Updated Battery (markdown)

Candas1
2022-06-03 14:28:22 +02:00
parent 8b65ab4147
commit adb23f4549

@@ -49,5 +49,7 @@ If the board turns off without the melody, the BMS is shutting the power off
* You are drawing too much current which triggers the over-discharge protection of your BMW. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will reduce the power
* It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection of your BMS
* When using phase advance/field weakening and braking, a voltage higher than the battery voltage can flow back to the battery and trigger the over-voltage protection of your BMS
You will have to unplug the battery and plug it again
You will have to unplug the battery and plug it again
The board is not turning off when you push the ON/OFF button:
* This might happen is you are using a battery that has too low voltage