mirror of
https://github.com/EFeru/hoverboard-firmware-hack-FOC.git
synced 2025-08-06 02:54:27 +02:00
Updated Battery (markdown)
@@ -29,10 +29,10 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
|
|||||||
* [Calibrate the battery voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#calibration)
|
* [Calibrate the battery voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#calibration)
|
||||||
* With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel
|
* With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel
|
||||||
* Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery
|
* Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery
|
||||||
* You can reduce the [current limit](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will lose power
|
* You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power
|
||||||
|
|
||||||
If the board turns off without the melody, the BMS is shutting the power off:
|
If the board turns off without the melody, the BMS is shutting the power off:
|
||||||
* You might be drawing too much current. You can reduce the [current limit](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) not to trigger the BMS over-discharge protection but you will lose power
|
* You might be drawing too much current. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn not to trigger the BMS over-discharge protection but you will reduce the power
|
||||||
* It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection
|
* It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection
|
||||||
You will have to unplug the battery and plug it again
|
You will have to unplug the battery and plug it again
|
||||||
|
|
||||||
|
Reference in New Issue
Block a user