EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant Nunchuk (markdown)

Candas1
2020-12-16 23:17:11 +01:00
parent 7415049ecc
commit 4c80a2ca8a
1 changed files with 2 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
Variant-Nunchuk.md → Variant-NUNCHUK.md

@@ -2,7 +2,7 @@ This variant can be used with Wii Nunchuk (not the Wiimote).
## Wiring:
* Connect blue wire to SCL and green wire to SDA on right sensor board cable(shorter)
* 100k Pull up resistors connected to 3.3v are recommended to prevent issues when nunchuk is disconnected
* 100k Pull up resistors connected to 3.3v are recommended to prevent the board to go full speed if nunchuk is disconnected
|SCL|--|3.3v|
|-|-|-|
@@ -18,5 +18,6 @@ Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-ha
If the board is beeping
* On some boards the wire colors might differ, try switching blue and green cable
* Keep cable short, use shielded cable, use ferrits, stabilize voltage in nunchuk