wolfSSL/wolfssl
1
0
Fork 1
mirror of https://github.com/wolfSSL/wolfssl.git synced 2026-07-10 00:10:55 +02:00
Code Issues Packages Projects Releases Wiki Activity
Files
9918a1177a2dfcf6594de59487bfbcffc367bd51
wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/component.mk
T
Tobias Frauenschläger 9393d62591 Replace liboqs SPHINCS+ with SLH-DSA in certificate layer 
Replace the liboqs-based pre-standardization SPHINCS+ implementation
with the native FIPS 205 SLH-DSA implementation across the
certificate / ASN.1 / X.509 layers, and add SLH-DSA-rooted test
certificates plus TLS 1.3 .conf scenarios that exercise the new
verification path. All liboqs SPHINCS+ code is removed.

This enables SLH-DSA for certificate chain authentication: CA
certificates signed with SLH-DSA, certificate signature verification
against an SLH-DSA root. TLS 1.3 entity authentication via
CertificateVerify with SLH-DSA will be added in a follow-up PR.

Follows RFC 9909 (X.509 Algorithm Identifiers for SLH-DSA) and
NIST FIPS 205. Supports both SHAKE and SHA-2 parameter families
across all twelve standardized variants.

DER codec:
- New PrivateKeyDecode, PublicKeyDecode, KeyToDer, PrivateKeyToDer,
  PublicKeyToDer with RFC 9909 encoding (bare OCTET STRING containing
  4*n raw bytes = SK.seed || SK.prf || PK.seed || PK.root, no nested
  wrapper). OID auto-detection across all twelve SHAKE / SHA-2 variants.
- PublicKeyDecode raw-bytes fast path mirrors wc_Falcon_PublicKeyDecode
  and wc_Dilithium_PublicKeyDecode so callers (notably
  wolfssl_x509_make_der and ConfirmSignature, which pass the raw
  BIT STRING contents stashed by StoreKey) decode correctly. Honours
  the caller's *inOutIdx start offset.
- Error paths in Private/PublicKeyDecode preserve params/flags/
  inOutIdx and only ForceZero the buffer half each helper actually
  writes; skip the wipe entirely on BAD_LENGTH_E (no bytes touched).
- ImportPublic uses |= on flags so a Private-then-Public import
  sequence retains FLAG_PRIVATE.

OID dispatch:
- 12 standardized NIST OIDs (6 SHAKE + 6 SHA-2) per RFC 9909. The
  pre-standardization OID-collision mechanism is removed since NIST
  OIDs do not collide.
- wc_SlhDsaOidToParam / wc_SlhDsaOidToCertType return NOT_COMPILED_IN
  (rather than -1) for recognised SLH-DSA OIDs whose parameter set
  isn't built; wc_IsSlhDsaOid recognises both. The x509 dispatch
  surfaces this as a precise diagnostic instead of the generic
  "No public key found".
- wc_GetKeyOID picks a placeholder parameter from whatever variant is
  compiled in and #errors at compile time if none is.
- asn_orig.c EncodeCert / EncodeCertReq accept SHA-2 SLH-DSA keyTypes
  alongside SHAKE.

Tests and fixtures:
- Test cert chain in certs/slhdsa/: SLH-DSA-SHAKE-128s and
  SLH-DSA-SHA2-128s self-signed roots that sign reused ML-DSA-44
  entity keys (server + client), plus the gen script
  (gen-slhdsa-mldsa-certs.sh, OpenSSL >= 3.5).
- New TLS 1.3 .conf scenarios under tests/suites.c dispatch:
  test-tls13-slhdsa-shake.conf, test-tls13-slhdsa-sha2.conf, and a
  wrong-CA negative test test-tls13-slhdsa-fail.conf.
- DER round-trip and on-disk decode tests; bench_slhdsa_*_key.der
  fixtures regenerated with wolfSSL's own encoder so the codec is
  pinned to RFC 9909.
- New unit test test_wc_slhdsa_x509_i2d_roundtrip exercises the raw
  PublicKeyDecode entry point that wolfssl_x509_make_der relies on.
- test_wc_slhdsa_check_key now tests both Public-then-Private and
  Private-then-Public import orderings.

Build / ABI:
- DYNAMIC_TYPE_SPHINCS = 98 kept as RESERVED with a tombstone comment
  for ABI stability; new code should use DYNAMIC_TYPE_SLHDSA (107).
- All build system / IDE project files updated; SPHINCS+ sources,
  headers, and test data removed.
- Dead bench_slhdsa_*_key arrays removed from gencertbuf.pl and
  certs_test.h; the .der files on disk drive the decode tests.
2026-04-30 18:32:07 +02:00

306 lines
14 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2026 wolfSSL Inc.
#
# This file is part of wolfSSL.
#
# wolfSSL is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# wolfSSL is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
#
$(info *********** wolfssl component ************)
#
# Component Makefile
#
#
# The Espressif Managed Components are only for newer versions of the ESP-IDF
# Typically only for ESP32[-x] targets and only for ESP-IDF v4.3 or later:
# See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-component-manager.html
# https://components.espressif.com/
#
# Usage:
#
# make flash
#
# make flash ESPPORT=/dev/ttyS55
#
# make flash ESPBAUD=9600
#
# make monitor ESPPORT=COM1
#
# make monitor ESPPORT=/dev/ttyS55 MONITORBAUD=115200
#
# export ESPPORT=/dev/ttyS55
#
# https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/get-started/index.html
#
# Although the project should define WOLFSSL_USER_SETTINGS, we'll also
# define it here:
CFLAGS +=-DWOLFSSL_USER_SETTINGS
# Note that 4 source files created by autogen are excluded here.
#
# See these files commented out, below. Adjust as needed for your application:
#
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o
# NOTICE: the WOLFSSL_ROOT setting MUST be relative!
# See https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/api-guides/build-system.html?highlight=must+relative#optional-component-specific-variables
# In the wolfSSL GitHub examples for Espressif:
# https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples
# When this wolfssl component.mk makefile is in [project]/components/wolfssl
# The root is 7 directories up from here (the location of of this component.mk):
#
WOLFSSL_ROOT ?= ../../../../../../..
THIS_DIR := $(shell pwd)
WOLFSSL_ROOT_OBJ := $(THIS_DIR)
# When running make from commandline or VisualGDB, the current path varies:
ifeq ("$(VISUALGDB_DIR)","")
# current path is typically /mnt/c/workspace/wolfssl-gojimmypi/IDE/Espressif/ESP-IDF/examples/wolfssl_test/build/wolfssl
$(info VISUALGDB_DIR build not detected. shell: $(shell echo $$SHELL))
else
# current path is typically /C/workspace/wolfssl-gojimmypi/IDE/Espressif/ESP-IDF/examples/wolfssl_test/build/Debug/wolfssl
$(info Detected VisualGDB in: $(VISUALGDB_DIR) shell: $(shell echo $$SHELL))
endif
# To set the location of a different location, it is best to use relative paths.
#
# Set WOLFSSL_ROOT to a relative path from the current component directory.
# For example, if the wolfssl_client is copied from the examples to test:
#
# cp -r /IDE/Espressif/ESP-IDF/examples/wolfssl_client/* /mnt/c/test/demo
#
# we run make in /mnt/c/test/demo
# component is in /mnt/c/test/demo/components/wolfssl
# wolfssl is in /mnt/c/workspace/wolfssl-master
#
# "/mnt/c" is 4 directories up:
# 2 for `./test/demo` from where we run `make`, plus
# 2 more from the location of `component.mk` located
# in `[current directory]/components/wolfssl`.
#
# Thus we need 4 parent reference to find the relative path to wolfSSL:
# WOLFSSL_ROOT := ../../../../workspace/wolfssl-master
# Optional CFLAGS (make works without these; for reference only)
# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl
# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt
# CFLAGS += -I$(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
abs_WOLFSSL_ROOT := $(shell realpath $(WOLFSSL_ROOT))
# print-wolfssl-path-value:
# @echo "WOLFSSL_ROOT defined: $(WOLFSSL_ROOT)"
# @echo "WOLFSSL_ROOT actual: $(abs_WOLFSSL_ROOT)"
$(info WOLFSSL_ROOT defined: $(WOLFSSL_ROOT))
$(info WOLFSSL_ROOT actual: $(abs_WOLFSSL_ROOT))
$(info THIS_DIR defined: $(THIS_DIR))
$(info WOLFSSL_ROOT_OBJ defined: $(WOLFSSL_ROOT_OBJ))
# NOTE: The wolfSSL include directory (e.g. user_settings.h) is
# located HERE in THIS project, and *not* in the wolfSSL root.
COMPONENT_ADD_INCLUDEDIRS := .
COMPONENT_ADD_INCLUDEDIRS += include
COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/.
COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl
COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt
COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfssl/wolfcrypt/port/Espressif
# COMPONENT_ADD_INCLUDEDIRS += $ENV(IDF_PATH)/components/freertos/include/freertos
# COMPONENT_ADD_INCLUDEDIRS += "$ENV(IDF_PATH)/soc/esp32s3/include/soc"
# wolfSSL
COMPONENT_SRCDIRS := $(WOLFSSL_ROOT)/src
# wolfcrypt
COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src
# Espressif
COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif
COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/atmel
COMPONENT_OBJEXCLUDE := $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/aes_asm.o
COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/evp.o
COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/misc.o
COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/sha512_asm.o
COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/fe_x25519_asm.o
COMPONENT_OBJEXCLUDE += $(WOLFSSL_ROOT_OBJ)/wolfcrypt/src/aes_gcm_x86_asm.o
##
## wolfSSL
##
## reminder object files may end up in `./build` or `build/debug` or `build/release`, depending on build environment & settings.
##
# COMPONENT_OBJS := $(WOLFSSL_ROOT)/src/bio.o # part of ssl.c, omitted to avoid "does not need to be compiled separately"
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/conf.o # part of ssl.c
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/crl.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/dtls13.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/internal.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/keys.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ocsp.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/pk.o # part of ssl.c
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/quic.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/sniffer.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/ssl.o
# COMPONENT_OBJS += src/ssl_asn1.o
# COMPONENT_OBJS += src/ssl_bn.o
# COMPONENT_OBJS += src/ssl_certman.o
# COMPONENT_OBJS += src/ssl_crypto.o
# COMPONENT_OBJS += src/ssl_misc.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/tls13.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/wolfio.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/x509.o # part of ssl.c
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/src/x509_str.o # part of ssl.c
##
## wolfcrypt
##
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/aes.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/arc4.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asm.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/asn.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/async.o # autogen exclusion
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2b.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/blake2s.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/camellia.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/chacha20_poly1305.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cmac.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/coding.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/compress.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cpuid.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/cryptocb.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve25519.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/curve448.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/des3.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dh.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dilithium.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/dsa.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/eccsi.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ecc_fp.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed25519.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ed448.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/error.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/evp.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_lms.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ext_xmss.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/falcon.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_448.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_low_mem.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fe_operations.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/fips_test.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_448.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_low_mem.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ge_operations.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hash.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hmac.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/hpke.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/integer.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/kdf.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/logging.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md2.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md4.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/md5.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/memory.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/misc.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs12.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pkcs7.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/poly1305.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/pwdbased.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/random.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rc2.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/ripemd.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/rsa.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sakke.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/selftest.o # autogen exclusion
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha256.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha3.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sha512.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/signature.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/siphash.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm2.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm3.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sm4.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm32.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_arm64.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_armthumb.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c32.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_c64.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_cortexm.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_dsp32.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_int.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm32.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_arm64.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_armthumb.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c32.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_c64.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_cortexm.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_sm2_x86_64.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/sp_x86_64.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/srp.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/tfm.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_dsp.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_encrypt.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_mlkem.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_mlkem_poly.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_lms.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_pkcs11.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_port.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_slhdsa.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wc_xmss.o
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_first.o # autogen exclusion
# COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfcrypt_last.o # autogen exclusion
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfevent.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/wolfmath.o
##
## Espressif
##
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_aes.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_mp.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_sha.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp32_util.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_mem_lib.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_time_lib.o
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.o
##
## wolfcrypt benchmark (needed for this benchmark example)
##
COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark/benchmark.o
COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfcrypt/benchmark
##
## wolfcrypt test (optional)
##
## COMPONENT_OBJS += $(WOLFSSL_ROOT)/wolfcrypt/test/test.o
## COMPONENT_SRCDIRS += $(WOLFSSL_ROOT)/wolfcrypt/test
## COMPONENT_ADD_INCLUDEDIRS += $(WOLFSSL_ROOT)/wolfcrypt/test/include
$(info ********** end wolfssl component **********)
Reference in New Issue View Git Blame Copy Permalink