EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 18:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant IBUS (markdown)

Candas1
2022-04-08 11:39:30 +02:00
parent ca4efbe22a
commit b64cac9ab8
1 changed files with 2 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
Variant-IBUS.md

@@ -9,10 +9,9 @@ Use CONTROL_SERIAL_USART3 and FEEDBACK_SERIAL_USART3 for the right sensor cable(
IBUS_NUM_CHANNELS is the number of channels for IBUS and is 14 by default. As an example Flysky fs-i6ab or RX2A receivers are sending 14 channels even when used with a 6 channel transmitter<br>
## Wiring:
* Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
* Connect IBUS/Servo port of your receiver to green wire on the cable selected in config.h
⚠️ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
* Connect the receiver to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
## Transmitter configuration:
* Enable IBUS