EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 10:34:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant NUNCHUK (markdown)

Candas1
2022-04-21 09:56:39 +02:00
parent 7857a25caa
commit c8c3b8eb20
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Variant-NUNCHUK.md

@@ -1,6 +1,6 @@
This variant can be used with Wii Nunchuk (not the Wiimote).
## Wiring:
## :electric_plug: Wiring:
* Connect nunchuk's VCC to 3.3v from programming port or from a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
* Connect blue wire to SCL and green wire to SDA on right sensor board cable(shorter)
* Connect nunchuk to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
@@ -12,10 +12,10 @@ This variant can be used with Wii Nunchuk (not the Wiimote).
Recommendation: Nunchuk Breakout Board https://github.com/Jan--Henrik/hoverboard-breakout
## Calibration:
## :control_knobs: Calibration:
Proceed with [calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control.
## Troubleshooting:
## :toolbox: Troubleshooting:
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
* On some boards the wire colors might differ, try switching blue and green cable