EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 10:34:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant SKATEBOARD (markdown)

Candas1
2022-09-20 13:56:02 +02:00
parent f9cd31bdc5
commit e0188dfebb
1 changed files with 4 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
Variant-SKATEBOARD.md

@@ -26,3 +26,6 @@ This variant is expecting only one mid-resting input, calibration will be reject
## :toolbox: Troubleshooting: ## :toolbox: Troubleshooting:
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
* Make sure you are using the sensor cable(left=CONTROL_PWM_LEFT or right=CONTROL_PWM_RIGHT) selected in config.h * Make sure you are using the sensor cable(left=CONTROL_PWM_LEFT or right=CONTROL_PWM_RIGHT) selected in config.h
* You might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable
If you get unwanted movements, check the wiring section.