* Adds `EVP_PKCS82PKEY` and `d2i_PKCS8_PRIV_KEY_INFO`.
* Adds `EVP_PKEY2PKCS8` and `i2d_PKCS8_PRIV_KEY_INFO`.
* Adds `ECDSA_verify`.
* Fix to allow `SHA256()` and `MD5()` with FIPSv2.
* Decouple crypto callbacks and hash flags
* Fix for possible use of uninitialized when building TLS bench without TLS v1.3.
* Fix for building with `NO_CHECK_PRIVATE_KEY`. Test `./configure --disable-pkcs12 --enable-opensslextra CFLAGS="-DNO_CHECK_PRIVATE_KEY"`.
* Fix to support `RSA_public_decrypt` for PKCSv15 only with FIPS.
* Cleanup `RSA_public_encrypt`, `RSA_public_decrypt` and `RSA_private_decrypt`.
* Added instructions for building wolfSSL with Android kernel.
manual run of RNG init and JDKEK print
job ring does initial rng
is successful on some red key blob operations
caam red key blob test pass
ecdsa sign/verify
ecdsa ecdh/sign/verify with black secure key
ecdsa ecdh/sign/verify with black secure key
initial cmac addition
initial cmac addition
black blob encap
black keys with cmac
add invalidate memory
refactoring and clean up
more code cleanup
add files for dist and remove some printf's
remove unneeded macro guard
use resource manager
* Added detection for buffer alignment to avoid memcpy.
* Added MD5 and SHA-1 support for XTRANSFORM_LEN to process blocks.
* Cleanups for consistency between algorithms and code commenting.
* Enhancement for NXP MMCAU to process more than one block at a time.
* Improved MMCAU performance: SHA-1 by 35%, SHA-256 by 20% and MD5 by 78%.
```
NXP K64 w/MMCAU after:
MD5 8 MB took 1.000 seconds, 7.910 MB/s
SHA 4 MB took 1.005 seconds, 3.644 MB/s
SHA-256 2 MB took 1.006 seconds, 2.306 MB/s
NXP K64 w/MMCAU before:
MD5 4 MB took 1.004 seconds, 4.450 MB/s
SHA 3 MB took 1.006 seconds, 2.670 MB/s
SHA-256 2 MB took 1.008 seconds, 1.913 MB/s
```
* Adds crypto HW support for AES Direct and AES CCM.
* Fixes to enable PIC32MZ hardware hashing where updates are cached via heap buffer and final performs single operations against hardware.
* Fix for benchmark with 1024-bit certs passing in wrong size for `wc_RsaPrivateDecrypt` when using `USE_CERT_BUFFERS_1024`.
* Fix to resolve missing `strncasecmp` for the Microchip XC32. Workaround to use case sensitive version instead. This error occurred when building with HAVE_ECC defined in Harmony with XC32.
* Cleanup of the PIC32MZ crypto and hashing hardware code. Replace `pic32mz-hash.c` with `pic32mz-crypt.c`
* Add user_settings.h for mplabx and mcapi examples.
* Sync up with Harmony changes for MCAPI.
* Adds ./configure "--with-intelqa=../QAT1.6”, port files, memory management and README.md (see wolfcrypt/src/port/intel/).
* Added Intel QAT support for RSA public/private (CRT/non-CRT), AES CBC/GCM, ECDH/ECDSA, DH, DES3, SHA, SHA224, SHA256, SHA384, SHA512, MD5 and HMAC.
* wolfSSL async enabled all client and server: PKI, Encrypt/Decrypt, Hashing/HMAC and Certificate Sign/Verify.
* wolfSSL async support in functions: Encrypt, Decrypt, VerifyMAC, BuildMessage, ConfirmSignature, DoCertificate, ParseCertRelative, and MakeSignature.
* wolfCrypt test and benchmark async support added for all HW acceleration.
* wolfCrypt benchmark multi-threading support.
* Added QuickAssist memory overrides for XMALLOC, XFREE and XREALLOC. XREALLOC determines if existing pointer needs reallocated for NUMA.
* Refactor to make sure “heap” is available for async dev init.
* Added async support for all examples for connect, accept, read and write.
* Added new WC_BIGINT (in wolfmath.c) for async hardware support.
* Added async simulator tests for DES3 CBC, AES CBC/GCM.
* Added QAT standalone build for unit testing.
* Added int return code to SHA and MD5 functions.
* Refactor of the async stack variable handling, so async operations have generic args buffer area and cleanup function pointer.
* Combined duplicate code for async push/pop handling.
* Refactor internal.c to add AllocKey / FreeKey.
* Refactor of hash init/free in TLS to use InitHashes and FreeHashes.
* Refactor of the async event->context to use WOLF_EVENT_TYPE_ASYNC_WOLFSSL for WOLFSSL* and WOLF_EVENT_TYPE_ASYNC_WOLFCRYPT for WC_ASYNC_DEV*.
* Suppress error message for WC_PENDING_E.
* Implemented "wolfSSL_EVP_MD_CTX_init" to do memset.
* Cleanup of the openssl compat CTX sizes when async is enabled.
* Cleanup of AES, DES3, DH, SHA, MD5, DES3, DH, HMAC, MD5 for consistency and readability.
* Cleanup of the OPAQUE_LEN.
* Cleanup to use ENCRYPT_LEN instead of sizeof(ssl->arrays.preMasterSecret).
* Changed ssl->arrays.preMasterSecret to use XMALLOC (accelerates HW operations)
* Reduce verbosity with debug enabled for "GetMyVersion", "wolfSSL Using RSA OAEP padding" and "wolfSSL Using RSA PKCSV15 padding".
* Updated RSA un-padding error message so its different than one above it for better debugging.
* Added QAT async enables for each algorithm.
* Refactor of the async init to use _ex.
* Added WC_ASYNC_THRESH_NONE to allow bypass of the async thresholds for testing.
* Reformatted the benchmark results:
PKI: "RSA 2048 private HW 18522 ops took 1.003 sec, avg 0.054 ms, 18467.763 ops/sec"
Crypto/Hashing: SHA-256 SW 350 megs took 1.009 seconds, 346.946 MB/s Cycles per byte = 9.87
* Added min execution time for all benchmarks.
* Moved wc_*GetHash and wc_*RestorePos to appropriate files so use of isCopy flag is local.
* Fix for ECC sign status sometimes being invalid due to uninitialized ECC digest in benchmark.
* Added new DECLARE_VAR/FREE_VAR and DECLARE_ARRAY/FREE_ARRAY macros for helping setup test/benchmark variables to accelerate async.
* Added NO_SW_BENCH option to only run HW bench.
* Added support for PRNG to use hardware SHA256 if _wc devId provided.
* Fix to prevent curve tests from running against wrong curve sizes. Changed wc_ecc_set_curve to match on exact size.
* Added the wc_*GetHash calls to the wolfCrypt tests.
* Added async hardware start/stop to wolfSSL init/cleanup.
* Refactor to add wc_*Copy for hashing context (for async), which replaces wc_*RestorePos.
* Fixes for building with TI hashing (including: SHA224, missing new API’s and building with dummy build for non hw testing). Note: We need to add build test for this `./configure CFLAGS="-DWOLFSSL_TI_HASH -DTI_DUMMY_BUILD”`.
* Added arg checks on wc_*GetHash and wc_*Copy.
* Cleanup of the BuildMD5, BuildSHA, BuildMD5_CertVerify and BuildSHA_CertVerify functions.
* Added new ./configure --enable-asyncthreads, to allow enable/disable of the async threading support. If --enable-asynccrypt set this will be enabled by default if pthread is supported. Allows multi-threaded benchmarks with async simulator.
* Added checks for all hashing to verify valid ->buffLen.
* Fix for SHA512 scan-build warning about un-initialized “W_X”.
* Fix for valgrind un-initialized use of buffer in AllocDer (der->buffer) and BuildTlsFinished handshake_hash.
* Refactor of the benchmarking to use common function for start, check and finish of the stats.
* Fixed issue with ECC cache loading in multi-threading.
* Fix bug with AESNI not aligned code that assumes XMALLOC is 16-byte aligned.
* Added new WC_ASYNC_NO_… options to allow disabling of individual async algorithms. New defines are: WC_ASYNC_NO_CRYPT, WC_ASYNC_NO_PKI and WC_ASYNC_NO_HASH. Additionally each algorithm has a WC_ASYNC_NO_[ALGO] define.
* Added “wolfSSL_GetAllocators” API and fixed the wolfCrypt memcb_test so it restores callback pointers after test is complete (fixes issue with using custom allocators and test breaking it).
