EFeru/hoverboard-firmware-hack-SIN
1
0
Fork 0
forked from lucysrausch/hoverboard-firmware-hack
Code Pull Requests Activity

Merge branch 'master' of https://github.com/EmanuelFeru/hoverboard-firmware-hack

Browse Source
This commit is contained in:
EmanuelFeru
2019-05-28 22:43:55 +02:00
parent ade9a15438 7f9bbec505
commit f279ff4361
1 changed files with 4 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@ -9,7 +9,6 @@ This repository improves significantly the performance of the previous BLDC moto
- automatic phase advance / field weakening
![Schematic representation of the control methods](https://github.com/EmanuelFeru/hoverboard-firmware-hack/blob/master/01_Matlab/02_Figures/control_methods.png)
![Hoverboard wheel](https://github.com/EmanuelFeru/hoverboard-firmware-hack/blob/master/docs/pictures/hoverboard_wheel.JPG)
A classification of the BLDC control methods in terms of performance is as follows:
|Control method| Torque output | Noise performance | Efficiency |
@ -23,8 +22,11 @@ A classification of the BLDC control methods in terms of performance is as follo
A short video showing the noise performance of the Commutation method vs Sinusoidal 3rd harmonic can be found here:
[►Video: Commutation method vs Sinusoidal 3rd harmonic](https://drive.google.com/file/d/1vC_kEkp2LE2lAaMCJcmK4z2m3jrPUoBD/view)
** A more detailed and better movie will come soon... so stay tuned ;)
![Hoverboard wheel](https://github.com/EmanuelFeru/hoverboard-firmware-hack/blob/master/docs/pictures/hoverboard_wheel.JPG | width=640)
---
GENERAL NOTES:
- All the calibratable motor parameters can be found in the 'BLDC_controller_data.c'. I provided you with an already calibrated controller, but if you feel like fine tuning it feel free to do so.
@ -51,7 +53,7 @@ Additionally, you can also flash using the method described below in the Flashin
---
## Hardware
![otter](https://raw.githubusercontent.com/NiklasFauth/hoverboard-firmware-hack/master/pinout.png)
![otter](https://raw.githubusercontent.com/NiklasFauth/hoverboard-firmware-hack/master/pinout.png | width=48)
The original Hardware supports two 4-pin cables that originally were connected to the two sensor boards. They break out GND, 12/15V and USART2&3 of the Hoverboard mainboard.
Both USART2 & 3 can be used for UART and I2C, PA2&3 can be used as 12bit ADCs.