EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 18:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant ADC (markdown)

Candas1
2022-01-02 11:45:14 +01:00
parent 5e24b51bae
commit 26b33ec1d1
1 changed files with 9 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Variant-ADC.md

@@ -1,15 +1,20 @@
This variant can be used with potentiometers or hall sensors.
This variant can be used with analog inputs like potentiometers, joysticks or throttle/brake handles, even if using hall sensors.
## Configuration/Parameters
* ADC_ALTERNATE_CONNECT : to swap the inputs, in case you cannot do it physically
* ADC_PROTECT_THRESH : to adjust the threshold below/above the MIN/MAX ADC values that will trigger ADC protection
* ADC_PROTECT_TIMEOUT : number of wrong / missing input commands before safety state is taken
## Wiring:
* Connect blue wire (ADC1) to steering and green wire (ADC2) to speed on left sensor board cable
* If you don’t need steering, set input1_type to 0 in order to disable the input or go through the auto-calibration procedure
* 100k Pull down resistors connected to ground are recommended to prevent issues when inputs are floating (wire is cut or disconnected)
* 100k Pull down resistors connected to ground are recommended to prevent issues when inputs are floating (wire is cut or disconnected) triggering ADC protection
⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port or a voltage regulator.
## Calibration:
Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control.
Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control and proper ADC protection.
## Troubleshooting:
If wheels are not spinning or the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)), make sure you have done proper calibration.
If wheels are not spinning or the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics), make sure you have done proper calibration.