EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant SKATEBOARD (markdown)

Candas1
2022-04-08 11:41:10 +02:00
parent b64cac9ab8
commit 2e932aabc6
1 changed files with 2 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
Variant-SKATEBOARD.md

@@ -8,10 +8,9 @@ You can use CONTROL_PWM_LEFT instead if you need to use the left sensor cable.<b
DEBUG_SERIAL will be automatically enabled on the opposite cable.<br> DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
## Wiring: ## Wiring:
* Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
* Connect the receiver signal to green wire on right sensor cable(shorter) * Connect the receiver signal to green wire on right sensor cable(shorter)
* Connect the receiver to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
⚠️ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
## Calibration: ## Calibration:
Proceed with [calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control.<br> Proceed with [calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control.<br>