EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 18:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PWM (markdown)

Candas1
2021-07-06 13:50:55 +02:00
parent 4a3977b9b7
commit bef8cdd631
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Variant-PWM.md

@@ -3,6 +3,7 @@ This variant can be used with Pulse Width Modulation RC Receivers.
## Wiring:
* Connect channel 1 of your receiver to blue wire and channel 2 to green wire on right sensor cable(shorter)
* PWM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage
⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
@@ -15,5 +16,4 @@ Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-ha
## Troubleshooting:
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
* Make sure you are using the sensor cable(left or right) selected in config.h
* PWM is highly prone to noise, keep cables short, use shielded cable, use ferrites, stabilize voltage
* Make sure you are using the sensor cable(left or right) selected in config.h