl-master
+
+# Optional CFLAGS (make works without these; for reference only)
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
+
+abs_WOLFSSL_ROOT := $(shell realpath $(WOLFSSL_ROOT))
+
+# print-wolfssl-path-value:
+#	@echo "WOLFSSL_ROOT defined: $(WOLFSSL_ROOT)"
+#	@echo "WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT)"
+
+$(info WOLFSSL_ROOT defined: $(WOLFSSL_ROOT))
+$(info WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT))
+
+# NOTE: The wolfSSL include directory (e.g. user_settings.h) is
 # located HERE in THIS project, and *not* in the wolfSSL root.
 COMPONENT_ADD_INCLUDEDIRS := .
 COMPONENT_ADD_INCLUDEDIRS += include
-COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT).
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/.
-COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)wolfssl
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl
-COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)wolfssl/wolfcrypt
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt
-COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)wolfssl/wolfcrypt/port/Espressif
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
-COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)wolfcrypt/benchmark
 # COMPONENT_ADD_INCLUDEDIRS += $ENV(IDF_PATH)/components/freertos/include/freertos
 # COMPONENT_ADD_INCLUDEDIRS += "$ENV(IDF_PATH)/soc/esp32s3/include/soc"
 
+# wolfSSL
+COMPONENT_SRCDIRS := $(WOLFSSL_ROOT)/src
 
-# WOLFSSL_ROOT := ""
+# wolfcrypt
-COMPONENT_SRCDIRS := $(WOLFSSL_ROOT)src
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src
-COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif
-COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/src/port/atmel
-COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/benchmark
-COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/test
-COMPONENT_SRCDIRS += include
 
-COMPONENT_OBJEXCLUDE := $(WOLFSSL_ROOT)wolfcrypt/src/aes_asm.o
+# Espressif
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)wolfcrypt/src/evp.o
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)wolfcrypt/src/misc.o
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/atmel
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)wolfcrypt/src/sha512_asm.o
+
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)wolfcrypt/src/fe_x25519_asm.o
+COMPONENT_OBJEXCLUDE := $(WOLFSSL_ROOT)/wolfcrypt/src/aes_asm.o
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)wolfcrypt/src/aes_gcm_x86_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
-COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)src/bio.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/misc.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/sha512_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_x25519_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/wolfcrypt/src/aes_gcm_x86_asm.o
+COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT)/src/bio.o
 
 
 ##
 ## wolfSSL
 ##
-COMPONENT_OBJS := $(WOLFSSL_ROOT)src/bio.o
+COMPONENT_OBJS := $(WOLFSSL_ROOT)/src/bio.o
 # COMPONENT_OBJS += src/conf.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/crl.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/crl.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/dtls.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/dtls13.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls13.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/internal.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/internal.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/keys.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/keys.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/ocsp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ocsp.o
 # COMPONENT_OBJS += src/pk.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/quic.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/quic.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/sniffer.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/sniffer.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/ssl.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ssl.o
 # COMPONENT_OBJS += src/ssl_asn1.o
 # COMPONENT_OBJS += src/ssl_bn.o
 # COMPONENT_OBJS += src/ssl_certman.o
 # COMPONENT_OBJS += src/ssl_crypto.o
 # COMPONENT_OBJS += src/ssl_misc.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/tls.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/tls13.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls13.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)src/wolfio.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/wolfio.o
 # COMPONENT_OBJS += src/x509.o
 # COMPONENT_OBJS += src/x509_str.o
 
 ##
 ## wolfcrypt
 ##
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/aes.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/aes.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/arc4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/arc4.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/asm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asm.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/asn.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asn.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/async.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o # autogen exclusion
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/blake2b.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2b.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/blake2s.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2s.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/camellia.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/camellia.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/chacha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/chacha20_poly1305.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha20_poly1305.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/cmac.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cmac.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/coding.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/coding.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/compress.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/compress.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/cpuid.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cpuid.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/cryptocb.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cryptocb.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/curve25519.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve25519.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/curve448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve448.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/des3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/des3.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/dh.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dh.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/dilithium.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dilithium.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/dsa.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dsa.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ecc.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/eccsi.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/eccsi.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ecc_fp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc_fp.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ed25519.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed25519.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ed448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed448.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/error.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/error.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/evp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ext_kyber.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_kyber.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ext_lms.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_lms.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ext_xmss.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_xmss.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/falcon.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/falcon.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/fe_448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_448.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/fe_low_mem.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_low_mem.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/fe_operations.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_operations.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/fips.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/fips_test.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips_test.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ge_448.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_448.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ge_low_mem.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_low_mem.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ge_operations.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_operations.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/hash.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hash.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/hmac.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hmac.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/hpke.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hpke.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/integer.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/integer.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/kdf.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/kdf.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/logging.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/logging.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/md2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md2.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/md4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md4.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/md5.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md5.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/memory.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/memory.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/misc.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/misc.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/pkcs12.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs12.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/pkcs7.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs7.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/poly1305.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/poly1305.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/pwdbased.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pwdbased.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/random.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/random.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/rc2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rc2.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ripemd.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ripemd.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/rsa.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rsa.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sakke.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sakke.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/selftest.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o # autogen exclusion
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sha256.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha256.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sha3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha3.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sha512.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha512.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/signature.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/signature.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/siphash.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/siphash.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sm2.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm2.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sm3.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm3.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sm4.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm4.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sphincs.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sphincs.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_arm32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm32.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_arm64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm64.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_armthumb.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_armthumb.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_c32.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c32.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_c64.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c64.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_cortexm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_cortexm.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_dsp32.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_dsp32.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_int.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_int.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_arm32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm32.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_arm64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm64.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_armthumb.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_armthumb.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_c32.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c32.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_c64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c64.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_cortexm.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_cortexm.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_sm2_x86_64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_x86_64.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/sp_x86_64.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_x86_64.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/srp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/srp.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/tfm.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/tfm.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_dsp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_dsp.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_encrypt.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_encrypt.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_kyber.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_kyber.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_kyber_poly.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_kyber_poly.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_lms.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_lms.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_pkcs11.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_pkcs11.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_port.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_port.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wc_xmss.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_xmss.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wolfcrypt_first.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o # autogen exclusion
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wolfcrypt_last.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o  # autogen exclusion
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wolfevent.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfevent.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/wolfmath.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfmath.o
 
 ##
 ## Espressif
 ##
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp32_aes.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_aes.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp32_mp.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_mp.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp32_sha.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_sha.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp32_util.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_util.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp_sdk_mem_lib.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_mem_lib.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp_sdk_time_lib.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_time_lib.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.o
 
 ##
 ## wolfcrypt benchmark  (optional)
 ##
-COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/benchmark/benchmark.o
+COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark/benchmark.o
+COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
+COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
+
 
 ##
 ## wolfcrypt test (optional)
 ##
-## COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/test/test.o
+## COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/test/test.o
+## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/test
 
 ##
 ## wolfcrypt
 ##
+# COMPONENT_PRIV_INCLUDEDIRS += $(PROJECT_PATH)/components/wolfssl/include
 COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/src
+$(info ********** end wolfssl component **********)

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/include/user_settings.h

@@ -1,4 +1,4 @@
-/* user_settings.h
+/* wolfssl-component include/user_settings.h
  *
  * Copyright (C) 2006-2024 wolfSSL Inc.
  *
@@ -18,19 +18,52 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+#define WOLFSSL_ESPIDF_COMPONENT_VERSION 0x01
+
+/* The Espressif project config file. See also sdkconfig.defaults */
+#include "sdkconfig.h"
 
 /* This user_settings.h is for Espressif ESP-IDF
  *
  * Standardized wolfSSL Espressif ESP32 + ESP8266 user_settings.h V5.7.0-1
  *
- * Do not include any wolfssl headers here
+ * Do not include any wolfssl headers here.
  *
  * When editing this file:
- * ensure wolfssl_test and wolfssl_benchmark settings match.
+ * ensure all examples match. The template example is the reference.
  */
 
-/* The Espressif project config file. See also sdkconfig.defaults */
+/* Naming convention: (see also esp32-crypt.h for the reference source).
-#include "sdkconfig.h"
+ *
+ * CONFIG_
+ *      This prefix indicates the setting came from the sdkconfig / Kconfig.
+ *
+ *      May or may not be related to wolfSSL.
+ *
+ *      The name after this prefix must exactly match that in the Kconfig file.
+ *
+ * WOLFSSL_
+ *      Typical of many, but not all wolfSSL macro names.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      May or may not have a corresponding sdkconfig / Kconfig control.
+ *
+ * ESP_WOLFSSL_
+ *      These are NOT valid wolfSSL macro names. These are names only used in
+ *      the ESP-IDF Kconfig files. When parsed, they will have a "CONFIG_"
+ *      suffix added. See next section.
+ *
+ * CONFIG_ESP_WOLFSSL_
+ *      This is a wolfSSL-specific macro that has been defined in the ESP-IDF
+ *      via the sdkconfig / menuconfig. Any text after this prefix should
+ *      exactly match an existing wolfSSL macro name.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      These macros may also be specific to only the project or environment,
+ *      and possibly not used anywhere else in the wolfSSL libraries.
+ */
 
 /* The Espressif sdkconfig will have chipset info.
 **
@@ -46,33 +79,250 @@
 #undef  WOLFSSL_ESPIDF
 #define WOLFSSL_ESPIDF
 
-/* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+/* Test various user_settings between applications by selecting example apps
-#define NO_ESP_SDK_WIFI
+ * in `idf.py menuconfig` for Example wolfSSL Configuration settings: */
+
+/* Turn on messages that are useful to see only in examples. */
+#define WOLFSSL_EXAMPLE_VERBOSITY
+
+/* Paths can be long, ensure the entire value printed during debug */
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+/* wolfSSL Examples: set macros used in example applications.
+ *
+ * These Settings NOT available in ESP-IDF (e.g. esp-tls)
+ *
+ * Any settings needed by ESP-IDF components should be explicitly set,
+ * and not by these example-specific settings via CONFIG_WOLFSSL_EXAMPLE_n
+ *
+ * ESP-IDF settings should be Kconfig "CONFIG_[name]" values when possible. */
+#if defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/template */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEST)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_test */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define TEST_ESPIDF_ALL_WOLFSSL
+
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_BENCHMARK)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_CLIENT)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_client */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_SERVER)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfSSH Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_echoserver */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP32_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP32/ESP32-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP8266_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP8266/ESP8266-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfMQTT Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/wolfmqtt_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_AWS_IOT_MQTT)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/AWS_IoT_MQTT */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfTPM Examples */
+#elif defined(CONFIG_WOLFTPM_EXAMPLE_NAME_ESPRESSIF)
+    /* See https://github.com/wolfSSL/wolfTPM/tree/master/IDE/Espressif */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Apple HomeKit Examples */
+#elif defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+    /* See https://github.com/AchimPieters/esp32-homekit-demo */
+
+/* no example selected */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_NONE)
+    /* We'll assume the app needs to use wolfSSL sdk lib function */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Other applications detected by cmake */
+#elif defined(APP_ESP_HTTP_CLIENT_EXAMPLE)
+    /* The wolfSSL Version of the client example */
+    #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C2)
+        /* Less memory available, so smaller key sizes: */
+        #define FP_MAX_BITS (4096 * 2)
+    #else
+        #define FP_MAX_BITS (8192 * 2)
+    #endif
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+
+#elif defined(APP_ESP_HTTP_CLIENT)
+    /* The ESP-IDF Version */
+    #define FP_MAX_BITS (8192 * 2)
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+#else
+    #ifdef WOLFSSL_ESPIDF
+        /* #warning "App config undetected" */
+    #endif
+    /* the code is older or does not have application name defined. */
+#endif /* Example wolfSSL Configuration app settings */
 
 /* Experimental Kyber */
-#if 0
+#ifdef CONFIG_WOLFSSL_ENABLE_KYBER
     /* Kyber typically needs a minimum 10K stack */
     #define WOLFSSL_EXPERIMENTAL_SETTINGS
     #define WOLFSSL_HAVE_KYBER
     #define WOLFSSL_WC_KYBER
     #define WOLFSSL_SHA3
+    #if defined(CONFIG_IDF_TARGET_ESP8266)
+        /* With limited RAM, we'll disable some of the Kyber sizes: */
+        #define WOLFSSL_NO_KYBER1024
+        #define WOLFSSL_NO_KYBER768
+        #define NO_SESSION_CACHE
+    #endif
 #endif
 
+/* Pick a cert buffer size: */
+/* #define USE_CERT_BUFFERS_2048 */
+/* #define USE_CERT_BUFFERS_1024 */
+#define USE_CERT_BUFFERS_2048
+
+/* The Espressif sdkconfig will have chipset info.
+**
+** Some possible values:
+**
+**   CONFIG_IDF_TARGET_ESP32
+**   CONFIG_IDF_TARGET_ESP32S2
+**   CONFIG_IDF_TARGET_ESP32S3
+**   CONFIG_IDF_TARGET_ESP32C3
+**   CONFIG_IDF_TARGET_ESP32C6
+*/
+
+/* Optionally enable Apple HomeKit from compiler directive or Kconfig setting */
+#if defined(WOLFSSL_APPLE_HOMEKIT) || defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+     /* SRP is known to need 8K; slow on some devices */
+     #define FP_MAX_BITS (8192 * 2)
+     #define WOLFCRYPT_HAVE_SRP
+     #define HAVE_CHACHA
+     #define HAVE_POLY1305
+     #define WOLFSSL_BASE64_ENCODE
+ #endif /* Apple HomeKit settings */
+
+/* Used by ESP-IDF components: */
+#if defined(CONFIG_ESP_TLS_USING_WOLFSSL)
+    /* The ESP-TLS */
+    #ifndef FP_MAX_BITS
+        #if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+            defined(CONFIG_IDF_TARGET_ESP8684) || \
+            defined(CONFIG_IDF_TARGET_ESP8266)
+            /* Optionally set smaller size here */
+            #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+        #else
+            #define FP_MAX_BITS (4096 * 2)
+        #endif
+    #endif
+    #define HAVE_ALPN
+    #ifndef CONFIG_IDF_TARGET_ESP8266
+        /* Unless installed in the ESP8266 RTOS SDK locally, the wolfSSL
+         * API for SNI will not be seen in the components/esp-tls layer.
+         * Only enable SNI for non-ESP8266 targets by default: */
+        #define HAVE_SNI
+    #endif
+    #define OPENSSL_EXTRA_X509_SMALL
+
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+#endif
+
+/* Optionally enable some wolfSSH settings */
+#if defined(ESP_ENABLE_WOLFSSH) || defined(CONFIG_ESP_ENABLE_WOLFSSH)
+    /* The default SSH Windows size is massive for an embedded target.
+     * Limit it: */
+    #define DEFAULT_WINDOW_SZ 2000
+
+    /* These may be defined in cmake for other examples: */
+    #undef  WOLFSSH_TERM
+    #define WOLFSSH_TERM
+
+    /* optional debug */
+    /* #undef  DEBUG_WOLFSSH */
+    /* #define DEBUG_WOLFSSH */
+
+    #undef  WOLFSSL_KEY_GEN
+    #define WOLFSSL_KEY_GEN
+
+    #undef  WOLFSSL_PTHREADS
+    #define WOLFSSL_PTHREADS
+
+    #define WOLFSSH_TEST_SERVER
+    #define WOLFSSH_TEST_THREADING
+#endif /* ESP_ENABLE_WOLFSSH */
+
+
+/* Not yet using WiFi lib, so don't compile in the esp-sdk-lib WiFi helpers: */
+/* #define USE_WOLFSSL_ESP_SDK_WIFI */
+
 /*
  * ONE of these Espressif chip families will be detected from sdkconfig:
  *
  * WOLFSSL_ESP32
+ * WOLFSSL_ESPWROOM32SE
  * WOLFSSL_ESP8266
+ *
+ * following ifdef detection only for syntax highlighting:
  */
-#undef WOLFSSL_ESPWROOM32SE
+#ifdef WOLFSSL_ESPWROOM32SE
-#undef WOLFSSL_ESP8266
+    #undef WOLFSSL_ESPWROOM32SE
-#undef WOLFSSL_ESP32
+#endif
+#ifdef WOLFSSL_ESP8266
+    #undef WOLFSSL_ESP8266
+#endif
+#ifdef WOLFSSL_ESP32
+    #undef WOLFSSL_ESP32
+#endif
 /* See below for chipset detection from sdkconfig.h */
 
 /* when you want to use SINGLE THREAD. Note Default ESP-IDF is FreeRTOS */
-/* #define SINGLE_THREADED */
+#define SINGLE_THREADED
 
-/* SMALL_SESSION_CACHE saves a lot of RAM for ClientCache and SessionCache.
+/* Small session cache saves a lot of RAM for ClientCache and SessionCache.
  * Memory requirement is about 5KB, otherwise 20K is needed when not specified.
  * If extra small footprint is needed, try MICRO_SESSION_CACHE (< 1K)
  * When really desperate or no TLS used, try NO_SESSION_CACHE.  */
@@ -92,130 +342,6 @@
 /* RSA_LOW_MEM: Half as much memory but twice as slow. */
 #define RSA_LOW_MEM
 
-/* Uncommon settings for testing only */
-#define TEST_ESPIDF_ALL_WOLFSSL
-#ifdef  TEST_ESPIDF_ALL_WOLFSSL
-    #define WOLFSSL_MD2
-    #define HAVE_BLAKE2
-    #define HAVE_BLAKE2B
-    #define HAVE_BLAKE2S
-
-    #define WC_RC2
-    #define WOLFSSL_ALLOW_RC4
-
-    #define HAVE_POLY1305
-
-    #define WOLFSSL_AES_128
-    #define WOLFSSL_AES_OFB
-    #define WOLFSSL_AES_CFB
-    #define WOLFSSL_AES_XTS
-
-    /* #define WC_SRTP_KDF */
-    /* TODO Causes failure with Espressif AES HW Enabled */
-    /* #define HAVE_AES_ECB */
-    /* #define HAVE_AESCCM  */
-    /* TODO sanity check when missing HAVE_AES_ECB */
-    #define WOLFSSL_WOLFSSH
-
-    #define HAVE_AESGCM
-    #define WOLFSSL_AES_COUNTER
-
-    #define HAVE_FFDHE
-    #define HAVE_FFDHE_2048
-    #if defined(CONFIG_IDF_TARGET_ESP8266)
-        /* TODO Full size SRP is disabled on the ESP8266 at this time.
-         * Low memory issue? */
-        #define WOLFCRYPT_HAVE_SRP
-        /* MIN_FFDHE_FP_MAX_BITS = (MIN_FFDHE_BITS * 2); see settings.h */
-        #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
-    #elif defined(CONFIG_IDF_TARGET_ESP32)   || \
-          defined(CONFIG_IDF_TARGET_ESP32S2) || \
-          defined(CONFIG_IDF_TARGET_ESP32S3)
-        /* TODO: SRP Not enabled, known to fail on this target
-         * See https://github.com/wolfSSL/wolfssl/issues/7210 */
-    #elif defined(CONFIG_IDF_TARGET_ESP32C3) || \
-          defined(CONFIG_IDF_TARGET_ESP32H2)
-        /* SRP Known to be working on this target::*/
-        #define WOLFCRYPT_HAVE_SRP
-        #define FP_MAX_BITS (8192 * 2)
-    #else
-        /* For everything else, give a try and see if SRP working: */
-        #define WOLFCRYPT_HAVE_SRP
-        #define FP_MAX_BITS (8192 * 2)
-    #endif
-
-    #define HAVE_DH
-
-    /* TODO: there may be a problem with HAVE_CAMELLIA with HW AES disabled.
-     * Do not define NO_WOLFSSL_ESP32_CRYPT_AES when enabled: */
-    /* #define HAVE_CAMELLIA */
-
-    /* DSA requires old SHA */
-    #define HAVE_DSA
-
-    /* Needs SHA512 ? */
-    #define HAVE_HPKE
-
-    /* Not for Espressif? */
-    #if defined(CONFIG_IDF_TARGET_ESP32C2) || \
-        defined(CONFIG_IDF_TARGET_ESP8684) || \
-        defined(CONFIG_IDF_TARGET_ESP32H2) || \
-        defined(CONFIG_IDF_TARGET_ESP8266)
-
-        #if defined(CONFIG_IDF_TARGET_ESP8266)
-            #undef HAVE_ECC
-            #undef HAVE_ECC_CDH
-            #undef HAVE_CURVE25519
-
-            /* TODO does CHACHA also need alignment? Failing on ESP8266
-             * See SHA256 __attribute__((aligned(4))); and WC_SHA256_ALIGN */
-            #ifdef HAVE_CHACHA
-                #error "HAVE_CHACHA not supported on ESP8266"
-            #endif
-            #ifdef HAVE_XCHACHA
-                #error "HAVE_XCHACHA not supported on ESP8266"
-            #endif
-        #else
-            #define HAVE_XCHACHA
-            #define HAVE_CHACHA
-            /* TODO Not enabled at this time, needs further testing:
-             *   #define WC_SRTP_KDF
-             *   #define HAVE_COMP_KEY
-             *   #define WOLFSSL_HAVE_XMSS
-             */
-        #endif
-        /* TODO AES-EAX not working on this platform */
-
-        /* Optionally disable DH
-         *   #undef HAVE_DH
-         *   #undef HAVE_FFDHE
-         */
-
-        /* ECC_SHAMIR out of memory on ESP32-C2 during ECC  */
-        #ifndef HAVE_ECC
-            #define ECC_SHAMIR
-        #endif
-    #else
-        #define WOLFSSL_AES_EAX
-
-        #define ECC_SHAMIR
-    #endif
-
-    /* Only for WOLFSSL_IMX6_CAAM / WOLFSSL_QNX_CAAM ? */
-    /* #define WOLFSSL_CAAM      */
-    /* #define WOLFSSL_CAAM_BLOB */
-
-    #define WOLFSSL_AES_SIV
-    #define WOLFSSL_CMAC
-
-    #define WOLFSSL_CERT_PIV
-
-    /* HAVE_SCRYPT may turn on HAVE_PBKDF2 see settings.h */
-    /* #define HAVE_SCRYPT */
-    #define SCRYPT_TEST_ALL
-    #define HAVE_X963_KDF
-#endif
-
 /* optionally turn off SHA512/224 SHA512/256 */
 /* #define WOLFSSL_NOSHA512_224 */
 /* #define WOLFSSL_NOSHA512_256 */
@@ -230,14 +356,40 @@
 #define BENCH_EMBEDDED
 
 /* TLS 1.3                                 */
-#define WOLFSSL_TLS13
+#ifdef CONFIG_WOLFSSL_ALLOW_TLS13
-#define HAVE_TLS_EXTENSIONS
+    #define WOLFSSL_TLS13
-#define WC_RSA_PSS
+    #define HAVE_TLS_EXTENSIONS
-#define HAVE_HKDF
+    #define HAVE_HKDF
-#define HAVE_AEAD
-#define HAVE_SUPPORTED_CURVES
 
-#define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+    /* May be required */
+    #ifndef HAVE_AEAD
+    #endif
+
+    /* Required for ECC */
+    #define HAVE_SUPPORTED_CURVES
+
+    /* Required for RSA */
+    #define WC_RSA_PSS
+
+    /* TLS 1.3 normally requires HAVE_FFDHE */
+    #if defined(HAVE_FFDHE_2048) || \
+        defined(HAVE_FFDHE_3072) || \
+        defined(HAVE_FFDHE_4096) || \
+        defined(HAVE_FFDHE_6144) || \
+        defined(HAVE_FFDHE_8192)
+    #else
+        #define HAVE_FFDHE_2048
+        /* #error "TLS 1.3 requires HAVE_FFDHE_[nnnn]" */
+    #endif
+#endif
+
+#if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+    defined(CONFIG_IDF_TARGET_ESP8684)
+    /* Optionally set smaller size here */
+    #define HAVE_FFDHE_4096
+#else
+    #define HAVE_FFDHE_4096
+#endif
 
 #define NO_FILESYSTEM
 
@@ -254,32 +406,67 @@
 /* when you want to use SHA384 */
 #define WOLFSSL_SHA384
 
-/* when you want to use SHA512 */
-#define WOLFSSL_SHA512
-
-/* when you want to use SHA3 */
-#define WOLFSSL_SHA3
-
- /* ED25519 requires SHA512 */
-#define HAVE_ED25519
-
 /* Some features not enabled for ESP8266: */
 #if defined(CONFIG_IDF_TARGET_ESP8266) || \
     defined(CONFIG_IDF_TARGET_ESP32C2)
+    /* Some known low-memory devices have features not enabled by default. */
     /* TODO determine low memory configuration for ECC. */
 #else
-    #define HAVE_ECC
+    /* when you want to use SHA512 */
-    #define HAVE_CURVE25519
+    #define WOLFSSL_SHA512
-    #define CURVE25519_SMALL
+
+    /* when you want to use SHA3 */
+    /* #define WOLFSSL_SHA3 */
+
+    /* ED25519 requires SHA512 */
+    #define HAVE_ED25519
 #endif
 
-#define HAVE_ED25519
+#if defined(CONFIG_IDF_TARGET_ESP8266) || defined(CONFIG_IDF_TARGET_ESP32C2)
+    #define MY_USE_ECC 0
+    #define MY_USE_RSA 1
+#else
+    #define MY_USE_ECC 1
+    #define MY_USE_RSA 0
+#endif
 
-/* Optional OPENSSL compatibility */
+/* We can use either or both ECC and RSA, but must use at least one. */
-#define OPENSSL_EXTRA
+#if MY_USE_ECC || MY_USE_RSA
+    #if MY_USE_ECC
+        /* ---- ECDSA / ECC ---- */
+        #define HAVE_ECC
+        #define HAVE_CURVE25519
+        #define HAVE_ED25519
+        #define WOLFSSL_SHA512
+        /*
+        #define HAVE_ECC384
+        #define CURVE25519_SMALL
+        */
+    #else
+        #define WOLFSSH_NO_ECC
+        /* WOLFSSH_NO_ECDSA is typically defined automatically,
+         * here for clarity: */
+        #define WOLFSSH_NO_ECDSA
+    #endif
+
+    #if MY_USE_RSA
+        /* ---- RSA ----- */
+        /* #define RSA_LOW_MEM */
+
+        /* DH disabled by default, needed if ECDSA/ECC also turned off */
+        #define HAVE_DH
+    #else
+        #define WOLFSSH_NO_RSA
+    #endif
+#else
+    #error "Either RSA or ECC must be enabled"
+#endif
+
+/* Optional OpenSSL compatibility */
+/* #define OPENSSL_EXTRA */
 
 /* #Optional HAVE_PKCS7 */
-#define HAVE_PKCS7
+/* #define HAVE_PKCS7 */
 
 #if defined(HAVE_PKCS7)
     /* HAVE_PKCS7 may enable HAVE_PBKDF2 see settings.h */
@@ -319,8 +506,11 @@
 /* #define XTIME time */
 
 
-/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
+/* Adjust wait-timeout count if you see timeout in RSA HW acceleration.
-#define ESP_RSA_TIMEOUT_CNT    0x349F00
+ * Set to very large number and enable WOLFSSL_HW_METRICS to determine max. */
+#ifndef ESP_RSA_TIMEOUT_CNT
+	#define ESP_RSA_TIMEOUT_CNT 0xFF0000
+#endif
 
 /* hash limit for test.c */
 #define HASH_SIZE_LIMIT
@@ -329,7 +519,7 @@
 #define USE_FAST_MATH
 
 /*****      Use SP_MATH      *****/
-/* #undef USE_FAST_MATH          */
+/* #undef  USE_FAST_MATH         */
 /* #define SP_MATH               */
 /* #define WOLFSSL_SP_MATH_ALL   */
 /* #define WOLFSSL_SP_RISCV32    */
@@ -338,6 +528,14 @@
 /* #undef USE_FAST_MATH          */
 /* #define USE_INTEGER_HEAP_MATH */
 
+/* Just syntax highlighting to check math libraries: */
+#if defined(SP_MATH)               || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_FAST_MATH)         || \
+    defined(WOLFSSL_SP_MATH_ALL)   || \
+    defined(WOLFSSL_SP_RISCV32)
+#endif
 
 #define WOLFSSL_SMALL_STACK
 
@@ -345,18 +543,32 @@
 #define HAVE_VERSION_EXTENDED_INFO
 /* #define HAVE_WC_INTROSPECTION */
 
-#define  HAVE_SESSION_TICKET
+#ifndef NO_SESSION_CACHE
+    #define  HAVE_SESSION_TICKET
+#endif
 
 /* #define HAVE_HASHDRBG */
 
+#if 0
+/* Example for additional cert functions */
 #define WOLFSSL_KEY_GEN
-#define WOLFSSL_CERT_REQ
+    #define WOLFSSL_CERT_REQ
-#define WOLFSSL_CERT_GEN
+    #define WOLFSSL_CERT_GEN
-#define WOLFSSL_CERT_EXT
+    #define WOLFSSL_CERT_EXT
-#define WOLFSSL_SYS_CA_CERTS
+    #define WOLFSSL_SYS_CA_CERTS
 
 
-#define WOLFSSL_CERT_TEXT
+    #define WOLFSSL_CERT_TEXT
+
+    /* command-line options
+    --enable-keygen
+    --enable-certgen
+    --enable-certreq
+    --enable-certext
+    --enable-asn-template
+    */
+
+#endif
 
 #define WOLFSSL_ASN_TEMPLATE
 
@@ -376,10 +588,62 @@
 --enable-asn-template
 */
 
+/* optional SM4 Ciphers. See https://github.com/wolfSSL/wolfsm */
+/*
+#define WOLFSSL_SM2
+#define WOLFSSL_SM3
+#define WOLFSSL_SM4
+*/
+
+#if defined(WOLFSSL_SM2) || defined(WOLFSSL_SM3) || defined(WOLFSSL_SM4)
+    /* SM settings, possible cipher suites:
+
+        TLS13-AES128-GCM-SHA256
+        TLS13-CHACHA20-POLY1305-SHA256
+        TLS13-SM4-GCM-SM3
+        TLS13-SM4-CCM-SM3
+
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CBC-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3:" \
+                                       "TLS13-SM4-CCM-SM3:"
+    */
+
+    #undef  WOLFSSL_BASE16
+    #define WOLFSSL_BASE16 /* required for WOLFSSL_SM2 */
+
+    #undef  WOLFSSL_SM4_ECB
+    #define WOLFSSL_SM4_ECB
+
+    #undef  WOLFSSL_SM4_CBC
+    #define WOLFSSL_SM4_CBC
+
+    #undef  WOLFSSL_SM4_CTR
+    #define WOLFSSL_SM4_CTR
+
+    #undef  WOLFSSL_SM4_GCM
+    #define WOLFSSL_SM4_GCM
+
+    #undef  WOLFSSL_SM4_CCM
+    #define WOLFSSL_SM4_CCM
+
+    #define HAVE_POLY1305
+    #define HAVE_CHACHA
+
+    #undef  HAVE_AESGCM
+    #define HAVE_AESGCM
+#else
+    /* default settings */
+    #define USE_CERT_BUFFERS_2048
+#endif
+
 /* Chipset detection from sdkconfig.h
  * Default is HW enabled unless turned off.
  * Uncomment lines to force SW instead of HW acceleration */
-#if defined(CONFIG_IDF_TARGET_ESP32)
+#if defined(CONFIG_IDF_TARGET_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
     #define WOLFSSL_ESP32
     /*  Alternatively, if there's an ECC Secure Element present: */
     /* #define WOLFSSL_ESPWROOM32SE */
@@ -501,12 +765,16 @@
     #define WOLFSSL_ESP8266
 
     /* There's no hardware encryption on the ESP8266 */
-    /* Consider using the ESP32-C2/C3/C6
+    /* Consider using the ESP32-C2/C3/C6 */
-     * See https://www.espressif.com/en/products/socs/esp32-c2 */
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
     #define NO_WOLFSSL_ESP32_CRYPT_AES
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+    #ifndef FP_MAX_BITS
+        /* FP_MAX_BITS matters in wolfssl_test, not just TLS setting.   */
+        /* MIN_FFDHE_FP_MAX_BITS = (MIN_FFDHE_BITS * 2); see settings.h */
+        #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+    #endif
     /***** END CONFIG_IDF_TARGET_ESP266 *****/
 
 #elif defined(CONFIG_IDF_TARGET_ESP8684)
@@ -518,7 +786,7 @@
     /***** END CONFIG_IDF_TARGET_ESP8684 *****/
 
 #else
-    /* Anything else encountered, disable HW accleration */
+    /* Anything else encountered, disable HW acceleration */
     #warning "Unexpected CONFIG_IDF_TARGET_NN value"
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
@@ -556,18 +824,33 @@
 /* Debug options:
 See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
 
+optionally increase error message size for very long paths.
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+Turn wolfSSL debugging on/off:
+    wolfSSL_Debugging_ON();
+    wolfSSL_Debugging_OFF();
+
 #define ESP_VERIFY_MEMBLOCK
 #define DEBUG_WOLFSSL
 #define DEBUG_WOLFSSL_VERBOSE
 #define DEBUG_WOLFSSL_SHA_MUTEX
+#define WOLFSSL_DEBUG_IGNORE_ASN_TIME
+#define WOLFSSL_DEBUG_CERT_BUNDLE
+#define WOLFSSL_DEBUG_CERT_BUNDLE_NAME
 #define WOLFSSL_ESP32_CRYPT_DEBUG
 #define WOLFSSL_ESP32_CRYPT_HASH_SHA224_DEBUG
 #define NO_RECOVER_SOFTWARE_CALC
 #define WOLFSSL_TEST_STRAY 1
 #define USE_ESP_DPORT_ACCESS_READ_BUFFER
 #define WOLFSSL_ESP32_HW_LOCK_DEBUG
+#define WOLFSSL_DEBUG_MUTEX
 #define WOLFSSL_DEBUG_ESP_RSA_MULM_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
 #define ESP_DISABLE_HW_TASK_LOCK
+#define ESP_MONITOR_HW_TASK_LOCK
+#define USE_ESP_DPORT_ACCESS_READ_BUFFER
 
 See wolfcrypt/benchmark/benchmark.c for debug and other settings:
 
@@ -579,7 +862,8 @@ Turn on timer debugging (used when CPU cycles not available)
 */
 
 /* Pause in a loop rather than exit. */
-#define WOLFSSL_ESPIDF_ERROR_PAUSE
+/* #define WOLFSSL_ESPIDF_ERROR_PAUSE */
+/* #define WOLFSSL_ESP32_HW_LOCK_DEBUG */
 
 #define WOLFSSL_HW_METRICS
 
@@ -628,6 +912,12 @@ Turn on timer debugging (used when CPU cycles not available)
  * There are various certificate examples in this header file:
  * https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/certs_test.h
  *
+ * To use the sample certificates in code (not recommended for production!):
+ *
+ *    #if defined(USE_CERT_BUFFERS_2048) || defined(USE_CERT_BUFFERS_1024)
+ *        #include <wolfssl/certs_test.h>
+ *    #endif
+ *
  * To use the sets of macros below, define *one* of these:
  *
  *    USE_CERT_BUFFERS_1024  - ECC 1024 bit encoded ASN1
@@ -705,6 +995,7 @@ Turn on timer debugging (used when CPU cycles not available)
     #define WOLFSSL_BASE16
 #else
     #if defined(USE_CERT_BUFFERS_2048)
+        #define USE_CERT_BUFFERS_256
         /* Be sure to include in app when using example certs: */
         /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_2048
@@ -726,6 +1017,7 @@ Turn on timer debugging (used when CPU cycles not available)
         #define CTX_CLIENT_KEY_TYPE  WOLFSSL_FILETYPE_ASN1
 
     #elif defined(USE_CERT_BUFFERS_1024)
+        #define USE_CERT_BUFFERS_256
         /* Be sure to include in app when using example certs: */
         /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_1024
@@ -750,3 +1042,34 @@ Turn on timer debugging (used when CPU cycles not available)
         #error "Must define USE_CERT_BUFFERS_2048 or USE_CERT_BUFFERS_1024"
     #endif
 #endif /* Conditional key and cert constant names */
+
+/******************************************************************************
+** Sanity Checks
+******************************************************************************/
+#if defined(CONFIG_ESP_MAIN_TASK_STACK_SIZE)
+    #if defined(WOLFCRYPT_HAVE_SRP)
+        #if defined(FP_MAX_BITS)
+            #if FP_MAX_BITS <  (8192 * 2)
+                #define ESP_SRP_MINIMUM_STACK_8K (24 * 1024)
+            #else
+                #define ESP_SRP_MINIMUM_STACK_8K (28 * 1024)
+            #endif
+        #else
+            #error "Please define FP_MAX_BITS when using WOLFCRYPT_HAVE_SRP."
+        #endif
+
+        #if (CONFIG_ESP_MAIN_TASK_STACK_SIZE < ESP_SRP_MINIMUM_STACK)
+            #warning "WOLFCRYPT_HAVE_SRP enabled with small stack size"
+        #endif
+    #endif
+#else
+    #warning "CONFIG_ESP_MAIN_TASK_STACK_SIZE not defined!"
+#endif
+/* See settings.h for some of the possible hardening options:
+ *
+ *  #define NO_ESPIDF_DEFAULT
+ *  #define WC_NO_CACHE_RESISTANT
+ *  #define WC_AES_BITSLICED
+ *  #define HAVE_AES_ECB
+ *  #define HAVE_AES_DIRECT
+ */

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/CMakeLists.txt

@@ -1,3 +1,5 @@
+# wolfSSL Espressif Example Project/main CMakeLists.txt
+#   v1.1
 #
 # wolfssl benchmark test
 #

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/include/main.h

@@ -1,4 +1,4 @@
-/* benchmark main.h
+/* wolfssl_benchmark main.h
  *
  * Copyright (C) 2006-2024 wolfSSL Inc.
  *
@@ -19,12 +19,9 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
 
-#ifndef _MAIN_
+#ifndef _MAIN_H_
-#define _MAIN_
+#define _MAIN_H_
 
 void app_main(void);
 
-/* see wolfssl/wolfcrypt/benchmark/benchmark.h */
-extern void wolf_benchmark_task();
-
 #endif

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/main.c

@@ -27,20 +27,27 @@
 /* The wolfSSL user_settings.h file is automatically included by the settings.h
  * file and should never be explicitly included in any other source files.
  * The settings.h should also be listed above wolfssl library include files. */
-#include <wolfssl/wolfcrypt/settings.h>
+#if defined(WOLFSSL_USER_SETTINGS)
-#include <wolfssl/version.h>
+    #include <wolfssl/wolfcrypt/settings.h>
-#include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+    #if defined(WOLFSSL_ESPIDF)
-#include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+        #include <wolfssl/version.h>
-#ifndef WOLFSSL_ESPIDF
+        #include <wolfssl/wolfcrypt/types.h>
-    #error "Problem with wolfSSL user_settings. "           \
+        #include <wolfcrypt/benchmark/benchmark.h>
-           "Check components/wolfssl/include "              \
+        #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
-           "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+        #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
-           "typically in the component CMakeLists.txt"
+    #else
+        #error "Problem with wolfSSL user_settings. "           \
+               "Check components/wolfssl/include "              \
+               "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+               "typically in the component CMakeLists.txt"
+    #endif
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
 #endif
 
-#include <wolfssl/wolfcrypt/types.h>
-#include <wolfcrypt/benchmark/benchmark.h>
-
 /* Hardware; include after other libraries,
  * particularly after freeRTOS from settings.h */
 #include <driver/uart.h>
@@ -152,6 +159,7 @@ char* __argv[WOLFSSL_BENCH_ARGV_MAX_ARGUMENTS];
 
 int construct_argv()
 {
+    #define ARG_BUFF_SIZE 16
     int cnt = 0;
     int i = 0;
     int len = 0;
@@ -212,15 +220,16 @@ int construct_argv()
 /* entry point */
 void app_main(void)
 {
-    int stack_start = 0;
-
     uart_config_t uart_config = {
         .baud_rate = THIS_MONITOR_UART_BAUD_DATE,
         .data_bits = UART_DATA_8_BITS,
         .parity    = UART_PARITY_DISABLE,
         .stop_bits = UART_STOP_BITS_1,
     };
+    int stack_start = 0;
+    word32 loops = 0;
     esp_err_t ret = 0;
+
     stack_start = esp_sdk_stack_pointer();
 
     /* uart_set_pin(UART_NUM_0, TX_PIN, RX_PIN,
@@ -270,7 +279,7 @@ void app_main(void)
     ESP_LOGI(TAG, "NO_CRYPT_BENCHMARK defined, skipping wolf_benchmark_task")
 #else
 
-    /* although wolfCrypt_Init() may be explicitly called above,
+    /* Although wolfCrypt_Init() may be explicitly called above,
     ** note it is still always called in wolf_benchmark_task.
     */
     stack_start = uxTaskGetStackHighWaterMark(NULL);
@@ -278,36 +287,41 @@ void app_main(void)
     do {
         ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
 
-        wolf_benchmark_task(); /* TODO capture return value! */
+#ifdef WOLFSSL_BENCH_ARGV
+        ret = benchmark_test(__argv);
+#else
+        ret = benchmark_test(NULL);
+#endif
         ESP_LOGI(TAG, "Stack used: %d\n",
                       stack_start - uxTaskGetStackHighWaterMark(NULL));
 
-        #if defined(WOLFSSL_HW_METRICS) && defined(WOLFSSL_HAS_METRICS)
+        esp_hw_show_metrics();
-            esp_hw_show_metrics();
+
-        #endif
+        loops++; /* count of the number of tests run before fail. */
-    } while (BENCHMARK_LOOP);
+        ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
-    /* Reminder: wolfCrypt_Cleanup should always be called at completion,
+        ESP_LOGI(TAG, "loops = %d", loops);
+
+    } while (BENCHMARK_LOOP && (ret == 0));
+
+    /* Reminder: wolfCrypt_Cleanup() should always be called at completion,
     ** and is called in wolf_benchmark_task().  */
 
+#if defined BENCHMARK_LOOP && (BENCHMARK_LOOP == 1)
+    /* If BENCHMARK_LOOP enabled and we get here, there was likely an error. */
+    ESP_LOGI(TAG, "Benchmark loops completed: %d", loops);
+#endif
+
 #if defined(SINGLE_THREADED)
     /* need stack monitor for single thread */
 #else
     ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
 #endif
 
-    /* note wolfCrypt_Cleanup() should always be called when finished.
-    ** This is called at the end of wolf_test_task();
-    */
-
-#if defined(DEBUG_WOLFSSL) && defined(WOLFSSL_ESP32_CRYPT_RSA_PRI)
-    esp_hw_show_mp_metrics();
-#endif
-
 #ifdef INCLUDE_uxTaskGetStackHighWaterMark
-        ESP_LOGI(TAG, "Stack HWM: %d", uxTaskGetStackHighWaterMark(NULL));
+    ESP_LOGI(TAG, "Stack HWM: %d", uxTaskGetStackHighWaterMark(NULL));
 
-        ESP_LOGI(TAG, "Stack used: %d", CONFIG_ESP_MAIN_TASK_STACK_SIZE
+    ESP_LOGI(TAG, "Stack used: %d", CONFIG_ESP_MAIN_TASK_STACK_SIZE
-                                        - (uxTaskGetStackHighWaterMark(NULL)));
+                                    - (uxTaskGetStackHighWaterMark(NULL)));
 #endif
 
 #ifdef WOLFSSL_ESPIDF_VERBOSE_EXIT_MESSAGE
@@ -318,19 +332,19 @@ void app_main(void)
         ESP_LOGE(TAG, WOLFSSL_ESPIDF_VERBOSE_EXIT_MESSAGE("Failed!", ret));
     }
 #elif defined(WOLFSSL_ESPIDF_EXIT_MESSAGE)
-     ESP_LOGI(TAG, WOLFSSL_ESPIDF_EXIT_MESSAGE);
+    ESP_LOGI(TAG, WOLFSSL_ESPIDF_EXIT_MESSAGE);
 #else
     ESP_LOGI(TAG, "\n\nDone!\n\n"
                   "If running from idf.py monitor, press twice: Ctrl+]");
 #endif
 
-    /* after the test, we'll just wait */
+    /* After completion, we'll just wait */
     while (1) {
-        /* do something other than nothing to help next program/debug session*/
+#if defined(SINGLE_THREADED)
-#ifndef SINGLE_THREADED
+        while (1);
-        vTaskDelay(1000);
+#else
+        vTaskDelay(60000);
 #endif
-    }
+    } /* done while */
-
 #endif /* NO_CRYPT_BENCHMARK */
-} /* main */
+}

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/partitions_singleapp_large.csv

@@ -1,31 +1,31 @@
-# to view: idf.py partition-table
+# to view: idf.py partition-table
-#
+#
-# ESP-IDF Partition Table
+# ESP-IDF Partition Table
-# Name, Type,  SubType, Offset,  Size, Flags
+# Name, Type,  SubType, Offset,  Size, Flags
-nvs,     data, nvs,     0x9000,  24K,
+nvs,     data, nvs,     0x9000,  24K,
-phy_init,data, phy,     0xf000,  4K,
+phy_init,data, phy,     0xf000,  4K,
-factory, app,  factory, 0x10000, 1500K,
+factory, app,  factory, 0x10000, 1500K,
-
+
-
+
-# For other settings, see:
+# For other settings, see:
-# https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/partition-tables.html#creating-custom-tables
+# https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/partition-tables.html#creating-custom-tables
-#
+#
-# Here is the summary printed for the "Single factory app, no OTA" configuration:
+# Here is the summary printed for the "Single factory app, no OTA" configuration:
-#
+#
-# # ESP-IDF Partition Table
+# # ESP-IDF Partition Table
-# # Name,   Type, SubType, Offset,  Size, Flags
+# # Name,   Type, SubType, Offset,  Size, Flags
-# nvs,      data, nvs,     0x9000,  0x6000,
+# nvs,      data, nvs,     0x9000,  0x6000,
-# phy_init, data, phy,     0xf000,  0x1000,
+# phy_init, data, phy,     0xf000,  0x1000,
-# factory,  app,  factory, 0x10000, 1M,
+# factory,  app,  factory, 0x10000, 1M,
-#
+#
-#
+#
-# Here is the summary printed for the "Factory app, two OTA definitions" configuration:
+# Here is the summary printed for the "Factory app, two OTA definitions" configuration:
-#
+#
-# # ESP-IDF Partition Table
+# # ESP-IDF Partition Table
-# # Name,   Type, SubType, Offset,  Size, Flags
+# # Name,   Type, SubType, Offset,  Size, Flags
-# nvs,      data, nvs,     0x9000,  0x4000,
+# nvs,      data, nvs,     0x9000,  0x4000,
-# otadata,  data, ota,     0xd000,  0x2000,
+# otadata,  data, ota,     0xd000,  0x2000,
-# phy_init, data, phy,     0xf000,  0x1000,
+# phy_init, data, phy,     0xf000,  0x1000,
-# factory,  app,  factory, 0x10000,  1M,
+# factory,  app,  factory, 0x10000,  1M,
-# ota_0,    app,  ota_0,   0x110000, 1M,
+# ota_0,    app,  ota_0,   0x110000, 1M,
-# ota_1,    app,  ota_1,   0x210000, 1M,
+# ota_1,    app,  ota_1,   0x210000, 1M,

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/sdkconfig.defaults

@@ -1,18 +1,31 @@
+# Set the known example app config to template example (see user_settings.h)
+CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSL_BENCHMARK=y
+
+# Some wolfSSL helpers
+CONFIG_USE_WOLFSSL_ESP_SDK_TIME=y
+
+# sdkconfig.defaults for ESP8266 + ESP32
 # Note that during the build process, settings from sdkconfig.defaults will not override those already in sdkconfig.
 # See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html#custom-sdkconfig-defaults
 CONFIG_BENCH_ARGV="-lng 0"
+# FreeRTOS ticks at 1ms interval
+CONFIG_FREERTOS_UNICORE=y
 CONFIG_FREERTOS_HZ=1000
 CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
 
 #
 # Default main stack size. See user_settings.h
 #
+# This is typically bigger than needed for stack size.
+# Units are words, not bytes. See user_settings.h
+#
 # For wolfSSL SMALL_STACK, 3072 bytes should be sufficient for benchmark app.
 # When using RSA, assign at least 10500 bytes, otherwise 5500 usually works for others
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=10500
+# We set this to 28672 for use in the "test everything possible" in the wolfssl_test app.
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=28672
 
 # Legacy stack size for older ESP-IDF versions
-CONFIG_MAIN_TASK_STACK_SIZE=10500
+CONFIG_MAIN_TASK_STACK_SIZE=28672
 
 #
 # Benchmark must not have CONFIG_NEWLIB_NANO_FORMAT enabled
@@ -30,6 +43,10 @@ CONFIG_ESP_TASK_WDT_EN=n
 CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
 CONFIG_ESP_INT_WDT=n
 
+# ESP8266 Watchdog:
+CONFIG_TASK_WDT=n
+CONFIG_TASK_WDT_PANIC=n
+
 # ESP8266 WDT
 # CONFIG_ESP_PANIC_PRINT_REBOOT is not set
 CONFIG_ESP_PANIC_PRINT_REBOOT=n
@@ -45,6 +62,36 @@ CONFIG_HEAP_DISABLE_IRAM=y
 # Performance
 # CONFIG_COMPILER_OPTIMIZATION_PERF=y
 
+# Set max CPU frequency (falls back as needed for lower maximum)
+CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
+
+# Enable wolfSSL TLS in esp-tls
+CONFIG_ESP_TLS_USING_WOLFSSL=y
+CONFIG_TLS_STACK_WOLFSSL=y
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=y
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=n
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+# Some wolfSSL helpers
+CONFIG_USE_WOLFSSL_ESP_SDK_TIME=n
+
+# CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS is not set
+CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# Performance
+# CONFIG_COMPILER_OPTIMIZATION_PERF=y
+
 # Set max COU frequency (falls back as needed for lower maximum)
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
 

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/sdkconfig.defaults.esp8266

@@ -0,0 +1,30 @@
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y
+
+# Enable wolfSSL TLS in esp-tls (not yet supported in RTOS SDK 3.4
+CONFIG_ESP_TLS_USING_WOLFSSL=n
+CONFIG_TLS_STACK_WOLFSSL=n
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# ESP8266 Watchdog:
+CONFIG_TASK_WDT=n
+CONFIG_TASK_WDT_PANIC=n
+
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y

IDE/Espressif/ESP-IDF/examples/wolfssl_client/CMakeLists.txt

@@ -3,6 +3,8 @@
 #
 # The following lines of boilerplate have to be in your project's
 # CMakeLists in this exact order for cmake to work correctly
+message(STATUS "Begin project ${CMAKE_PROJECT_NAME}")
+
 cmake_minimum_required(VERSION 3.16)
 
 # The wolfSSL CMake file should be able to find the source code.
@@ -48,7 +50,8 @@ endif()
 # End optional WOLFSSL_CMAKE_SYSTEM_NAME
 
 # This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
-set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+# set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+string(REPLACE "\\" "/" PROTOCOL_EXAMPLES_DIR "$ENV{IDF_PATH}/examples/common_components/protocol_examples_common")
 
 if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
     message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
@@ -80,17 +83,20 @@ else()
 endif()
 
 
-# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+message(STATUS "begin include")
-set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+if(0)
+    # This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+    set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
 
-if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
+    if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
-    message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+        message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
-    set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+        set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DFOUND_PROTOCOL_EXAMPLES_DIR")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DFOUND_PROTOCOL_EXAMPLES_DIR")
-else()
+    else()
-    message("NOT FOUND: PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+        message("NOT FOUND: PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+    endif()
 endif()
-
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-
+message(STATUS "end include")
 project(wolfssl_client)
+message(STATUS "end project")

IDE/Espressif/ESP-IDF/examples/wolfssl_client/README.md

@@ -10,9 +10,7 @@ For general information on [wolfSSL examples for Espressif](../README.md), see t
 
 ## Quick Start
 
-Use the [ESP-IDF](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html)
+Use the `ESP-IDF` for ESP32 or `RTOS SDK` for the ESP8266.
-for ESP32 or [RTOS SDK](https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/get-started/index.html)
-for the ESP8266.
 
 Run `menuconfig` utility (`idf.py menuconfig` for ESP32 or `make menuconfig` for the ESP8266)
 and set the various parameters for the target device, along with local WiFi settings:
@@ -49,7 +47,7 @@ Difficulty flashing:
 * Check that quality USB cables are being used.
 * Try lowering the flash baud rate in the `menuconfig`. The 115200 is typically reliable.
 * Review board specifications: some require manual boot mode via on-board buttons.
-* See [Espressif ESP Frequently Asked Questions](https://docs.espressif.com/projects/esp-faq/en/latest/esp-faq-en-master.pdf)
+* See Espressif ESP Frequently Asked Questions `esp-faq-en-master.pdf`.
 
 ## ESP-IDF Commandline v5.x
 

IDE/Espressif/ESP-IDF/examples/wolfssl_client/README_server_sm.md

@@ -167,7 +167,7 @@ I (735) system_api: read default base MAC address from EFUSE
 I (755) wifi:wifi firmware version: 0d470ef
 I (755) wifi:wifi certification version: v7.0
 I (755) wifi:config NVS flash: enabled
-I (755) wifi:config nano formating: disabled
+I (755) wifi:config nano formatting: disabled
 I (755) wifi:Init data frame dynamic rx buffer num: 32
 I (765) wifi:Init management frame dynamic rx buffer num: 32
 I (765) wifi:Init management short buffer num: 32

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/CMakeLists.txt

@@ -19,16 +19,145 @@
 #
 # cmake for wolfssl Espressif projects
 #
-# Version 5.6.0.011 for detect test/benchmark
+# Version 5.7.2 Espressif ESP-IDF integration
 #
 # See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html
 #
-
+message(STATUS "Begin wolfssl ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
 cmake_minimum_required(VERSION 3.16)
+
+set(VERBOSE_COMPONENT_MESSAGES 1)
+
+# Optional requires include:
+# set(THIS_ESP_TLS "esp-tls")
+set(THIS_ESP_TLS "")
+
+# function: IS_ESP_IDF_COMPONENT
+#  output:    RESULT = 1 (true) if this component is located in the ESP-IDF components
+#             otherwise 0 (false)
+function( IS_ESP_IDF_COMPONENT  RESULT )
+    # NOTE: Component location is based on the location of the CMakeList.txt
+    # and *not* the location of the wolfSSL source code. (which may be anywhere)
+
+    # Normalize the paths to remove any trailing slashes
+    get_filename_component(NORMALIZED_IDF_PATH  "${IDF_PATH}"      REALPATH)
+    get_filename_component(NORMALIZED_TEST_PATH "${COMPONENT_DIR}" REALPATH)
+
+    # Check if the test path starts with the IDF_PATH
+    string(FIND "${NORMALIZED_TEST_PATH}" "${NORMALIZED_IDF_PATH}" pos)
+
+    if(${pos} EQUAL 0)
+        message(STATUS "${COMPONENT_DIR} is within IDF_PATH.")
+        set(${RESULT} 1 PARENT_SCOPE)
+    else()
+        message(STATUS "${COMPONENT_DIR} is not within IDF_PATH.")
+        set(${RESULT} 0 PARENT_SCOPE)
+    endif()
+endfunction()
+
+# Determine if this cmake file is located in the ESP-IDF component directory or not,
+# and if so, if it is being ignored (allowing the use of a local project one, instead).
+IS_ESP_IDF_COMPONENT( IS_WOLSSL_ESP_IDF_COMPONENT )
+if( IS_WOLSSL_ESP_IDF_COMPONENT )
+    message(STATUS "This wolfSSL is a component in ESP-IDF.")
+    if ( CONFIG_IGNORE_ESP_IDF_WOLFSSL_COMPONENT )
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component in ESP-IDF is being ignored.")
+        return()
+    endif()
+endif()
+
+
+if( "${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}" STREQUAL "" )
+    # nothing to do
+else()
+    # Only forward slashes, or double backslashes are supported.
+    # By the time we get here the sdkconfig file has a value for wolfSSL source code root.
+    string(REPLACE "\\" "/" CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
+    message(STATUS "Cleaned wolfssl path: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+endif()
+
+# The scope of this CMAKE_C_FLAGS is just this component:
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DWOLFSSL_USER_SETTINGS")
+
 set(CMAKE_CURRENT_SOURCE_DIR ".")
-set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
+# set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
-set(WOLFSSL_ROOT "$ENV{WOLFSSL_ROOT}" )
+
+# Optionally set your source to wolfSSL in your project CMakeLists.txt like this:
+# set(WOLFSSL_ROOT "c:/test/my_wolfssl" )
+
+if ( "${WOLFSSL_ROOT}" STREQUAL "")
+    set(WOLFSSL_ROOT "$ENV{WOLFSSL_ROOT}" )
+endif()
+
+if(  "$ENV{IDF_PATH}" STREQUAL "" )
+    message(FATAL_ERROR "IDF_PATH Environment variable not set!")
+else()
+    string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
+endif()
+
+# Optional compiler definitions to help with system name detection (typically printed by app diagnostics)
+if(VERBOSE_COMPONENT_MESSAGES)
+    if(WIN32)
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WINDOWS")
+        message("Detected Windows")
+    endif()
+    if(CMAKE_HOST_UNIX)
+        message("Detected UNIX")
+    endif()
+    if(APPLE)
+        message("Detected APPLE")
+    endif()
+    if(CMAKE_HOST_UNIX AND (NOT APPLE) AND EXISTS "/proc/sys/fs/binfmt_misc/WSLInterop")
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WSL")
+        message("Detected WSL")
+    endif()
+    if(CMAKE_HOST_UNIX AND (NOT APPLE) AND (NOT WIN32))
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_LINUX")
+        message("Detected Linux")
+    endif()
+    if(APPLE)
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_APPLE")
+        message("Detected Apple")
+    endif()
+endif() # End optional WOLFSSL_CMAKE_SYSTEM_NAME
+
+message(STATUS "CONFIG_TARGET_PLATFORM = ${CONFIG_TARGET_PLATFORM}")
+
+# Check that there are not conflicting wolfSSL components
+# The ESP Registry Component will be in ./managed_components/wolfssl__wolfssl
+# The local component wolfSSL directory will be in ./components/wolfssl
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" AND EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl" )
+    # These exclude statements don't seem to be honored by the $ENV{IDF_PATH}/tools/cmake/project.cmake'
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" EXCLUDE_FROM_ALL)
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl/include" EXCLUDE_FROM_ALL)
+    # So we'll error out and let the user decide how to proceed:
+    message(WARNING "\nFound wolfSSL components in\n"
+                    "./managed_components/wolfssl__wolfssl\n"
+                    "and\n"
+                    "./components/wolfssl\n"
+                    "in project directory: \n"
+                    "${CMAKE_HOME_DIRECTORY}")
+    message(FATAL_ERROR "\nPlease use either the ESP Registry Managed Component or the wolfSSL component directory but not both.\n"
+                        "If removing the ./managed_components/wolfssl__wolfssl directory, remember to also remove "
+                        "or rename the idf_component.yml file typically found in ./main/")
+else()
+    message(STATUS "No conflicting wolfSSL components found.")
+endif()
+
+
+# Don't include lwip requirement for benchmark and test apps.
+if( ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark") OR ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_test") )
+    message(STATUS "Not including lwip for ${CMAKE_PROJECT_NAME}")
+else()
+    # benchmark and test do not need wifi, everything else probably does:
+    set(COMPONENT_REQUIRES lwip "${THIS_ESP_TLS}") # we typically don't need lwip directly in wolfssl component
+endif()
 
 # find the user name to search for possible "wolfssl-username"
 message(STATUS "USERNAME = $ENV{USERNAME}")
@@ -51,6 +180,25 @@ else()
     string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
 endif()
 
+# ENVIRONMENT_VAR_TO_MACRO
+# Check environment variable name EVARPARAM as [name]
+# If defined, and has a value of EVARVALUE as [value],
+# then assign a compiler definition "-D[name]=[value]"
+function(ENVIRONMENT_VAR_TO_MACRO EVARPARAM EVARVALUE)
+    # If the EVARPARAM environment variable name is set to EVARVALUE,
+    # set the compiler flag definition to enable CSV output.
+    if ( "$ENV{${EVARPARAM}}" STREQUAL "${EVARVALUE}")
+        message(STATUS "Appending compile definition: -D${EVARPARAM}=${EVARVALUE}")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D${EVARPARAM}=${EVARVALUE}")
+    else()
+        if(DEFINED ENV{${EVARPARAM}})
+            message(STATUS "Environment variable ${EVARPARAM} detected but set to $ENV{${EVARPARAM}}, not appending compile definition.")
+        else()
+            message(STATUS "Environment variable ${EVARPARAM} not detected, not appending compile definition.")
+        endif()
+    endif()
+endfunction()
+
 # COMPONENT_NAME = wolfssl
 # The component name is the directory name. "No feature to change this".
 # See https://github.com/espressif/esp-idf/issues/8978#issuecomment-1129892685
@@ -68,7 +216,8 @@ endif()
 # function: IS_WOLFSSL_SOURCE
 #  parameter: DIRECTORY_PARAMETER - the directory to test
 #  output:    RESULT = contains contents of DIRECTORY_PARAMETER for wolfssl directory, otherwise blank.
-function(IS_WOLFSSL_SOURCE DIRECTORY_PARAMETER RESULT)
+function( IS_WOLFSSL_SOURCE  DIRECTORY_PARAMETER
+          RESULT )
     if (EXISTS "${DIRECTORY_PARAMETER}/wolfcrypt/src")
         set(${RESULT} "${DIRECTORY_PARAMETER}" PARENT_SCOPE)
     else()
@@ -76,27 +225,71 @@ function(IS_WOLFSSL_SOURCE DIRECTORY_PARAMETER RESULT)
     endif()
 endfunction()
 
+# *********************************************************************************************
 # function: FIND_WOLFSSL_DIRECTORY
 #  parameter: OUTPUT_FOUND_WOLFSSL_DIRECTORY contains root of source code, otherwise blank
 #
+# Example usage:
+#   FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+# *********************************************************************************************
 function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
-    message(STATUS "Starting FIND_WOLFSSL_DIRECTORY")
+    message(STATUS "Starting FIND_WOLFSSL_DIRECTORY: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
-    set(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}")
+
-    if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+    if ( "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}" STREQUAL "" )
-        message(STATUS "The WOLFSSL_ROOT environment variable is not set. Searching...")
+        # The parameter is empty, so we certainly need to search.
+        # First, see if there's an environment variable. This takes highest priority (unless already found as hard-coded, above)
+        set(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}")
+        if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+            message(STATUS "The WOLFSSL_ROOT environment variable is not set. Searching...")
+            # Next, if not found, see if wolfSSL was selected for ESP-TLS Kconfig
+            if(CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT)
+                set(CURRENT_SEARCH_DIR ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
+                get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
+                message(STATUS "WOLFSSL_ROOT found in sdkconfig/KConfig: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+            else()
+                message(STATUS "wolfSSL not defined in [Component Config] [wolfssl]. Continuing search...")
+                # If not specified as a search hint in OUTPUT_FOUND_WOLFSSL_DIRECTORY:
+                # This wolfSSL component CMakeLists.txt may be found EITHER in:
+                #   1) local project component
+                #   2) ESP-IDF share components
+                # We'll start in the CMAKE_CURRENT_SOURCE_DIR, typically [something]/projectname/components/wolfssl
+                # That option might find wolfSSL source code as a copy in the component directory (e.g. Managed Components)
+                # Unless cmake is in the ESP-IDF, in which case it is unlikely to find wolfSSL source in any parent.
+                message(STATUS "CMAKE_CURRENT_SOURCE_DIR = ${CMAKE_CURRENT_SOURCE_DIR}")
+                get_filename_component(CURRENT_SEARCH_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ABSOLUTE)
+                message(STATUS "CURRENT_SEARCH_DIR = ${CURRENT_SEARCH_DIR}")
+                string(LENGTH ${CURRENT_SEARCH_DIR} CURRENT_SEARCH_DIR_LENGTH)
+            endif() # CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT
+        endif() # check environment var blank
     else()
-        get_filename_component(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}" ABSOLUTE)
+        message(STATUS "Parameter found for FIND_WOLFSSL_DIRECTORY")
+        message(STATUS "Setting wolfSSL search directory to: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+        set(CURRENT_SEARCH_DIR "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+    endif() # parameter empty
+
+    # Check to see if we found a path in environment or config settings, above.
+    if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+        message(STATUS "Source for wolfSSL not specified in path nor config settings.")
+        # We'll continue the search by recursing up the directory tree, below.
+    else()
+        # Setting found! Does it contain a valid path?
+        string(REPLACE "\\" "/" CURRENT_SEARCH_DIR ${CURRENT_SEARCH_DIR})
+        get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
         IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR}" FOUND_WOLFSSL)
         if( FOUND_WOLFSSL )
-            message(STATUS "Found WOLFSSL_ROOT via Environment Variable: ${CURRENT_SEARCH_DIR}")
+            message(STATUS "Found wolfSSL source code via setting: ${CURRENT_SEARCH_DIR}")
             set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
             return()
         else()
-            message(FATAL_ERROR "WOLFSSL_ROOT Environment Variable defined, but path not found:")
+            if(WIN32)
-            message(STATUS "$ENV{WOLFSSL_ROOT}")
+                message(STATUS "When specifying a path for Windows, use forward slahes, or double backslashes.")
+            endif()
+            message(STATUS "CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT sdkconfig setting = ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+            message(STATUS "WOLFSSL_ROOT Variable defined, but source code not found: ${CURRENT_SEARCH_DIR}")
         endif()
     endif()
 
+
     # we'll start in the CMAKE_CURRENT_SOURCE_DIR, typically [something]/projectname/components/wolfssl
     message(STATUS "CMAKE_CURRENT_SOURCE_DIR = ${CMAKE_CURRENT_SOURCE_DIR}")
     get_filename_component(CURRENT_SEARCH_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ABSOLUTE)
@@ -114,16 +307,47 @@ function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
             return()
         endif()
 
+        # Maintain CURRENT_SEARCH_DIR, but check various suffixes with CURRENT_SEARCH_DIR_ALT
         if( THIS_USER )
             # Check for "wolfssl-[username]" subdirectory as we recurse up the directory tree
             set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl-${THIS_USER})
-            message(STATUS "Looking in ${CURRENT_SEARCH_DIR}")
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
 
-            #if(EXISTS ${CURRENT_SEARCH_DIR_ALT} AND IS_DIRECTORY ${CURRENT_SEARCH_DIR_ALT} AND EXISTS "${CURRENT_SEARCH_DIR_ALT}/wolfcrypt/src")
             IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
             if ( FOUND_WOLFSSL )
-               message(STATUS "Found wolfssl in user-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                message(STATUS "Found wolfssl in user-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
-                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR_ALT} PARENT_SCOPE)
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
+                return()
+            endif()
+        endif()
+
+        if ( FOUND_WOLFSSL )
+            # if we already found the source, skip attempt of "wolfssl-master"
+        else()
+            set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl-master)
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
+
+            IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
+            if ( FOUND_WOLFSSL )
+                message(STATUS "Found wolfssl in master-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
+                return()
+            endif()
+        endif()
+
+        if ( FOUND_WOLFSSL )
+            # if we already found the source, skip attempt of "wolfssl"
+        else()
+            set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl)
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
+
+            IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
+            if ( FOUND_WOLFSSL )
+                message(STATUS "Found wolfssl in CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
                 return()
             endif()
         endif()
@@ -143,7 +367,8 @@ function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
         get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" DIRECTORY)
         message(STATUS "Next CURRENT_SEARCH_DIR = ${CURRENT_SEARCH_DIR}")
         if( "${PRIOR_SEARCH_DIR}" STREQUAL "${CURRENT_SEARCH_DIR}" )
-            # when the search directory is empty, we'll give up
+            # When the parent is current directory, cannot go any further. We didn't find wolfssl.
+            # When the search directory is empty, we'll give up.
             set(CURRENT_SEARCH_DIR "")
         endif()
     endwhile()
@@ -154,17 +379,58 @@ endfunction()
 
 
 # Example usage:
+#
+# Simply find the WOLFSSL_DIRECTORY by searching parent directories:
+#   FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+#
 
+message(STATUS "CONFIG_TARGET_PLATFORM = ${CONFIG_TARGET_PLATFORM}")
 
+# Check for environment variable that may be assigned to macros
+ENVIRONMENT_VAR_TO_MACRO("GENERATE_MACHINE_PARSEABLE_REPORT" "1")
+ENVIRONMENT_VAR_TO_MACRO("WOLFSSL_BENCHMARK_FIXED_CSV"       "1")
 
+# Optional variable inspection
+if (0)
+    get_cmake_property(_variableNames VARIABLES)
+    list (SORT _variableNames)
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES BEGIN")
+    message(STATUS "")
+    foreach (_variableName ${_variableNames})
+        message(STATUS "${_variableName}=${${_variableName}}")
+    endforeach()
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES END")
+    message(STATUS "")
+endif()
+
+if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+    # There's no esp_timer, no driver components for the ESP8266
+    message(STATUS "Early expansion EXCLUDES esp_timer for esp8266: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion EXCLUDES driver for esp8266: ${THIS_INCLUDE_DRIVER}")
+    set(THIS_INCLUDE_TIMER "")
+    set(THIS_INCLUDE_DRIVER "")
+    set(THIS_ESP_TLS "")
+else()
+    message(STATUS "Early expansion includes esp_timer: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion includes driver: ${THIS_INCLUDE_DRIVER}")
+    set(THIS_INCLUDE_TIMER "esp_timer")
+    set(THIS_INCLUDE_DRIVER "driver")
+    set(THIS_ESP_TLS "esp-tls")
+    # Let the app know that we've included the esp-tls component requirement.
+    # This is critical for use the the esp-tls component. See wolfssl esp_crt_bundle.c file.
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_REQUIRED_ESP_TLS=1")
+endif()
 
 if(CMAKE_BUILD_EARLY_EXPANSION)
     message(STATUS "wolfssl component CMAKE_BUILD_EARLY_EXPANSION:")
     idf_component_register(
                             REQUIRES "${COMPONENT_REQUIRES}"
                             PRIV_REQUIRES # esp_hw_support
-                                          # esp_timer
+                                          "${THIS_ESP_TLS}"
-                                          # driver # this will typically only be needed for wolfSSL benchmark
+                                          "${THIS_INCLUDE_TIMER}"
+                                          "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
                            )
 
 else()
@@ -173,48 +439,99 @@ else()
     message(STATUS "wolfssl component config:")
     message(STATUS "************************************************************************************************")
 
+    if ( "${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+        # There's no esp_timer, no driver components for the ESP8266
+        set(THIS_INCLUDE_TIMER "")
+        set(THIS_INCLUDE_DRIVER "")
+    else()
+        set(THIS_INCLUDE_TIMER "esp_timer")
+        set(THIS_INCLUDE_DRIVER "driver")
+    endif()
+
     # search for wolfSSL
     FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
     if(WOLFSSL_ROOT)
-        message(STATUS "NEW Found wolfssl directory at: ${WOLFSSL_ROOT}")
+        IS_WOLFSSL_SOURCE("${WOLFSSL_ROOT}" FOUND_WOLFSSL)
+        if(FOUND_WOLFSSL)
+            message(STATUS "Found WOLFSSL_ROOT via CMake specification.")
+        else()
+            # WOLFSSL_ROOT Path specified in CMakeLists.txt is not a valid path
+            message(FATAL_ERROR "WOLFSSL_ROOT CMake Variable defined, but path not found: ${WOLFSSL_ROOT}\n"
+                                "Try correcting WOLFSSL_ROOT in your project CMakeFile.txt or setting environment variable.")
+            # Abort CMake after fatal error.
+        endif()
     else()
-        message(STATUS "NEW wolfssl directory not found.")
+        message(STATUS "Source code for wolfSSL still not found.")
+        message(STATUS "Searching from project home: ${CMAKE_HOME_DIRECTORY} ...")
+        set(WOLFSSL_ROOT "${CMAKE_HOME_DIRECTORY}")
+        FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+    endif()
+
+
+    if(WOLFSSL_ROOT)
+        message(STATUS "Confirmed wolfssl directory at: ${WOLFSSL_ROOT}")
+    else()
+        # Try to allow a more intuitive error that the source code was not found in cmake:
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_WARNING_SOURCE_NOT_FOUND")
+
+        message(STATUS "Failed: wolfssl source code directory not found.")
         # Abort. We need wolfssl _somewhere_.
-        message(FATAL_ERROR "Could not find wolfssl in ${WOLFSSL_ROOT}.\n"
+        message(STATUS "")
-                            "Try setting WOLFSSL_ROOT environment variable or git clone.")
+        message(STATUS "")
+        message(STATUS "Could not find wolfssl in any parent directory named wolfssl-${THIS_USER}, wolfssl-master, or wolfssl.\n"
+                       "Try setting WOLFSSL_ROOT environment variable, cmake variable in project, copy source, or use managed components.")
+        message(STATUS "")
+        message(STATUS "")
+        # Abort CMake after fatal error. (or not?)
     endif()
 
     set(INCLUDE_PATH ${WOLFSSL_ROOT})
 
     set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/src/")
 
-    if( ${CMAKE_PROJECT_NAME} STREQUAL "wolfssl_benchmark" )
+    # During regression tests, optionally copy source locally and use: set(USE_LOCAL_TEST_BENCH 1)
-        set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+    set(USE_LOCAL_TEST_BENCH 0)
-    endif()
+    if(NOT USE_LOCAL_TEST_BENCH)
-
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "hello-world" )
-    if( ${CMAKE_PROJECT_NAME} STREQUAL "wolfssl_test" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/benchmark")
-        set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/test")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+        endif()
+
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+        endif()
+
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_test" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/test")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/test")
+        endif()
     endif()
 
+    message(STATUS "WOLFSSL_EXTRA_PROJECT_DIR = ${WOLFSSL_EXTRA_PROJECT_DIR}")
     set(COMPONENT_SRCDIRS "\"${WOLFSSL_ROOT}/src/\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif\""
+                          "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/atmel\""
                           "\"${WOLFSSL_EXTRA_PROJECT_DIR}\""
                          ) # COMPONENT_SRCDIRS
 
     message(STATUS "This COMPONENT_SRCDIRS = ${COMPONENT_SRCDIRS}")
 
+    # wolfSSL user_settings.h may be in the local project.
+    # TODO check if exists and possibly set to ESP-IDF
     set(WOLFSSL_PROJECT_DIR "${CMAKE_HOME_DIRECTORY}/components/wolfssl")
-    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${WOLFSSL_PROJECT_DIR}/include/user_settings.h")
-
 
+    string(REPLACE "/" "//" STR_WOLFSSL_PROJECT_DIR "${WOLFSSL_PROJECT_DIR}")
+    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${STR_WOLFSSL_PROJECT_DIR}/include/user_settings.h")
+    message(STATUS "Added definition for user_settings.h: -DWOLFSSL_USER_SETTINGS_DIR=\"${STR_WOLFSSL_PROJECT_DIR}//include//user_settings.h\"")
     # Espressif may take several passes through this makefile. Check to see if we found IDF
     string(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "" WOLFSSL_FOUND_IDF)
 
     # get a list of all wolfcrypt assembly files; we'll exclude them as they don't target Xtensa
     file(GLOB EXCLUDE_ASM *.S)
-    file(GLOB_RECURSE EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
+    file(GLOB EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
 
     message(STATUS "IDF_PATH = $ENV{IDF_PATH}")
     message(STATUS "PROJECT_SOURCE_DIR = ${PROJECT_SOURCE_DIR}")
@@ -237,11 +554,12 @@ else()
         message(STATUS "Remove either the local project component: ${WOLFSSL_PROJECT_DIR} ")
         message(STATUS "or the Espressif shared component installed at: $ENV{IDF_PATH}/components/wolfssl/ ")
         message(STATUS "")
-        message(FATAL_ERROR "Please use wolfSSL in either local project or Espressif components, but not both.")
         message(STATUS "")
         message(STATUS "**************************************************************************************")
         message(STATUS "")
 
+        message(STATUS "Please use wolfSSL in either local project or Espressif components, but not both.")
+
         # Optional: if you change the above FATAL_ERROR to STATUS you can warn at runtime with this macro definition:
         set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
 
@@ -291,6 +609,7 @@ else()
                         message(FATAL_ERROR "Found stray wolfSSL user_settings.h in "
                                             "${WOLFSSL_ROOT}/include/user_settings.h "
                                             " (please move it to ${WOLFSSL_PROJECT_DIR}/include/user_settings.h )")
+                        # Abort CMake after fatal error.
                     else()
                         # we won't overwrite an existing user settings file, just note that we already have one:
                         if( EXISTS "${WOLFSSL_PROJECT_DIR}/include/user_settings.h" )
@@ -347,7 +666,9 @@ else()
     # depending on the environment, we may need to swap backslashes with forward slashes
     string(REPLACE "\\" "/" RTOS_IDF_PATH "$ENV{IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
 
-    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	if(WOLFSSL_ROOT)
+	    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	endif()
 
     if(IS_DIRECTORY "${RTOS_IDF_PATH}")
         message(STATUS "Found current RTOS path: ${RTOS_IDF_PATH}")
@@ -360,21 +681,22 @@ else()
             message(STATUS "Could not find RTOS path")
         endif()
     endif()
-
+    message(STATUS "THIS_IDF_PATH = $THIS_IDF_PATH")
-
+    # wolfSSL-specific include directories
     set(COMPONENT_ADD_INCLUDEDIRS
-        "./include" # this is the location of wolfssl user_settings.h
+        "./include" # this is the location of local project wolfssl user_settings.h
         "\"${WOLFSSL_ROOT}/\""
         "\"${WOLFSSL_ROOT}/wolfssl/\""
         "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/\""
+        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/port/Espressif\""
         "\"${RTOS_IDF_PATH}/\""
         # wolfSSL release after v5.7 includes WiFi, time, and mem/debug helpers
-        ${THIS_IDF_PATH}/components/esp_event/include
+        "${THIS_IDF_PATH}/components/esp_event/include"
-        ${THIS_IDF_PATH}/components/esp_netif/include
+        "${THIS_IDF_PATH}/components/esp_netif/include"
-        ${THIS_IDF_PATH}/components/esp_wifi/include
+        "${THIS_IDF_PATH}/components/esp_wifi/include"
         )
 
-
+    # Optionally include cryptoauthlib if present
     if(IS_DIRECTORY ${IDF_PATH}/components/cryptoauthlib)
         list(APPEND COMPONENT_ADD_INCLUDEDIRS "../cryptoauthlib/lib")
     endif()
@@ -399,8 +721,8 @@ else()
         "\"${WOLFSSL_ROOT}/src/ssl_sess.c\""    # included by ssl.c
         "\"${WOLFSSL_ROOT}/src/x509.c\""
         "\"${WOLFSSL_ROOT}/src/x509_str.c\""
-        "\"${WOLFSSL_ROOT}/wolfcrypt/src/ext_kyber.c\""     # external Kyber disabled by default
+        "\"${WOLFSSL_ROOT}/wolfcrypt/src/ext_kyber.c\""     # external non-wolfssl Kyber disabled by default
-        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/ext_kyber.h\"" # external Kyber disabled by default
+        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/ext_kyber.h\"" # external non-wolfssl Kyber disabled by default
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/evp.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/misc.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_arm32.c\""
@@ -411,6 +733,7 @@ else()
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_cortexm.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64_asm.S\""
+        "\"${WOLFSSL_ROOT}/examples\"" # Examples are distributed in Managed Components, but not part of a project.
         "\"${EXCLUDE_ASM}\""
         )
 
@@ -432,22 +755,144 @@ else()
     # see https://docs.espressif.com/projects/esp-idf/en/stable/esp32/migration-guides/release-5.x/build-system.html?highlight=space%20path
     #
     set(EXTRA_COMPONENT_DIRS "${COMPONENT_SRCDIRS}")
-    idf_component_register(
+
-                            SRC_DIRS "${COMPONENT_SRCDIRS}"
+    if(WOLFSSL_ROOT)
-                            INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
+        # Only register the component if we found wolfSSL source.
-                            REQUIRES "${COMPONENT_REQUIRES}"
+        # This is important to allow Cmake to finish to completion, otherwise the UI
-                            EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+        # may not be able to display the Kconfig settings to fix a bad or missing source.
-                            PRIV_REQUIRES esp_timer driver # this will typically only be needed for wolfSSL benchmark
+        idf_component_register(
-                           )
+                                SRC_DIRS "${COMPONENT_SRCDIRS}"
-    # some optional diagnostics
+                                INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
-    if (1)
+                                REQUIRES "${COMPONENT_REQUIRES}"
+                                EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+                                PRIV_REQUIRES
+                                  "${THIS_ESP_TLS}"
+                                  "${THIS_INCLUDE_TIMER}"
+                                  "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
+                               )
+    else()
+        # Register the component simply to allow CMake to complete, but there's no wolfSSL source.
+        # Expect many other errors, but the project should at least be loadable and UI can edit Kconfig settings.
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component not registered as no source code found (WOLFSSL_ROOT is blank)")
+    endif()
+
+# function(WOLFSSL_INIT_CERT_BUNDLE)
+if( CONFIG_WOLFSSL_CERTIFICATE_BUNDLE
+    AND NOT CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+    AND NOT ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+  )
+    if (CMAKE_BUILD_EARLY_EXPANSION)
+        message(ERROR "Bundle Cert initialization must occur during CMAKE_BUILD_EARLY_EXPANSION")
+    endif()
+    # reminder: we need a value for wolfSSL root first!
+    if( "${WOLFSSL_ROOT}" STREQUAL "" )
+        message(ERROR "Certificate bundles need a value for WOLFSSL_ROOT")
+    endif()
+    set(WOLFSSL_ESP_CRT_BUNDLE_DIR ${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle)
+    message(STATUS "WOLFSSL_ESP_CRT_BUNDLE_DIR=${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    if(EXISTS "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+        set(bundle_name "x509_crt_bundle_wolfssl")
+
+        # For now the certs are in the same directory
+        set(DEFAULT_CRT_DIR "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+
+        # Generate custom certificate bundle using the generate_cert_bundle utility
+        set(GENERATE_CERT_BUNDLEPY ${python} ${WOLFSSL_ESP_CRT_BUNDLE_DIR}/gen_crt_bundle.py)
+
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+        elseif(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+            list(APPEND args --filter ${DEFAULT_CRT_DIR}/cmn_crt_authorities.csv)
+        endif()
+
+        # Add deprecated root certs if enabled. This config is not visible if the default cert
+        # bundle is not selected
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_deprecated.pem)
+        endif()
+
+        if(CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE)
+            get_filename_component(custom_bundle_path
+              ${CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH} ABSOLUTE BASE_DIR "${project_dir}")
+            list(APPEND crt_paths ${custom_bundle_path})
+            message(STATUS "Using a custom wolfSSL bundle path: ${custom_bundle_path}")
+        else()
+            message(STATUS "Not using a custom wolfSSL bundle path.")
+        endif()
+        list(APPEND args --input ${crt_paths} -q)
+
+        message(STATUS "CMAKE_CURRENT_BINARY_DIR: ${CMAKE_CURRENT_BINARY_DIR}")
+        get_filename_component(crt_bundle
+            ${bundle_name}
+            ABSOLUTE BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}")
+
+        message(STATUS "Setting up bundle generate: ${GENERATE_CERT_BUNDLEPY} ${args}")
+        message(STATUS "Depends on custom bundle path: ${custom_bundle_path}")
+        message(STATUS "crt_bundle ${crt_bundle}")
+        message(STATUS "COMPONENT_LIB ${COMPONENT_LIB}")
+        message(STATUS "GENERATE_CERT_BUNDLEPY ${GENERATE_CERT_BUNDLEPY}")
+        message(STATUS "args ${args}")
+        message(STATUS "cert_bundle ${cert_bundle}")
+
+        # Generate bundle according to config
+        # File is generated at build time, not cmake load
+        add_custom_command(OUTPUT ${crt_bundle}
+            COMMAND ${GENERATE_CERT_BUNDLEPY} ARGS ${args}
+            DEPENDS ${custom_bundle_path}
+            VERBATIM)
+
+        if(EXISTS "${crt_bundle}")
+            message(STATUS "Bundle file exists from prior build: ${crt_bundle}")
+        else()
+            message(STATUS "Bundle file expected during next build: ${crt_bundle}")
+        endif()
+
+        # Reminder the file is generated at build time, not cmake load time.
+        message(STATUS "wolfSSL Cert Bundle File to be created at build time in: ${crt_bundle}")
+
+        add_custom_target(custom_wolfssl_bundle DEPENDS ${cert_bundle})
+
+        # the wolfSSL crtificate bundle is baked into wolfSSL
+        add_dependencies(${COMPONENT_LIB} custom_wolfssl_bundle)
+
+        # COMPONENT_LIB may vary: __idf_wolfssl, __idf_esp_wolfssl, etc
+        # target_add_binary_data(__idf_wolfssl ${crt_bundle} BINARY)
+        target_add_binary_data(${COMPONENT_LIB} ${crt_bundle} BINARY)
+        set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+                     APPEND PROPERTY ADDITIONAL_CLEAN_FILES
+                     "${crt_bundle}")
+    else()
+        message(STATUS "WARNING: CONFIG_WOLFSSL_CERTIFICATE_BUNDLE enabled but directory not found: ${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    endif()
+endif()
+
+# endfunction() # WOLFSSL_INIT_CERT_BUNDLE
+
+    # Some optional diagnostics. Verbose ones are truncated.
+    if (VERBOSE_COMPONENT_MESSAGES)
         get_cmake_property(_variableNames VARIABLES)
         list (SORT _variableNames)
         message(STATUS "")
         message(STATUS "ALL VARIABLES BEGIN")
         message(STATUS "")
         foreach (_variableName ${_variableNames})
-            message(STATUS "${_variableName}=${${_variableName}}")
+            if (      ("${_variableName}" STREQUAL "bootloader_binary_files")
+                    OR ("${_variableName}" STREQUAL "Component paths")
+                    OR ("${_variableName}" STREQUAL "component_targets")
+                    OR ("${_variableName}" STREQUAL "__COMPONENT_TARGETS")
+                    OR ("${_variableName}" STREQUAL "CONFIGS_LIST")
+                    OR ("${_variableName}" STREQUAL "__CONFIG_VARIABLES")
+                    OR ("${_variableName}" STREQUAL "val")
+                    OR ("${_variableName}" MATCHES "^__idf_")
+               )
+                # Truncate the displayed value:
+                string(SUBSTRING "${${_variableName}}" 0 70 truncatedValue)
+                message(STATUS "${_variableName} = ${truncatedValue} ... (truncated)")
+            else()
+                message(STATUS "${_variableName}=${${_variableName}}")
+            endif()
         endforeach()
         message(STATUS "")
         message(STATUS "ALL VARIABLES END")
@@ -455,6 +900,12 @@ else()
     endif()
 
     # target_sources(wolfssl PRIVATE  "\"${WOLFSSL_ROOT}/wolfssl/\""  "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt\"")
+    message(STATUS "DETECTED_PROJECT_NAME=${CMAKE_PROJECT_NAME}")
+    message(STATUS "COMPONENT_TARGET=${COMPONENT_TARGET}")
+    target_compile_definitions(${COMPONENT_TARGET} PRIVATE DETECTED_PROJECT_NAME="${CMAKE_PROJECT_NAME}")
+    if( "${CMAKE_PROJECT_NAME}" STREQUAL "esp_http_client_example" )
+        target_compile_definitions(${COMPONENT_TARGET} PRIVATE APP_ESP_HTTP_CLIENT_EXAMPLE="y")
+    endif()
 
 endif() # CMAKE_BUILD_EARLY_EXPANSION
 
@@ -510,31 +961,80 @@ endfunction() # LIBWOLFSSL_SAVE_INFO
 
 # create some programmatic #define values that will be used by ShowExtendedSystemInfo().
 # see wolfcrypt\src\port\Espressif\esp32_utl.c
-if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+if(NOT CMAKE_BUILD_EARLY_EXPANSION AND WOLFSSL_ROOT)
     set (git_cmd "git")
     message(STATUS "Adding macro definitions:")
 
     # LIBWOLFSSL_VERSION_GIT_ORIGIN: git config --get remote.origin.url
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_ORIGIN "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_BRANCH: git rev-parse --abbrev-ref HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_BRANCH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH: git rev-parse HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_SHORT_HASH: git rev-parse --short HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH_DATE git show --no-patch --no-notes --pretty=\'\%cd\'
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd}
+                    "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
 
-    message(STATUS "************************************************************************************************")
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_WOLFSSL_ROOT "${WOLFSSL_ROOT}" "${TMP_RES}")
-    message(STATUS "wolfssl component config complete!")
+
-    message(STATUS "************************************************************************************************")
 endif()
+
+# Ensure flag "-DWOLFSSL_ESPIDF" is already in CMAKE_C_FLAGS if not yet found from project
+string(FIND "${CMAKE_C_FLAGS}" "-DWOLFSSL_ESPIDF" FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF)
+
+if(FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF EQUAL -1)
+    # Flag not found, append it
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_ESPIDF")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+endif()
+
+if(WOLFSSL_ROOT)
+    message(STATUS "Using wolfSSL in ${WOLFSSL_ROOT}")
+
+    # PlatformIO does not process script from from the Espressif cmake process.
+    # We need to know where wolfSSL source code was found, so save it in the
+    # PIO_WOLFSSL_ROOT environment variable to later be read by extra_script.py
+
+    set(ENV{PIO_WOLFSSL_ROOT} "${WOLFSSL_ROOT}")
+    message(STATUS "PIO_WOLFSSL_ROOT =  $ENV{PIO_WOLFSSL_ROOT}")
+    message(STATUS "PLATFORMIO_BUILD_DIR = $ENV{PLATFORMIO_BUILD_DIR}")
+    # See esp-tls Kconfig; menu "ESP-TLS", ESP_TLS_LIBRARY_CHOOSE
+    if(CONFIG_ESP_TLS_USING_WOLFSSL)
+        if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+            message(STATUS "This version of wolfSSL is not supported on the ESP8266 esp-tls at this time. Check ESP-TLS config")
+        else()
+            message(STATUS "wolfSSL will be used for ESP-TLS")
+        endif()
+    else()
+        message(STATUS "WARNING: wolfSSL NOT selected for ESP-TLS. Features and performance will be limited.")
+    endif()
+else()
+    message(STATUS "")
+    message(STATUS "Consider setting WOLFSSL_ROOT environment variable, use Kconfig setting, or set manually in this cmake file, above.")
+    message(STATUS "")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "ERROR: Could not find wolfSSL Source Code")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+endif()
+
+message(STATUS "************************************************************************************************")
+message(STATUS "wolfSSL component config complete!")
+message(STATUS "************************************************************************************************")

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/Kconfig

@@ -0,0 +1,523 @@
+# Kconfig template
+#
+# Copyright (C) 2006-2024 wolfSSL Inc.  All rights reserved.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+
+# Kconfig File Version 5.7.2.001 for esp-idf integration
+
+# Kconfig Format Rules
+#
+# See:
+#  https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/kconfig.html
+#
+# Format rules for Kconfig files are as follows:
+#
+# Option names in any menus should have consistent prefixes. The prefix
+# currently should have at least 3 characters.
+#
+# The unit of indentation should be 4 spaces. All sub-items belonging to a
+# parent item are indented by one level deeper. For example, menu is indented
+# by 0 spaces, config menu by 4 spaces, help in config by 8 spaces, and the
+# text under help by 12 spaces.
+#
+# No trailing spaces are allowed at the end of the lines.
+#
+# The maximum length of options is NOT 50 characters as documented.
+#   kconfcheck will complain that options should be 40 at most.
+#
+# Fix option lengths first. Superfluous errors on other lines may occur.
+#
+# The maximum length of lines is 120 characters.
+#
+# python -m kconfcheck <path_to_kconfig_file>
+#
+# ---------------------------------------------------------------------------------------------------------------------
+# Begin main wolfSSL configuration menu
+# ---------------------------------------------------------------------------------------------------------------------
+#   See ESP-IDF esp-tls component for config TLS_STACK_WOLFSSL
+
+menu "wolfSSL"
+
+    menu "Hardening"
+        config ESP_WOLFSSL_WC_NO_HARDEN
+            bool "Disable wolfSSL hardening"
+            default n
+            help
+                Sets WC_NO_HARDEN
+
+        config ESP_WOLFSSL_TFM_TIMING_RESISTANT
+            bool "Enable TFM Timing Resistant Code"
+            default n
+            help
+                Sets TFM_TIMING_RESISTANT.
+
+    endmenu # Hardening
+
+    config ESP_WOLFSSL_ENABLE_BENCHMARK
+        bool "Enable wolfSSL Benchmark Library"
+        default n
+        help
+            Enables wolfcrypt/benchmark/benchmark.c code for benchmark metrics. Disables NO_CRYPT_BENCHMARK.
+
+
+    menu "Benchmark Debug"
+        config ESP_DEBUG_WOLFSSL_BENCHMARK_TIMING
+            bool "Enable benchmark timing debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Enable wolfssl debug for benchmark metric timing (CPU Cycles, RTOS ticks, etc).
+
+        config ESP_WOLFSSL_BENCHMARK_TIMER_DEBUG
+            bool "Enable benchmark timer debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Turn on timer debugging (used when CPU cycles not available)
+
+    endmenu # Benchmark Debug
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # wolfCrypt Test
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ENABLE_TEST
+        bool "Enable wolfCrypt Test Library"
+        default n
+        help
+            Enables wolfcrypt/test/test.c code for testing. Disables NO_CRYPT_TEST.
+
+    menu "wolfCrypt tests"
+        config WOLFSSL_HAVE_WOLFCRYPT_TEST_OPTIONS
+            bool "Enable wolfCrypt Test Options"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables HAVE_WOLFCRYPT_TEST_OPTIONS
+
+        config TEST_ESPIDF_ALL_WOLFSSL
+            bool "Enable all features to use in tests"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables TEST_ESPIDF_ALL_WOLFSSL
+
+    endmenu # wolfCrypt tests
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # Apple HomeKit Options
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Apple HomeKit"
+        config WOLFSSL_APPLE_HOMEKIT
+            bool "Enable Apple HomeKit options"
+            default n
+            help
+                Enables FP_MAX_BITS (8192 * 2), SRP, ChaCha, Poly1305, Base64 encoding needed for Apple HomeKit.
+    endmenu # Apple HomeKit
+    # -----------------------------------------------------------------------------------------------------------------
+
+    config ESP_WOLFSSL_DISABLE_MY_ECC
+        bool "Disable ECC in my project"
+        default "n"
+        help
+            ECC is enabled by default. Select this option to disable.
+
+    config ESP_WOLFSSL_ENABLE_MY_USE_RSA
+        bool "Enable RSA in my project"
+        default "n"
+        help
+            RSA is disabled by default. Select this option to enable.
+
+    config ESP_WOLFSSL_BENCHMARK
+        bool "Enable wolfSSL Benchmark"
+        default n
+        help
+            Enables user settings relevant to benchmark code
+
+    config ESP_TLS_USING_WOLFSSL_SPECIFIED
+        bool "Use the specified wolfssl for ESP-TLS"
+        default Y
+        help
+            Includes wolfSSL from specified directory (not using esp-wolfssl).
+
+    config ESP_WOLFSSL_NO_USE_FAST_MATH
+        bool "Disable FAST_MATH library and all ESP32 Hardware Acceleration"
+        select ESP_WOLFSSL_NO_HW
+        select ESP_WOLFSSL_NO_HW_AES
+        select ESP_WOLFSSL_NO_HW_HASH
+        select ESP_WOLFSSL_NO_HW_RSA_PRI
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+
+    menu "Protocol Config"
+        config WOLFSSL_HAVE_ALPN
+            bool "Enable ALPN (Application Layer Protocol Negotiation) in wolfSSL"
+            default y
+
+        config WOLFSSL_ALLOW_TLS13
+            bool "Allow TLS 1.3"
+            default y
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_ALLOW_TLS12
+            bool "Allow TLS 1.2"
+            default n
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_HAVE_TLS_EXTENSIONS
+            bool "Enable TLS Extensions"
+            default y
+            help
+                Sets HAVE_TLS_EXTENSIONS which is needed for TLS 1.3, SNI, ALPN, and more.
+
+        config WOLFSSL_ALT_CERT_CHAINS
+            bool "Enable Alternate Certificate Chains"
+            default n
+            help
+                The option relaxes the default strict wolfSSL certificate chain processing. This
+                will typically need to be enabled when loading only a CA file. Typically solves
+                the -188 ASN_NO_SIGNER_E error. Use with caution.
+
+        config WOLFSSL_HAVE_OCSP
+            bool "Enable OCSP (Online Certificate Status Protocol) in wolfSSL"
+            default n
+            help
+                Sets HAVE_OCSP
+
+    endmenu # Protocol Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config TLS_STACK_WOLFSSL
+        # Invisible option that locks TLS_STACK_WOLFSSL to ESP_TLS_USING_WOLFSSL
+        bool
+        default n
+        select FREERTOS_ENABLE_BACKWARD_COMPATIBILITY
+        help
+            Includes wolfSSL in ESP-TLS so that it can be compiled with wolfSSL as its SSL/TLS library.
+            Enabled when wolfSSL is selected in ESP_TLS_LIBRARY_CHOOSE.
+
+    menu "wolfSSL ESP-TLS"
+        depends on ESP_TLS_USING_WOLFSSL
+
+        menu "Certificate Bundle"
+            depends on ESP_TLS_USING_WOLFSSL
+
+            config WOLFSSL_CERTIFICATE_BUNDLE
+                bool "Enable trusted root certificate bundle"
+                default y if ESP_TLS_USING_WOLFSSL
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Enable support for large number of default root certificates
+
+                    When enabled this option allows user to store default as well
+                    as customer specific root certificates in compressed format rather
+                    than storing full certificate. For the root certificates the public key and the subject name
+                    will be stored.
+
+            config WOLFSSL_NO_ASN_STRICT
+                bool "Relax Certificate ASN Strict Checks"
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Allows sub-optimal certificate ASN checks. Unless using a bundle with known issues,
+                    it is recommended to NOT enable this.
+
+            config WOLFSSL_ASN_ALLOW_0_SERIAL
+                bool "Allow cert missing an ASN Serial Number"
+                default y
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Although not recommended, there may be certificates in the bundle that are missing
+                    a serial number. This option allows the missing value without having to fully
+                    disable strict ASN checking with WOLFSSL_NO_ASN_STRICT.
+
+            choice WOLFSSL_DEFAULT_CERTIFICATE_BUNDLE
+                bool "Default certificate bundle options"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+                    bool "Use the full default certificate bundle"
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN
+                    bool "Use only the most common certificates from the default bundles"
+                    help
+                        Use only the most common certificates from the default bundles, reducing the size with 50%,
+                        while still having around 99% coverage.
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                    bool "Do not use the default certificate bundle"
+            endchoice
+
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default n
+                bool "Add custom certificates to the default bundle"
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH
+                depends on WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                string "Custom certificate bundle path"
+                help
+                    Name of the custom certificate directory or file. This path is evaluated
+                    relative to the project root directory.
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST
+                bool "Add deprecated root certificates"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL && !WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                help
+                    Include the deprecated list of root certificates in the bundle.
+                    This list gets updated when a certificate is removed from the Mozilla's
+                    NSS root certificate store. This config can be enabled if you would like
+                    to ensure that none of the certificates that were deployed in the product
+                    are affected because of the update to bundle. In turn, enabling this
+                    config keeps expired, retracted certificates in the bundle and it may
+                    pose a security risk.
+
+                    - Deprecated cert list may grow based based on sync with upstream bundle
+                    - Deprecated certs would be be removed in ESP-IDF (next) major release
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_MAX_CERTS
+                int "Maximum no of certificates allowed in certificate bundle"
+                default 200
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+
+        endmenu
+    endmenu # wolfSSL ESP-TLS
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+        bool "Modify default hardware acceleration settings"
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+            Typically used for debugging, analysis, or optimizations. The default
+            hardware acceleration features can be each manually adjusted.
+
+    menu "wolfSSL Hardware Acceleration"
+
+        config ESP_WOLFSSL_NO_ESP32_CRYPT
+            bool "Disable all ESP32 Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_AES
+            select ESP_WOLFSSL_NO_HW_HASH
+            select ESP_WOLFSSL_NO_HW_RSA_PRI
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_ESP32_CRYPT.
+                Consider disabling FASTMATH (other libraries are faster in software and smaller)
+
+        config ESP_WOLFSSL_NO_HW_AES
+            bool "Disable all ESP32 AES Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.When selected defines: NO_HW_AES
+
+        config ESP_WOLFSSL_NO_HW_HASH
+            bool "Disable all ESP32 SHA Hash Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_HASH
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI
+            bool "Disable all ESP32 RSA Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            bool "Disable all ESP32 Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MP_MUL
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            bool "Disable all ESP32 Modular Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MULMOD
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            bool "Disable all ESP32 RSA Exponential Math Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.
+                Select this option to force disable: NO_HW_RSA_PRI_EXPTMOD
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
+            bool "Enable debugging of RSA Multiplication operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                multiplication operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+            bool "Enable debugging of RSA Modular operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                modular math operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+    endmenu # wolfSSL Hardware Acceleration
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Experimental Options"
+
+        config ESP_WOLFSSL_EXPERIMENTAL_SETTINGS
+            bool "Enable wolfSSL Experimental Settings"
+            default n
+            help
+                Enables experimental settings for wolfSSL. See documentation.
+
+        config ESP_WOLFSSL_ENABLE_KYBER
+            bool "Enable wolfSSL Kyber"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+    endmenu # wolfSSL Experimental Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Debug Options"
+        config ESP_WOLFSSL_DEBUG_WOLFSSL
+            bool "Enable wolfSSL Debugging"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+        config ESP_WOLFSSL_TEST_LOOP
+            bool "Run test apps in a loop until failure"
+            default y
+            help
+                Enable a loop wrapper for benchmark, http_client, and wolfssl test apps.
+
+    endmenu # wolfSSL Debug Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Customization"
+        config CUSTOM_SETTING_WOLFSSL_ROOT
+            string "Enter a path for wolfSSL source code"
+            default "~/workspace/wolfssl"
+            help
+                This option lets you specify a directory for the wolfSSL source code (typically a git clone).
+                Enter the path using forward slashes (e.g., C:/myfolder/mysubfolder) or double backslashes
+                (e.g., C:\\myfolder\\mysubfolder).
+
+    endmenu # wolfSSL Customization
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Component Config"
+        config IGNORE_ESP_IDF_WOLFSSL_COMPONENT
+            bool "Ignore the ESP-IDF component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the esp-idf/components directory. Requires wolfssl as a local component.
+
+        config IGNORE_LOCAL_WOLFSSL_COMPONENT
+            bool "Ignore the local component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the local project components directory.
+                Requires wolfssl as a ESP-IDF component.
+
+    endmenu # Component Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Utility Config"
+        config USE_WOLFSSL_ESP_SDK_TIME
+            bool "Enable wolfSSL time helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+        config USE_WOLFSSL_ESP_SDK_WIFI
+            bool "Enable wolfSSL WiFi helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+    endmenu # Utility Config
+endmenu # wolfSSL
+# ---------------------------------------------------------------------------------------------------------------------
+
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfSSH"
+    config ESP_ENABLE_WOLFSSH
+        bool "Enable wolfSSH options"
+        default n
+        help
+            Enables WOLFSSH_TERM, WOLFSSL_KEY_GEN, WOLFSSL_PTHREADS, WOLFSSH_TEST_SERVER, WOLFSSH_TEST_THREADING
+
+    config ESP_WOLFSSL_DEBUG_WOLFSSH
+        bool "Enable wolfSSH debugging"
+        default n
+        help
+            Enable wolfSSH debugging macro. See user_settings.h
+
+endmenu # wolfSSH
+# ---------------------------------------------------------------------------------------------------------------------
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfMQTT"
+    config ESP_ENABLE_WOLFMQTT
+        bool "Enable wolfMQTT options"
+        default n
+        help
+            Enables WOLFMQTT
+
+    config ESP_WOLFSSL_DEBUG_WOLFMQTT
+        bool "Enable wolfMQTT debugging"
+        default n
+        help
+            Enable wolfMQTT debugging macro. See user_settings.h
+
+endmenu # wolfMQTT
+# ---------------------------------------------------------------------------------------------------------------------

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/README.md

@@ -0,0 +1,162 @@
+# wolfSSL Espressif Component
+
+This is the directory for wolfSSL as an Espressif ESP-IDF component.
+
+Other options are available, such as installing wolfSSL as a local _project_ component using the [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/).
+
+Enabling this wolfSSL ESP-IDF component allows other ESP-IDF libraries such as those that depend on [ESP-TLS](https://github.com/espressif/esp-idf/tree/master/components/esp-tls)
+to also use the wolfSSL library. (See [github.com/wolfSSL/wolfssl](https://github.com/wolfSSL/wolfssl))
+
+The wolfSSL source code is not included here. Instead, the `idf.py menuconfig` option can be used to configure the
+`sdkconfig` file setting: `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` to point to the desired wolfSSL code.
+
+## Directory Contents
+
+This directory must contain, at a minimum:
+
+- `CMakeLists.txt`
+- `./include/user_settings.h`
+
+The directory should also contain:
+- `Kconfig`
+- `component.mk`
+
+The directory may contain wolfSSL source, for example with a [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/),
+or if the `setup.sh` script was used from [wolfSSL/IDE/Espressif/ESP-IDF](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF).
+
+
+Under normal circumstances when the wolfSSL source is not included here, the `CMakeLists.txt` will search for it in this order:
+
+- A hard-coded `WOLFSSL_ROOT` cmake variable.
+- `WOLFSSL_ROOT` Environment Variable
+- The `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` value in the `sdkconfig` file, from the `Kconfig` option.
+- Any parent directories, up to the root (if this directory is in the ESP-IDF components)
+- Any parent directories, up to the root (if this directory is a project component)
+
+While recursing up the directory tree, the following names of wolfSSL directories will be considered:
+
+- `wolfssl-[current user name]`
+- `wolfssl-master`
+- `wolfssl`
+
+## Getting Started
+
+See the `Espressif Getting Started Guide`.
+
+```
+# Set environment variable to ESP-IDF location
+# For example, VisualGDB in WSL
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-master/esp-idf/v5.3-master
+
+# Or wherever the ESP-IDF is installed:
+WRK_IDF_PATH=~/esp/esp-idf
+
+echo "Run export.sh from ${WRK_IDF_PATH}"
+. ${WRK_IDF_PATH}/export.sh
+
+cd [your project]
+
+idf.py menuconfig
+```
+
+Enable wolfSSL to be used in the ESP-TLS:
+
+```
+Component config  --->
+    ESP-TLS  --->
+        Choose SSL/TLS library for ESP-TLS (See help for more Info)
+            (X) wolfSSL (License info in wolfSSL directory README)
+```
+
+Adjust wolfSSL settings, such as path to source code as needed:
+
+```
+Component config  --->
+    wolfSSL  --->
+        [*] Include wolfSSL in ESP-TLS
+        [*] Use the specified wolfssl for ESP-TLS
+        (~/workspace/wolfssl) Enter a path for wolfSSL source code
+```
+
+## Configuration
+
+All settings for wolfSSL are adjusted in the [include/user_settings.h](./include/user_settings.h) file.
+
+The `user_settings.h` file should not be included directly. Instead, `#include <wolfssl/wolfcrypt/settings.h>`
+before any other wolfSSL headers, like this:
+
+
+```c
+/* ESP-IDF */
+#include <esp_log.h>
+#include "sdkconfig.h"
+
+/* wolfSSL */
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
+#if defined(WOLFSSL_USER_SETTINGS)
+    #include <wolfssl/wolfcrypt/settings.h>
+    #if defined(WOLFSSL_ESPIDF)
+        #include <wolfssl/version.h>
+        #include <wolfssl/wolfcrypt/types.h>
+        #include <wolfcrypt/test/test.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+    #else
+        #error "Problem with wolfSSL user_settings. "           \
+               "Check components/wolfssl/include "              \
+               "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+               "typically in the component CMakeLists.txt"
+    #endif
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
+#endif
+```
+
+## Examples
+
+See the wolfSSL examples:
+
+- [wolfSSL Core Examples](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples)
+- [wolfSSL Additional Examples](https://github.com/wolfSSL/wolfssl-examples/tree/master/ESP32)
+- [wolfSSH Core Examples](https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples)
+- [wolfSSH Additional Examples](https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif)
+- [wolfMQTT Examples](https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples)
+
+## Platforms
+
+The ESP-IDF wolfSSL is also available for PlatformIO:
+
+- [Release wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl)
+- [Staging / Preview wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl-staging)
+
+The wolfSSL library can also be used for Espressif with Arduino:
+
+- [arduino.cc/reference/en/libraries/wolfssl](https://www.arduino.cc/reference/en/libraries/wolfssl/)
+- [github.com/wolfSSL/Arduino-wolfSSL](https://github.com/wolfSSL/Arduino-wolfSSL)
+
+
+## Additional Information
+
+- [wolfSSL Documentation](https://www.wolfssl.com/documentation/manuals/wolfssl/index.html) and [docs/espressif](https://www.wolfssl.com/docs/espressif/)
+- [wolfSSL FAQ](https://www.wolfssl.com/docs/frequently-asked-questions-faq/)
+- [wolfSSL Products](https://www.wolfssl.com/products/)
+- [www.wolfssl.com/espressif](https://www.wolfssl.com/espressif/)
+- [More...](https://www.wolfssl.com/?s=espressif)
+
+## Contact
+
+Have a specific request or questions? We'd love to hear from you! Please contact us at support@wolfssl.com or open an issue on GitHub.
+
+## Licensing and Support
+
+wolfSSL (formerly known as CyaSSL) and wolfCrypt are either licensed for use under the GPLv2 (or at your option any later version) or a standard commercial license. For our users who cannot use wolfSSL under GPLv2 (or any later version), a commercial license to wolfSSL and wolfCrypt is available.
+
+See the LICENSE.txt, visit wolfssl.com/license, contact us at licensing@wolfssl.com or call +1 425 245 8247
+
+View Commercial Support Options: [wolfssl.com/products/support-and-maintenance](wolfssl.com/products/support-and-maintenance)
+

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/component.mk

@@ -20,7 +20,7 @@
 
 $(info ***********  wolfssl component ************)
 
- #
+#
 # Component Makefile
 #
 #
@@ -82,7 +82,7 @@ WOLFSSL_ROOT := ../../../../../../..
 # "/mnt/c" is 4 directories up:
 #             2 for `./test/demo` from where we run `make`, plus
 #             2 more from the location of `component.mk` located
-#               in `[currect directory]/components/wolfssl`.
+#               in `[current directory]/components/wolfssl`.
 #
 # Thus we need 4 parent reference to find the relative path to wolfSSL:
 # WOLFSSL_ROOT := ../../../../workspace/wolfssl-master

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/include/user_settings.h

@@ -1,4 +1,4 @@
-/* user_settings.h
+/* wolfssl-component include/user_settings.h
  *
  * Copyright (C) 2006-2024 wolfSSL Inc.
  *
@@ -18,18 +18,195 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+#define WOLFSSL_ESPIDF_COMPONENT_VERSION 0x01
 
-/* Standardized wolfSSL Espressif ESP32 + ESP8266 user_settings.h V5.6.6-01 */
+/* The Espressif project config file. See also sdkconfig.defaults */
-
-/* This user_settings.h is for Espressif ESP-IDF */
-
 #include "sdkconfig.h"
 
-/* #define DEBUG_WOLFSSL */
+/* This user_settings.h is for Espressif ESP-IDF
-/* #define DEBUG_WOLFSSL_VERBOSE */
+ *
+ * Standardized wolfSSL Espressif ESP32 + ESP8266 user_settings.h V5.7.0-1
+ *
+ * Do not include any wolfssl headers here.
+ *
+ * When editing this file:
+ * ensure all examples match. The template example is the reference.
+ */
+
+/* Naming convention: (see also esp32-crypt.h for the reference source).
+ *
+ * CONFIG_
+ *      This prefix indicates the setting came from the sdkconfig / Kconfig.
+ *
+ *      May or may not be related to wolfSSL.
+ *
+ *      The name after this prefix must exactly match that in the Kconfig file.
+ *
+ * WOLFSSL_
+ *      Typical of many, but not all wolfSSL macro names.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      May or may not have a corresponding sdkconfig / Kconfig control.
+ *
+ * ESP_WOLFSSL_
+ *      These are NOT valid wolfSSL macro names. These are names only used in
+ *      the ESP-IDF Kconfig files. When parsed, they will have a "CONFIG_"
+ *      suffix added. See next section.
+ *
+ * CONFIG_ESP_WOLFSSL_
+ *      This is a wolfSSL-specific macro that has been defined in the ESP-IDF
+ *      via the sdkconfig / menuconfig. Any text after this prefix should
+ *      exactly match an existing wolfSSL macro name.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      These macros may also be specific to only the project or environment,
+ *      and possibly not used anywhere else in the wolfSSL libraries.
+ */
+
+/* The Espressif sdkconfig will have chipset info.
+**
+** Some possible values:
+**
+**   CONFIG_IDF_TARGET_ESP32
+**   CONFIG_IDF_TARGET_ESP32S2
+**   CONFIG_IDF_TARGET_ESP32S3
+**   CONFIG_IDF_TARGET_ESP32C3
+**   CONFIG_IDF_TARGET_ESP32C6
+*/
+
+#undef  WOLFSSL_ESPIDF
+#define WOLFSSL_ESPIDF
+
+/* Test various user_settings between applications by selecting example apps
+ * in `idf.py menuconfig` for Example wolfSSL Configuration settings: */
+
+/* Turn on messages that are useful to see only in examples. */
+#define WOLFSSL_EXAMPLE_VERBOSITY
+
+/* Paths can be long, ensure the entire value printed during debug */
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+/* wolfSSL Examples: set macros used in example applications.
+ *
+ * These Settings NOT available in ESP-IDF (e.g. esp-tls)
+ *
+ * Any settings needed by ESP-IDF components should be explicitly set,
+ * and not by these example-specific settings via CONFIG_WOLFSSL_EXAMPLE_n
+ *
+ * ESP-IDF settings should be Kconfig "CONFIG_[name]" values when possible. */
+#if defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/template */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEST)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_test */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define TEST_ESPIDF_ALL_WOLFSSL
+
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_BENCHMARK)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_CLIENT)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_client */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_SERVER)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfSSH Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_echoserver */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP32_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP32/ESP32-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP8266_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP8266/ESP8266-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfMQTT Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/wolfmqtt_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_AWS_IOT_MQTT)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/AWS_IoT_MQTT */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfTPM Examples */
+#elif defined(CONFIG_WOLFTPM_EXAMPLE_NAME_ESPRESSIF)
+    /* See https://github.com/wolfSSL/wolfTPM/tree/master/IDE/Espressif */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Apple HomeKit Examples */
+#elif defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+    /* See https://github.com/AchimPieters/esp32-homekit-demo */
+
+/* no example selected */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_NONE)
+    /* We'll assume the app needs to use wolfSSL sdk lib function */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Other applications detected by cmake */
+#elif defined(APP_ESP_HTTP_CLIENT_EXAMPLE)
+    /* The wolfSSL Version of the client example */
+    #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C2)
+        /* Less memory available, so smaller key sizes: */
+        #define FP_MAX_BITS (4096 * 2)
+    #else
+        #define FP_MAX_BITS (8192 * 2)
+    #endif
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+
+#elif defined(APP_ESP_HTTP_CLIENT)
+    /* The ESP-IDF Version */
+    #define FP_MAX_BITS (8192 * 2)
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+#else
+    #ifdef WOLFSSL_ESPIDF
+        /* #warning "App config undetected" */
+    #endif
+    /* the code is older or does not have application name defined. */
+#endif /* Example wolfSSL Configuration app settings */
 
 /* Experimental Kyber */
-#if 0
+#ifdef CONFIG_WOLFSSL_ENABLE_KYBER
+    /* Kyber typically needs a minimum 10K stack */
     #define WOLFSSL_EXPERIMENTAL_SETTINGS
     #define WOLFSSL_HAVE_KYBER
     #define WOLFSSL_WC_KYBER
@@ -58,14 +235,72 @@
 **   CONFIG_IDF_TARGET_ESP32C6
 */
 
-#undef  WOLFSSL_ESPIDF
+/* Optionally enable Apple HomeKit from compiler directive or Kconfig setting */
-#define WOLFSSL_ESPIDF
+#if defined(WOLFSSL_APPLE_HOMEKIT) || defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+     /* SRP is known to need 8K; slow on some devices */
+     #define FP_MAX_BITS (8192 * 2)
+     #define WOLFCRYPT_HAVE_SRP
+     #define HAVE_CHACHA
+     #define HAVE_POLY1305
+     #define WOLFSSL_BASE64_ENCODE
+ #endif /* Apple HomeKit settings */
 
-/* We don't use WiFi helpers yet, so don't compile in the esp-sdk-lib WiFi */
+/* Used by ESP-IDF components: */
-#define NO_ESP_SDK_WIFI
+#if defined(CONFIG_ESP_TLS_USING_WOLFSSL)
+    /* The ESP-TLS */
+    #ifndef FP_MAX_BITS
+        #if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+            defined(CONFIG_IDF_TARGET_ESP8684) || \
+            defined(CONFIG_IDF_TARGET_ESP8266)
+            /* Optionally set smaller size here */
+            #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+        #else
+            #define FP_MAX_BITS (4096 * 2)
+        #endif
+    #endif
+    #define HAVE_ALPN
+    #ifndef CONFIG_IDF_TARGET_ESP8266
+        /* Unless installed in the ESP8266 RTOS SDK locally, the wolfSSL
+         * API for SNI will not be seen in the components/esp-tls layer.
+         * Only enable SNI for non-ESP8266 targets by default: */
+        #define HAVE_SNI
+    #endif
+    #define OPENSSL_EXTRA_X509_SMALL
+
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+#endif
+
+/* Optionally enable some wolfSSH settings */
+#if defined(ESP_ENABLE_WOLFSSH) || defined(CONFIG_ESP_ENABLE_WOLFSSH)
+    /* The default SSH Windows size is massive for an embedded target.
+     * Limit it: */
+    #define DEFAULT_WINDOW_SZ 2000
+
+    /* These may be defined in cmake for other examples: */
+    #undef  WOLFSSH_TERM
+    #define WOLFSSH_TERM
+
+    /* optional debug */
+    /* #undef  DEBUG_WOLFSSH */
+    /* #define DEBUG_WOLFSSH */
+
+    #undef  WOLFSSL_KEY_GEN
+    #define WOLFSSL_KEY_GEN
+
+    #undef  WOLFSSL_PTHREADS
+    #define WOLFSSL_PTHREADS
+
+    #define WOLFSSH_TEST_SERVER
+    #define WOLFSSH_TEST_THREADING
+#endif /* ESP_ENABLE_WOLFSSH */
+
+
+/* Not yet using WiFi lib, so don't compile in the esp-sdk-lib WiFi helpers: */
+/* #define USE_WOLFSSL_ESP_SDK_WIFI */
 
 /*
- * ONE of these Espressif chipsets should be defined:
+ * ONE of these Espressif chip families will be detected from sdkconfig:
  *
  * WOLFSSL_ESP32
  * WOLFSSL_ESPWROOM32SE
@@ -84,11 +319,28 @@
 #endif
 /* See below for chipset detection from sdkconfig.h */
 
+/* when you want to use SINGLE THREAD. Note Default ESP-IDF is FreeRTOS */
+#define SINGLE_THREADED
+
 /* Small session cache saves a lot of RAM for ClientCache and SessionCache.
  * Memory requirement is about 5KB, otherwise 20K is needed when not specified.
  * If extra small footprint is needed, try MICRO_SESSION_CACHE (< 1K)
- * When really desperate, try NO_SESSION_CACHE.  */
+ * When really desperate or no TLS used, try NO_SESSION_CACHE.  */
-#define MICRO_SESSION_CACHE
+#define NO_SESSION_CACHE
+
+/* Small Stack uses more heap. */
+#define WOLFSSL_SMALL_STACK
+
+/* Full debugging turned off, but show malloc failure detail */
+/* #define DEBUG_WOLFSSL */
+#define DEBUG_WOLFSSL_MALLOC
+
+/* See test.c that sets cert buffers; we'll set them here: */
+#define USE_CERT_BUFFERS_256
+#define USE_CERT_BUFFERS_2048
+
+/* RSA_LOW_MEM: Half as much memory but twice as slow. */
+#define RSA_LOW_MEM
 
 /* optionally turn off SHA512/224 SHA512/256 */
 /* #define WOLFSSL_NOSHA512_224 */
@@ -103,19 +355,41 @@
 
 #define BENCH_EMBEDDED
 
-#define WOLFSSL_SMALL_STACK
-#define HAVE_ECC
-#define RSA_LOW_MEM
-
 /* TLS 1.3                                 */
-#define WOLFSSL_TLS13
+#ifdef CONFIG_WOLFSSL_ALLOW_TLS13
-#define HAVE_TLS_EXTENSIONS
+    #define WOLFSSL_TLS13
-#define WC_RSA_PSS
+    #define HAVE_TLS_EXTENSIONS
-#define HAVE_HKDF
+    #define HAVE_HKDF
-#define HAVE_AEAD
-#define HAVE_SUPPORTED_CURVES
 
-#define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+    /* May be required */
+    #ifndef HAVE_AEAD
+    #endif
+
+    /* Required for ECC */
+    #define HAVE_SUPPORTED_CURVES
+
+    /* Required for RSA */
+    #define WC_RSA_PSS
+
+    /* TLS 1.3 normally requires HAVE_FFDHE */
+    #if defined(HAVE_FFDHE_2048) || \
+        defined(HAVE_FFDHE_3072) || \
+        defined(HAVE_FFDHE_4096) || \
+        defined(HAVE_FFDHE_6144) || \
+        defined(HAVE_FFDHE_8192)
+    #else
+        #define HAVE_FFDHE_2048
+        /* #error "TLS 1.3 requires HAVE_FFDHE_[nnnn]" */
+    #endif
+#endif
+
+#if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+    defined(CONFIG_IDF_TARGET_ESP8684)
+    /* Optionally set smaller size here */
+    #define HAVE_FFDHE_4096
+#else
+    #define HAVE_FFDHE_4096
+#endif
 
 #define NO_FILESYSTEM
 
@@ -132,30 +406,72 @@
 /* when you want to use SHA384 */
 #define WOLFSSL_SHA384
 
-#if defined(CONFIG_IDF_TARGET_ESP8266)
+/* Some features not enabled for ESP8266: */
+#if defined(CONFIG_IDF_TARGET_ESP8266) || \
+    defined(CONFIG_IDF_TARGET_ESP32C2)
     /* Some known low-memory devices have features not enabled by default. */
+    /* TODO determine low memory configuration for ECC. */
 #else
     /* when you want to use SHA512 */
     #define WOLFSSL_SHA512
 
     /* when you want to use SHA3 */
-    #define WOLFSSL_SHA3
+    /* #define WOLFSSL_SHA3 */
 
     /* ED25519 requires SHA512 */
     #define HAVE_ED25519
+#endif
 
-    #define HAVE_ECC
+#if defined(CONFIG_IDF_TARGET_ESP8266) || defined(CONFIG_IDF_TARGET_ESP32C2)
-    #define HAVE_CURVE25519
+    #define MY_USE_ECC 0
-    #define CURVE25519_SMALL
+    #define MY_USE_RSA 1
-    #define HAVE_ED25519
+#else
+    #define MY_USE_ECC 1
+    #define MY_USE_RSA 0
+#endif
+
+/* We can use either or both ECC and RSA, but must use at least one. */
+#if MY_USE_ECC || MY_USE_RSA
+    #if MY_USE_ECC
+        /* ---- ECDSA / ECC ---- */
+        #define HAVE_ECC
+        #define HAVE_CURVE25519
+        #define HAVE_ED25519
+        #define WOLFSSL_SHA512
+        /*
+        #define HAVE_ECC384
+        #define CURVE25519_SMALL
+        */
+    #else
+        #define WOLFSSH_NO_ECC
+        /* WOLFSSH_NO_ECDSA is typically defined automatically,
+         * here for clarity: */
+        #define WOLFSSH_NO_ECDSA
+    #endif
+
+    #if MY_USE_RSA
+        /* ---- RSA ----- */
+        /* #define RSA_LOW_MEM */
+
+        /* DH disabled by default, needed if ECDSA/ECC also turned off */
+        #define HAVE_DH
+    #else
+        #define WOLFSSH_NO_RSA
+    #endif
+#else
+    #error "Either RSA or ECC must be enabled"
 #endif
 
 /* Optional OpenSSL compatibility */
 /* #define OPENSSL_EXTRA */
 
-/* when you want to use pkcs7 */
+/* #Optional HAVE_PKCS7 */
 /* #define HAVE_PKCS7 */
+
 #if defined(HAVE_PKCS7)
+    /* HAVE_PKCS7 may enable HAVE_PBKDF2 see settings.h */
+    #define NO_PBKDF2
+
     #define HAVE_AES_KEYWRAP
     #define HAVE_X963_KDF
     #define WOLFSSL_AES_DIRECT
@@ -175,25 +491,11 @@
     /* #define CUSTOM_SLOT_ALLOCATION                              */
 #endif
 
-/* RSA primitive specific definition */
+/* WC_NO_CACHE_RESISTANT: slower but more secure */
-#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
+/* #define WC_NO_CACHE_RESISTANT */
-    /* Define USE_FAST_MATH and SMALL_STACK                        */
-    #define ESP32_USE_RSA_PRIMITIVE
 
-    #if defined(CONFIG_IDF_TARGET_ESP32)
+/* TFM_TIMING_RESISTANT: slower but more secure */
-
+/* #define TFM_TIMING_RESISTANT */
-        /* NOTE HW unreliable for small values! */
-        /* threshold for performance adjustment for HW primitive use   */
-        /* X bits of G^X mod P greater than                            */
-        #undef  ESP_RSA_EXPT_XBITS
-        #define ESP_RSA_EXPT_XBITS 32
-
-        /* X and Y of X * Y mod P greater than                         */
-        #undef  ESP_RSA_MULM_BITS
-        #define ESP_RSA_MULM_BITS  16
-
-    #endif
-#endif
 
 /* #define WOLFSSL_ATECC508A_DEBUG         */
 
@@ -204,23 +506,40 @@
 /* #define XTIME time */
 
 
-/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
+/* Adjust wait-timeout count if you see timeout in RSA HW acceleration.
-#define ESP_RSA_TIMEOUT_CNT    0x249F00
+ * Set to very large number and enable WOLFSSL_HW_METRICS to determine max. */
+#ifndef ESP_RSA_TIMEOUT_CNT
+	#define ESP_RSA_TIMEOUT_CNT 0xFF0000
+#endif
 
-#define HASH_SIZE_LIMIT /* for test.c */
+/* hash limit for test.c */
+#define HASH_SIZE_LIMIT
 
 /* USE_FAST_MATH is default */
 #define USE_FAST_MATH
 
 /*****      Use SP_MATH      *****/
-/* #undef USE_FAST_MATH          */
+/* #undef  USE_FAST_MATH         */
 /* #define SP_MATH               */
 /* #define WOLFSSL_SP_MATH_ALL   */
+/* #define WOLFSSL_SP_RISCV32    */
 
 /***** Use Integer Heap Math *****/
 /* #undef USE_FAST_MATH          */
 /* #define USE_INTEGER_HEAP_MATH */
 
+/* Just syntax highlighting to check math libraries: */
+#if defined(SP_MATH)               || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_FAST_MATH)         || \
+    defined(WOLFSSL_SP_MATH_ALL)   || \
+    defined(WOLFSSL_SP_RISCV32)
+#endif
+
+#define WOLFSSL_SMALL_STACK
+
+
 #define HAVE_VERSION_EXTENDED_INFO
 /* #define HAVE_WC_INTROSPECTION */
 
@@ -230,13 +549,26 @@
 
 /* #define HAVE_HASHDRBG */
 
+#if 0
+/* Example for additional cert functions */
 #define WOLFSSL_KEY_GEN
-#define WOLFSSL_CERT_REQ
+    #define WOLFSSL_CERT_REQ
-#define WOLFSSL_CERT_GEN
+    #define WOLFSSL_CERT_GEN
-#define WOLFSSL_CERT_EXT
+    #define WOLFSSL_CERT_EXT
-#define WOLFSSL_SYS_CA_CERTS
+    #define WOLFSSL_SYS_CA_CERTS
 
-#define WOLFSSL_CERT_TEXT
+
+    #define WOLFSSL_CERT_TEXT
+
+    /* command-line options
+    --enable-keygen
+    --enable-certgen
+    --enable-certreq
+    --enable-certext
+    --enable-asn-template
+    */
+
+#endif
 
 #define WOLFSSL_ASN_TEMPLATE
 
@@ -256,11 +588,66 @@
 --enable-asn-template
 */
 
+/* optional SM4 Ciphers. See https://github.com/wolfSSL/wolfsm */
+/*
+#define WOLFSSL_SM2
+#define WOLFSSL_SM3
+#define WOLFSSL_SM4
+*/
+
+#if defined(WOLFSSL_SM2) || defined(WOLFSSL_SM3) || defined(WOLFSSL_SM4)
+    /* SM settings, possible cipher suites:
+
+        TLS13-AES128-GCM-SHA256
+        TLS13-CHACHA20-POLY1305-SHA256
+        TLS13-SM4-GCM-SM3
+        TLS13-SM4-CCM-SM3
+
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CBC-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3:" \
+                                       "TLS13-SM4-CCM-SM3:"
+    */
+
+    #undef  WOLFSSL_BASE16
+    #define WOLFSSL_BASE16 /* required for WOLFSSL_SM2 */
+
+    #undef  WOLFSSL_SM4_ECB
+    #define WOLFSSL_SM4_ECB
+
+    #undef  WOLFSSL_SM4_CBC
+    #define WOLFSSL_SM4_CBC
+
+    #undef  WOLFSSL_SM4_CTR
+    #define WOLFSSL_SM4_CTR
+
+    #undef  WOLFSSL_SM4_GCM
+    #define WOLFSSL_SM4_GCM
+
+    #undef  WOLFSSL_SM4_CCM
+    #define WOLFSSL_SM4_CCM
+
+    #define HAVE_POLY1305
+    #define HAVE_CHACHA
+
+    #undef  HAVE_AESGCM
+    #define HAVE_AESGCM
+#else
+    /* default settings */
+    #define USE_CERT_BUFFERS_2048
+#endif
+
 /* Chipset detection from sdkconfig.h
  * Default is HW enabled unless turned off.
  * Uncomment lines to force SW instead of HW acceleration */
-#if defined(CONFIG_IDF_TARGET_ESP32)
+#if defined(CONFIG_IDF_TARGET_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
     #define WOLFSSL_ESP32
+    /*  Alternatively, if there's an ECC Secure Element present: */
+    /* #define WOLFSSL_ESPWROOM32SE */
+
     /* wolfSSL HW Acceleration supported on ESP32. Uncomment to disable: */
     /*  #define NO_ESP32_CRYPT                 */
     /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
@@ -378,12 +765,16 @@
     #define WOLFSSL_ESP8266
 
     /* There's no hardware encryption on the ESP8266 */
-    /* Consider using the ESP32-C2/C3/C6
+    /* Consider using the ESP32-C2/C3/C6             */
-     * See https://www.espressif.com/en/products/socs/esp32-c2 */
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
     #define NO_WOLFSSL_ESP32_CRYPT_AES
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+    #ifndef FP_MAX_BITS
+        /* FP_MAX_BITS matters in wolfssl_test, not just TLS setting.   */
+        /* MIN_FFDHE_FP_MAX_BITS = (MIN_FFDHE_BITS * 2); see settings.h */
+        #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+    #endif
     /***** END CONFIG_IDF_TARGET_ESP266 *****/
 
 #elif defined(CONFIG_IDF_TARGET_ESP8684)
@@ -395,7 +786,7 @@
     /***** END CONFIG_IDF_TARGET_ESP8684 *****/
 
 #else
-    /* Anything else encountered, disable HW accleration */
+    /* Anything else encountered, disable HW acceleration */
     #warning "Unexpected CONFIG_IDF_TARGET_NN value"
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
@@ -403,29 +794,84 @@
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
 #endif /* CONFIG_IDF_TARGET Check */
 
+/* RSA primitive specific definition, listed AFTER the Chipset detection */
+#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
+    /* Consider USE_FAST_MATH and SMALL_STACK                        */
+
+    #ifndef NO_RSA
+        #define ESP32_USE_RSA_PRIMITIVE
+
+        #if defined(CONFIG_IDF_TARGET_ESP32)
+            #ifdef CONFIG_ESP_MAIN_TASK_STACK_SIZE
+                #if CONFIG_ESP_MAIN_TASK_STACK_SIZE < 10500
+                    #warning "RSA may be difficult with less than 10KB Stack "/
+                #endif
+            #endif
+
+            /* NOTE HW unreliable for small values! */
+            /* threshold for performance adjustment for HW primitive use   */
+            /* X bits of G^X mod P greater than                            */
+            #undef  ESP_RSA_EXPT_XBITS
+            #define ESP_RSA_EXPT_XBITS 32
+
+            /* X and Y of X * Y mod P greater than                         */
+            #undef  ESP_RSA_MULM_BITS
+            #define ESP_RSA_MULM_BITS  16
+        #endif
+    #endif
+#endif
+
 /* Debug options:
 See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
 
+optionally increase error message size for very long paths.
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+Turn wolfSSL debugging on/off:
+    wolfSSL_Debugging_ON();
+    wolfSSL_Debugging_OFF();
+
 #define ESP_VERIFY_MEMBLOCK
 #define DEBUG_WOLFSSL
 #define DEBUG_WOLFSSL_VERBOSE
 #define DEBUG_WOLFSSL_SHA_MUTEX
+#define WOLFSSL_DEBUG_IGNORE_ASN_TIME
+#define WOLFSSL_DEBUG_CERT_BUNDLE
+#define WOLFSSL_DEBUG_CERT_BUNDLE_NAME
 #define WOLFSSL_ESP32_CRYPT_DEBUG
 #define WOLFSSL_ESP32_CRYPT_HASH_SHA224_DEBUG
 #define NO_RECOVER_SOFTWARE_CALC
 #define WOLFSSL_TEST_STRAY 1
 #define USE_ESP_DPORT_ACCESS_READ_BUFFER
 #define WOLFSSL_ESP32_HW_LOCK_DEBUG
+#define WOLFSSL_DEBUG_MUTEX
 #define WOLFSSL_DEBUG_ESP_RSA_MULM_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
 #define ESP_DISABLE_HW_TASK_LOCK
+#define ESP_MONITOR_HW_TASK_LOCK
+#define USE_ESP_DPORT_ACCESS_READ_BUFFER
+
+See wolfcrypt/benchmark/benchmark.c for debug and other settings:
+
+Turn on benchmark timing debugging (CPU Cycles, RTOS ticks, etc)
+#define DEBUG_WOLFSSL_BENCHMARK_TIMING
+
+Turn on timer debugging (used when CPU cycles not available)
+#define WOLFSSL_BENCHMARK_TIMER_DEBUG
 */
 
-#define WOLFSSL_ESPIDF_ERROR_PAUSE /* Pause in a loop rather than exit. */
+/* Pause in a loop rather than exit. */
+/* #define WOLFSSL_ESPIDF_ERROR_PAUSE */
+/* #define WOLFSSL_ESP32_HW_LOCK_DEBUG */
+
 #define WOLFSSL_HW_METRICS
 
-/* #define HASH_SIZE_LIMIT */ /* for test.c */
+/* for test.c */
+/* #define HASH_SIZE_LIMIT */
 
-/* #define NO_HW_MATH_TEST */ /* Optionally turn off HW math checks */
+/* Optionally turn off HW math checks */
+/* #define NO_HW_MATH_TEST */
 
 /* Optionally include alternate HW test library: alt_hw_test.h */
 /* When enabling, the ./components/wolfssl/CMakeLists.txt file
@@ -466,6 +912,12 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
  * There are various certificate examples in this header file:
  * https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/certs_test.h
  *
+ * To use the sample certificates in code (not recommended for production!):
+ *
+ *    #if defined(USE_CERT_BUFFERS_2048) || defined(USE_CERT_BUFFERS_1024)
+ *        #include <wolfssl/certs_test.h>
+ *    #endif
+ *
  * To use the sets of macros below, define *one* of these:
  *
  *    USE_CERT_BUFFERS_1024  - ECC 1024 bit encoded ASN1
@@ -543,6 +995,9 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
     #define WOLFSSL_BASE16
 #else
     #if defined(USE_CERT_BUFFERS_2048)
+        #define USE_CERT_BUFFERS_256
+        /* Be sure to include in app when using example certs: */
+        /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_2048
         #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_2048
         #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1
@@ -562,6 +1017,9 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
         #define CTX_CLIENT_KEY_TYPE  WOLFSSL_FILETYPE_ASN1
 
     #elif defined(USE_CERT_BUFFERS_1024)
+        #define USE_CERT_BUFFERS_256
+        /* Be sure to include in app when using example certs: */
+        /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_1024
         #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_1024
         #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1
@@ -584,3 +1042,34 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
         #error "Must define USE_CERT_BUFFERS_2048 or USE_CERT_BUFFERS_1024"
     #endif
 #endif /* Conditional key and cert constant names */
+
+/******************************************************************************
+** Sanity Checks
+******************************************************************************/
+#if defined(CONFIG_ESP_MAIN_TASK_STACK_SIZE)
+    #if defined(WOLFCRYPT_HAVE_SRP)
+        #if defined(FP_MAX_BITS)
+            #if FP_MAX_BITS <  (8192 * 2)
+                #define ESP_SRP_MINIMUM_STACK_8K (24 * 1024)
+            #else
+                #define ESP_SRP_MINIMUM_STACK_8K (28 * 1024)
+            #endif
+        #else
+            #error "Please define FP_MAX_BITS when using WOLFCRYPT_HAVE_SRP."
+        #endif
+
+        #if (CONFIG_ESP_MAIN_TASK_STACK_SIZE < ESP_SRP_MINIMUM_STACK)
+            #warning "WOLFCRYPT_HAVE_SRP enabled with small stack size"
+        #endif
+    #endif
+#else
+    #warning "CONFIG_ESP_MAIN_TASK_STACK_SIZE not defined!"
+#endif
+/* See settings.h for some of the possible hardening options:
+ *
+ *  #define NO_ESPIDF_DEFAULT
+ *  #define WC_NO_CACHE_RESISTANT
+ *  #define WC_AES_BITSLICED
+ *  #define HAVE_AES_ECB
+ *  #define HAVE_AES_DIRECT
+ */

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/CMakeLists.txt

@@ -3,6 +3,7 @@
 #
 # wolfssl client test
 #
+message("Begin wolfSSL main CMakeLists.txt")
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
 
 if(WIN32)
@@ -83,24 +84,27 @@ function ( LIBWOLFSSL_SAVE_INFO VAR_OUPUT THIS_VAR VAR_RESULT )
         add_definitions(-D${VAR_OUPUT}=\"${VAR_VALUE}\")
     else()
         # if we get here, check the execute_process command and parameters.
-        message(STATUS "LIBWOLFSSL_SAVE_INFO encountered a non-zero VAR_RESULT")
+        message(STATUS "LIBWOLFSSL_SAVE_INFO encountered a non-zero VAR_RESULT.")
+        message(STATUS "Setting ${VAR_OUPUT} to \"Unknown\"")
         set(${VAR_OUPUT} "Unknown")
     endif()
 endfunction() # LIBWOLFSSL_SAVE_INFO
 
+# Save some project-specific details. Repo may be different than component, or may not even be a repo at all:
 if(NOT CMAKE_BUILD_EARLY_EXPANSION)
-    # LIBWOLFSSL_VERSION_GIT_HASH
+    # WOLFSSL_EXAMPLE_VERSION_GIT_HASH
     execute_process(COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
-    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
+    LIBWOLFSSL_SAVE_INFO(WOLFSSL_EXAMPLE_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
 
-    # LIBWOLFSSL_VERSION_GIT_SHORT_HASH
+    # WOLFSSL_EXAMPLE_VERSION_GIT_SHORT_HASH
     execute_process(COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
-    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
+    LIBWOLFSSL_SAVE_INFO(WOLFSSL_EXAMPLE_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
 
-    # LIBWOLFSSL_VERSION_GIT_HASH_DATE
+    # WOLFSSL_EXAMPLE_VERSION_GIT_HASH_DATE
     execute_process(COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
-    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
+    LIBWOLFSSL_SAVE_INFO(WOLFSSL_EXAMPLE_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
 endif()
 
 message(STATUS "")
+message("End wolfSSL main CMakeLists.txt")
 

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/Kconfig.projbuild

@@ -1,4 +1,83 @@
-menu "Example Configuration"
+menu "Example wolfSSL Configuration"
+
+choice WOLFSSL_EXAMPLE_CHOOSE
+    prompt "Choose Example (See wolfssl/include/user_settings.h)"
+    default WOLFSSL_EXAMPLE_NAME_NONE
+    help
+        The user settings file can be adjusted to specific wolfSSL examples.
+
+    config WOLFSSL_EXAMPLE_NAME_TEMPLATE
+        bool "wolfSSL Template"
+        help
+            The sample template app compiles in wolfSSL and prints the current wolfSSL Version. Nothing more.
+
+    config WOLFSSL_EXAMPLE_NAME_TEST
+        bool "wolfSSL Test"
+        help
+            This app tests all cryptographic functions currently enabled. See also Benchmark performance app.
+
+    config WOLFSSL_EXAMPLE_NAME_BENCHMARK
+        bool "wolfSSL Benchmark"
+        help
+            Benchmark performance app. See also cryptographic test.
+
+    config WOLFSSL_EXAMPLE_NAME_TLS_CLIENT
+        bool "TLS Client"
+        help
+            TLS Client Example app. Needs WiFi and a listening server on port 11111.
+
+    config WOLFSSL_EXAMPLE_NAME_TLS_SERVER
+        bool "TLS Server"
+        help
+            TLS Server Example app. Needs WiFi. More interesting with a TLS client using port 11111.
+
+    config WOLFSSL_EXAMPLE_NAME_WOLFSSH_TEMPLATE
+        bool "SSH Template App"
+        help
+            Bare-bones Hello World app that only compiles in wolfSSL and wolfSSH.
+            See wolfSSL/wolfssh on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER
+        bool "SSH Echo Server"
+        help
+            See wolfSSL/wolfssh on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER
+        bool "SSH Echo Server"
+        help
+            See wolfSSL/wolfssh on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_ESP32_SSH_SERVER
+        bool "SSH to UART Server for the ESP32"
+        help
+            See wolfSSL/wolfssh-examples on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_ESP8266_SSH_SERVER
+        bool "SSH to UART Server for the ESP8266"
+        help
+            See wolfSSL/wolfssh-examples on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_WOLFMQTT_TEMPLATE
+        bool "MQTT Template"
+        help
+            See wolfSSL/wolfmqtt on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_WOLFMQTT_AWS_IOT_MQTT
+        bool "MQTT AWS IoT"
+        help
+            See wolfSSL/wolfmqtt on GitHub.
+
+    config WOLFTPM_EXAMPLE_NAME_ESPRESSIF
+        bool "TPM Test Example for the ESP32"
+        help
+            See wolfSSL/wolfTPM on GitHub.
+
+    config WOLFSSL_EXAMPLE_NAME_NONE
+        bool "Other"
+        help
+            A specific example app is not defined.
+
+endchoice
 
 config WOLFSSL_TARGET_HOST
     string "Target host"

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/client-tls.c

@@ -18,6 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+
 #include "client-tls.h"
 
 /* Espressif FreeRTOS */
@@ -36,6 +37,8 @@
 
 /* wolfSSL */
 #include <wolfssl/wolfcrypt/settings.h>
+/* This project not yet using the library */
+#undef USE_WOLFSSL_ESP_SDK_WIFI
 #include <wolfssl/ssl.h>
 
 #if defined(WOLFSSL_WC_KYBER)
@@ -204,7 +207,6 @@ WOLFSSL_ESP_TASK tls_smp_client_task(void* args)
 
     size_t len;
 
-    wolfSSL_Debugging_ON();
     WOLFSSL_ENTER(TLS_SMP_CLIENT_TASK_NAME);
 
     doPeerCheck = 1;
@@ -238,8 +240,8 @@ WOLFSSL_ESP_TASK tls_smp_client_task(void* args)
     /* Create and initialize WOLFSSL_CTX */
     ctx = wolfSSL_CTX_new(wolfSSLv23_client_method()); /* SSL 3.0 - TLS 1.3. */
     /*   options:   */
-    /* ctx = wolfSSL_CTX_new(wolfTLSv1_2_client_method());      only TLS 1.2 */
+    /* ctx = wolfSSL_CTX_new(wolfSSLv1_2_client_method());      only TLS 1.2 */
-    /* ctx = wolfSSL_CTX_new(wolfTLSv1_3_client_method());      only TLS 1.3 */
+    /* ctx = wolfSSL_CTX_new(wolfSSLv1_3_client_method());      only TLS 1.3 */
     /* wolfSSL_CTX_NoTicketTLSv12(); */
     /* wolfSSL_NoTicketTLSv12();     */
     if (ctx == NULL) {
@@ -460,6 +462,9 @@ WOLFSSL_ESP_TASK tls_smp_client_task(void* args)
     }
 
     ESP_LOGI(TAG, "Connect to wolfSSL server...");
+    #ifdef DEBUG_WOLFSSL
+        wolfSSL_Debugging_ON();
+    #endif
     ret_i = wolfSSL_connect(ssl);
 #ifdef DEBUG_WOLFSSL
     this_heap = esp_get_free_heap_size();
@@ -570,7 +575,7 @@ WOLFSSL_ESP_TASK tls_smp_client_init(void* args)
 #else
     xTaskHandle _handle;
 #endif
-    /* See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/freertos_idf.html#functions  */
+    /* See Espressif api-reference/system/freertos_idf.html#functions  */
     if (TLS_SMP_CLIENT_TASK_BYTES < (6 * 1024)) {
         /* Observed approximately 6KB limit for the RTOS task stack size.
          * Reminder parameter is bytes, not words as with generic FreeRTOS. */
@@ -582,8 +587,7 @@ WOLFSSL_ESP_TASK tls_smp_client_init(void* args)
 #endif
 
     /* Note that despite vanilla FreeRTOS using WORDS for a parameter,
-     * Espressif uses BYTES for the task stack size here.
+     * Espressif uses BYTES for the task stack size here. */
-     * See https://docs.espressif.com/projects/esp-idf/en/v4.3/esp32/api-reference/system/freertos.html */
     ret = xTaskCreate(tls_smp_client_task,
                       TLS_SMP_CLIENT_TASK_NAME,
                       TLS_SMP_CLIENT_TASK_BYTES,

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/include/client-tls.h

@@ -29,9 +29,9 @@
 
 /* See main/Kconfig.projbuild for default configuration settings */
 #ifdef CONFIG_WOLFSSL_TARGET_HOST
-    #define TLS_SMP_TARGET_HOST         "192.168.1.36"
+    #define TLS_SMP_TARGET_HOST         CONFIG_WOLFSSL_TARGET_HOST
 #else
-    #define TLS_SMP_TARGET_HOST         "192.168.1.41"
+    #define TLS_SMP_TARGET_HOST         "192.168.1.37"
 #endif
 
 #ifdef CONFIG_WOLFSSL_TARGET_PORT
@@ -87,7 +87,7 @@ WOLFSSL_ESP_TASK tls_smp_client_task(void* args);
 
 /* init will create an RTOS task, otherwise server is simply function call. */
 #if defined(SINGLE_THREADED)
-    /* no init neded */
+    /* no init needed */
 #else
     WOLFSSL_ESP_TASK tls_smp_client_init(void* args);
 #endif

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/include/main.h

@@ -18,7 +18,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+
 #ifndef _MAIN_H_
 #define _MAIN_H_
 
+void app_main(void);
+
 #endif

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/include/time_helper.h

@@ -24,8 +24,8 @@
 #ifndef _TIME_HELPER_H_
 #define _TIME_HELPER_H_
 
-/* ESP-IDF uses a 64-bit signed integer to represent time_t starting from release v5.0
+/* ESP-IDF uses a 64-bit signed integer to represent time_t starting from
- * See: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/system_time.html#year-2036-and-2038-overflow-issues
+ * release v5.0 See Espressif api-reference/system/system_time
  */
 
 #ifdef __cplusplus

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/include/wifi_connect.h

@@ -103,23 +103,29 @@
     ** the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
     */
     #if defined(CONFIG_ESP_WIFI_SSID)
-        /* tyically from ESP32 with ESP-IDF v4 ot v5 */
+        /* tyically from ESP32 with ESP-IDF v4 to v5 */
         #define EXAMPLE_ESP_WIFI_SSID CONFIG_ESP_WIFI_SSID
     #elif defined(CONFIG_EXAMPLE_WIFI_SSID)
-        /* tyically from ESP8266 rtos-sdk/v3.4 */
+        /* typically from ESP8266 rtos-sdk/v3.4 */
         #define EXAMPLE_ESP_WIFI_SSID CONFIG_EXAMPLE_WIFI_SSID
     #else
-        #define EXAMPLE_ESP_WIFI_SSID "MYSSID_WIFI_CONNECT"
+        /* See new esp-sdk-lib.h helpers: */
+        #ifndef EXAMPLE_ESP_WIFI_SSID
+            #define EXAMPLE_ESP_WIFI_SSID "MYSSID_WIFI_CONNECT"
+        #endif
     #endif
 
     #if defined(CONFIG_ESP_WIFI_PASSWORD)
         /* tyically from ESP32 with ESP-IDF v4 or v5 */
         #define EXAMPLE_ESP_WIFI_PASS CONFIG_ESP_WIFI_PASSWORD
     #elif defined(CONFIG_EXAMPLE_WIFI_SSID)
-        /* tyically from ESP8266 rtos-sdk/v3.4 */
+        /* typically from ESP8266 rtos-sdk/v3.4 */
         #define EXAMPLE_ESP_WIFI_PASS CONFIG_EXAMPLE_WIFI_PASSWORD
     #else
-        #define EXAMPLE_ESP_WIFI_PASS "MYPASSWORD_WIFI_CONNECT"
+        /* See new esp-sdk-lib.h helpers: */
+        #ifndef EXAMPLE_ESP_WIFI_PASS
+            #define EXAMPLE_ESP_WIFI_PASS "MYPASSWORD_WIFI_CONNECT"
+        #endif
     #endif
 #endif
 

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/main.c

@@ -28,22 +28,32 @@
 
 /* wolfSSL */
 /* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
-/* Reminder: settings.h pulls in user_settings.h; don't include it here */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
-#include <wolfssl/wolfcrypt/settings.h>
+#ifdef WOLFSSL_USER_SETTINGS
-#include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+    #include <wolfssl/wolfcrypt/settings.h>
-#ifndef WOLFSSL_ESPIDF
+    #ifndef WOLFSSL_ESPIDF
-    #warning "Problem with wolfSSL user_settings."
+        #warning "Problem with wolfSSL user_settings."
-    #warning "Check components/wolfssl/include"
+        #warning "Check components/wolfssl/include"
+    #endif
+    /* This project not yet using the library */
+    #undef USE_WOLFSSL_ESP_SDK_WIFI
+    #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
 #endif
 
 /* this project */
 #include "client-tls.h"
 #include "time_helper.h"
 
-#ifndef CONFIG_IDF_TARGET_ESP32H2
+#ifdef CONFIG_IDF_TARGET_ESP32H2
     /* There's no WiFi on ESP32-H2.
      * For wired ethernet, see:
      * https://github.com/wolfSSL/wolfssl-examples/tree/master/ESP32/TLS13-ENC28J60-client */
+#else
     #include "wifi_connect.h"
     /*
      * Note ModBus TCP cannot be disabled on ESP8266 tos-sdk/v3.4
@@ -123,8 +133,12 @@ void my_atmel_free(int slotId)
 /* Entry for FreeRTOS */
 void app_main(void)
 {
+#if !defined(SINGLE_THREADED) && INCLUDE_uxTaskGetStackHighWaterMark
     int stack_start = 0;
+#endif
+#if !defined(SINGLE_THREADED)
     int this_heap = 0;
+#endif
     esp_err_t ret = 0;
     ESP_LOGI(TAG, "---------------- wolfSSL TLS Client Example ------------");
     ESP_LOGI(TAG, "--------------------------------------------------------");
@@ -132,6 +146,9 @@ void app_main(void)
     ESP_LOGI(TAG, "---------------------- BEGIN MAIN ----------------------");
     ESP_LOGI(TAG, "--------------------------------------------------------");
     ESP_LOGI(TAG, "--------------------------------------------------------");
+#if !defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_CLIENT)
+    ESP_LOGW(TAG, "Warning: Example wolfSSL misconfigured? Check menuconfig.");
+#endif
 #ifdef ESP_SDK_MEM_LIB_VERSION
     sdk_init_meminfo();
 #endif
@@ -155,7 +172,7 @@ void app_main(void)
          * the minimum free stack space there has been (in bytes not words, unlike
          * vanilla FreeRTOS) since the task started. The smaller the returned
          * number the closer the task has come to overflowing its stack.
-         * see https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/freertos_idf.html
+         * see Espressif api-reference/system/freertos_idf
          */
         stack_start = uxTaskGetStackHighWaterMark(NULL);
         #ifdef ESP_SDK_MEM_LIB_VERSION
@@ -172,7 +189,15 @@ void app_main(void)
 #ifdef HAVE_VERSION_EXTENDED_INFO
     esp_ShowExtendedSystemInfo();
 #endif
-
+#ifdef DEBUG_WOLFSSL
+    wolfSSL_Debugging_OFF();
+#endif
+#ifdef CONFIG_IDF_TARGET_ESP32H2
+    ESP_LOGE(TAG, "No WiFi on the ESP32-H2 and ethernet not yet supported");
+    while (1) {
+        vTaskDelay(60000);
+    }
+#endif
     /* Set time for cert validation.
      * Some lwIP APIs, including SNTP functions, are not thread safe. */
     ret = set_time(); /* need to setup NTP before WiFi */
@@ -267,7 +292,6 @@ void app_main(void)
                    - (uxTaskGetStackHighWaterMark(NULL))
             );
     ESP_LOGI(TAG, "Starting TLS Client task ...\n");
-
     ESP_LOGI(TAG, "main tls_smp_client_init heap @ %p = %d",
                   &this_heap, this_heap);
     tls_smp_client_init(args);

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/time_helper.c

@@ -19,12 +19,30 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
 
-/* See https://tf.nist.gov/tf-cgi/servers.cgi */
+/* common Espressif time_helper */
-
-/* common Espressif time_helper v5.6.6.001 */
-#include "sdkconfig.h"
 #include "time_helper.h"
 
+
+#include "sdkconfig.h"
+/* wolfSSL */
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
+#ifdef WOLFSSL_USER_SETTINGS
+    #include <wolfssl/wolfcrypt/settings.h>
+    #ifndef WOLFSSL_ESPIDF
+        #warning "Problem with wolfSSL user_settings."
+        #warning "Check components/wolfssl/include"
+    #endif
+    /* This project not yet using the library */
+    #undef USE_WOLFSSL_ESP_SDK_WIFI
+    #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
+#endif
+
 #include <esp_log.h>
 #include <esp_idf_version.h>
 
@@ -41,8 +59,8 @@
     /* TODO Consider non ESP-IDF environments */
 #endif
 
-/* ESP-IDF uses a 64-bit signed integer to represent time_t starting from release v5.0
+/* ESP-IDF uses a 64-bit signed integer to represent time_t starting from
- * See: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/system_time.html#year-2036-and-2038-overflow-issues
+ * release v5.0. See: Espressif api-reference/system/system_time
  */
 
 /* see https://www.gnu.org/software/libc/manual/html_node/TZ-Variable.html */
@@ -186,7 +204,7 @@ int set_time_from_string(const char* time_buffer)
     int quote_offset = 0;
     int ret = 0;
 
-    /* perform some basic sanity checkes */
+    /* perform some basic sanity checks */
     ret = probably_valid_time_string(time_buffer);
     if (ret == ESP_OK) {
         /* we are expecting the string to be encapsulated in single quotes */
@@ -200,7 +218,7 @@ int set_time_from_string(const char* time_buffer)
                     &day, &hour, &minute, &second, &year, &offset);
 
         if (ret == 8) {
-            /* we found a match for all componets */
+            /* we found a match for all components */
 
             const char *months[] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun",
                                      "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
@@ -264,7 +282,7 @@ int set_time(void)
     esp_show_current_datetime();
 
 #ifdef LIBWOLFSSL_VERSION_GIT_HASH_DATE
-    /* initialy set a default approximate time from recent git commit */
+    /* initially set a default approximate time from recent git commit */
     ESP_LOGI(TAG, "Found git hash date, attempting to set system date: %s",
                    LIBWOLFSSL_VERSION_GIT_HASH_DATE);
     set_time_from_string(LIBWOLFSSL_VERSION_GIT_HASH_DATE"\0");
@@ -285,7 +303,7 @@ int set_time(void)
     if (NTP_SERVER_COUNT) {
         /* next, let's setup NTP time servers
          *
-         * see https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/system_time.html#sntp-time-synchronization
+         * see Espressif api-reference/system/system_time
          *
          * WARNING: do not set operating mode while SNTP client is running!
          */

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/wifi_connect.c

@@ -31,12 +31,22 @@
 #include <esp_wifi.h>
 
 /* wolfSSL */
-#include <wolfssl/wolfcrypt/settings.h>
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
-#include <wolfssl/version.h>
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
-#include <wolfssl/wolfcrypt/types.h>
+#ifdef WOLFSSL_USER_SETTINGS
-#ifndef WOLFSSL_ESPIDF
+    #include <wolfssl/wolfcrypt/settings.h>
-    #warning "Problem with wolfSSL user_settings."
+    #ifndef WOLFSSL_ESPIDF
-    #warning "Check components/wolfssl/include"
+        #warning "Problem with wolfSSL user_settings."
+        #warning "Check components/wolfssl/include"
+    #endif
+    /* This project not yet using the library */
+    #undef USE_WOLFSSL_ESP_SDK_WIFI
+    #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
 #endif
 
 /* When there's too little heap, WiFi quietly refuses to connect */
@@ -137,7 +147,7 @@ int wifi_init_sta(void)
     };
 
     /* Setting a password implies station will connect to all security modes including WEP/WPA.
-        * However these modes are deprecated and not advisable to be used. Incase your Access point
+        * However these modes are deprecated and not advisable to be used. In case your Access point
         * doesn't support WPA2, these mode can be enabled by commenting below line */
 
     if (strlen((char *)wifi_config.sta.password)) {
@@ -198,7 +208,7 @@ static esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
         ESP_LOGI(TAG, "got ip:%s",
                  ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
     #endif
-        /* see https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/freertos_idf.html */
+        /* see Espressif api-reference/system/freertos_idf */
         xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
         break;
     case SYSTEM_EVENT_STA_DISCONNECTED:
@@ -315,7 +325,7 @@ int wifi_init_sta(void)
             .ssid = EXAMPLE_ESP_WIFI_SSID,
             .password = EXAMPLE_ESP_WIFI_PASS,
             /* Authmode threshold resets to WPA2 as default if password matches
-             * WPA2 standards (pasword len => 8). If you want to connect the
+             * WPA2 standards (password len => 8). If you want to connect the
              * device to deprecated WEP/WPA networks, Please set the threshold
              * value WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK and set the password with
              * length and format matching to WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK

IDE/Espressif/ESP-IDF/examples/wolfssl_client/sdkconfig.defaults

@@ -1,12 +1,21 @@
-# sdkconfig.defaults for ESP8266 + ESP32
+# Set the known example app config to TLS Client (see user_settings.h)
-# Note that during the build process, settings from sdkconfig.defaults will not override those already in sdkconfig.
+CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_CLIENT=y
-# See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html#custom-sdkconfig-defaults
+# CONFIG_EXAMPLE_WIFI_SSID="myssid"
-CONFIG_BENCH_ARGV="-lng 0"
+# CONFIG_EXAMPLE_WIFI_PASSWORD="mypassword"
+
+# Some wolfSSL helpers
+CONFIG_USE_WOLFSSL_ESP_SDK_TIME=y
+
+# FreeRTOS ticks at 1ms interval
+CONFIG_FREERTOS_UNICORE=y
 CONFIG_FREERTOS_HZ=1000
 CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
 
 #
-# Default main stack size. See user_settings.h
+# Default main stack size
+#
+# This is typically bigger than needed for stack size.
+# Units are words, not bytes. See user_settings.h
 #
 # For wolfSSL SMALL_STACK, 3072 bytes should be sufficient for benchmark app.
 # When using RSA, assign at least 10500 bytes, otherwise 5500 usually works for others
@@ -50,12 +59,43 @@ CONFIG_HEAP_DISABLE_IRAM=y
 # Performance
 # CONFIG_COMPILER_OPTIMIZATION_PERF=y
 
-# Set max COU frequency (falls back as needed for lower maximum)
+# Set max CPU frequency (falls back as needed for lower maximum)
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
 
-# FreeRTOS ticks at 1ms interval
+# Enable wolfSSL TLS in esp-tls
-CONFIG_FREERTOS_UNICORE=y
+CONFIG_ESP_TLS_USING_WOLFSSL=y
-CONFIG_FREERTOS_HZ=1000
+CONFIG_TLS_STACK_WOLFSSL=y
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=y
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=n
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+
+# Ensure mbedTLS options are disabled
+# CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=n
+# CONFIG_MBEDTLS_TLS_CLIENT_ONLY=n
+# CONFIG_MBEDTLS_TLS_SERVER=n
+# CONFIG_MBEDTLS_TLS_CLIENT=n
+# CONFIG_MBEDTLS_HARDWARE_AES=n
+# CONFIG_MBEDTLS_HARDWARE_MPI=n
+# CONFIG_MBEDTLS_HARDWARE_SHA=n
+# CONFIG_MBEDTLS_ROM_MD5=n
+# CONFIG_MBEDTLS_SSL_RENEGOTIATION=n
+# CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=n
+# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1=n
+# CONFIG_MBEDTLS_SSL_ALPN=n
+# CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=n
+# CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=n
+
+# The same-name config is used for both WiFi and client/server TLS, so we cannot disable:
+# CONFIG_MBEDTLS_TLS_ENABLED=n
+# CONFIG_MBEDTLS_TLS_DISABLED=y
 
 #
 # Compiler options

IDE/Espressif/ESP-IDF/examples/wolfssl_client/sdkconfig.defaults.esp32c2

@@ -0,0 +1,7 @@
+#
+# Main XTAL Config
+#
+CONFIG_XTAL_FREQ_26=y
+# CONFIG_XTAL_FREQ_40 is not set
+CONFIG_XTAL_FREQ=26
+# end of Main XTAL Config

IDE/Espressif/ESP-IDF/examples/wolfssl_client/sdkconfig.defaults.esp8266

@@ -0,0 +1,30 @@
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y
+
+# Enable wolfSSL TLS in esp-tls (not yet supported in RTOS SDK 3.4
+CONFIG_ESP_TLS_USING_WOLFSSL=n
+CONFIG_TLS_STACK_WOLFSSL=n
+
+# Bundles take up flash space and are disabled unless otherwise known to be needed
+CONFIG_WOLFSSL_CERTIFICATE_BUNDLE=n
+# CONFIG_ESP_WOLFSSL_SMALL_CERT_VERIFY=y
+# CONFIG_ESP_TLS_INSECURE=y
+
+# Disable mbedTLS
+CONFIG_ESP_TLS_USING_MBEDTLS=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
+
+# ESP8266 Memory
+CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
+CONFIG_HEAP_DISABLE_IRAM=y
+
+# ESP8266 Watchdog:
+CONFIG_TASK_WDT=n
+CONFIG_TASK_WDT_PANIC=n
+
+# ESP8266 WDT
+# CONFIG_ESP_PANIC_PRINT_REBOOT is not set
+CONFIG_ESP_PANIC_PRINT_REBOOT=n
+CONFIG_ESP_PANIC_PRINT_HALT=y

IDE/Espressif/ESP-IDF/examples/wolfssl_server/CMakeLists.txt

@@ -3,6 +3,8 @@
 #
 # The following lines of boilerplate have to be in your project's
 # CMakeLists in this exact order for cmake to work correctly
+message(STATUS "Begin project ${CMAKE_PROJECT_NAME}")
+
 cmake_minimum_required(VERSION 3.16)
 
 # The wolfSSL CMake file should be able to find the source code.
@@ -48,7 +50,8 @@ endif()
 # End optional WOLFSSL_CMAKE_SYSTEM_NAME
 
 # This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
-set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+# set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+string(REPLACE "\\" "/" PROTOCOL_EXAMPLES_DIR "$ENV{IDF_PATH}/examples/common_components/protocol_examples_common")
 
 if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
     message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
@@ -80,17 +83,20 @@ else()
 endif()
 
 
-# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+message(STATUS "begin include")
-set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+if(0)
+    # This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+    set (PROTOCOL_EXAMPLES_DIR $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
 
-if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
+    if (EXISTS "${PROTOCOL_EXAMPLES_DIR}")
-    message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+        message("Found PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
-    set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+        set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DFOUND_PROTOCOL_EXAMPLES_DIR")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DFOUND_PROTOCOL_EXAMPLES_DIR")
-else()
+    else()
-    message("NOT FOUND: PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+        message("NOT FOUND: PROTOCOL_EXAMPLES_DIR=${PROTOCOL_EXAMPLES_DIR}")
+    endif()
 endif()
-
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-
+message(STATUS "end include")
 project(wolfssl_server)
+message(STATUS "end project")

IDE/Espressif/ESP-IDF/examples/wolfssl_server/README.md

@@ -39,7 +39,7 @@ See the README.md file in the upper level 'examples' directory for more informat
 
 ```
 # . /mnt/c/SysGCC/esp32/esp-idf/master/export.sh
-. /mnt/c/SysGCC/esp32/esp-idf/v5.1/export.sh
+. /mnt/c/SysGCC/esp32/esp-idf/v5.2/export.sh
 cd /mnt/c/workspace/wolfssl-$USER/IDE/Espressif/ESP-IDF/examples/wolfssl_server
 
 # optionally erase
@@ -82,7 +82,7 @@ After the server exits, remove the port proxy forward:
 netsh interface portproxy delete v4tov4 listenport=11111 listenaddress=0.0.0.0
 ```
 
-Cipers to consider
+Ciphers to consider
 
 ```
 TLS13-AES128-GCM-SHA256:

IDE/Espressif/ESP-IDF/examples/wolfssl_server/README_server_sm.md

@@ -167,7 +167,7 @@ I (735) system_api: read default base MAC address from EFUSE
 I (755) wifi:wifi firmware version: 0d470ef
 I (755) wifi:wifi certification version: v7.0
 I (755) wifi:config NVS flash: enabled
-I (755) wifi:config nano formating: disabled
+I (755) wifi:config nano formatting: disabled
 I (755) wifi:Init data frame dynamic rx buffer num: 32
 I (765) wifi:Init management frame dynamic rx buffer num: 32
 I (765) wifi:Init management short buffer num: 32

IDE/Espressif/ESP-IDF/examples/wolfssl_server/components/wolfssl/CMakeLists.txt

@@ -19,16 +19,145 @@
 #
 # cmake for wolfssl Espressif projects
 #
-# Version 5.6.0.011 for detect test/benchmark
+# Version 5.7.2 Espressif ESP-IDF integration
 #
 # See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html
 #
-
+message(STATUS "Begin wolfssl ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
 cmake_minimum_required(VERSION 3.16)
+
+set(VERBOSE_COMPONENT_MESSAGES 1)
+
+# Optional requires include:
+# set(THIS_ESP_TLS "esp-tls")
+set(THIS_ESP_TLS "")
+
+# function: IS_ESP_IDF_COMPONENT
+#  output:    RESULT = 1 (true) if this component is located in the ESP-IDF components
+#             otherwise 0 (false)
+function( IS_ESP_IDF_COMPONENT  RESULT )
+    # NOTE: Component location is based on the location of the CMakeList.txt
+    # and *not* the location of the wolfSSL source code. (which may be anywhere)
+
+    # Normalize the paths to remove any trailing slashes
+    get_filename_component(NORMALIZED_IDF_PATH  "${IDF_PATH}"      REALPATH)
+    get_filename_component(NORMALIZED_TEST_PATH "${COMPONENT_DIR}" REALPATH)
+
+    # Check if the test path starts with the IDF_PATH
+    string(FIND "${NORMALIZED_TEST_PATH}" "${NORMALIZED_IDF_PATH}" pos)
+
+    if(${pos} EQUAL 0)
+        message(STATUS "${COMPONENT_DIR} is within IDF_PATH.")
+        set(${RESULT} 1 PARENT_SCOPE)
+    else()
+        message(STATUS "${COMPONENT_DIR} is not within IDF_PATH.")
+        set(${RESULT} 0 PARENT_SCOPE)
+    endif()
+endfunction()
+
+# Determine if this cmake file is located in the ESP-IDF component directory or not,
+# and if so, if it is being ignored (allowing the use of a local project one, instead).
+IS_ESP_IDF_COMPONENT( IS_WOLSSL_ESP_IDF_COMPONENT )
+if( IS_WOLSSL_ESP_IDF_COMPONENT )
+    message(STATUS "This wolfSSL is a component in ESP-IDF.")
+    if ( CONFIG_IGNORE_ESP_IDF_WOLFSSL_COMPONENT )
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component in ESP-IDF is being ignored.")
+        return()
+    endif()
+endif()
+
+
+if( "${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}" STREQUAL "" )
+    # nothing to do
+else()
+    # Only forward slashes, or double backslashes are supported.
+    # By the time we get here the sdkconfig file has a value for wolfSSL source code root.
+    string(REPLACE "\\" "/" CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
+    message(STATUS "Cleaned wolfssl path: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+endif()
+
+# The scope of this CMAKE_C_FLAGS is just this component:
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DWOLFSSL_USER_SETTINGS")
+
 set(CMAKE_CURRENT_SOURCE_DIR ".")
-set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
+# set(COMPONENT_REQUIRES lwip) # we typically don't need lwip directly in wolfssl component
-set(WOLFSSL_ROOT "$ENV{WOLFSSL_ROOT}" )
+
+# Optionally set your source to wolfSSL in your project CMakeLists.txt like this:
+# set(WOLFSSL_ROOT "c:/test/my_wolfssl" )
+
+if ( "${WOLFSSL_ROOT}" STREQUAL "")
+    set(WOLFSSL_ROOT "$ENV{WOLFSSL_ROOT}" )
+endif()
+
+if(  "$ENV{IDF_PATH}" STREQUAL "" )
+    message(FATAL_ERROR "IDF_PATH Environment variable not set!")
+else()
+    string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
+endif()
+
+# Optional compiler definitions to help with system name detection (typically printed by app diagnostics)
+if(VERBOSE_COMPONENT_MESSAGES)
+    if(WIN32)
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WINDOWS")
+        message("Detected Windows")
+    endif()
+    if(CMAKE_HOST_UNIX)
+        message("Detected UNIX")
+    endif()
+    if(APPLE)
+        message("Detected APPLE")
+    endif()
+    if(CMAKE_HOST_UNIX AND (NOT APPLE) AND EXISTS "/proc/sys/fs/binfmt_misc/WSLInterop")
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WSL")
+        message("Detected WSL")
+    endif()
+    if(CMAKE_HOST_UNIX AND (NOT APPLE) AND (NOT WIN32))
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_LINUX")
+        message("Detected Linux")
+    endif()
+    if(APPLE)
+        # Windows-specific configuration here
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_APPLE")
+        message("Detected Apple")
+    endif()
+endif() # End optional WOLFSSL_CMAKE_SYSTEM_NAME
+
+message(STATUS "CONFIG_TARGET_PLATFORM = ${CONFIG_TARGET_PLATFORM}")
+
+# Check that there are not conflicting wolfSSL components
+# The ESP Registry Component will be in ./managed_components/wolfssl__wolfssl
+# The local component wolfSSL directory will be in ./components/wolfssl
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" AND EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl" )
+    # These exclude statements don't seem to be honored by the $ENV{IDF_PATH}/tools/cmake/project.cmake'
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" EXCLUDE_FROM_ALL)
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl/include" EXCLUDE_FROM_ALL)
+    # So we'll error out and let the user decide how to proceed:
+    message(WARNING "\nFound wolfSSL components in\n"
+                    "./managed_components/wolfssl__wolfssl\n"
+                    "and\n"
+                    "./components/wolfssl\n"
+                    "in project directory: \n"
+                    "${CMAKE_HOME_DIRECTORY}")
+    message(FATAL_ERROR "\nPlease use either the ESP Registry Managed Component or the wolfSSL component directory but not both.\n"
+                        "If removing the ./managed_components/wolfssl__wolfssl directory, remember to also remove "
+                        "or rename the idf_component.yml file typically found in ./main/")
+else()
+    message(STATUS "No conflicting wolfSSL components found.")
+endif()
+
+
+# Don't include lwip requirement for benchmark and test apps.
+if( ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark") OR ("${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_test") )
+    message(STATUS "Not including lwip for ${CMAKE_PROJECT_NAME}")
+else()
+    # benchmark and test do not need wifi, everything else probably does:
+    set(COMPONENT_REQUIRES lwip "${THIS_ESP_TLS}") # we typically don't need lwip directly in wolfssl component
+endif()
 
 # find the user name to search for possible "wolfssl-username"
 message(STATUS "USERNAME = $ENV{USERNAME}")
@@ -51,6 +180,25 @@ else()
     string(REPLACE "\\" "/" THIS_IDF_PATH "$ENV{IDF_PATH}")
 endif()
 
+# ENVIRONMENT_VAR_TO_MACRO
+# Check environment variable name EVARPARAM as [name]
+# If defined, and has a value of EVARVALUE as [value],
+# then assign a compiler definition "-D[name]=[value]"
+function(ENVIRONMENT_VAR_TO_MACRO EVARPARAM EVARVALUE)
+    # If the EVARPARAM environment variable name is set to EVARVALUE,
+    # set the compiler flag definition to enable CSV output.
+    if ( "$ENV{${EVARPARAM}}" STREQUAL "${EVARVALUE}")
+        message(STATUS "Appending compile definition: -D${EVARPARAM}=${EVARVALUE}")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D${EVARPARAM}=${EVARVALUE}")
+    else()
+        if(DEFINED ENV{${EVARPARAM}})
+            message(STATUS "Environment variable ${EVARPARAM} detected but set to $ENV{${EVARPARAM}}, not appending compile definition.")
+        else()
+            message(STATUS "Environment variable ${EVARPARAM} not detected, not appending compile definition.")
+        endif()
+    endif()
+endfunction()
+
 # COMPONENT_NAME = wolfssl
 # The component name is the directory name. "No feature to change this".
 # See https://github.com/espressif/esp-idf/issues/8978#issuecomment-1129892685
@@ -68,7 +216,8 @@ endif()
 # function: IS_WOLFSSL_SOURCE
 #  parameter: DIRECTORY_PARAMETER - the directory to test
 #  output:    RESULT = contains contents of DIRECTORY_PARAMETER for wolfssl directory, otherwise blank.
-function(IS_WOLFSSL_SOURCE DIRECTORY_PARAMETER RESULT)
+function( IS_WOLFSSL_SOURCE  DIRECTORY_PARAMETER
+          RESULT )
     if (EXISTS "${DIRECTORY_PARAMETER}/wolfcrypt/src")
         set(${RESULT} "${DIRECTORY_PARAMETER}" PARENT_SCOPE)
     else()
@@ -76,27 +225,71 @@ function(IS_WOLFSSL_SOURCE DIRECTORY_PARAMETER RESULT)
     endif()
 endfunction()
 
+# *********************************************************************************************
 # function: FIND_WOLFSSL_DIRECTORY
 #  parameter: OUTPUT_FOUND_WOLFSSL_DIRECTORY contains root of source code, otherwise blank
 #
+# Example usage:
+#   FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+# *********************************************************************************************
 function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
-    message(STATUS "Starting FIND_WOLFSSL_DIRECTORY")
+    message(STATUS "Starting FIND_WOLFSSL_DIRECTORY: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
-    set(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}")
+
-    if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+    if ( "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}" STREQUAL "" )
-        message(STATUS "The WOLFSSL_ROOT environment variable is not set. Searching...")
+        # The parameter is empty, so we certainly need to search.
+        # First, see if there's an environment variable. This takes highest priority (unless already found as hard-coded, above)
+        set(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}")
+        if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+            message(STATUS "The WOLFSSL_ROOT environment variable is not set. Searching...")
+            # Next, if not found, see if wolfSSL was selected for ESP-TLS Kconfig
+            if(CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT)
+                set(CURRENT_SEARCH_DIR ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT})
+                get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
+                message(STATUS "WOLFSSL_ROOT found in sdkconfig/KConfig: ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+            else()
+                message(STATUS "wolfSSL not defined in [Component Config] [wolfssl]. Continuing search...")
+                # If not specified as a search hint in OUTPUT_FOUND_WOLFSSL_DIRECTORY:
+                # This wolfSSL component CMakeLists.txt may be found EITHER in:
+                #   1) local project component
+                #   2) ESP-IDF share components
+                # We'll start in the CMAKE_CURRENT_SOURCE_DIR, typically [something]/projectname/components/wolfssl
+                # That option might find wolfSSL source code as a copy in the component directory (e.g. Managed Components)
+                # Unless cmake is in the ESP-IDF, in which case it is unlikely to find wolfSSL source in any parent.
+                message(STATUS "CMAKE_CURRENT_SOURCE_DIR = ${CMAKE_CURRENT_SOURCE_DIR}")
+                get_filename_component(CURRENT_SEARCH_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ABSOLUTE)
+                message(STATUS "CURRENT_SEARCH_DIR = ${CURRENT_SEARCH_DIR}")
+                string(LENGTH ${CURRENT_SEARCH_DIR} CURRENT_SEARCH_DIR_LENGTH)
+            endif() # CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT
+        endif() # check environment var blank
     else()
-        get_filename_component(CURRENT_SEARCH_DIR "$ENV{WOLFSSL_ROOT}" ABSOLUTE)
+        message(STATUS "Parameter found for FIND_WOLFSSL_DIRECTORY")
+        message(STATUS "Setting wolfSSL search directory to: ${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+        set(CURRENT_SEARCH_DIR "${${OUTPUT_FOUND_WOLFSSL_DIRECTORY}}")
+    endif() # parameter empty
+
+    # Check to see if we found a path in environment or config settings, above.
+    if( "${CURRENT_SEARCH_DIR}" STREQUAL "" )
+        message(STATUS "Source for wolfSSL not specified in path nor config settings.")
+        # We'll continue the search by recursing up the directory tree, below.
+    else()
+        # Setting found! Does it contain a valid path?
+        string(REPLACE "\\" "/" CURRENT_SEARCH_DIR ${CURRENT_SEARCH_DIR})
+        get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" ABSOLUTE)
         IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR}" FOUND_WOLFSSL)
         if( FOUND_WOLFSSL )
-            message(STATUS "Found WOLFSSL_ROOT via Environment Variable: ${CURRENT_SEARCH_DIR}")
+            message(STATUS "Found wolfSSL source code via setting: ${CURRENT_SEARCH_DIR}")
             set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
             return()
         else()
-            message(FATAL_ERROR "WOLFSSL_ROOT Environment Variable defined, but path not found:")
+            if(WIN32)
-            message(STATUS "$ENV{WOLFSSL_ROOT}")
+                message(STATUS "When specifying a path for Windows, use forward slahes, or double backslashes.")
+            endif()
+            message(STATUS "CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT sdkconfig setting = ${CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT}")
+            message(STATUS "WOLFSSL_ROOT Variable defined, but source code not found: ${CURRENT_SEARCH_DIR}")
         endif()
     endif()
 
+
     # we'll start in the CMAKE_CURRENT_SOURCE_DIR, typically [something]/projectname/components/wolfssl
     message(STATUS "CMAKE_CURRENT_SOURCE_DIR = ${CMAKE_CURRENT_SOURCE_DIR}")
     get_filename_component(CURRENT_SEARCH_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ABSOLUTE)
@@ -114,16 +307,47 @@ function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
             return()
         endif()
 
+        # Maintain CURRENT_SEARCH_DIR, but check various suffixes with CURRENT_SEARCH_DIR_ALT
         if( THIS_USER )
             # Check for "wolfssl-[username]" subdirectory as we recurse up the directory tree
             set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl-${THIS_USER})
-            message(STATUS "Looking in ${CURRENT_SEARCH_DIR}")
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
 
-            #if(EXISTS ${CURRENT_SEARCH_DIR_ALT} AND IS_DIRECTORY ${CURRENT_SEARCH_DIR_ALT} AND EXISTS "${CURRENT_SEARCH_DIR_ALT}/wolfcrypt/src")
             IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
             if ( FOUND_WOLFSSL )
-               message(STATUS "Found wolfssl in user-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                message(STATUS "Found wolfssl in user-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
-                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR_ALT} PARENT_SCOPE)
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
+                return()
+            endif()
+        endif()
+
+        if ( FOUND_WOLFSSL )
+            # if we already found the source, skip attempt of "wolfssl-master"
+        else()
+            set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl-master)
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
+
+            IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
+            if ( FOUND_WOLFSSL )
+                message(STATUS "Found wolfssl in master-suffix CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
+                return()
+            endif()
+        endif()
+
+        if ( FOUND_WOLFSSL )
+            # if we already found the source, skip attempt of "wolfssl"
+        else()
+            set(CURRENT_SEARCH_DIR_ALT ${CURRENT_SEARCH_DIR}/wolfssl)
+            message(STATUS "Looking in ${CURRENT_SEARCH_DIR_ALT}")
+
+            IS_WOLFSSL_SOURCE("${CURRENT_SEARCH_DIR_ALT}" FOUND_WOLFSSL )
+            if ( FOUND_WOLFSSL )
+                message(STATUS "Found wolfssl in CURRENT_SEARCH_DIR_ALT = ${CURRENT_SEARCH_DIR_ALT}")
+                set(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR_ALT}")
+                set(${OUTPUT_FOUND_WOLFSSL_DIRECTORY} ${CURRENT_SEARCH_DIR} PARENT_SCOPE)
                 return()
             endif()
         endif()
@@ -143,7 +367,8 @@ function(FIND_WOLFSSL_DIRECTORY OUTPUT_FOUND_WOLFSSL_DIRECTORY)
         get_filename_component(CURRENT_SEARCH_DIR "${CURRENT_SEARCH_DIR}" DIRECTORY)
         message(STATUS "Next CURRENT_SEARCH_DIR = ${CURRENT_SEARCH_DIR}")
         if( "${PRIOR_SEARCH_DIR}" STREQUAL "${CURRENT_SEARCH_DIR}" )
-            # when the search directory is empty, we'll give up
+            # When the parent is current directory, cannot go any further. We didn't find wolfssl.
+            # When the search directory is empty, we'll give up.
             set(CURRENT_SEARCH_DIR "")
         endif()
     endwhile()
@@ -154,17 +379,58 @@ endfunction()
 
 
 # Example usage:
+#
+# Simply find the WOLFSSL_DIRECTORY by searching parent directories:
+#   FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+#
 
+message(STATUS "CONFIG_TARGET_PLATFORM = ${CONFIG_TARGET_PLATFORM}")
 
+# Check for environment variable that may be assigned to macros
+ENVIRONMENT_VAR_TO_MACRO("GENERATE_MACHINE_PARSEABLE_REPORT" "1")
+ENVIRONMENT_VAR_TO_MACRO("WOLFSSL_BENCHMARK_FIXED_CSV"       "1")
 
+# Optional variable inspection
+if (0)
+    get_cmake_property(_variableNames VARIABLES)
+    list (SORT _variableNames)
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES BEGIN")
+    message(STATUS "")
+    foreach (_variableName ${_variableNames})
+        message(STATUS "${_variableName}=${${_variableName}}")
+    endforeach()
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES END")
+    message(STATUS "")
+endif()
+
+if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+    # There's no esp_timer, no driver components for the ESP8266
+    message(STATUS "Early expansion EXCLUDES esp_timer for esp8266: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion EXCLUDES driver for esp8266: ${THIS_INCLUDE_DRIVER}")
+    set(THIS_INCLUDE_TIMER "")
+    set(THIS_INCLUDE_DRIVER "")
+    set(THIS_ESP_TLS "")
+else()
+    message(STATUS "Early expansion includes esp_timer: ${THIS_INCLUDE_TIMER}")
+    message(STATUS "Early expansion includes driver: ${THIS_INCLUDE_DRIVER}")
+    set(THIS_INCLUDE_TIMER "esp_timer")
+    set(THIS_INCLUDE_DRIVER "driver")
+    set(THIS_ESP_TLS "esp-tls")
+    # Let the app know that we've included the esp-tls component requirement.
+    # This is critical for use the the esp-tls component. See wolfssl esp_crt_bundle.c file.
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_REQUIRED_ESP_TLS=1")
+endif()
 
 if(CMAKE_BUILD_EARLY_EXPANSION)
     message(STATUS "wolfssl component CMAKE_BUILD_EARLY_EXPANSION:")
     idf_component_register(
                             REQUIRES "${COMPONENT_REQUIRES}"
                             PRIV_REQUIRES # esp_hw_support
-                                          # esp_timer
+                                          "${THIS_ESP_TLS}"
-                                          # driver # this will typically only be needed for wolfSSL benchmark
+                                          "${THIS_INCLUDE_TIMER}"
+                                          "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
                            )
 
 else()
@@ -173,48 +439,99 @@ else()
     message(STATUS "wolfssl component config:")
     message(STATUS "************************************************************************************************")
 
+    if ( "${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+        # There's no esp_timer, no driver components for the ESP8266
+        set(THIS_INCLUDE_TIMER "")
+        set(THIS_INCLUDE_DRIVER "")
+    else()
+        set(THIS_INCLUDE_TIMER "esp_timer")
+        set(THIS_INCLUDE_DRIVER "driver")
+    endif()
+
     # search for wolfSSL
     FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
     if(WOLFSSL_ROOT)
-        message(STATUS "NEW Found wolfssl directory at: ${WOLFSSL_ROOT}")
+        IS_WOLFSSL_SOURCE("${WOLFSSL_ROOT}" FOUND_WOLFSSL)
+        if(FOUND_WOLFSSL)
+            message(STATUS "Found WOLFSSL_ROOT via CMake specification.")
+        else()
+            # WOLFSSL_ROOT Path specified in CMakeLists.txt is not a valid path
+            message(FATAL_ERROR "WOLFSSL_ROOT CMake Variable defined, but path not found: ${WOLFSSL_ROOT}\n"
+                                "Try correcting WOLFSSL_ROOT in your project CMakeFile.txt or setting environment variable.")
+            # Abort CMake after fatal error.
+        endif()
     else()
-        message(STATUS "NEW wolfssl directory not found.")
+        message(STATUS "Source code for wolfSSL still not found.")
+        message(STATUS "Searching from project home: ${CMAKE_HOME_DIRECTORY} ...")
+        set(WOLFSSL_ROOT "${CMAKE_HOME_DIRECTORY}")
+        FIND_WOLFSSL_DIRECTORY(WOLFSSL_ROOT)
+    endif()
+
+
+    if(WOLFSSL_ROOT)
+        message(STATUS "Confirmed wolfssl directory at: ${WOLFSSL_ROOT}")
+    else()
+        # Try to allow a more intuitive error that the source code was not found in cmake:
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_WARNING_SOURCE_NOT_FOUND")
+
+        message(STATUS "Failed: wolfssl source code directory not found.")
         # Abort. We need wolfssl _somewhere_.
-        message(FATAL_ERROR "Could not find wolfssl in ${WOLFSSL_ROOT}.\n"
+        message(STATUS "")
-                            "Try setting WOLFSSL_ROOT environment variable or git clone.")
+        message(STATUS "")
+        message(STATUS "Could not find wolfssl in any parent directory named wolfssl-${THIS_USER}, wolfssl-master, or wolfssl.\n"
+                       "Try setting WOLFSSL_ROOT environment variable, cmake variable in project, copy source, or use managed components.")
+        message(STATUS "")
+        message(STATUS "")
+        # Abort CMake after fatal error. (or not?)
     endif()
 
     set(INCLUDE_PATH ${WOLFSSL_ROOT})
 
     set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/src/")
 
-    if( ${CMAKE_PROJECT_NAME} STREQUAL "wolfssl_benchmark" )
+    # During regression tests, optionally copy source locally and use: set(USE_LOCAL_TEST_BENCH 1)
-        set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+    set(USE_LOCAL_TEST_BENCH 0)
-    endif()
+    if(NOT USE_LOCAL_TEST_BENCH)
-
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "hello-world" )
-    if( ${CMAKE_PROJECT_NAME} STREQUAL "wolfssl_test" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/benchmark")
-        set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/test")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+        endif()
+
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_benchmark" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/benchmark")
+        endif()
+
+        if( "${CMAKE_PROJECT_NAME}" STREQUAL "wolfssl_test" )
+            message(STATUS "Include ${WOLFSSL_ROOT}/wolfcrypt/test")
+            set(WOLFSSL_EXTRA_PROJECT_DIR "${WOLFSSL_ROOT}/wolfcrypt/test")
+        endif()
     endif()
 
+    message(STATUS "WOLFSSL_EXTRA_PROJECT_DIR = ${WOLFSSL_EXTRA_PROJECT_DIR}")
     set(COMPONENT_SRCDIRS "\"${WOLFSSL_ROOT}/src/\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif\""
+                          "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle\""
                           "\"${WOLFSSL_ROOT}/wolfcrypt/src/port/atmel\""
                           "\"${WOLFSSL_EXTRA_PROJECT_DIR}\""
                          ) # COMPONENT_SRCDIRS
 
     message(STATUS "This COMPONENT_SRCDIRS = ${COMPONENT_SRCDIRS}")
 
+    # wolfSSL user_settings.h may be in the local project.
+    # TODO check if exists and possibly set to ESP-IDF
     set(WOLFSSL_PROJECT_DIR "${CMAKE_HOME_DIRECTORY}/components/wolfssl")
-    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${WOLFSSL_PROJECT_DIR}/include/user_settings.h")
-
 
+    string(REPLACE "/" "//" STR_WOLFSSL_PROJECT_DIR "${WOLFSSL_PROJECT_DIR}")
+    add_definitions(-DWOLFSSL_USER_SETTINGS_DIR="${STR_WOLFSSL_PROJECT_DIR}/include/user_settings.h")
+    message(STATUS "Added definition for user_settings.h: -DWOLFSSL_USER_SETTINGS_DIR=\"${STR_WOLFSSL_PROJECT_DIR}//include//user_settings.h\"")
     # Espressif may take several passes through this makefile. Check to see if we found IDF
     string(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "" WOLFSSL_FOUND_IDF)
 
     # get a list of all wolfcrypt assembly files; we'll exclude them as they don't target Xtensa
     file(GLOB EXCLUDE_ASM *.S)
-    file(GLOB_RECURSE EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
+    file(GLOB EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
 
     message(STATUS "IDF_PATH = $ENV{IDF_PATH}")
     message(STATUS "PROJECT_SOURCE_DIR = ${PROJECT_SOURCE_DIR}")
@@ -237,11 +554,12 @@ else()
         message(STATUS "Remove either the local project component: ${WOLFSSL_PROJECT_DIR} ")
         message(STATUS "or the Espressif shared component installed at: $ENV{IDF_PATH}/components/wolfssl/ ")
         message(STATUS "")
-        message(FATAL_ERROR "Please use wolfSSL in either local project or Espressif components, but not both.")
         message(STATUS "")
         message(STATUS "**************************************************************************************")
         message(STATUS "")
 
+        message(STATUS "Please use wolfSSL in either local project or Espressif components, but not both.")
+
         # Optional: if you change the above FATAL_ERROR to STATUS you can warn at runtime with this macro definition:
         set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
 
@@ -291,6 +609,7 @@ else()
                         message(FATAL_ERROR "Found stray wolfSSL user_settings.h in "
                                             "${WOLFSSL_ROOT}/include/user_settings.h "
                                             " (please move it to ${WOLFSSL_PROJECT_DIR}/include/user_settings.h )")
+                        # Abort CMake after fatal error.
                     else()
                         # we won't overwrite an existing user settings file, just note that we already have one:
                         if( EXISTS "${WOLFSSL_PROJECT_DIR}/include/user_settings.h" )
@@ -347,7 +666,9 @@ else()
     # depending on the environment, we may need to swap backslashes with forward slashes
     string(REPLACE "\\" "/" RTOS_IDF_PATH "$ENV{IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
 
-    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	if(WOLFSSL_ROOT)
+	    string(REPLACE "\\" "/" WOLFSSL_ROOT ${WOLFSSL_ROOT})
+	endif()
 
     if(IS_DIRECTORY "${RTOS_IDF_PATH}")
         message(STATUS "Found current RTOS path: ${RTOS_IDF_PATH}")
@@ -360,21 +681,22 @@ else()
             message(STATUS "Could not find RTOS path")
         endif()
     endif()
-
+    message(STATUS "THIS_IDF_PATH = $THIS_IDF_PATH")
-
+    # wolfSSL-specific include directories
     set(COMPONENT_ADD_INCLUDEDIRS
-        "./include" # this is the location of wolfssl user_settings.h
+        "./include" # this is the location of local project wolfssl user_settings.h
         "\"${WOLFSSL_ROOT}/\""
         "\"${WOLFSSL_ROOT}/wolfssl/\""
         "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/\""
+        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/port/Espressif\""
         "\"${RTOS_IDF_PATH}/\""
         # wolfSSL release after v5.7 includes WiFi, time, and mem/debug helpers
-        ${THIS_IDF_PATH}/components/esp_event/include
+        "${THIS_IDF_PATH}/components/esp_event/include"
-        ${THIS_IDF_PATH}/components/esp_netif/include
+        "${THIS_IDF_PATH}/components/esp_netif/include"
-        ${THIS_IDF_PATH}/components/esp_wifi/include
+        "${THIS_IDF_PATH}/components/esp_wifi/include"
         )
 
-
+    # Optionally include cryptoauthlib if present
     if(IS_DIRECTORY ${IDF_PATH}/components/cryptoauthlib)
         list(APPEND COMPONENT_ADD_INCLUDEDIRS "../cryptoauthlib/lib")
     endif()
@@ -383,7 +705,7 @@ else()
     list(APPEND COMPONENT_ADD_INCLUDEDIRS "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/\"")
 
 
-
+    # Some files are known to be included elsewhere, or not used for Espressif
     set(COMPONENT_SRCEXCLUDE
         "\"${WOLFSSL_ROOT}/src/bio.c\""
         "\"${WOLFSSL_ROOT}/src/conf.c\""
@@ -399,8 +721,8 @@ else()
         "\"${WOLFSSL_ROOT}/src/ssl_sess.c\""    # included by ssl.c
         "\"${WOLFSSL_ROOT}/src/x509.c\""
         "\"${WOLFSSL_ROOT}/src/x509_str.c\""
-        "\"${WOLFSSL_ROOT}/wolfcrypt/src/ext_kyber.c\""     # external Kyber disabled by default
+        "\"${WOLFSSL_ROOT}/wolfcrypt/src/ext_kyber.c\""     # external non-wolfssl Kyber disabled by default
-        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/ext_kyber.h\"" # external Kyber disabled by default
+        "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt/ext_kyber.h\"" # external non-wolfssl Kyber disabled by default
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/evp.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/misc.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_arm32.c\""
@@ -411,6 +733,7 @@ else()
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_cortexm.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64.c\""
         "\"${WOLFSSL_ROOT}/wolfcrypt/src/sp_sm2_x86_64_asm.S\""
+        "\"${WOLFSSL_ROOT}/examples\"" # Examples are distributed in Managed Components, but not part of a project.
         "\"${EXCLUDE_ASM}\""
         )
 
@@ -432,22 +755,144 @@ else()
     # see https://docs.espressif.com/projects/esp-idf/en/stable/esp32/migration-guides/release-5.x/build-system.html?highlight=space%20path
     #
     set(EXTRA_COMPONENT_DIRS "${COMPONENT_SRCDIRS}")
-    idf_component_register(
+
-                            SRC_DIRS "${COMPONENT_SRCDIRS}"
+    if(WOLFSSL_ROOT)
-                            INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
+        # Only register the component if we found wolfSSL source.
-                            REQUIRES "${COMPONENT_REQUIRES}"
+        # This is important to allow Cmake to finish to completion, otherwise the UI
-                            EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+        # may not be able to display the Kconfig settings to fix a bad or missing source.
-                            PRIV_REQUIRES esp_timer driver # this will typically only be needed for wolfSSL benchmark
+        idf_component_register(
-                           )
+                                SRC_DIRS "${COMPONENT_SRCDIRS}"
-    # some optional diagnostics
+                                INCLUDE_DIRS "${COMPONENT_ADD_INCLUDEDIRS}"
-    if (1)
+                                REQUIRES "${COMPONENT_REQUIRES}"
+                                EXCLUDE_SRCS "${COMPONENT_SRCEXCLUDE}"
+                                PRIV_REQUIRES
+                                  "${THIS_ESP_TLS}"
+                                  "${THIS_INCLUDE_TIMER}"
+                                  "${THIS_INCLUDE_DRIVER}" # this will typically only be needed for wolfSSL benchmark
+                               )
+    else()
+        # Register the component simply to allow CMake to complete, but there's no wolfSSL source.
+        # Expect many other errors, but the project should at least be loadable and UI can edit Kconfig settings.
+        idf_component_register()
+        message(STATUS "Warning: wolfSSL component not registered as no source code found (WOLFSSL_ROOT is blank)")
+    endif()
+
+# function(WOLFSSL_INIT_CERT_BUNDLE)
+if( CONFIG_WOLFSSL_CERTIFICATE_BUNDLE
+    AND NOT CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+    AND NOT ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266")
+  )
+    if (CMAKE_BUILD_EARLY_EXPANSION)
+        message(ERROR "Bundle Cert initialization must occur during CMAKE_BUILD_EARLY_EXPANSION")
+    endif()
+    # reminder: we need a value for wolfSSL root first!
+    if( "${WOLFSSL_ROOT}" STREQUAL "" )
+        message(ERROR "Certificate bundles need a value for WOLFSSL_ROOT")
+    endif()
+    set(WOLFSSL_ESP_CRT_BUNDLE_DIR ${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/esp_crt_bundle)
+    message(STATUS "WOLFSSL_ESP_CRT_BUNDLE_DIR=${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    if(EXISTS "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+        set(bundle_name "x509_crt_bundle_wolfssl")
+
+        # For now the certs are in the same directory
+        set(DEFAULT_CRT_DIR "${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+
+        # Generate custom certificate bundle using the generate_cert_bundle utility
+        set(GENERATE_CERT_BUNDLEPY ${python} ${WOLFSSL_ESP_CRT_BUNDLE_DIR}/gen_crt_bundle.py)
+
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+        elseif(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_all.pem ${DEFAULT_CRT_DIR}/cacrt_local.pem)
+            list(APPEND args --filter ${DEFAULT_CRT_DIR}/cmn_crt_authorities.csv)
+        endif()
+
+        # Add deprecated root certs if enabled. This config is not visible if the default cert
+        # bundle is not selected
+        if(CONFIG_WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST)
+            list(APPEND crt_paths ${DEFAULT_CRT_DIR}/cacrt_deprecated.pem)
+        endif()
+
+        if(CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE)
+            get_filename_component(custom_bundle_path
+              ${CONFIG_WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH} ABSOLUTE BASE_DIR "${project_dir}")
+            list(APPEND crt_paths ${custom_bundle_path})
+            message(STATUS "Using a custom wolfSSL bundle path: ${custom_bundle_path}")
+        else()
+            message(STATUS "Not using a custom wolfSSL bundle path.")
+        endif()
+        list(APPEND args --input ${crt_paths} -q)
+
+        message(STATUS "CMAKE_CURRENT_BINARY_DIR: ${CMAKE_CURRENT_BINARY_DIR}")
+        get_filename_component(crt_bundle
+            ${bundle_name}
+            ABSOLUTE BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}")
+
+        message(STATUS "Setting up bundle generate: ${GENERATE_CERT_BUNDLEPY} ${args}")
+        message(STATUS "Depends on custom bundle path: ${custom_bundle_path}")
+        message(STATUS "crt_bundle ${crt_bundle}")
+        message(STATUS "COMPONENT_LIB ${COMPONENT_LIB}")
+        message(STATUS "GENERATE_CERT_BUNDLEPY ${GENERATE_CERT_BUNDLEPY}")
+        message(STATUS "args ${args}")
+        message(STATUS "cert_bundle ${cert_bundle}")
+
+        # Generate bundle according to config
+        # File is generated at build time, not cmake load
+        add_custom_command(OUTPUT ${crt_bundle}
+            COMMAND ${GENERATE_CERT_BUNDLEPY} ARGS ${args}
+            DEPENDS ${custom_bundle_path}
+            VERBATIM)
+
+        if(EXISTS "${crt_bundle}")
+            message(STATUS "Bundle file exists from prior build: ${crt_bundle}")
+        else()
+            message(STATUS "Bundle file expected during next build: ${crt_bundle}")
+        endif()
+
+        # Reminder the file is generated at build time, not cmake load time.
+        message(STATUS "wolfSSL Cert Bundle File to be created at build time in: ${crt_bundle}")
+
+        add_custom_target(custom_wolfssl_bundle DEPENDS ${cert_bundle})
+
+        # the wolfSSL crtificate bundle is baked into wolfSSL
+        add_dependencies(${COMPONENT_LIB} custom_wolfssl_bundle)
+
+        # COMPONENT_LIB may vary: __idf_wolfssl, __idf_esp_wolfssl, etc
+        # target_add_binary_data(__idf_wolfssl ${crt_bundle} BINARY)
+        target_add_binary_data(${COMPONENT_LIB} ${crt_bundle} BINARY)
+        set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+                     APPEND PROPERTY ADDITIONAL_CLEAN_FILES
+                     "${crt_bundle}")
+    else()
+        message(STATUS "WARNING: CONFIG_WOLFSSL_CERTIFICATE_BUNDLE enabled but directory not found: ${WOLFSSL_ESP_CRT_BUNDLE_DIR}")
+    endif()
+endif()
+
+# endfunction() # WOLFSSL_INIT_CERT_BUNDLE
+
+    # Some optional diagnostics. Verbose ones are truncated.
+    if (VERBOSE_COMPONENT_MESSAGES)
         get_cmake_property(_variableNames VARIABLES)
         list (SORT _variableNames)
         message(STATUS "")
         message(STATUS "ALL VARIABLES BEGIN")
         message(STATUS "")
         foreach (_variableName ${_variableNames})
-            message(STATUS "${_variableName}=${${_variableName}}")
+            if (      ("${_variableName}" STREQUAL "bootloader_binary_files")
+                    OR ("${_variableName}" STREQUAL "Component paths")
+                    OR ("${_variableName}" STREQUAL "component_targets")
+                    OR ("${_variableName}" STREQUAL "__COMPONENT_TARGETS")
+                    OR ("${_variableName}" STREQUAL "CONFIGS_LIST")
+                    OR ("${_variableName}" STREQUAL "__CONFIG_VARIABLES")
+                    OR ("${_variableName}" STREQUAL "val")
+                    OR ("${_variableName}" MATCHES "^__idf_")
+               )
+                # Truncate the displayed value:
+                string(SUBSTRING "${${_variableName}}" 0 70 truncatedValue)
+                message(STATUS "${_variableName} = ${truncatedValue} ... (truncated)")
+            else()
+                message(STATUS "${_variableName}=${${_variableName}}")
+            endif()
         endforeach()
         message(STATUS "")
         message(STATUS "ALL VARIABLES END")
@@ -455,6 +900,12 @@ else()
     endif()
 
     # target_sources(wolfssl PRIVATE  "\"${WOLFSSL_ROOT}/wolfssl/\""  "\"${WOLFSSL_ROOT}/wolfssl/wolfcrypt\"")
+    message(STATUS "DETECTED_PROJECT_NAME=${CMAKE_PROJECT_NAME}")
+    message(STATUS "COMPONENT_TARGET=${COMPONENT_TARGET}")
+    target_compile_definitions(${COMPONENT_TARGET} PRIVATE DETECTED_PROJECT_NAME="${CMAKE_PROJECT_NAME}")
+    if( "${CMAKE_PROJECT_NAME}" STREQUAL "esp_http_client_example" )
+        target_compile_definitions(${COMPONENT_TARGET} PRIVATE APP_ESP_HTTP_CLIENT_EXAMPLE="y")
+    endif()
 
 endif() # CMAKE_BUILD_EARLY_EXPANSION
 
@@ -510,31 +961,80 @@ endfunction() # LIBWOLFSSL_SAVE_INFO
 
 # create some programmatic #define values that will be used by ShowExtendedSystemInfo().
 # see wolfcrypt\src\port\Espressif\esp32_utl.c
-if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+if(NOT CMAKE_BUILD_EARLY_EXPANSION AND WOLFSSL_ROOT)
     set (git_cmd "git")
     message(STATUS "Adding macro definitions:")
 
     # LIBWOLFSSL_VERSION_GIT_ORIGIN: git config --get remote.origin.url
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "config" "--get" "remote.origin.url"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_ORIGIN "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_BRANCH: git rev-parse --abbrev-ref HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--abbrev-ref" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_BRANCH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH: git rev-parse HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_SHORT_HASH: git rev-parse --short HEAD
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "rev-parse" "--short" "HEAD"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
 
     # LIBWOLFSSL_VERSION_GIT_HASH_DATE git show --no-patch --no-notes --pretty=\'\%cd\'
-    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
+    execute_process(WORKING_DIRECTORY ${WOLFSSL_ROOT} COMMAND ${git_cmd}
+                    "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'"
+                    OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
     LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
 
-    message(STATUS "************************************************************************************************")
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_WOLFSSL_ROOT "${WOLFSSL_ROOT}" "${TMP_RES}")
-    message(STATUS "wolfssl component config complete!")
+
-    message(STATUS "************************************************************************************************")
 endif()
+
+# Ensure flag "-DWOLFSSL_ESPIDF" is already in CMAKE_C_FLAGS if not yet found from project
+string(FIND "${CMAKE_C_FLAGS}" "-DWOLFSSL_ESPIDF" FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF)
+
+if(FLAG_ALRREADY_FOUND_WOLFSSL_ESPIDF EQUAL -1)
+    # Flag not found, append it
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_ESPIDF")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+endif()
+
+if(WOLFSSL_ROOT)
+    message(STATUS "Using wolfSSL in ${WOLFSSL_ROOT}")
+
+    # PlatformIO does not process script from from the Espressif cmake process.
+    # We need to know where wolfSSL source code was found, so save it in the
+    # PIO_WOLFSSL_ROOT environment variable to later be read by extra_script.py
+
+    set(ENV{PIO_WOLFSSL_ROOT} "${WOLFSSL_ROOT}")
+    message(STATUS "PIO_WOLFSSL_ROOT =  $ENV{PIO_WOLFSSL_ROOT}")
+    message(STATUS "PLATFORMIO_BUILD_DIR = $ENV{PLATFORMIO_BUILD_DIR}")
+    # See esp-tls Kconfig; menu "ESP-TLS", ESP_TLS_LIBRARY_CHOOSE
+    if(CONFIG_ESP_TLS_USING_WOLFSSL)
+        if ( ("${CONFIG_TARGET_PLATFORM}" STREQUAL "esp8266") OR ("${IDF_TARGET}" STREQUAL "esp8266") )
+            message(STATUS "This version of wolfSSL is not supported on the ESP8266 esp-tls at this time. Check ESP-TLS config")
+        else()
+            message(STATUS "wolfSSL will be used for ESP-TLS")
+        endif()
+    else()
+        message(STATUS "WARNING: wolfSSL NOT selected for ESP-TLS. Features and performance will be limited.")
+    endif()
+else()
+    message(STATUS "")
+    message(STATUS "Consider setting WOLFSSL_ROOT environment variable, use Kconfig setting, or set manually in this cmake file, above.")
+    message(STATUS "")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "ERROR: Could not find wolfSSL Source Code")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+    message(STATUS "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
+endif()
+
+message(STATUS "************************************************************************************************")
+message(STATUS "wolfSSL component config complete!")
+message(STATUS "************************************************************************************************")

IDE/Espressif/ESP-IDF/examples/wolfssl_server/components/wolfssl/Kconfig

@@ -0,0 +1,523 @@
+# Kconfig template
+#
+# Copyright (C) 2006-2024 wolfSSL Inc.  All rights reserved.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+
+# Kconfig File Version 5.7.2.001 for esp-idf integration
+
+# Kconfig Format Rules
+#
+# See:
+#  https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/kconfig.html
+#
+# Format rules for Kconfig files are as follows:
+#
+# Option names in any menus should have consistent prefixes. The prefix
+# currently should have at least 3 characters.
+#
+# The unit of indentation should be 4 spaces. All sub-items belonging to a
+# parent item are indented by one level deeper. For example, menu is indented
+# by 0 spaces, config menu by 4 spaces, help in config by 8 spaces, and the
+# text under help by 12 spaces.
+#
+# No trailing spaces are allowed at the end of the lines.
+#
+# The maximum length of options is NOT 50 characters as documented.
+#   kconfcheck will complain that options should be 40 at most.
+#
+# Fix option lengths first. Superfluous errors on other lines may occur.
+#
+# The maximum length of lines is 120 characters.
+#
+# python -m kconfcheck <path_to_kconfig_file>
+#
+# ---------------------------------------------------------------------------------------------------------------------
+# Begin main wolfSSL configuration menu
+# ---------------------------------------------------------------------------------------------------------------------
+#   See ESP-IDF esp-tls component for config TLS_STACK_WOLFSSL
+
+menu "wolfSSL"
+
+    menu "Hardening"
+        config ESP_WOLFSSL_WC_NO_HARDEN
+            bool "Disable wolfSSL hardening"
+            default n
+            help
+                Sets WC_NO_HARDEN
+
+        config ESP_WOLFSSL_TFM_TIMING_RESISTANT
+            bool "Enable TFM Timing Resistant Code"
+            default n
+            help
+                Sets TFM_TIMING_RESISTANT.
+
+    endmenu # Hardening
+
+    config ESP_WOLFSSL_ENABLE_BENCHMARK
+        bool "Enable wolfSSL Benchmark Library"
+        default n
+        help
+            Enables wolfcrypt/benchmark/benchmark.c code for benchmark metrics. Disables NO_CRYPT_BENCHMARK.
+
+
+    menu "Benchmark Debug"
+        config ESP_DEBUG_WOLFSSL_BENCHMARK_TIMING
+            bool "Enable benchmark timing debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Enable wolfssl debug for benchmark metric timing (CPU Cycles, RTOS ticks, etc).
+
+        config ESP_WOLFSSL_BENCHMARK_TIMER_DEBUG
+            bool "Enable benchmark timer debug"
+            depends on ESP_WOLFSSL_ENABLE_BENCHMARK
+            default n
+            help
+                Turn on timer debugging (used when CPU cycles not available)
+
+    endmenu # Benchmark Debug
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # wolfCrypt Test
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ENABLE_TEST
+        bool "Enable wolfCrypt Test Library"
+        default n
+        help
+            Enables wolfcrypt/test/test.c code for testing. Disables NO_CRYPT_TEST.
+
+    menu "wolfCrypt tests"
+        config WOLFSSL_HAVE_WOLFCRYPT_TEST_OPTIONS
+            bool "Enable wolfCrypt Test Options"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables HAVE_WOLFCRYPT_TEST_OPTIONS
+
+        config TEST_ESPIDF_ALL_WOLFSSL
+            bool "Enable all features to use in tests"
+            depends on ESP_WOLFSSL_ENABLE_TEST
+            default n
+            help
+                Enables TEST_ESPIDF_ALL_WOLFSSL
+
+    endmenu # wolfCrypt tests
+
+    # -----------------------------------------------------------------------------------------------------------------
+    # Apple HomeKit Options
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Apple HomeKit"
+        config WOLFSSL_APPLE_HOMEKIT
+            bool "Enable Apple HomeKit options"
+            default n
+            help
+                Enables FP_MAX_BITS (8192 * 2), SRP, ChaCha, Poly1305, Base64 encoding needed for Apple HomeKit.
+    endmenu # Apple HomeKit
+    # -----------------------------------------------------------------------------------------------------------------
+
+    config ESP_WOLFSSL_DISABLE_MY_ECC
+        bool "Disable ECC in my project"
+        default "n"
+        help
+            ECC is enabled by default. Select this option to disable.
+
+    config ESP_WOLFSSL_ENABLE_MY_USE_RSA
+        bool "Enable RSA in my project"
+        default "n"
+        help
+            RSA is disabled by default. Select this option to enable.
+
+    config ESP_WOLFSSL_BENCHMARK
+        bool "Enable wolfSSL Benchmark"
+        default n
+        help
+            Enables user settings relevant to benchmark code
+
+    config ESP_TLS_USING_WOLFSSL_SPECIFIED
+        bool "Use the specified wolfssl for ESP-TLS"
+        default Y
+        help
+            Includes wolfSSL from specified directory (not using esp-wolfssl).
+
+    config ESP_WOLFSSL_NO_USE_FAST_MATH
+        bool "Disable FAST_MATH library and all ESP32 Hardware Acceleration"
+        select ESP_WOLFSSL_NO_HW
+        select ESP_WOLFSSL_NO_HW_AES
+        select ESP_WOLFSSL_NO_HW_HASH
+        select ESP_WOLFSSL_NO_HW_RSA_PRI
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+        select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+
+    menu "Protocol Config"
+        config WOLFSSL_HAVE_ALPN
+            bool "Enable ALPN (Application Layer Protocol Negotiation) in wolfSSL"
+            default y
+
+        config WOLFSSL_ALLOW_TLS13
+            bool "Allow TLS 1.3"
+            default y
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_ALLOW_TLS12
+            bool "Allow TLS 1.2"
+            default n
+            help
+                Allow TLS to fallback to TLS1.2. Memory footprint will likely be larger for TLS1.2.
+                When disabled HTTPS and MQTT over TLS connections will fail if TLS1.3 not accepted.
+
+        config WOLFSSL_HAVE_TLS_EXTENSIONS
+            bool "Enable TLS Extensions"
+            default y
+            help
+                Sets HAVE_TLS_EXTENSIONS which is needed for TLS 1.3, SNI, ALPN, and more.
+
+        config WOLFSSL_ALT_CERT_CHAINS
+            bool "Enable Alternate Certificate Chains"
+            default n
+            help
+                The option relaxes the default strict wolfSSL certificate chain processing. This
+                will typically need to be enabled when loading only a CA file. Typically solves
+                the -188 ASN_NO_SIGNER_E error. Use with caution.
+
+        config WOLFSSL_HAVE_OCSP
+            bool "Enable OCSP (Online Certificate Status Protocol) in wolfSSL"
+            default n
+            help
+                Sets HAVE_OCSP
+
+    endmenu # Protocol Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config TLS_STACK_WOLFSSL
+        # Invisible option that locks TLS_STACK_WOLFSSL to ESP_TLS_USING_WOLFSSL
+        bool
+        default n
+        select FREERTOS_ENABLE_BACKWARD_COMPATIBILITY
+        help
+            Includes wolfSSL in ESP-TLS so that it can be compiled with wolfSSL as its SSL/TLS library.
+            Enabled when wolfSSL is selected in ESP_TLS_LIBRARY_CHOOSE.
+
+    menu "wolfSSL ESP-TLS"
+        depends on ESP_TLS_USING_WOLFSSL
+
+        menu "Certificate Bundle"
+            depends on ESP_TLS_USING_WOLFSSL
+
+            config WOLFSSL_CERTIFICATE_BUNDLE
+                bool "Enable trusted root certificate bundle"
+                default y if ESP_TLS_USING_WOLFSSL
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Enable support for large number of default root certificates
+
+                    When enabled this option allows user to store default as well
+                    as customer specific root certificates in compressed format rather
+                    than storing full certificate. For the root certificates the public key and the subject name
+                    will be stored.
+
+            config WOLFSSL_NO_ASN_STRICT
+                bool "Relax Certificate ASN Strict Checks"
+                default n
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Allows sub-optimal certificate ASN checks. Unless using a bundle with known issues,
+                    it is recommended to NOT enable this.
+
+            config WOLFSSL_ASN_ALLOW_0_SERIAL
+                bool "Allow cert missing an ASN Serial Number"
+                default y
+                depends on ESP_TLS_USING_WOLFSSL
+                help
+                    Although not recommended, there may be certificates in the bundle that are missing
+                    a serial number. This option allows the missing value without having to fully
+                    disable strict ASN checking with WOLFSSL_NO_ASN_STRICT.
+
+            choice WOLFSSL_DEFAULT_CERTIFICATE_BUNDLE
+                bool "Default certificate bundle options"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_FULL
+                    bool "Use the full default certificate bundle"
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_CMN
+                    bool "Use only the most common certificates from the default bundles"
+                    help
+                        Use only the most common certificates from the default bundles, reducing the size with 50%,
+                        while still having around 99% coverage.
+                config WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                    bool "Do not use the default certificate bundle"
+            endchoice
+
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                default n
+                bool "Add custom certificates to the default bundle"
+            config WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE_PATH
+                depends on WOLFSSL_CUSTOM_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+                string "Custom certificate bundle path"
+                help
+                    Name of the custom certificate directory or file. This path is evaluated
+                    relative to the project root directory.
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_DEPRECATED_LIST
+                bool "Add deprecated root certificates"
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL && !WOLFSSL_CERTIFICATE_BUNDLE_DEFAULT_NONE
+                help
+                    Include the deprecated list of root certificates in the bundle.
+                    This list gets updated when a certificate is removed from the Mozilla's
+                    NSS root certificate store. This config can be enabled if you would like
+                    to ensure that none of the certificates that were deployed in the product
+                    are affected because of the update to bundle. In turn, enabling this
+                    config keeps expired, retracted certificates in the bundle and it may
+                    pose a security risk.
+
+                    - Deprecated cert list may grow based based on sync with upstream bundle
+                    - Deprecated certs would be be removed in ESP-IDF (next) major release
+
+            config WOLFSSL_CERTIFICATE_BUNDLE_MAX_CERTS
+                int "Maximum no of certificates allowed in certificate bundle"
+                default 200
+                depends on WOLFSSL_CERTIFICATE_BUNDLE && ESP_TLS_USING_WOLFSSL
+
+        endmenu
+    endmenu # wolfSSL ESP-TLS
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    config ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+        bool "Modify default hardware acceleration settings"
+        default n
+        help
+            When disabling all hardware acceleration for smaller memory footprint,
+            disabling TFM fast math provides faster wolfSSL software algorithms in an
+            even smaller flash memory footprint.
+            Typically used for debugging, analysis, or optimizations. The default
+            hardware acceleration features can be each manually adjusted.
+
+    menu "wolfSSL Hardware Acceleration"
+
+        config ESP_WOLFSSL_NO_ESP32_CRYPT
+            bool "Disable all ESP32 Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_AES
+            select ESP_WOLFSSL_NO_HW_HASH
+            select ESP_WOLFSSL_NO_HW_RSA_PRI
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_ESP32_CRYPT.
+                Consider disabling FASTMATH (other libraries are faster in software and smaller)
+
+        config ESP_WOLFSSL_NO_HW_AES
+            bool "Disable all ESP32 AES Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.When selected defines: NO_HW_AES
+
+        config ESP_WOLFSSL_NO_HW_HASH
+            bool "Disable all ESP32 SHA Hash Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_HASH
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI
+            bool "Disable all ESP32 RSA Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            select ESP_WOLFSSL_NO_HW_PRI_MP_MUL
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            select ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MP_MUL
+            bool "Disable all ESP32 Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MP_MUL
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_MULMOD
+            bool "Disable all ESP32 Modular Multiplication Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default. When selected defines: NO_HW_RSA_PRI_MULMOD
+
+        config ESP_WOLFSSL_NO_HW_RSA_PRI_EXPTMOD
+            bool "Disable all ESP32 RSA Exponential Math Hardware Acceleration"
+            depends on ESP_WOLFSSL_ALT_HARDWARE_ACCELERATION
+            default n
+            help
+                Hardware acceleration enabled by default.
+                Select this option to force disable: NO_HW_RSA_PRI_EXPTMOD
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
+            bool "Enable debugging of RSA Multiplication operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                multiplication operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+        config ESP_WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+            bool "Enable debugging of RSA Modular operand length"
+            default n
+            help
+                Prints an esp log warning to the default console UART when one of the
+                modular math operands exceeds the maximum size supported by hardware,
+                requiring fallback to software. This can be helpful to pick key sizes
+                when performance is critical. See also metrics for counting instances.
+
+    endmenu # wolfSSL Hardware Acceleration
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Experimental Options"
+
+        config ESP_WOLFSSL_EXPERIMENTAL_SETTINGS
+            bool "Enable wolfSSL Experimental Settings"
+            default n
+            help
+                Enables experimental settings for wolfSSL. See documentation.
+
+        config ESP_WOLFSSL_ENABLE_KYBER
+            bool "Enable wolfSSL Kyber"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+    endmenu # wolfSSL Experimental Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Debug Options"
+        config ESP_WOLFSSL_DEBUG_WOLFSSL
+            bool "Enable wolfSSL Debugging"
+            default n
+            help
+                Enable debugging messages for wolfSSL. See user_settings.h for additional debug options.
+
+        config ESP_WOLFSSL_TEST_LOOP
+            bool "Run test apps in a loop until failure"
+            default y
+            help
+                Enable a loop wrapper for benchmark, http_client, and wolfssl test apps.
+
+    endmenu # wolfSSL Debug Options
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "wolfSSL Customization"
+        config CUSTOM_SETTING_WOLFSSL_ROOT
+            string "Enter a path for wolfSSL source code"
+            default "~/workspace/wolfssl"
+            help
+                This option lets you specify a directory for the wolfSSL source code (typically a git clone).
+                Enter the path using forward slashes (e.g., C:/myfolder/mysubfolder) or double backslashes
+                (e.g., C:\\myfolder\\mysubfolder).
+
+    endmenu # wolfSSL Customization
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Component Config"
+        config IGNORE_ESP_IDF_WOLFSSL_COMPONENT
+            bool "Ignore the ESP-IDF component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the esp-idf/components directory. Requires wolfssl as a local component.
+
+        config IGNORE_LOCAL_WOLFSSL_COMPONENT
+            bool "Ignore the local component of wolfSSL (if present)"
+            default n
+            help
+                Ignores wolfSSL present in the local project components directory.
+                Requires wolfssl as a ESP-IDF component.
+
+    endmenu # Component Config
+    # -----------------------------------------------------------------------------------------------------------------
+
+    # -----------------------------------------------------------------------------------------------------------------
+    menu "Utility Config"
+        config USE_WOLFSSL_ESP_SDK_TIME
+            bool "Enable wolfSSL time helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+        config USE_WOLFSSL_ESP_SDK_WIFI
+            bool "Enable wolfSSL WiFi helper functions"
+            default n
+            help
+                Enables use of various time and date setting functions found in the esp-sdk-lib.h file.
+
+    endmenu # Utility Config
+endmenu # wolfSSL
+# ---------------------------------------------------------------------------------------------------------------------
+
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfSSH"
+    config ESP_ENABLE_WOLFSSH
+        bool "Enable wolfSSH options"
+        default n
+        help
+            Enables WOLFSSH_TERM, WOLFSSL_KEY_GEN, WOLFSSL_PTHREADS, WOLFSSH_TEST_SERVER, WOLFSSH_TEST_THREADING
+
+    config ESP_WOLFSSL_DEBUG_WOLFSSH
+        bool "Enable wolfSSH debugging"
+        default n
+        help
+            Enable wolfSSH debugging macro. See user_settings.h
+
+endmenu # wolfSSH
+# ---------------------------------------------------------------------------------------------------------------------
+
+# ---------------------------------------------------------------------------------------------------------------------
+menu "wolfMQTT"
+    config ESP_ENABLE_WOLFMQTT
+        bool "Enable wolfMQTT options"
+        default n
+        help
+            Enables WOLFMQTT
+
+    config ESP_WOLFSSL_DEBUG_WOLFMQTT
+        bool "Enable wolfMQTT debugging"
+        default n
+        help
+            Enable wolfMQTT debugging macro. See user_settings.h
+
+endmenu # wolfMQTT
+# ---------------------------------------------------------------------------------------------------------------------

IDE/Espressif/ESP-IDF/examples/wolfssl_server/components/wolfssl/README.md

@@ -0,0 +1,162 @@
+# wolfSSL Espressif Component
+
+This is the directory for wolfSSL as an Espressif ESP-IDF component.
+
+Other options are available, such as installing wolfSSL as a local _project_ component using the [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/).
+
+Enabling this wolfSSL ESP-IDF component allows other ESP-IDF libraries such as those that depend on [ESP-TLS](https://github.com/espressif/esp-idf/tree/master/components/esp-tls)
+to also use the wolfSSL library. (See [github.com/wolfSSL/wolfssl](https://github.com/wolfSSL/wolfssl))
+
+The wolfSSL source code is not included here. Instead, the `idf.py menuconfig` option can be used to configure the
+`sdkconfig` file setting: `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` to point to the desired wolfSSL code.
+
+## Directory Contents
+
+This directory must contain, at a minimum:
+
+- `CMakeLists.txt`
+- `./include/user_settings.h`
+
+The directory should also contain:
+- `Kconfig`
+- `component.mk`
+
+The directory may contain wolfSSL source, for example with a [Managed Component](https://www.wolfssl.com/wolfssl-now-available-in-espressif-component-registry/),
+or if the `setup.sh` script was used from [wolfSSL/IDE/Espressif/ESP-IDF](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF).
+
+
+Under normal circumstances when the wolfSSL source is not included here, the `CMakeLists.txt` will search for it in this order:
+
+- A hard-coded `WOLFSSL_ROOT` cmake variable.
+- `WOLFSSL_ROOT` Environment Variable
+- The `CONFIG_CUSTOM_SETTING_WOLFSSL_ROOT` value in the `sdkconfig` file, from the `Kconfig` option.
+- Any parent directories, up to the root (if this directory is in the ESP-IDF components)
+- Any parent directories, up to the root (if this directory is a project component)
+
+While recursing up the directory tree, the following names of wolfSSL directories will be considered:
+
+- `wolfssl-[current user name]`
+- `wolfssl-master`
+- `wolfssl`
+
+## Getting Started
+
+See the `Espressif Getting Started Guide`.
+
+```
+# Set environment variable to ESP-IDF location
+# For example, VisualGDB in WSL
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32/esp-idf/v5.2
+WRK_IDF_PATH=/mnt/c/SysGCC/esp32-master/esp-idf/v5.3-master
+
+# Or wherever the ESP-IDF is installed:
+WRK_IDF_PATH=~/esp/esp-idf
+
+echo "Run export.sh from ${WRK_IDF_PATH}"
+. ${WRK_IDF_PATH}/export.sh
+
+cd [your project]
+
+idf.py menuconfig
+```
+
+Enable wolfSSL to be used in the ESP-TLS:
+
+```
+Component config  --->
+    ESP-TLS  --->
+        Choose SSL/TLS library for ESP-TLS (See help for more Info)
+            (X) wolfSSL (License info in wolfSSL directory README)
+```
+
+Adjust wolfSSL settings, such as path to source code as needed:
+
+```
+Component config  --->
+    wolfSSL  --->
+        [*] Include wolfSSL in ESP-TLS
+        [*] Use the specified wolfssl for ESP-TLS
+        (~/workspace/wolfssl) Enter a path for wolfSSL source code
+```
+
+## Configuration
+
+All settings for wolfSSL are adjusted in the [include/user_settings.h](./include/user_settings.h) file.
+
+The `user_settings.h` file should not be included directly. Instead, `#include <wolfssl/wolfcrypt/settings.h>`
+before any other wolfSSL headers, like this:
+
+
+```c
+/* ESP-IDF */
+#include <esp_log.h>
+#include "sdkconfig.h"
+
+/* wolfSSL */
+/* Always include wolfcrypt/settings.h before any other wolfSSL file.    */
+/* Reminder: settings.h pulls in user_settings.h; don't include it here. */
+#if defined(WOLFSSL_USER_SETTINGS)
+    #include <wolfssl/wolfcrypt/settings.h>
+    #if defined(WOLFSSL_ESPIDF)
+        #include <wolfssl/version.h>
+        #include <wolfssl/wolfcrypt/types.h>
+        #include <wolfcrypt/test/test.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+        #include <wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h>
+    #else
+        #error "Problem with wolfSSL user_settings. "           \
+               "Check components/wolfssl/include "              \
+               "and confirm WOLFSSL_USER_SETTINGS is defined, " \
+               "typically in the component CMakeLists.txt"
+    #endif
+#else
+    /* Define WOLFSSL_USER_SETTINGS project wide for settings.h to include   */
+    /* wolfSSL user settings in ./components/wolfssl/include/user_settings.h */
+    #error "Missing WOLFSSL_USER_SETTINGS in CMakeLists or Makefile:\
+    CFLAGS +=-DWOLFSSL_USER_SETTINGS"
+#endif
+```
+
+## Examples
+
+See the wolfSSL examples:
+
+- [wolfSSL Core Examples](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples)
+- [wolfSSL Additional Examples](https://github.com/wolfSSL/wolfssl-examples/tree/master/ESP32)
+- [wolfSSH Core Examples](https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples)
+- [wolfSSH Additional Examples](https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif)
+- [wolfMQTT Examples](https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples)
+
+## Platforms
+
+The ESP-IDF wolfSSL is also available for PlatformIO:
+
+- [Release wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl)
+- [Staging / Preview wolfSSL](https://registry.platformio.org/search?q=owner%3Awolfssl-staging)
+
+The wolfSSL library can also be used for Espressif with Arduino:
+
+- [arduino.cc/reference/en/libraries/wolfssl](https://www.arduino.cc/reference/en/libraries/wolfssl/)
+- [github.com/wolfSSL/Arduino-wolfSSL](https://github.com/wolfSSL/Arduino-wolfSSL)
+
+
+## Additional Information
+
+- [wolfSSL Documentation](https://www.wolfssl.com/documentation/manuals/wolfssl/index.html) and [docs/espressif](https://www.wolfssl.com/docs/espressif/)
+- [wolfSSL FAQ](https://www.wolfssl.com/docs/frequently-asked-questions-faq/)
+- [wolfSSL Products](https://www.wolfssl.com/products/)
+- [www.wolfssl.com/espressif](https://www.wolfssl.com/espressif/)
+- [More...](https://www.wolfssl.com/?s=espressif)
+
+## Contact
+
+Have a specific request or questions? We'd love to hear from you! Please contact us at support@wolfssl.com or open an issue on GitHub.
+
+## Licensing and Support
+
+wolfSSL (formerly known as CyaSSL) and wolfCrypt are either licensed for use under the GPLv2 (or at your option any later version) or a standard commercial license. For our users who cannot use wolfSSL under GPLv2 (or any later version), a commercial license to wolfSSL and wolfCrypt is available.
+
+See the LICENSE.txt, visit wolfssl.com/license, contact us at licensing@wolfssl.com or call +1 425 245 8247
+
+View Commercial Support Options: [wolfssl.com/products/support-and-maintenance](wolfssl.com/products/support-and-maintenance)
+

IDE/Espressif/ESP-IDF/examples/wolfssl_server/components/wolfssl/component.mk

@@ -18,6 +18,8 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
 #
 
+$(info ***********  wolfssl component ************)
+
 #
 # Component Makefile
 #
@@ -48,17 +50,61 @@
 # define it here:
 CFLAGS +=-DWOLFSSL_USER_SETTINGS
 
+# Note that 4 source files created by autogen are excluded here.
+#
+# See these files commented out, below. Adjust as needed for your application:
+#
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o
+
+
 # NOTICE: the WOLFSSL_ROOT setting MUST be relative!
 # See https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/api-guides/build-system.html?highlight=must+relative#optional-component-specific-variables
 # In the wolfSSL GitHub examples for Espressif:
 #   https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples
 # When this wolfssl component.mk makefile is in [project]/components/wolfssl
-# The root is 7 directories up from here:
+# The root is 7 directories up from here (the location of of this component.mk):
 WOLFSSL_ROOT := ../../../../../../..
 
-# NOTE: The wolfSSL include diretory (e.g. user_settings.h) is
+# To set the location of a different location, it is best to use relative paths.
+#
+# Set WOLFSSL_ROOT to a relative path from the current component directory.
+# For example, if the wolfssl_client is copied from the examples to test:
+#
+# cp -r /IDE/Espressif/ESP-IDF/examples/wolfssl_client/* /mnt/c/test/demo
+#
+# we run make in   /mnt/c/test/demo
+# component is in  /mnt/c/test/demo/components/wolfssl
+# wolfssl is in    /mnt/c/workspace/wolfssl-master
+#
+# "/mnt/c" is 4 directories up:
+#             2 for `./test/demo` from where we run `make`, plus
+#             2 more from the location of `component.mk` located
+#               in `[current directory]/components/wolfssl`.
+#
+# Thus we need 4 parent reference to find the relative path to wolfSSL:
+# WOLFSSL_ROOT := ../../../../workspace/wolfssl-master
+
+# Optional CFLAGS (make works without these; for reference only)
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt
+# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
+
+abs_WOLFSSL_ROOT := $(shell realpath $(WOLFSSL_ROOT))
+
+# print-wolfssl-path-value:
+#	@echo "WOLFSSL_ROOT defined: $(WOLFSSL_ROOT)"
+#	@echo "WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT)"
+
+$(info WOLFSSL_ROOT defined: $(WOLFSSL_ROOT))
+$(info WOLFSSL_ROOT actual:  $(abs_WOLFSSL_ROOT))
+
+# NOTE: The wolfSSL include directory (e.g. user_settings.h) is
 # located HERE in THIS project, and *not* in the wolfSSL root.
-COMPONENT_ADD_INCLUDEDIRS := ./include
+COMPONENT_ADD_INCLUDEDIRS := .
+COMPONENT_ADD_INCLUDEDIRS += include
 COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/.
 COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl
 COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt
@@ -118,7 +164,7 @@ COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/aes.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/arc4.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asm.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asn.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o # autogen exclusion
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2b.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2s.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/camellia.o
@@ -142,7 +188,7 @@ COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed25519.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed448.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/error.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
-# COMPONENT_OBJS += $(WOLFSSL_ROOT)wolfcrypt/src/ext_kyber.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_kyber.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_lms.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_xmss.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/falcon.o
@@ -174,7 +220,7 @@ COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rc2.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ripemd.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rsa.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sakke.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o # autogen exclusion
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha256.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha3.o
@@ -211,8 +257,8 @@ COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_lms.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_pkcs11.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_port.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_xmss.o
-COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o # autogen exclusion
-COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o
+# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o  # autogen exclusion
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfevent.o
 COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfmath.o
 
@@ -244,5 +290,7 @@ COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.
 ##
 ## wolfcrypt
 ##
-# COMPONENT_PRIV_INCLUDEDIRS += $(PROJECT_PATH)/components/wolfssl/include
+## COMPONENT_PRIV_INCLUDEDIRS += $(PROJECT_PATH)/components/wolfssl/include
-COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)wolfcrypt/src
+## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src
+
+$(info ********** end wolfssl component **********)

IDE/Espressif/ESP-IDF/examples/wolfssl_server/components/wolfssl/include/user_settings.h

@@ -1,4 +1,4 @@
-/* user_settings.h
+/* wolfssl-component include/user_settings.h
  *
  * Copyright (C) 2006-2024 wolfSSL Inc.
  *
@@ -18,18 +18,195 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
+#define WOLFSSL_ESPIDF_COMPONENT_VERSION 0x01
 
-/* Standardized wolfSSL Espressif ESP32 + ESP8266 user_settings.h V5.6.6-01 */
+/* The Espressif project config file. See also sdkconfig.defaults */
-
-/* This user_settings.h is for Espressif ESP-IDF */
-
 #include "sdkconfig.h"
 
-#define DEBUG_WOLFSSL
+/* This user_settings.h is for Espressif ESP-IDF
-/* #define DEBUG_WOLFSSL_VERBOSE */
+ *
+ * Standardized wolfSSL Espressif ESP32 + ESP8266 user_settings.h V5.7.0-1
+ *
+ * Do not include any wolfssl headers here.
+ *
+ * When editing this file:
+ * ensure all examples match. The template example is the reference.
+ */
+
+/* Naming convention: (see also esp32-crypt.h for the reference source).
+ *
+ * CONFIG_
+ *      This prefix indicates the setting came from the sdkconfig / Kconfig.
+ *
+ *      May or may not be related to wolfSSL.
+ *
+ *      The name after this prefix must exactly match that in the Kconfig file.
+ *
+ * WOLFSSL_
+ *      Typical of many, but not all wolfSSL macro names.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      May or may not have a corresponding sdkconfig / Kconfig control.
+ *
+ * ESP_WOLFSSL_
+ *      These are NOT valid wolfSSL macro names. These are names only used in
+ *      the ESP-IDF Kconfig files. When parsed, they will have a "CONFIG_"
+ *      suffix added. See next section.
+ *
+ * CONFIG_ESP_WOLFSSL_
+ *      This is a wolfSSL-specific macro that has been defined in the ESP-IDF
+ *      via the sdkconfig / menuconfig. Any text after this prefix should
+ *      exactly match an existing wolfSSL macro name.
+ *
+ *      Applies to all wolfSSL products such as wolfSSH, wolfMQTT, etc.
+ *
+ *      These macros may also be specific to only the project or environment,
+ *      and possibly not used anywhere else in the wolfSSL libraries.
+ */
+
+/* The Espressif sdkconfig will have chipset info.
+**
+** Some possible values:
+**
+**   CONFIG_IDF_TARGET_ESP32
+**   CONFIG_IDF_TARGET_ESP32S2
+**   CONFIG_IDF_TARGET_ESP32S3
+**   CONFIG_IDF_TARGET_ESP32C3
+**   CONFIG_IDF_TARGET_ESP32C6
+*/
+
+#undef  WOLFSSL_ESPIDF
+#define WOLFSSL_ESPIDF
+
+/* Test various user_settings between applications by selecting example apps
+ * in `idf.py menuconfig` for Example wolfSSL Configuration settings: */
+
+/* Turn on messages that are useful to see only in examples. */
+#define WOLFSSL_EXAMPLE_VERBOSITY
+
+/* Paths can be long, ensure the entire value printed during debug */
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+/* wolfSSL Examples: set macros used in example applications.
+ *
+ * These Settings NOT available in ESP-IDF (e.g. esp-tls)
+ *
+ * Any settings needed by ESP-IDF components should be explicitly set,
+ * and not by these example-specific settings via CONFIG_WOLFSSL_EXAMPLE_n
+ *
+ * ESP-IDF settings should be Kconfig "CONFIG_[name]" values when possible. */
+#if defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/template */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TEST)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_test */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define TEST_ESPIDF_ALL_WOLFSSL
+
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_BENCHMARK)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark */
+    /* We don't use WiFi, so don't compile in the esp-sdk-lib WiFi helpers: */
+    /* #define USE_WOLFSSL_ESP_SDK_WIFI */
+    #define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_CLIENT)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_client */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_TLS_SERVER)
+    /* See https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/wolfssl_server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfSSH Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFSSH_ECHOSERVER)
+    /* See https://github.com/wolfSSL/wolfssh/tree/master/ide/Espressif/ESP-IDF/examples/wolfssh_echoserver */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP32_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP32/ESP32-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_ESP8266_SSH_SERVER)
+    /* See https://github.com/wolfSSL/wolfssh-examples/tree/main/Espressif/ESP8266/ESP8266-SSH-Server */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfMQTT Examples */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_TEMPLATE)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/wolfmqtt_template */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_WOLFMQTT_AWS_IOT_MQTT)
+    /* See https://github.com/wolfSSL/wolfMQTT/tree/master/IDE/Espressif/ESP-IDF/examples/AWS_IoT_MQTT */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* wolfTPM Examples */
+#elif defined(CONFIG_WOLFTPM_EXAMPLE_NAME_ESPRESSIF)
+    /* See https://github.com/wolfSSL/wolfTPM/tree/master/IDE/Espressif */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Apple HomeKit Examples */
+#elif defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+    /* See https://github.com/AchimPieters/esp32-homekit-demo */
+
+/* no example selected */
+#elif defined(CONFIG_WOLFSSL_EXAMPLE_NAME_NONE)
+    /* We'll assume the app needs to use wolfSSL sdk lib function */
+    #define USE_WOLFSSL_ESP_SDK_WIFI
+
+/* Other applications detected by cmake */
+#elif defined(APP_ESP_HTTP_CLIENT_EXAMPLE)
+    /* The wolfSSL Version of the client example */
+    #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C2)
+        /* Less memory available, so smaller key sizes: */
+        #define FP_MAX_BITS (4096 * 2)
+    #else
+        #define FP_MAX_BITS (8192 * 2)
+    #endif
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+
+#elif defined(APP_ESP_HTTP_CLIENT)
+    /* The ESP-IDF Version */
+    #define FP_MAX_BITS (8192 * 2)
+    #define HAVE_ALPN
+    #define HAVE_SNI
+    #define OPENSSL_EXTRA_X509_SMALL
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define OPENSSL_EXTRA
+    #ifndef WOLFSSL_ALWAYS_VERIFY_CB
+       #define WOLFSSL_ALWAYS_VERIFY_CB
+    #endif
+    #ifndef WOLFSSL_VERIFY_CB_ALL_CERTS
+        #define WOLFSSL_VERIFY_CB_ALL_CERTS
+    #endif
+    #ifndef KEEP_PEER_CERT
+        #define KEEP_PEER_CERT
+    #endif
+#else
+    #ifdef WOLFSSL_ESPIDF
+        /* #warning "App config undetected" */
+    #endif
+    /* the code is older or does not have application name defined. */
+#endif /* Example wolfSSL Configuration app settings */
 
 /* Experimental Kyber */
-#if 0
+#ifdef CONFIG_WOLFSSL_ENABLE_KYBER
+    /* Kyber typically needs a minimum 10K stack */
     #define WOLFSSL_EXPERIMENTAL_SETTINGS
     #define WOLFSSL_HAVE_KYBER
     #define WOLFSSL_WC_KYBER
@@ -38,6 +215,7 @@
         /* With limited RAM, we'll disable some of the Kyber sizes: */
         #define WOLFSSL_NO_KYBER1024
         #define WOLFSSL_NO_KYBER768
+        #define NO_SESSION_CACHE
     #endif
 #endif
 
@@ -57,14 +235,72 @@
 **   CONFIG_IDF_TARGET_ESP32C6
 */
 
-#undef  WOLFSSL_ESPIDF
+/* Optionally enable Apple HomeKit from compiler directive or Kconfig setting */
-#define WOLFSSL_ESPIDF
+#if defined(WOLFSSL_APPLE_HOMEKIT) || defined(CONFIG_WOLFSSL_APPLE_HOMEKIT)
+     /* SRP is known to need 8K; slow on some devices */
+     #define FP_MAX_BITS (8192 * 2)
+     #define WOLFCRYPT_HAVE_SRP
+     #define HAVE_CHACHA
+     #define HAVE_POLY1305
+     #define WOLFSSL_BASE64_ENCODE
+ #endif /* Apple HomeKit settings */
 
-/* We don't use WiFi helpers yet, so don't compile in the esp-sdk-lib WiFi */
+/* Used by ESP-IDF components: */
-#define NO_ESP_SDK_WIFI
+#if defined(CONFIG_ESP_TLS_USING_WOLFSSL)
+    /* The ESP-TLS */
+    #ifndef FP_MAX_BITS
+        #if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+            defined(CONFIG_IDF_TARGET_ESP8684) || \
+            defined(CONFIG_IDF_TARGET_ESP8266)
+            /* Optionally set smaller size here */
+            #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+        #else
+            #define FP_MAX_BITS (4096 * 2)
+        #endif
+    #endif
+    #define HAVE_ALPN
+    #ifndef CONFIG_IDF_TARGET_ESP8266
+        /* Unless installed in the ESP8266 RTOS SDK locally, the wolfSSL
+         * API for SNI will not be seen in the components/esp-tls layer.
+         * Only enable SNI for non-ESP8266 targets by default: */
+        #define HAVE_SNI
+    #endif
+    #define OPENSSL_EXTRA_X509_SMALL
+
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+#endif
+
+/* Optionally enable some wolfSSH settings */
+#if defined(ESP_ENABLE_WOLFSSH) || defined(CONFIG_ESP_ENABLE_WOLFSSH)
+    /* The default SSH Windows size is massive for an embedded target.
+     * Limit it: */
+    #define DEFAULT_WINDOW_SZ 2000
+
+    /* These may be defined in cmake for other examples: */
+    #undef  WOLFSSH_TERM
+    #define WOLFSSH_TERM
+
+    /* optional debug */
+    /* #undef  DEBUG_WOLFSSH */
+    /* #define DEBUG_WOLFSSH */
+
+    #undef  WOLFSSL_KEY_GEN
+    #define WOLFSSL_KEY_GEN
+
+    #undef  WOLFSSL_PTHREADS
+    #define WOLFSSL_PTHREADS
+
+    #define WOLFSSH_TEST_SERVER
+    #define WOLFSSH_TEST_THREADING
+#endif /* ESP_ENABLE_WOLFSSH */
+
+
+/* Not yet using WiFi lib, so don't compile in the esp-sdk-lib WiFi helpers: */
+/* #define USE_WOLFSSL_ESP_SDK_WIFI */
 
 /*
- * ONE of these Espressif chipsets should be defined:
+ * ONE of these Espressif chip families will be detected from sdkconfig:
  *
  * WOLFSSL_ESP32
  * WOLFSSL_ESPWROOM32SE
@@ -83,11 +319,28 @@
 #endif
 /* See below for chipset detection from sdkconfig.h */
 
+/* when you want to use SINGLE THREAD. Note Default ESP-IDF is FreeRTOS */
+#define SINGLE_THREADED
+
 /* Small session cache saves a lot of RAM for ClientCache and SessionCache.
  * Memory requirement is about 5KB, otherwise 20K is needed when not specified.
  * If extra small footprint is needed, try MICRO_SESSION_CACHE (< 1K)
- * When really desperate, try NO_SESSION_CACHE.  */
+ * When really desperate or no TLS used, try NO_SESSION_CACHE.  */
-#define MICRO_SESSION_CACHE
+#define NO_SESSION_CACHE
+
+/* Small Stack uses more heap. */
+#define WOLFSSL_SMALL_STACK
+
+/* Full debugging turned off, but show malloc failure detail */
+/* #define DEBUG_WOLFSSL */
+#define DEBUG_WOLFSSL_MALLOC
+
+/* See test.c that sets cert buffers; we'll set them here: */
+#define USE_CERT_BUFFERS_256
+#define USE_CERT_BUFFERS_2048
+
+/* RSA_LOW_MEM: Half as much memory but twice as slow. */
+#define RSA_LOW_MEM
 
 /* optionally turn off SHA512/224 SHA512/256 */
 /* #define WOLFSSL_NOSHA512_224 */
@@ -102,19 +355,41 @@
 
 #define BENCH_EMBEDDED
 
-#define WOLFSSL_SMALL_STACK
-#define HAVE_ECC
-#define RSA_LOW_MEM
-
 /* TLS 1.3                                 */
-#define WOLFSSL_TLS13
+#ifdef CONFIG_WOLFSSL_ALLOW_TLS13
-#define HAVE_TLS_EXTENSIONS
+    #define WOLFSSL_TLS13
-#define WC_RSA_PSS
+    #define HAVE_TLS_EXTENSIONS
-#define HAVE_HKDF
+    #define HAVE_HKDF
-#define HAVE_AEAD
-#define HAVE_SUPPORTED_CURVES
 
-#define WOLFSSL_BENCHMARK_FIXED_UNITS_KB
+    /* May be required */
+    #ifndef HAVE_AEAD
+    #endif
+
+    /* Required for ECC */
+    #define HAVE_SUPPORTED_CURVES
+
+    /* Required for RSA */
+    #define WC_RSA_PSS
+
+    /* TLS 1.3 normally requires HAVE_FFDHE */
+    #if defined(HAVE_FFDHE_2048) || \
+        defined(HAVE_FFDHE_3072) || \
+        defined(HAVE_FFDHE_4096) || \
+        defined(HAVE_FFDHE_6144) || \
+        defined(HAVE_FFDHE_8192)
+    #else
+        #define HAVE_FFDHE_2048
+        /* #error "TLS 1.3 requires HAVE_FFDHE_[nnnn]" */
+    #endif
+#endif
+
+#if defined(CONFIG_IDF_TARGET_ESP32C2) || \
+    defined(CONFIG_IDF_TARGET_ESP8684)
+    /* Optionally set smaller size here */
+    #define HAVE_FFDHE_4096
+#else
+    #define HAVE_FFDHE_4096
+#endif
 
 #define NO_FILESYSTEM
 
@@ -131,30 +406,72 @@
 /* when you want to use SHA384 */
 #define WOLFSSL_SHA384
 
-#if defined(CONFIG_IDF_TARGET_ESP8266)
+/* Some features not enabled for ESP8266: */
+#if defined(CONFIG_IDF_TARGET_ESP8266) || \
+    defined(CONFIG_IDF_TARGET_ESP32C2)
     /* Some known low-memory devices have features not enabled by default. */
+    /* TODO determine low memory configuration for ECC. */
 #else
     /* when you want to use SHA512 */
     #define WOLFSSL_SHA512
 
     /* when you want to use SHA3 */
-    #define WOLFSSL_SHA3
+    /* #define WOLFSSL_SHA3 */
 
     /* ED25519 requires SHA512 */
     #define HAVE_ED25519
+#endif
 
-    #define HAVE_ECC
+#if defined(CONFIG_IDF_TARGET_ESP8266) || defined(CONFIG_IDF_TARGET_ESP32C2)
-    #define HAVE_CURVE25519
+    #define MY_USE_ECC 0
-    #define CURVE25519_SMALL
+    #define MY_USE_RSA 1
-    #define HAVE_ED25519
+#else
+    #define MY_USE_ECC 1
+    #define MY_USE_RSA 0
+#endif
+
+/* We can use either or both ECC and RSA, but must use at least one. */
+#if MY_USE_ECC || MY_USE_RSA
+    #if MY_USE_ECC
+        /* ---- ECDSA / ECC ---- */
+        #define HAVE_ECC
+        #define HAVE_CURVE25519
+        #define HAVE_ED25519
+        #define WOLFSSL_SHA512
+        /*
+        #define HAVE_ECC384
+        #define CURVE25519_SMALL
+        */
+    #else
+        #define WOLFSSH_NO_ECC
+        /* WOLFSSH_NO_ECDSA is typically defined automatically,
+         * here for clarity: */
+        #define WOLFSSH_NO_ECDSA
+    #endif
+
+    #if MY_USE_RSA
+        /* ---- RSA ----- */
+        /* #define RSA_LOW_MEM */
+
+        /* DH disabled by default, needed if ECDSA/ECC also turned off */
+        #define HAVE_DH
+    #else
+        #define WOLFSSH_NO_RSA
+    #endif
+#else
+    #error "Either RSA or ECC must be enabled"
 #endif
 
 /* Optional OpenSSL compatibility */
 /* #define OPENSSL_EXTRA */
 
-/* when you want to use pkcs7 */
+/* #Optional HAVE_PKCS7 */
 /* #define HAVE_PKCS7 */
+
 #if defined(HAVE_PKCS7)
+    /* HAVE_PKCS7 may enable HAVE_PBKDF2 see settings.h */
+    #define NO_PBKDF2
+
     #define HAVE_AES_KEYWRAP
     #define HAVE_X963_KDF
     #define WOLFSSL_AES_DIRECT
@@ -174,25 +491,11 @@
     /* #define CUSTOM_SLOT_ALLOCATION                              */
 #endif
 
-/* RSA primitive specific definition */
+/* WC_NO_CACHE_RESISTANT: slower but more secure */
-#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
+/* #define WC_NO_CACHE_RESISTANT */
-    /* Define USE_FAST_MATH and SMALL_STACK                        */
-    #define ESP32_USE_RSA_PRIMITIVE
 
-    #if defined(CONFIG_IDF_TARGET_ESP32)
+/* TFM_TIMING_RESISTANT: slower but more secure */
-
+/* #define TFM_TIMING_RESISTANT */
-        /* NOTE HW unreliable for small values! */
-        /* threshold for performance adjustment for HW primitive use   */
-        /* X bits of G^X mod P greater than                            */
-        #undef  ESP_RSA_EXPT_XBITS
-        #define ESP_RSA_EXPT_XBITS 32
-
-        /* X and Y of X * Y mod P greater than                         */
-        #undef  ESP_RSA_MULM_BITS
-        #define ESP_RSA_MULM_BITS  16
-
-    #endif
-#endif
 
 /* #define WOLFSSL_ATECC508A_DEBUG         */
 
@@ -203,37 +506,69 @@
 /* #define XTIME time */
 
 
-/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
+/* Adjust wait-timeout count if you see timeout in RSA HW acceleration.
-#define ESP_RSA_TIMEOUT_CNT    0x249F00
+ * Set to very large number and enable WOLFSSL_HW_METRICS to determine max. */
+#ifndef ESP_RSA_TIMEOUT_CNT
+	#define ESP_RSA_TIMEOUT_CNT 0xFF0000
+#endif
 
-#define HASH_SIZE_LIMIT /* for test.c */
+/* hash limit for test.c */
+#define HASH_SIZE_LIMIT
 
 /* USE_FAST_MATH is default */
 #define USE_FAST_MATH
 
 /*****      Use SP_MATH      *****/
-/* #undef USE_FAST_MATH          */
+/* #undef  USE_FAST_MATH         */
 /* #define SP_MATH               */
 /* #define WOLFSSL_SP_MATH_ALL   */
+/* #define WOLFSSL_SP_RISCV32    */
 
 /***** Use Integer Heap Math *****/
 /* #undef USE_FAST_MATH          */
 /* #define USE_INTEGER_HEAP_MATH */
 
+/* Just syntax highlighting to check math libraries: */
+#if defined(SP_MATH)               || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_INTEGER_HEAP_MATH) || \
+    defined(USE_FAST_MATH)         || \
+    defined(WOLFSSL_SP_MATH_ALL)   || \
+    defined(WOLFSSL_SP_RISCV32)
+#endif
+
+#define WOLFSSL_SMALL_STACK
+
+
 #define HAVE_VERSION_EXTENDED_INFO
 /* #define HAVE_WC_INTROSPECTION */
 
-#define  HAVE_SESSION_TICKET
+#ifndef NO_SESSION_CACHE
+    #define  HAVE_SESSION_TICKET
+#endif
 
 /* #define HAVE_HASHDRBG */
 
+#if 0
+/* Example for additional cert functions */
 #define WOLFSSL_KEY_GEN
-#define WOLFSSL_CERT_REQ
+    #define WOLFSSL_CERT_REQ
-#define WOLFSSL_CERT_GEN
+    #define WOLFSSL_CERT_GEN
-#define WOLFSSL_CERT_EXT
+    #define WOLFSSL_CERT_EXT
-#define WOLFSSL_SYS_CA_CERTS
+    #define WOLFSSL_SYS_CA_CERTS
 
-#define WOLFSSL_CERT_TEXT
+
+    #define WOLFSSL_CERT_TEXT
+
+    /* command-line options
+    --enable-keygen
+    --enable-certgen
+    --enable-certreq
+    --enable-certext
+    --enable-asn-template
+    */
+
+#endif
 
 #define WOLFSSL_ASN_TEMPLATE
 
@@ -253,11 +588,66 @@
 --enable-asn-template
 */
 
+/* optional SM4 Ciphers. See https://github.com/wolfSSL/wolfsm */
+/*
+#define WOLFSSL_SM2
+#define WOLFSSL_SM3
+#define WOLFSSL_SM4
+*/
+
+#if defined(WOLFSSL_SM2) || defined(WOLFSSL_SM3) || defined(WOLFSSL_SM4)
+    /* SM settings, possible cipher suites:
+
+        TLS13-AES128-GCM-SHA256
+        TLS13-CHACHA20-POLY1305-SHA256
+        TLS13-SM4-GCM-SM3
+        TLS13-SM4-CCM-SM3
+
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CBC-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-GCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "ECDHE-ECDSA-SM4-CCM-SM3"
+    #define WOLFSSL_ESP32_CIPHER_SUITE "TLS13-SM4-GCM-SM3:" \
+                                       "TLS13-SM4-CCM-SM3:"
+    */
+
+    #undef  WOLFSSL_BASE16
+    #define WOLFSSL_BASE16 /* required for WOLFSSL_SM2 */
+
+    #undef  WOLFSSL_SM4_ECB
+    #define WOLFSSL_SM4_ECB
+
+    #undef  WOLFSSL_SM4_CBC
+    #define WOLFSSL_SM4_CBC
+
+    #undef  WOLFSSL_SM4_CTR
+    #define WOLFSSL_SM4_CTR
+
+    #undef  WOLFSSL_SM4_GCM
+    #define WOLFSSL_SM4_GCM
+
+    #undef  WOLFSSL_SM4_CCM
+    #define WOLFSSL_SM4_CCM
+
+    #define HAVE_POLY1305
+    #define HAVE_CHACHA
+
+    #undef  HAVE_AESGCM
+    #define HAVE_AESGCM
+#else
+    /* default settings */
+    #define USE_CERT_BUFFERS_2048
+#endif
+
 /* Chipset detection from sdkconfig.h
  * Default is HW enabled unless turned off.
  * Uncomment lines to force SW instead of HW acceleration */
-#if defined(CONFIG_IDF_TARGET_ESP32)
+#if defined(CONFIG_IDF_TARGET_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
     #define WOLFSSL_ESP32
+    /*  Alternatively, if there's an ECC Secure Element present: */
+    /* #define WOLFSSL_ESPWROOM32SE */
+
     /* wolfSSL HW Acceleration supported on ESP32. Uncomment to disable: */
     /*  #define NO_ESP32_CRYPT                 */
     /*  #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
@@ -375,12 +765,16 @@
     #define WOLFSSL_ESP8266
 
     /* There's no hardware encryption on the ESP8266 */
-    /* Consider using the ESP32-C2/C3/C6
+    /* Consider using the ESP32-C2/C3/C6             */
-     * See https://www.espressif.com/en/products/socs/esp32-c2 */
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
     #define NO_WOLFSSL_ESP32_CRYPT_AES
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+    #ifndef FP_MAX_BITS
+        /* FP_MAX_BITS matters in wolfssl_test, not just TLS setting.   */
+        /* MIN_FFDHE_FP_MAX_BITS = (MIN_FFDHE_BITS * 2); see settings.h */
+        #define FP_MAX_BITS MIN_FFDHE_FP_MAX_BITS
+    #endif
     /***** END CONFIG_IDF_TARGET_ESP266 *****/
 
 #elif defined(CONFIG_IDF_TARGET_ESP8684)
@@ -392,7 +786,7 @@
     /***** END CONFIG_IDF_TARGET_ESP8684 *****/
 
 #else
-    /* Anything else encountered, disable HW accleration */
+    /* Anything else encountered, disable HW acceleration */
     #warning "Unexpected CONFIG_IDF_TARGET_NN value"
     #define NO_ESP32_CRYPT
     #define NO_WOLFSSL_ESP32_CRYPT_HASH
@@ -400,29 +794,84 @@
     #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
 #endif /* CONFIG_IDF_TARGET Check */
 
+/* RSA primitive specific definition, listed AFTER the Chipset detection */
+#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
+    /* Consider USE_FAST_MATH and SMALL_STACK                        */
+
+    #ifndef NO_RSA
+        #define ESP32_USE_RSA_PRIMITIVE
+
+        #if defined(CONFIG_IDF_TARGET_ESP32)
+            #ifdef CONFIG_ESP_MAIN_TASK_STACK_SIZE
+                #if CONFIG_ESP_MAIN_TASK_STACK_SIZE < 10500
+                    #warning "RSA may be difficult with less than 10KB Stack "/
+                #endif
+            #endif
+
+            /* NOTE HW unreliable for small values! */
+            /* threshold for performance adjustment for HW primitive use   */
+            /* X bits of G^X mod P greater than                            */
+            #undef  ESP_RSA_EXPT_XBITS
+            #define ESP_RSA_EXPT_XBITS 32
+
+            /* X and Y of X * Y mod P greater than                         */
+            #undef  ESP_RSA_MULM_BITS
+            #define ESP_RSA_MULM_BITS  16
+        #endif
+    #endif
+#endif
+
 /* Debug options:
 See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
 
+optionally increase error message size for very long paths.
+#define WOLFSSL_MAX_ERROR_SZ 500
+
+Turn wolfSSL debugging on/off:
+    wolfSSL_Debugging_ON();
+    wolfSSL_Debugging_OFF();
+
 #define ESP_VERIFY_MEMBLOCK
 #define DEBUG_WOLFSSL
 #define DEBUG_WOLFSSL_VERBOSE
 #define DEBUG_WOLFSSL_SHA_MUTEX
+#define WOLFSSL_DEBUG_IGNORE_ASN_TIME
+#define WOLFSSL_DEBUG_CERT_BUNDLE
+#define WOLFSSL_DEBUG_CERT_BUNDLE_NAME
 #define WOLFSSL_ESP32_CRYPT_DEBUG
 #define WOLFSSL_ESP32_CRYPT_HASH_SHA224_DEBUG
 #define NO_RECOVER_SOFTWARE_CALC
 #define WOLFSSL_TEST_STRAY 1
 #define USE_ESP_DPORT_ACCESS_READ_BUFFER
 #define WOLFSSL_ESP32_HW_LOCK_DEBUG
+#define WOLFSSL_DEBUG_MUTEX
 #define WOLFSSL_DEBUG_ESP_RSA_MULM_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MOD_RSAMAX_BITS
+#define WOLFSSL_DEBUG_ESP_HW_MULTI_RSAMAX_BITS
 #define ESP_DISABLE_HW_TASK_LOCK
+#define ESP_MONITOR_HW_TASK_LOCK
+#define USE_ESP_DPORT_ACCESS_READ_BUFFER
+
+See wolfcrypt/benchmark/benchmark.c for debug and other settings:
+
+Turn on benchmark timing debugging (CPU Cycles, RTOS ticks, etc)
+#define DEBUG_WOLFSSL_BENCHMARK_TIMING
+
+Turn on timer debugging (used when CPU cycles not available)
+#define WOLFSSL_BENCHMARK_TIMER_DEBUG
 */
 
-#define WOLFSSL_ESPIDF_ERROR_PAUSE /* Pause in a loop rather than exit. */
+/* Pause in a loop rather than exit. */
+/* #define WOLFSSL_ESPIDF_ERROR_PAUSE */
+/* #define WOLFSSL_ESP32_HW_LOCK_DEBUG */
+
 #define WOLFSSL_HW_METRICS
 
-/* #define HASH_SIZE_LIMIT */ /* for test.c */
+/* for test.c */
+/* #define HASH_SIZE_LIMIT */
 
-/* #define NO_HW_MATH_TEST */ /* Optionally turn off HW math checks */
+/* Optionally turn off HW math checks */
+/* #define NO_HW_MATH_TEST */
 
 /* Optionally include alternate HW test library: alt_hw_test.h */
 /* When enabling, the ./components/wolfssl/CMakeLists.txt file
@@ -463,6 +912,12 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
  * There are various certificate examples in this header file:
  * https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/certs_test.h
  *
+ * To use the sample certificates in code (not recommended for production!):
+ *
+ *    #if defined(USE_CERT_BUFFERS_2048) || defined(USE_CERT_BUFFERS_1024)
+ *        #include <wolfssl/certs_test.h>
+ *    #endif
+ *
  * To use the sets of macros below, define *one* of these:
  *
  *    USE_CERT_BUFFERS_1024  - ECC 1024 bit encoded ASN1
@@ -540,6 +995,9 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
     #define WOLFSSL_BASE16
 #else
     #if defined(USE_CERT_BUFFERS_2048)
+        #define USE_CERT_BUFFERS_256
+        /* Be sure to include in app when using example certs: */
+        /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_2048
         #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_2048
         #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1
@@ -559,6 +1017,9 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
         #define CTX_CLIENT_KEY_TYPE  WOLFSSL_FILETYPE_ASN1
 
     #elif defined(USE_CERT_BUFFERS_1024)
+        #define USE_CERT_BUFFERS_256
+        /* Be sure to include in app when using example certs: */
+        /* #include <wolfssl/certs_test.h>                     */
         #define CTX_CA_CERT          ca_cert_der_1024
         #define CTX_CA_CERT_SIZE     sizeof_ca_cert_der_1024
         #define CTX_CA_CERT_TYPE     WOLFSSL_FILETYPE_ASN1
@@ -581,3 +1042,34 @@ See wolfssl/wolfcrypt/port/Espressif/esp32-crypt.h for details on debug options
         #error "Must define USE_CERT_BUFFERS_2048 or USE_CERT_BUFFERS_1024"
     #endif
 #endif /* Conditional key and cert constant names */
+
+/******************************************************************************
+** Sanity Checks
+******************************************************************************/
+#if defined(CONFIG_ESP_MAIN_TASK_STACK_SIZE)
+    #if defined(WOLFCRYPT_HAVE_SRP)
+        #if defined(FP_MAX_BITS)
+            #if FP_MAX_BITS <  (8192 * 2)
+                #define ESP_SRP_MINIMUM_STACK_8K (24 * 1024)
+            #else
+                #define ESP_SRP_MINIMUM_STACK_8K (28 * 1024)
+            #endif
+        #else
+            #error "Please define FP_MAX_BITS when using WOLFCRYPT_HAVE_SRP."
+        #endif
+
+        #if (CONFIG_ESP_MAIN_TASK_STACK_SIZE < ESP_SRP_MINIMUM_STACK)
+            #warning "WOLFCRYPT_HAVE_SRP enabled with small stack size"
+        #endif
+    #endif
+#else
+    #warning "CONFIG_ESP_MAIN_TASK_STACK_SIZE not defined!"
+#endif
+/* See settings.h for some of the possible hardening options:
+ *
+ *  #define NO_ESPIDF_DEFAULT
+ *  #define WC_NO_CACHE_RESISTANT
+ *  #define WC_AES_BITSLICED
+ *  #define HAVE_AES_ECB
+ *  #define HAVE_AES_DIRECT
+ */