diff --git a/IDE/STM32Cube/README.md b/IDE/STM32Cube/README.md
index df6acb9b5..03f8880df 100644
--- a/IDE/STM32Cube/README.md
+++ b/IDE/STM32Cube/README.md
@@ -10,7 +10,10 @@ These examples use the Cube HAL for STM32.
 
 ## Requirements
 
+You need both the STM32 IDE and the STM32 initialization code generator (STM32CubeMX) tools. The STM32CubeMX tool is used to setup a project which is used by the IDE to make any required code level changes and program / debug the STM32.
+
 * STM32CubeIDE: Integrated Development Environment for STM32 [https://www.st.com/en/development-tools/stm32cubeide.html](https://www.st.com/en/development-tools/stm32cubeide.html)
+* STM32CubeMX: STM32Cube initialization code generator [https://www.st.com/en/development-tools/stm32cubemx.html](https://www.st.com/en/development-tools/stm32cubemx.html)
 
 ## STM32 Cube Pack
 
@@ -24,16 +27,15 @@ These examples use the Cube HAL for STM32.
 
 ### STM32 Cube Pack Usage
 
-1. Create or open a Cube Project based on your hardware.
+1. Create or open a Cube Project based on your hardware. See the sections below for creating a project and finding the example projects.
 2. Under “Software Packs” choose “Select Components”.
 3. Find and check all components for the wolfSSL.wolfSSL packs (wolfSSL / Core, wolfCrypt / Core and wolfCrypt / Test). Close
 4. Under the “Software Packs” section click on “wolfSSL.wolfSSL” and configure the parameters.
 5. For Cortex-M recommend “Math Configuration” -> “Single Precision Cortex-M Math” for the fastest option.
-6. In "Project Manager" select the "STM32CubeIDE" toolchain.
-7. Generate Code
-8. Open the project in STM32CubeIDE
-9. The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
-10. To enable printf make the `main.c` changes below in the [STM32 Printf](#stm32-printf) section.
+6. Hit the "Generate Code" button
+7. Open the project in STM32CubeIDE
+8. The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
+9. To enable printf make the `main.c` changes below in the [STM32 Printf](#stm32-printf) section.
 
 ### STM32 Cube Pack Examples
 
@@ -45,6 +47,31 @@ To use an example:
 2. Choose "Import" -> "Import an Existing STM32CubeMX Configuration File (.ioc)".
 3. Browse to find the .ioc in `STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/Projects` and click finish.
 
+### Creating your own STM32CubeMX configuration
+
+If none of the examples fit your STM32 type then you can create your own in STM32CubeMX by doing the following:
+
+1. Create a project with the correct STM32 model.
+2. Click on the "Software Packs" drop down near the top and choose "Select Components".
+3. Expand the "wolfSSL" pack twice and check all the components. Then exit this menu.
+4. Under "System Core" select "SYS" and changed the "Timebase Source" to TIM1.
+5. Under "Timers" select "RTC" and make sure this is enabled.
+6. Under "Connectivity" enable whichever UART/USART you have a serial I/O connected to.
+7. Under "Middleware" select "FREERTOS" and change the interface to "CMSIS_V2".
+    1. Increase the "TOTAL_HEAP_SIZE", preferably to 120000 but on smaller chips such as the F107 you may only be able to increase this to 40000.
+    2. Enable "USE_MALLOC_FAILED_HOOK".
+    3. Change "CHECK_FOR_STACK_OVERFLOW" to "Option2".
+    4. Under "Tasks and Queues" select Add for a new task.
+    5. Set the "Task Name" to "wolfCrypt".
+    6. Set the "Stack Size" to 8960 or as high as you can close to that. The "Heap Usage" will show an error if this is too high.
+    7. Set the "Entry Function" to "wolfCryptDemo".
+    8. Set the "Code Generation Option" to "As external".
+8. In "Software Packs" select "wolfSSL" and change any options as required.
+9. Go to "Clock Configuration" and set the "HCLK" as high as the tool will let you.
+10. In "Project Manager" select the "STM32CubeIDE" toolchain.
+
+When you get to the IDE make sure you edit `wolfSSL.I-CUBE-wolfSSL_conf.h` to set the `HAL_CONSOLE_UART` to the correct one for your configuration.
+
 ## Configuration
 
 The settings for the wolfSSL CubeMX pack are in the generated `wolfSSL.I-CUBE-wolfSSL_conf.h` file. An example of a generated file can be found at `examples/configs/user_settings_stm32.h`.
@@ -142,6 +169,8 @@ Note: The Benchmark example uses float. To enable go to "Project Properties" ->
 
 In main.c make the following changes:
 
+This section needs to go below the `UART_HandleTypeDef` line, otherwise `wolfssl/wolfcrypt/settings.h` will error.
+
 ```c
 /* Retargets the C library printf function to the USART. */
 #include <stdio.h>
@@ -166,7 +195,11 @@ int _write(int file,char *ptr, int len)
     return len;
 }
 #endif
+```
 
+In the `main()` function make the follow `setvbuf()` additions after `HAL_Init()`.
+
+```c
 int main(void)
 {
     /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
diff --git a/IDE/STM32Cube/wolfssl_example.c b/IDE/STM32Cube/wolfssl_example.c
index 724e79770..14bf496a5 100644
--- a/IDE/STM32Cube/wolfssl_example.c
+++ b/IDE/STM32Cube/wolfssl_example.c
@@ -1496,12 +1496,15 @@ double current_time(void)
 {
 	RTC_TimeTypeDef time;
 	RTC_DateTypeDef date;
-	uint32_t subsec;
+	uint32_t subsec = 0;
 
 	/* must get time and date here due to STM32 HW bug */
 	HAL_RTC_GetTime(&hrtc, &time, FORMAT_BIN);
 	HAL_RTC_GetDate(&hrtc, &date, FORMAT_BIN);
+	/* Not all STM32 RTCs have subseconds in the struct */
+#ifdef RTC_ALARMSUBSECONDMASK_ALL
 	subsec = (255 - time.SubSeconds) * 1000 / 255;
+#endif
 
 	(void) date;
 
diff --git a/wolfcrypt/src/random.c b/wolfcrypt/src/random.c
index 722e49a1d..df8a2a736 100644
--- a/wolfcrypt/src/random.c
+++ b/wolfcrypt/src/random.c
@@ -2522,7 +2522,7 @@ int wc_GenerateSeed(OS_Seed* os, byte* output, word32 sz)
 #elif defined(WOLFSSL_SAFERTOS) || defined(WOLFSSL_LEANPSK) || \
       defined(WOLFSSL_IAR_ARM)  || defined(WOLFSSL_MDK_ARM) || \
       defined(WOLFSSL_uITRON4)  || defined(WOLFSSL_uTKERNEL2) || \
-      defined(WOLFSSL_LPC43xx)  || defined(WOLFSSL_STM32F2xx) || \
+      defined(WOLFSSL_LPC43xx)  || defined(NO_STM32_RNG) || \
       defined(MBED)             || defined(WOLFSSL_EMBOS) || \
       defined(WOLFSSL_GENSEED_FORTEST) || defined(WOLFSSL_CHIBIOS) || \
       defined(WOLFSSL_CONTIKI)  || defined(WOLFSSL_AZSPHERE)
diff --git a/wolfcrypt/test/test.c b/wolfcrypt/test/test.c
index 8331055f9..41bea4efc 100644
--- a/wolfcrypt/test/test.c
+++ b/wolfcrypt/test/test.c
@@ -16343,7 +16343,7 @@ static int dh_ffdhe_test(WC_RNG *rng, const DhParams* params)
 
 done:
 
-#ifdef WOLFSSL_SMALL_STACK
+#if defined(WOLFSSL_SMALL_STACK) && !defined(WC_NO_RNG)
     if (priv)
         XFREE(priv, HEAP_HINT, DYNAMIC_TYPE_TMP_BUFFER);
     if (pub)